- Abstract
- 10.1016/0140-6701(95)80296-7
Apparatus for cooling and cleaning raw gases from coal gasifiers
- Jan 01, 1995
- Fuel and Energy Abstracts
Apparatus for cooling and cleaning raw gases from coal gasifiers
With research and technology (R&T) development activities for the next generation SuperSonic Transport (SST) being pursued globally over the past few years, the options to proposed airframe and engine concepts appears to be converging. The United States, the Europeans, and the Japanese are all engaged in developing the technologies needed for a future SST that is environmentally compatible and economically practical. Boeing and McDonnell Douglas are part of the team under an R&T contract with the National Aeronautics and Space Administration to develop critical components and enabling materials that will allow industry to make a production decision by 2003. Europe’s three main aircraft manufacturer’s — i.e., Aerospatiale, British Aero-space, and Deutsche Aerospace — comprise the European Supersonic Research Program (ESRP). A primary Japanese effort called the Hypersonic Transport Propulsion System Research (HYPR) project consists of a consortium of four international engine manufacturers and the National Japanese Laboratory. The manufacturers are: Ishikawajima-Harima Heavy Industries Co. Ltd., the Kawasaki Heavy Industries Co. Ltd., Mitsubishi Heavy Industries Co. Ltd., and General Electric Aircraft Engines Company, USA. A recent study by the Japan Aircraft Development Corporation (Reference 1) also addressed the technology requirements for the next generation SST. There are basically three major challenges that must be met before a new SST can become a reality. They are the technical, environmental, and economic challenges. The technical challenges of the propulsion system primarily reduce the development of new materials capable of sustaining higher temperatures and vibration (high and low frequency) over longer exposure times as well as capable of being produced at reasonable costs. Low emission combustors and low exhaust jet noise are the primary environmental challenges, which are a technical challenge in themselves. The economic challenge is to produce an aircraft and propulsion system that allows the manufacturers to recover development and manufacturing costs as well as realize a reasonable Return-On-Investment (ROI). In addition, Life Cycle Costs (LCC) must not be substantially above future subsonic airliners in order to justify premium fares the public would be willing to pay for the time savings of long-distance flights and still be profitable to the airlines.
Apparatus for cooling and cleaning raw gases from coal gasifiers
Apparatus for cooling and cleaning raw gases from coal gasifiers
An Improved Aerodynamic Inverse Design Method for Complex SST Configuration Combined with 3D NS Solver
A next generation Supersonic Transport (SST) is under research in Japan. The National Aerospace Laboratory (NAL) has been developing several experimental models of the SST since 1995. The project aims to reduce drag by aerodynamic shape design of a wing. The aerodynamic design of the first model which has no propulsion system was over in 1998. The full configuration model with propulsion system is currently being designed with the research for a better design method.
Read moreHigh Speed Civil Transport Propulsion Installation Issues
The integration of the propulsion system with the airframe is critical to the success of the High Speed Civil Transport (HSCT), a second generation supersonic civil transport aircraft. The installation of the propulsion system directly impacts the overall aircraft system aerodynamic performance and noise. This is especially true for a supersonic aircraft where the performance of the inlet and exhaust nozzle is more important to the aircraft than the performance of the turbomachinery. Careful consideration of potential safety issues, maintenance practices, and operational requirements, including the split of supersonic and subsonic flight, must be accounted for when establishing the installation approach. The installation design philosophy has a major impact on the propulsion and aircraft system weight, and consequently, the overall economic viability of the aircraft.
Read moreAdvanced supersonic transport design developments
Advanced technology studies have indicated a major payload/range improvement for the next generation supersonic transport while meeting stringent environmental requirements. The major technology advance is the variable-cycle engine. When integrated with efficient aerodynamic and structural concepts, the variable-cycle engine airplane will attain a design range of 5500 nautical miles with no penalty for take-off noise or subsonic missions. The goal - not achievable in past programs - will allow one airplane to compete subsonic in over-land sonic boom prohibited areas as well as over-water supersonic routes. This goal will not be achieved without an aggressive technology development program.
