Qualnet performances of grid-based clustering For WSN's routing protocols

The sensor nodes are independent and work as sender, receiver and intermediate node in Wireless Sensor Network (WSN). The sensor nodes are forming the small network in which the one or more sender is sending data to one destination/s through intermediate nodes or sending information to Base Station (BS). The information collect by base station is further analyzed. The nodes are also static or mobile depends on the situation or conditions. The connection establishment and data sending is possible through routing protocols of WSN. The routing protocols of WSN are not same as traditional wireless routing protocols. One major issue on this network is security. The routing protocols are sending information to destination from particular source and the routing strategy is provides the better way of delivery in the network. The sensor nodes in network are performing through limited battery supply called node energy or power. The attacker are also affected the limited energy resource. In this paper the center of consideration is on the security issues related to WSN routing protocols. The routing in WSN remains a key issue because of that without accurately functioning of routing protocols, the network cleanly will not work the technique it's intended to. Unfortunately, routing also one of the most difficult to protect against attacks malicious activities because of the administration in WSN. The better protection scheme is provides the complete security from attacks and the secure routing is provides the better and trustful network performance.

Wireless Sensor Networks (WSNs) have led to tremendous growth in the development of sensor technology and offer numerous applications, such as wildlife monitoring, environment, healthcare, military surveillance and security systems. In terms of performance, the evolutions of WSN routing protocols play a vital role in extending the lifetime of networking operations. Due to the limited resources of power in sensor nodes, the design and implementation of an energy-efficient routing protocol comprise a key challenge for researchers. Before, in the case of a static sink, nodes at farther areas from the sink transmit their sensed data at a longer transmission range and die early, while nearby nodes face lesser transmission costs and stay alive for a longer period. This unbalanced energy distribution creates energy holes in ares far from the sink in WSNs. Mobility-based sink routing protocols are proposed to minimize the sub-optimal energy consumption in WSNs, as the sink mobility covers the sensor field, which alleviates the overall load-balancing among sensor nodes. In order to overcome the energy hole issue while prolonging the network lifetime, it is important to determine the optimal mobility pattern. In this regard, we propose the Spiral Mobility based on Optimized Clustering (SMOC) routing protocol and the Multiple sink-based SMOC (M-SMOC) routing protocol for large-scale WSNs. Performance evaluations of the proposed protocols are compared with various existing routing protocols based on static sink, random mobility and grid mobility. Different numbers of performance parameters are considered for evaluation, such as network lifetime, network stability, packet drop ratio, packet delivery ratio, end-to-end delay, average energy consumption, network connection time and the impact of different heterogeneity levels. Experimental results show the benefits of the spiral mobility pattern and how it improves the network lifetime and stability period over the existing state-of-the-art routing protocols.

Wireless sensor networks (WSNs) are formed using a cluster of sensor nodes (SNs), deployed randomly to perform sensing operations in an area under observation. Due to the unavailability of an external power source, the energy efficiency considered as one of the critical issues in WSNs. Selection of a sensor node (SN) from a wireless sensor network (WSN) cluster to serve as an aggregator or cluster head (CH), considered as an efficient method to increase the lifetime of wireless sensor network (WSN). In this paper, we have proposed an energy efficient CH selection scheme for WSN, to enhance the lifetime and average residual energy of a single WSN cluster. The proposed strategy nominates a group SNs as CHs, based on their channel condition with the base station (BS) and their residual energy. The proposed algorithm is helpful in solving the problem of unbalanced energy consumption in WSNs. Furthermore, the mechanism of using mobile sink during the hand-off stage helps to overcome the delay in data transmission. Moreover, the incorporation of energy harvesting significantly increases the lifetime of WSN. In comparison to a state-of-art technique available in the literature, our scheme shows a 33% increase in lifetime and presents a steady decrease in residual energy for the same rounds of data transmission.

