Push yoUr Password: Secure and Fast WiFi Connection for IoT Devices

With the growth of wireless network technology-based devices, identifying the communication behaviour of wireless connectivity enabled devices, e.g. Internet of Things (IoT) devices, is one of the vital aspects, in managing and securing IoT networks. Initially, devices use frames to connect to the access point on the local area network and then, use packets of typical communication protocols through the access point to communicate over the Internet. Toward this goal, network packet and IEEE 802.11 media access control (MAC) frame analysis may assist in managing IoT networks efficiently, and allow investigation of inclusive behaviour of IoT devices. This paper presents network traffic traces data of D-Link IoT devices from packet and frame levels. Data collection experiment has been conducted in the Network Systems and Signal Processing (NSSP) laboratory at Universiti Brunei Darussalam (UBD). All the required devices, such as IoT devices, workstation, smartphone, laptop, USB Ethernet adapter, and USB WiFi adapter, have been configured accordingly, to capture and store network traffic traces of the 14 IoT devices in the laboratory. These IoT devices were from the same manufacture (D-Link) with different types, such as camera, home-hub, door-window sensor, and smart-plug.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

Seeing is not always believing: Insights on IoT manufacturing from firmware composition analysis and vendor survey

With the advancement in science and technology, the demand for electronic Internet of Things (IoT) devices has increased to store and process digital data. With the advancement in IoT technology, we are more reliant on IoT devices to perform our regular tasks. IoT Forensics deals with the investigation of IoT devices such as smartphones, tablets, smart watches, or any device which is connected to the Internet. The data on these devices can still be retrieved via IoT forensics even if they are destroyed, resold, or misplaced. Before discarding any IoT device, we must consider how to secure the data stored on them. We are then going to discuss the several types of personal data that could be retrieved from discarded IoT devices. Finally, we are going to discuss the protection measures for the safe disposal of IoT devices.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

The number of Internet of Things (IoT) devices has increased recently and will increase further in the future. IoT devices are vulnerable, so vendors update and distribute firmware. At the time of firmware distribution, a huge number of IoT devices may connect to the firmware server and excessive network traffic may occur. Consequently, a method using a peer-to-peer file sharing system and a blockchain has been proposed. One study proposed an update scheme considering incentives for distributors to help with updating. However, this method requires the IoT devices, which have limited processing power, to decrypt encrypted files, and the distribution nodes to pay the transaction cost. This paper proposes a firmware distribution method that provides incentives for distributors to help with distribution to reduce the gas costs, using a smart contract and access control based on update records. The additional computations performed by IoT devices and distributors key management were reduced compared to those in previous studies by using access control instead of encryption. Further, the proposed approach was implemented and evaluated using a Raspberry Pi and laptop. The evaluation demonstrated that the gas cost per update was successfully lowered compared to the costs in previous studies.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

With the advancement of 5G mobile telecommunication, various IoT (Internet of Things) devices communicate massive amounts of data by being connected to wireless networks. Since this wireless communication is vulnerable to hackers via data leakage during communication, the transmitted data should be encrypted through block ciphers to protect the data during communication. In addition, in order to encrypt the massive amounts of data securely, it is essential to apply one of secure mode of operation. Among them, CTR (CounTeR) mode is the most widely used in industrial applications. However, these IoT devices have limited resources of computing and memory compared to typical computers, so that it is challenging to process cryptographic algorithms that have computation-intensive tasks in IoT devices at high speed. Thus, it is required that cryptographic algorithms are optimized in IoT devices. In other words, optimizing cryptographic operations on these IoT devices is not only basic but also an essential effort in order to build secure IoT-based service systems. For efficient encryption on IoT devices, even though several ARX (Add-Rotate-XOR)-based ciphers have been proposed, it still necessary to improve the performance of encryption for smooth and secure IoT services. In this article, we propose the first parallel implementations of CTR mode of ARX-based ciphers: LEA (Lightweight Encryption Algorithm), HIGHT (high security and light weight), and revised CHAM on the ARMv8 platform, a popular microcontroller in various IoT applications. For the parallel implementation, we propose an efficient data parallelism technique and register scheduling, which maximizes the usage of vector registers. Through proposed techniques, we process the maximum amount of encryption simultaneously by utilizing all vector registers. Namely, in the case of HIGHT and revised CHAM-64/128 (resp. LEA, revised CHAM-128/128, and CHAM-128/256), we can execute 48 (resp. 24) encryptions simultaneously. In addition, we optimize the process of CTR mode by pre-computing and using the intermediate value of some initial rounds by utilizing the property that the nonce part of CTR mode input is fixed during encryptions. Through the pre-computation table, CTR mode is optimized up until round 4 in LEA, round 5 in HIGHT, and round 7 in revised CHAM. With the proposed parallel processing technique, our software provides 3.09%, 5.26%, and 9.52% of improved performance in LEA, HIGHT, and revised CHAM-64/128, respectively, compared to the existing parallel works in ARM-based MCU. Furthermore, with the proposed CTR mode optimization technique, our software provides the most improved performance with 8.76%, 8.62%, and 15.87% in LEA-CTR, HIGHT-CTR, and revised CHAM-CTR, respectively. This work is the fastest implementation of CTR mode on ARMv8 architecture to the best of our knowledge.