Read moreProposed Display Arrangement and Contents for Synthetic Vision System
<div class="htmlview paragraph">The Synthetic Vision System (SVS) is planned to be applied to provide cockpit forward view in the next generation Supersonic Transport (SST).</div> <div class="htmlview paragraph">Operational requirements for the SST landing system were examined and the necessity of the SVS was verified.</div> <div class="htmlview paragraph">Next, the SVS concept was evaluated by operational users. Following that, the method to improve the pilot's situation awareness, the requirements, and the device types for the SST cockpit display system were studied.</div> <div class="htmlview paragraph">Based on the results of these studies, proposed cockpit display arrangements with the contents were implemented.</div> <div class="htmlview paragraph">At last, issues to develop the system are identified.</div>
Read moreSupersonic drag reduction technology in the scaled supersonic experimental airplane project by JAXA
Supersonic drag reduction technology in the scaled supersonic experimental airplane project by JAXA
Directional sonar
Directional sonar
Supersonic wave converter
Supersonic wave converter
超細長双胴船型による高速フェリー
Ishikawajima-Harima Heavy Industries Co Ltd (IHI) and the University of Tokyo recently developed a fast ferry by applying the concept of super-slender twin hull (SSTH). Low wave-making resistance by a super-slender hull form contributes to good fuel economy. Good seaworthiness by a super-slender hull form and a specially designed bow shape have also been confirmed by means of a series of model tests. Principal features of a prototype design are as follows: length between perpendicular = 75m, breadth (moulded) = 19.4m, draught (moulded) = 2.3m, four sets of 6000 ps high-speed diesel as main engine. Both propeller and water jet are used as propulsion system. The hull structure is made of aluminium alloy. A small version of the SSTH ferry was scheduled to be launched in August 1991, and its advantages will be verified in the open sea.
Read moreComposites for Advanced Drive Systems, a Systems Analysis Revolutionary Vertical Lift Technology (RVLT)
Rotorcraft propulsion systems are continually looking to improve power density; that is reducing weight and increasing power capacity and efficiency. In order to advance rotorcraft propulsion system technology, NASA Glenn Research Center (NGRC) contracted Boeing Vertical Lift to perform system level benefit assessments of designing composite materials into rotorcraft transmission gear and shaft systems. In general, the environment inside a typical rotorcraft transmission creates issues for typical composite materials. In flight critical gears and shafts, design challenges and safety risks associated with introducing composite materials must be understood and accounted for in the design. Boeing was able to develop a technical approach for the system study that covered a relatively large population of rotorcraft main transmissions. This technical approach evaluated rotorcraft from various size classes and configurations and applied parametric estimating methods to assess the performance impact of composite hybrid technologies inside transmissions, in the rotating frame. Parametric weight estimating showed that composite hybrid technologies account for an average 9% weight savings over the baseline transmissions. More weight savings may be observed when various other aircraft systems are considered. Tandem and Tilt-rotor aircraft use similar transmissions at the forward/aft rotor head and left/right side of the aircraft, respectively, doubling estimated weight savings of a single transmission. Other aircraft systems, such as airframe, landing gear, and fuel systems benefit from reduced propulsion system weight, and, therefore, lighter weight aircraft are possible when propulsion system weight is reduced. In this paper, a systems level technical approach is summarized which was used to assess the performance impacts of introducing composite materials inside helicopter transmissions, in the rotating frame. Existing composite technologies, technical challenges, and general material selection guidance were used to develop the technical approach. Transmissions from a multitude of rotorcraft configurations and power classes were studied to build a database of expected performance gains. Component designs were developed using composite materials to varying levels of fidelity in order to develop data used for parametric weight estimating. The component designs are compiled and averaged with similar, existing designs in order to build a robust dataset for weight estimating purposes. Using information developed during the component design phase, technical challenges were defined.
Read moreDesign system for optimum contra-rotating propellers
A new type of contrarotating propeller (CRP) system has been developed through the cooperative research work of five shipbuilding companies in Japan (Hitachi Zosen Corporation; Kawasaki Heavy Industries, Ltd.; Mitsui Engineering and Shipbuilding Co., Ltd.; NKK Corporation; and Sumitomo Heavy Industries, Ltd.). This paper describes a design system for an optimum CRP, which is one of the numerous outcomes of this work. The optimum design system is composed of three theoretical programs: (1) the design program of the optimum CRP; (2) the steady lifting surface program of the CRP; (3) the unsteady lifting surface program of the CRP. These theoretical programs will be discussed in the first part of the paper, and the design system supported by these theoretical programs will then be verified by comparing calculated and experimental results.