Wireless Sensor Networks (WSNs) is the vast area and developing very speedily now-a-days. This paper gives some of the major applications and critical limitations of WSNs like power and lifespan, communication bandwidth, memory size. Sensor nodes are working by node energy so the energy consumption is the essential issue in WSN. Routing in WSN consumes more energy than any other phase. Various routing techniques in WSNs are discussed and different routing protocols are illustrated. Low Energy Adaptive Clustering Hierarchy (LEACH) is one of the popular and feasible hierarchical clustering routing protocols in WSN. Working of LEACH is explained in brief. Furthermore, the descendants of LEACH e.g. LEACH-C (Centralized LEACH), LEACH-B (Balanced LEACH), LEACH-F, Multihop LEACH, MS-LEACH (Multihop and Single hop LEACH), MH-LEACH etc. are discussed in terms of the energy utilization. By analyzing the variants of LEACH, it is observed that the energy requirement in the cluster set up phase or data transmission phase is minimized to minimize the total energy consumption of the WSN. To elect the proper cluster head node, centralized approach is followed. Afterwards, data transmission will use the multihop communication technique. This will help to save some energy when base station is located far away from the cluster head node. Proposed protocol aims to decrease the energy overhead of the sensor nodes. The new approach is proposed entitled PV-LEACH which will save the energy consumption in cluster setup phase and also in data transmission phase of the conventional LEACH protocol. So, this will enhance the performance ratio in terms of energy consumption and life time of the sensor nodes.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Wireless sensor network routing protocols are basically used to provide the function of data routing towards the sink and are vulnerable to various attacks. LEACH is a one of the routing protocol used for clustered implementation of wireless sensor network with Received Signal Strength based dynamic selection of Cluster Heads. But, as with other routing protocols, the LEACH is also exposed to attacks when the malicious sensor node becomes the Cluster Head by launching Sybil attack. Cluster heads are vulnerable to various malicious attacks and this greatly affects the performance of the wireless sensor network. Cryptographic and non-cryptographic approaches to detect the presence of attack also exist but they lack efficiency in some way. Cryptographic approaches to prevent this attack are not so helpful though some non-cryptographic methods to detect the attack also exist but they are not too efficient as they result in large test packet overhead. In this paper, we propose SRSRP (Sybil Resistant Secure Routing Protocol) extension to LEACH protocol so as to protect the cluster head against Sybil attack. SRSRP is base on encryption using Armstrong number and decryption using AES algorithm to verify the identity of cluster head. The proposed technique is implemented in NS2, the experimental results clearly indicate the proposed technique has significant capability for the detection of Sybil attack launched for making the malicious node as the cluster head.

Wireless Sensor Network (WSN) is an independent device that comprises a discrete collection of Sensor Nodes (SN) to sense environmental positions, device monitoring, and collection of information. Due to limited energy resources available at SN, the primary issue is to present an energy-efficient framework and conserve the energy while constructing a route path along with each sensor node. However, many energy-efficient techniques focused drastically on energy harvesting and reduced energy consumption but failed to support energy-efficient routing with minimal energy consumption in WSN. This paper presents an energy-efficient routing system called Energy-aware Proportional Fairness Multi-user Routing (EPFMR) framework in WSN. EPFMR is deployed in the WSN environment using the instance time. The request time sent for the route discovery is the foremost step designed in the EPFMR framework to reduce the energy consumption rate. The proportional fairness routing in WSN selects the best route path for the packet flow based on the relationship between the periods of requests between different SN. Route path discovered for packet flow also measure energy on multi-user route path using the Greedy Instance Fair Method (GIFM). The GIFM in EPFMR develops node dependent energy-efficient localized route path, improving the throughput. The energy-aware framework maximizes the throughput rate and performs experimental evaluation on factors such as energy consumption rate during routing, Throughput, RST, node density and average energy per packet in WSN. The Route Searching Time (RST) is reduced using the Boltzmann Distribution (BD), and as a result, the energy is minimized on multi-user WSN. Finally, GIFM applies an instance time difference-based route searching on WSN to attain an optimal energy minimization system. Experimental analysis shows that the EPFMR framework can reduce the RST by 23.47% and improve the throughput by 6.79% compared with the state-of-the-art works.

Wireless sensor network (WSN) consists of thousands of sensor nodes with low power, low memory, and low computational capabilities. Therefore, energy issues have to be taken into considerations while designing WSN applications and protocols. Routing protocols such as LEACH and LEACH-C have been proposed for energy conservation in WSN. However, these typical protocols have drawback of unequal energy depletion in cluster heads (CHs) due to the different transmission distance from each CH to the base station (BS). In order to minimize the energy consumption caused by large distance of CHs from the BS, we propose dynamic clustering and distance aware routing protocol (DDAR) for WSN which takes into account of node distance for selecting CH, dynamic approach of selecting the CH nodes, and two level hierarchy of clustering with super cluster head (SCH) node near to the BS. Simulation results show that the proposed DDAR protocol consumes about 15.5% less energy than conventional LEACH protocol.

Now days, wireless technology is one of the center of attention for users and researchers. Wireless network is a network having large number of sensor nodes and hence called as “Wireless Sensor Network (WSN)”. WSN monitors and senses the environment of targeted area. The sensor nodes in WSN transmit data to the base station depending on the application. These sensor nodes communicate with each other and routing is selected on the basis of routing protocols which are application specific. Based on network structure, routing protocols in WSN can be divided into two categories: flat routing, hierarchical or cluster based routing, location based routing. Out of these, hierarchical or cluster based routing is becoming an active branch of routing technology in WSN. To allow base station to receive unaltered or original data, routing protocol should be energy-efficient and secure. To fulfill this, Hierarchical or Cluster base routing protocol for WSN is the most energy-efficient among other routing protocols. Hence, in this paper, we present a survey on different hierarchical clustered routing techniques for WSN. We also present the key management schemes to provide security in WSN. Further we study and compare secure hierarchical routing protocols based on various criteria.

