Quantum computation for predicting electron and phonon properties of solids

Abstract: This chapter explores the transformative potential of quantum algorithms in solving complex optimization problems across industries such as logistics, finance, and material science. Quantum algorithms, including Quantum Annealing, Quantum Approximate Optimization Algorithm (QAOA), and Variational Quantum Eigensolver (VQE), offer unprecedented computational capabilities for addressing challenges that are impractical for classical algorithms. In logistics, quantum algorithms optimize supply chains, vehicle routing, and warehouse operations, significantly reducing costs and improving efficiency. In finance, quantum optimization enables better portfolio management, risk assessment, and high-frequency trading strategies, providing faster, more accurate solutions. In material science, quantum algorithms accelerate the discovery and design of new materials, such as superconductors and catalysts, by simulating molecular interactions more efficiently. The chapter discusses real-world implementations, current technical challenges, and the future potential of quantum algorithms to revolutionize industries through faster and more scalable optimization solutions. Keywords: Quantum algorithms, Quantum Annealing, QAOA, VQE, optimization, logistics, finance, material science, portfolio optimization, risk management, supply chain, molecular simulation, quantum computing, quantum optimization, quantum chemistry, high-frequency trading.

The variational quantum eigensolver (VQE) stands as a prominent quantum-classical hybrid algorithm for near-term quantum computers to obtain the ground states of molecular Hamiltonians in quantum chemistry. However, due to the noncommutativity of the Pauli operators in the Hamiltonian, the number of measurements required on quantum computers increases significantly as the system size grows, which may hinder practical applications of VQE. In this work, we present a protocol termed (JBM-VQE) to reduce the number of measurements and speed up the VQE algorithm. Our method employs joint Bell measurements, enabling the simultaneous measurement of the absolute values of all expectation values of Pauli operators present in the Hamiltonian. In the course of the optimization, JBM-VQE estimates the absolute values of the expectation values of the Pauli operators for each iteration by the joint Bell measurement, while the signs of them are measured less frequently by the conventional method to measure the expectation values. Our approach is based on the empirical observation that the signs do not often change during optimization. We illustrate the speed-up of JBM-VQE compared to conventional VQE by numerical simulations for finding the ground states of molecular Hamiltonians of small molecules, and the speed-up of JBM-VQE at the early stage of the optimization becomes increasingly pronounced in larger systems. Our approach based on the joint Bell measurement is not limited to VQE and can be utilized in various quantum algorithms whose cost functions are expectation values of many Pauli operators. Published by the American Physical Society 2024

Quantum computers offer significant potential for complex system analysis, yet their application in large systems is hindered by limitations such as qubit availability and quantum hardware noise. While the variational quantum eigensolver (VQE) was proposed to address these issues, its scalability remains limited. Many efforts, including new ansätze and Hamiltonian modifications, have been made to overcome these challenges. In this work, we introduced the novel Fragment Molecular Orbital/Variational Quantum Eigensolver (FMO/VQE) algorithm. This method combines the fragment molecular orbital (FMO) approach with VQE and efficiently utilizes qubits for quantum chemistry simulations. Employing the UCCSD ansatz, the FMO/VQE achieved an absolute error of just 0.053 mHa with 8 qubits in a H24\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{\ ext{H}}}_{24}$$\\end{document} system using the STO-3G basis set, and an error of 1.376 mHa with 16 qubits in a H20\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{\ ext{H}}}_{20}$$\\end{document} system with the 6-31G basis set. These results indicated a significant advancement in scalability over conventional VQE, maintaining accuracy with fewer qubits. Therefore, our FMO/VQE method exemplifies how integrating fragment-based quantum chemistry with quantum algorithms can enhance scalability, facilitating more complex molecular simulations and aligning with quantum computing advancements.

We explore the use of symmetry-adapted perturbation theory (SAPT) as a simple and efficient means to compute interaction energies between large molecular systems with a hybrid method combining NISQ-era quantum and classical computers. From the one- and two-particle reduced density matrices of the monomer wavefunctions obtained by the variational quantum eigensolver (VQE), we compute SAPT contributions to the interaction energy [SAPT(VQE)]. At first order, this energy yields the electrostatic and exchange contributions for non-covalently bound systems. We empirically find from ideal statevector simulations that the SAPT(VQE) interaction energy components display orders of magnitude lower absolute errors than the corresponding VQE total energies. Therefore, even with coarsely optimized low-depth VQE wavefunctions, we still obtain sub kcal mol−1 accuracy in the SAPT interaction energies. In SAPT(VQE), the quantum requirements, such as qubit count and circuit depth, are lowered by performing computations on the separate molecular systems. Furthermore, active spaces allow for large systems containing thousands of orbitals to be reduced to a small enough orbital set to perform the quantum portions of the computations. We benchmark SAPT(VQE) (with the VQE component simulated by ideal statevector simulators) against a handful of small multi-reference dimer systems and the iron center containing human cancer-relevant protein lysine-specific demethylase 5 (KDM5A).

