PYROMET ALLOY CTX-1

UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

Sumitomo HR11N is a high temperature nickel alloy with a high chromium content to provide excellent corrosion and oxidation resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Ni-718. Producer or source: Sumitomo Metal USA Corporation.

PYROMET 901 is a nickel-chromium super alloy designed for high strength and corrosion resistance in the temperature range of 1000-1400 F. Compounds of Ni3 (Al, Ti) type produce the precipitation hardening. It is used in a variety of high-temperature applications such as components in aircraft and gas turbines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-216. Producer or source: Carpenter Technology Corporation.

Crucible CG27 is a forgeable iron-nickel base alloy having an excellent combination of high temperature stress-rupture and tensile properties. It resists oxidation up to 1500 F and is recommended for gas turbine engines and turbine wheels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-219. Producer or source: Crucible Materials Corporation.

CARPENTER L-605 alloy is a nonmagnetic cobalt-base alloy that has good oxidation and corrosion resistance and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-81. Producer or source: Carpenter.

Kubota UCX was developed for very high temperature operation for ethylene pyrolysis service. The alloy also has excellent oxidation and corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting and joining. Filing Code: Ni-663. Producer or source: Kubota Metal Corporation, Fahramet Division.

Superimphy 625 is highly alloyed with chromium, molybdenum, and niobium for both corrosion resistance and high-temperature strength. Applications include environments ranging from seawater to phosphoric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-646. Producer or source: Metalimphy Precision Alloys.

HASTELLOY ALLOY G-30 is a nickel-base alloy with a superior corrosion resistance to commercial phosphoric acid and complex environments containing highly oxidizing acids. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-322. Producer or source: Cabot Corporation, Corrosion Resistant Alloys.

CARPENTER STAINLESS TYPE 304HN is essentially a high-nitrogen version of AISI Type 304 stainless steel. By means of solid-solution strengthening, the nitrogen provides significantly higher yield strength and tensile strength as annealed than conventional Type 304, without adversely affecting ductility, corrosion resistance or nonmagnetic properties. Its applications include aircraft and aerospace components and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-368. Producer or source: Carpenter. See also Alloy Digest SS-763, September 1999.

Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.

FIRTH-VICKERS 448 is a ferritic type stainless steel having high oxidation resistance and strength at elevated temperatures. It has good creep resistance in the range 1020 to 1200 deg. F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep, deformation, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-51. Producer or source: Firth-Vickers Stainless Steels Ltd.

REMANIT 4565S is a fully austenitic stainless steel which features both high strength and excellent corrosion resistance in a wide range of corrosive media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-529. Producer or source: Thyssen Specialty Steels Inc..

NIMONIC 110 is a highly alloyed nickel-base alloy having high creep and oxidation resistance. It is recommended for aircraft gas turbine components to resist the stresses at the very high temperatures of operation. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-128. Producer or source: Henry Wiggin & Company Ltd.