Due to open network nature of wireless sensor networks make them highly vulnerable to a variety of security attacks and easy target for adversaries, which may capture these nodes, analyze and easily insert fake route information. Wireless sensor network is an emerging, cost effective and unsupervised solution for collecting this information from the physical world and sending this information back to centralized authority for further processing. GRPW (Geographic Routing in connected wireless sensor networks based on Multiple Sinks) is one of the basic routing protocols used for Supporting Mobile Sinks in Wireless Sensor Networks. GRPW, a geographical routing protocol for wireless sensor networks, is based on an architecture partitioned by logical levels, on the other hand based on a multipoint relaying flooding technique to reduce the number of topology broadcast. GRPW-MuS uses periodic HELLO packets to neighbor detection. The wormhole attack can form a serious threat in wireless sensor networks, especially against many wireless sensor networks routing protocols and location-based wireless security systems. Here, a trust model to handle this attack in GRPW is provided called GRPW-MuS-s. Using OMNET++ simulation and the MiXiM framework, results show that GRPW-MuS-s protocol only has very small false positives for wormhole detection during the neighbor discovery process (less than GRPW). The average energy usage at each node for GRPW-MuS-s protocol during the neighbor discovery and route discovery is very low than GRPW-MuS, which is much lower than the available energy at each node. The cost analysis shows that GRPW-MuS-s protocol only needs small memory usage at each node, which is suitable for the sensor network.

Two-tier particle swarm optimization protocol for clustering and routing in wireless sensor network

The lifetime of Wireless Sensor Network (WSN) is based on the energy of each sensor. Therefore, numerous routing protocols have been introduced such as SEP (Stable Election Protocol), LEACH (Low energy adaptive clustering hierarchy) and EAMMH (Energy Aware Multi-hop Multi-path Hierarchical routing protocol) to stable the lifetime of WSN by efficient utilization of energy of the sensors. In WSN networks data is collected and forwarded wirelessly to the base stations. Routing protocols in WSN provide an efficient path for multi-hop communication because the transmission range and battery power storage of nodes is limited. As nodes are usually deployed in remote areas so, they face challenges of long lifetime, network architecture, security issues, and network coverage. Many routing protocols have been developed to increase the efficiency of networks. Out of these clustering algorithms are the best choice to increase the lifetime of the nodes. Each protocol has its limitations in different scenarios. In this paper, we discussed and compared the performance of LEACH, EAMMH and SEP. SEP is an efficient algorithm due to its weighted cluster head (CH) selection method. Simulation results are obtained using MATLAB. Design metrics of energy consumption and network lifetime are under consideration in this research work.

HEER – A delay-aware and energy-efficient routing protocol for wireless sensor networks

Many routing protocols have been designed and evaluated for Wireless Sensor Networks using simulation tools. Only a few of these proposed works have been tested in real world scenarios. This paper presents a Wireless Sensor Network (WSN) data aggregation & routing protocol that is particularly suited to largely deployed sensor networks. The proposed mechanism combines a gradient based routing scheme with the hierarchical scheme of the LEACH protocol. By combining these two protocols and taking the important factor of node energy into consideration when selecting the cluster heads, a robust strategy for data aggregation and routing is developed. Simulation results show that the proposed protocol improves the wireless sensor network performance in two ways. First, the data aggregation feature reduces 75% data load on the network and second, energy aware clustering and cost aware multi-hop communication increases the lifetime of network as compared to LEACH and EEPSC routing protocols

The tiny and self-organizing nodes are included in Wireless Sensor Networks (WSNs) that can collect and transmit data over wireless medium. For wireless sensor network, the important factors are considered such as effective utilization of energy and energy saving. The relationship of cluster head (CHs) and sensor nodes has been taken into the account for most prior cluster based routing protocols while ignoring the huge difference costs between them. Without being a presence of as a member of any of the clusters, the nodes are left out in some existing clustering protocol and that nodes are called as residual nodes. Due to these residual nodes in WSN, the lifetime may reduce in the network. A new framework is presented by using an effective clustering mechanism with Intra Mobile Agents (IN-MA). Based on the structure of a network, an algorithm of a PSO-GA based location estimation to determine the best position for the sink. The data from members by the Intra Mobile Agents and deliver that data to the CHs. A PSO-GA algorithm is computed an optimal position for the sink. Security of the wireless sensor networks is major concern today.