Internet of Things (IoT) is an emerging technology that consists of tiny sensors embedded with IoT devices used in e-Health, smart cities and assisted living. IoT devices are equipped with constrained power, memory, and computing capabilities, which creates new security challenges. By integrating sensors and wireless technologies, this cutting-edge technology automates numerous routine tasks in different domains. The main goal of advancing IoT in the existing healthcare system is to automate the monitoring of hospitals and patients’ health by spreading goodwill toward the IoT vision. IoT has gained popularity on practically all platforms that are available. This paper presents a remote patient health monitoring and diagnosis system that uses Message Queuing Telemetry Transport protocol (MQTT) and Internet of Things (IoT) devices with one time pad cryptography. The proposed plan offers end-to-end data secrecy for an IoT system using MQTT that enables e-health and mobility. Patients’ movements inside nursing homes and healthcare facilities are also managed safely without the need for periodic reconfigurations. Prior to communicating through the MQTT protocol, this secure crypto scheme encrypts the message on both the publisher and subscriber ends. According to the results, the proposed scheme is more efficient than delegation-based architecture in terms of security and lightweight communication. The proposed system established communication between patients and medical experts using IoT technologies to alleviate the hospital strain caused by congestion in medical treatment and enable an expressway of medical responses. According to our results the proposed scheme has low computational overhead compared to other solutions that use conventional encryption to guarantee robust protection against most of the IoT security attacks.

The proliferation of Internet of Things (IoT) devices in personal and household environments has led to a significant increase in security vulnerabilities. These devices, due to their limited computational resources, often struggle to support conventional security solutions, making them prime targets for cyberattacks. This paper explores the potential of lightweight machine learning (ML) models to enhance the security of personal IoT devices. By leveraging the power of AI, lightweight models can offer real-time threat detection and anomaly identification without compromising the device's performance or requiring extensive computational resources. The paper investigates various ML techniques that are well-suited for IoT environments, such as decision trees, k-nearest neighbours (KNN), and support vector machines (SVM), focusing on their ability to detect intrusions, unauthorized access, and other malicious activities while maintaining efficiency. Additionally, the study highlights the trade-offs between model complexity, accuracy, and resource consumption, offering practical insights for deploying ML solutions in resource-constrained IoT systems. Key challenges, including data privacy, model generalization, and the adaptability of models to diverse IoT ecosystems, are addressed. Finally, the paper discusses future directions for the integration of more advanced lightweight models, such as federated learning and edge computing, which could further enhance security capabilities while ensuring minimal impact on IoT device performance. Through this review, the paper advocates for the adoption of lightweight ML models as a feasible and scalable solution to securing personal IoT devices in an increasingly connected world.