Read moreElements of Cycle Design for Parallel Hybrid Mixed Flow Turbofans
In the last decade, parallel and serial hybrid combining gas turbine propulsion with electric power systems have been investigated. For the commercial aviation sector, they provide fuel burn and emission reduction potential and have been explored to some extent. Depending on the chosen concept of operation, propulsion cycle, and reference basis, minimal to mild double digit fuel consumption reductions are anticipated. A key challenge remains the low specific energy of current battery technology, leading to a high penalty on electrical energy use. High-speed civil propulsion has gained interest in recent years due to advances in material capabilities and technology enhancements, especially for what concerns aircraft and sonic boom noise reductions. As a result, there is now a renewed and stronger focus on developing supersonic transport aircraft that are environmentally sustainable, technologically feasible, and economically competitive with the existing civil subsonic aviation market sector. The propulsion system for supersonic civil aircraft must satisfy more stringent requirements and more limiting constraints compared to a subsonic application, due to the more severe operating conditions. In this context, the publicly available literature is more oriented towards aircraft rather than propulsion system design. For high-speed propulsion and supersonic transport, and the corresponding mixed-flow turbofan cycles, very limited research propulsion system-centred is available, both for the conventional design and for hybrid electric integration. For these cycles, both emission reductions, noise requirement compliance, and performance improvement potential are of substantial interest, thus widening the metrics of interest. In this work, a hybrid mixed-flow turbofan configuration is investigated and modelled, and cycle design trade-offs are identified and selected. A non-hybridised baseline configuration targeting low bypass ratios based on performance data obtained from the open literature is considered for comparison. A multipoint synthesis scheme for the gas turbine is combined with a hybrid concept of operations through physics-based cycle modelling and previously published polytropic efficiency corrections. Trade studies are conducted introducing hybrid configuration, analysis on key performance and fuel consumption metrics are presented and recommendations on hybrid potential exploitation are provided.
Read moreLife Cycle Cost as a Propulsion System Design Consideration
This paper deals with applying Life Cycle Cost (LCC) and Design To Cost (DTC) principles to aircraft engine programs. The dynamic driving elements of LCC are identified with an example of direct application to a deterministic computer model. This model was used as the principal tool to project operating and support costs for the XT701 turboshaft engine in conjunction with the U.S. Army Heavy Lift Helicopter Development that featured a specific DTC-related award fee in the contract. The overall methodology of LCC and DTC supported by the math model earned a Superior evaluation with an unprecedented 100 percent award fee for this kind of application. The customer audit, in support of the performance award, supports the conclusion that computer models can be used to enhance the LCC aspects of propulsion system development programs.
Read moreOptimization design and sensitivity analysis of diesel/battery hybrid propulsion system for polar icebreaker
Objectives For the economic and environmental requirements of polar ice-breakers, a hybrid propulsion system composed of diesel generator sets and a rechargeable battery is proposed. Methods First, the resistance model is established on the basis of ice scale, and the energy flow model of the diesel/battery hybrid propulsion system is established using the inverse simulation method. The component parameters of the propulsion system are then optimized on the basis of an elitist nondominated sorting genetic algorithm-II (NSGA-II) with annual fuel and total cost of entire life cycle as the optimization objectives, and the optimal design is obtained via the technique for order of preference by similarity to ideal solution (TOPSIS) method. Finally, the sensitivity analysis of the optimization objectives to seven design parameters is conducted. Results The results show that the optimal design scheme of the diesel/battery hybrid propulsion system can save 1.89% in fuel consumption compared with the traditional diesel-electric propulsion system, and the pure electric navigation time accounts for 31.22% of the whole voyage, but the rechargeable battery reduces the economy of the system. The sensitivity analysis shows that the optimization objectives (annual fuel and total cost of entire life cycle) of the hybrid propulsion system are sensitive to main engine capacity, number of battery packs and battery state of charge, while less sensitive to reducer ratio, motor capacity and propeller size. Conclusions The results of this study can provide references for the research and design of polar icebreakers and other diesel/battery hybrid electric ships.
Read moreChallenges hindering the ballast water management compliance in Nigeria
The problem of invasive species transfer through ship’s ballast water has resulted in the mandatory International Maritime Organisation (IMO D-2 standards for existing vessel to installation ballast water treatment system (BWTS) onboard for compliance with the schedule deadline of 8 September 2024. However, many ship owners are still not able to comply with the regulation due to the presence of several challenges. Hence, this study evaluates the challenges hindering the Ballast Water Management System (BWMS) compliance of shipping operators in Nigeria from installation of BWTSs. Based on the expert interview and industry review, technical challenges (TCs), environmental challenges (ENCs), economic challenges (ECCs), and other challenges (OCs) were identified as the major challenges responsible for the non-compliance among the Nigerian shipping companies. The Analytical Hierarchy Process was used for evaluating and ranking the various challenges, and the results obtained indicate that OCs, which include external and internal influences on ship operators, ship type, age, and trading route, obtained the highest rank (0.3666), followed by ECCs (0.3648) and TCs obtaining the third rank (0.1456). ENCs were regarded as the least concern (0.1223) for shipping operators in the region in their decision to comply with the BWMS by installing BWTS onboard their ship. This study will help decision-makers in prioritizing the management measure and taking policy decision that can promote the compliance among shipping companies in the region.
Read more