The deployment of a client–server-based distributed intelligent system involves application development in both the network domain and the device domain. In the network domain, an application server (typically in the cloud) is deployed to execute the network applications. In the device domain, several Internet of Things (IoT) devices may be configured as, for example, wireless sensor networks (WSNs), and interact with each other through the application server. Developing the network and the device applications are tedious tasks that are the major costs for building a distributed intelligent system. To resolve this issue, a low-code or no-code (LCNC) approach has been purposed to automate code generation. As traditional LCNC solutions are highly generic, they tend to generate excess code and instructions, which will lack efficiency in terms of storage and processing. Fortunately, optimization of automated code generation can be achieved for IoT by taking advantage of the IoT characteristics. An IoT-based distributed intelligent system consists of the device domain (IoT devices) and the network domain (IoT server). The software of an IoT device in the device domain consists of the Device Application (DA) and the Sensor Application (SA). Most IoT LCNC approaches provide code generation in the network domain. Very few approaches automatically generate the DA code. To our knowledge, no approach supports the SA code generation. In this paper, we propose DeviceTalk, an LCNC environment for the DA and the SA code development. DeviceTalk automatically generates the code for IoT devices to speed up the software development in the device domain for a distributed intelligent system. We propose the DeviceTalk architecture, design and implementation of the code generation mechanism for the IoT devices. Then, we show how a developer can use the DeviceTalk Graphical User Interface (GUI) to exercise LCNC development of the device software.

This dissertation proposes a solution to the growing concern about the security of Internet of Things (IoT) devices in home or business environments. Entitled MAIOS (Multi Accountability IoT Oriented Switch), the system offers an SDN (Software Defined Networking) switch architecture, which provides effective segmentation for IoT devices, increasing their protection against cyber threats. The research begins by contextualizing the exponential increase in IoT devices and the security challenges associated with them. MAIOS addresses this issue through a centralized control layer, which allows efficient management of IoT devices and the implementation of dynamic security policies, which can be applied from an SDN control plane application layer. The system was designed considering functional, non-functional requirements and deployment scenarios, either in home or business environments. To increase usability, an intuitive interface was developed for users, facilitating the configuration and monitoring of IoT devices. The solution is based on open source technologies such as pfSense proxy/firewall and Home Assistant to provide functionalities such as firewall, IoT control and real-time traffic monitoring. The effectiveness of MAIOS is evaluated through security and performance tests in simulated environments, which demonstrated its ability to identify and mitigate cyber threats, providing robust security for IoT devices. This dissertation offers a contribution to the field of IoT security, presenting a practical, affordable and effective solution to protect devices in residential and business networks. MAIOS represents an important advance in ensuring digital security in an increasingly connected world.

To facilitate uploading of sensing data with a tremendous and still growing number of devices in Internet of Things (IoT), is one of the most pressing tasks today. It is not sensible to equip each IoT device with cellular or other wide range access technologies, thus the network access management and sensing data fusion are necessary to solve the paradox of spectrum drain and endless user experience. In this framework, we considered a practical scenario where exist heterogeneous IoT devices with energy harvesting and limited short range access technologies, e.g. WiFi, BLE4.0, and their data can be uploaded through an access point (AP) in given area. The AP needs to schedule the data uploading of heterogeneous IoT devices, and conservatively satisfy the quality of experience (QoE) requirements, e.g. delay, sensing interval, data rate. First, we modeled the energy harvesting and sensing data of IoT devices by Markov chain and probability transfer matrix, and derived the expression of urgency function which can clearly distinguish the urgency of data transmission among devices. Secondly, an auction-based IoT devices data uploading mechanism is proposed, which satisfies the expected economic robustness with low communication overhead. Finally, we performed extensive simulations to verify the proposed data uploading scheme and algorithm. The simulation results indicate that the proposed scheme works well.

Assuring the required quality of service, despite the growing volume and variety of Internet of Things (IoT) traffic, has remained an immense challenge in the popular WiFi networks. The IoT devices using short TCP flows often attain very different levels of service due to the complicated interactions between the transport layer protocol and the shared dynamic wireless medium. We develop in this paper a novel queue management policy by using a transient model to capture the interactions of IoT (short TCP) flows over traditional traffic in WiFi networks. Based on the Markov regenerative processes coupled with fluid model, we discover that the adaptive admission control (AAC) mechanism at the WiFi access point (AP) improves the response time and fairness of IoT traffic over the lossy WiFi links. To this end, under the proposed AAC, packets are admitted into the AP in such a way that the fractions of packets in the AP buffer belonging to the different IoT devices are balanced resulting in a comparable level of service. We furthermore prove the stability of the system dynamics under AAC which provides important practical insights in designing home WiFi IoT system.