Materials simulations involving strongly correlated electrons pose fundamental challenges to state‐of‐the‐art electronic structure methods but are hypothesized to be the ideal use case for quantum computing algorithms. To date, no quantum computer has simulated a molecule of a size and complexity relevant to real‐world applications, despite the fact that the variational quantum eigensolver (VQE) algorithm can predict chemically accurate total energies. Nevertheless, because of the many applications of moderately sized, strongly correlated systems, such as molecular catalysts, the successful use of the VQE stands as an important waypoint in the advancement toward useful chemical modeling on near‐term quantum processors. In this paper, we take a significant step in this direction. We lay out the steps, write, and run parallel code for an (emulated) quantum computer to compute the bond dissociation curves of the TiH, LiH, NaH, and KH diatomic hydride molecules using the VQE. TiH was chosen as a relatively simple chemical system that incorporates d orbitals and strong electron correlation. Because current VQE implementations on existing quantum hardware are limited by qubit error rates, the number of qubits available, and the allowable gate depth, recent studies using it have focused on chemical systems involving s and p block elements. Through VQE + UCCSD calculations of TiH, we evaluate the near‐term feasibility of modeling a molecule with d‐orbitals on real quantum hardware. We demonstrate that the inclusion of d‐orbitals and the use of the UCCSD ansatz, which are both necessary to capture the correct TiH physics, dramatically increase the cost of this problem. We estimate the approximate error rates necessary to model TiH on current quantum computing hardware using VQE + UCCSD and show them to likely be prohibitive until significant improvements in hardware and error correction algorithms are available.

Quantum computing is attracting more and more attention in material and biological science. In the noisy intermediate-scale quantum (NISQ) computing era, the variational quantum eigensolver (VQE) is expected as an effective method to solve quantum chemistry problems which has potential quantum advantage. Classically simulating quantum algorithms plays a critical role in algorithmic development and the validation of noisy quantum devices before large-scale, fully fault-tolerant quantum computers are developed. However, most existing simulators are based on the state vector or density matrix representation of the quantum state which is faced with the memory bottleneck due to the exponential growth of memory requirement as the number of qubits increases. In this work, we present a VQE simulator based on the matrix product states (MPS) method from quantum many-body physics, and a detailed study of our MPS-VQE simulator in quantum chemistry applications. The memory requirement of MPS-VQE grows only polynomially and we demonstrate that accurate results can be obtained despite the truncation of the smallest singular values during the algorithm. A distributed parallelization scheme is also presented for massively parallel computer systems, and different implementations of the parallelization scheme based on the Julia language are benchmarked which demonstrate the efficiency and scalability of our method. Our method could open a new avenue towards large-scale classical simulation of quantum computational chemistry.

Quantum Computing and Artificial Intelligence (AI) are two transformative paradigms whose convergence holds immense potential to reshape computational science. This chapter explores the foundational principles of quantum computation and machine learning, emphasizing their interplay in addressing classically intractable problems. A systematic exposition of key quantum algorithms, such as Shor's factoring algorithm, Grover's algorithm, and the Variational Quantum Eigensolver (VQE), and particular focus is placed on variational quantum algorithms (VQAs), which have emerged as central tools in the NISQ era due to their hybrid quantum-classical nature. The experimental investigation conducted through VQE demonstrates the capability of expectation value minimization for approximating ground-state energies, with fidelity analysis offering insight into the accuracy and stability of the method. The chapter concludes with a discussion of open challenges and outlines future research directions, emphasizing error mitigation, algorithmic innovation, and the co-design of hardware and software.

The variational quantum eigensolver (VQE) is a promising algorithm to demonstrate quantum advantage on near-term noisy-intermediate-scale quantum (NISQ) computers. One central problem of VQE is the effect of noise, especially physical noise, on realistic quantum computers. We systematically study the effect of noise for the VQE algorithm by performing numerical simulations with various local noise models, including amplitude damping, dephasing, and depolarizing noise. We show that the ground state energy will deviate from the exact value as the noise probability increase, and typically, the noise will accumulate as the circuit depth increase. The results suggest that the noisy quantum system can remain entanglement at the noise level of NISQ devices by comparing the VQE solution with the mean-field solution for the many-body ground state problem. We build a noise model to capture the noise in a real quantum computer, and the corresponding numerical simulation is consistent with experimental results on IBM Quantum computers through cloud. Our work sheds new light on the practical research of noisy VQE, and the deep understanding of the noise effect of VQE will also help develop error mitigation techniques on near-term quantum computers.

The variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm for finding the minimum eigenvalue of a Hamiltonian that involves the optimization of a parameterized quantum circuit. Since the resulting optimization problem is in general nonconvex, the method can converge to suboptimal parameter values that do not yield the minimum eigenvalue. In this work, we address this shortcoming by adopting the concept of variational adiabatic quantum computing (VAQC) as a procedure to improve VQE. In VAQC, the ground state of a continuously parameterized Hamiltonian is approximated via a parameterized quantum circuit. We discuss some basic theory of VAQC to motivate the development of a hybrid quantum-classical homotopy continuation method. The proposed method has parallels with a predictor-corrector method for numerical integration of differential equations. While there are theoretical limitations to the procedure, we see in practice that VAQC can successfully find good initial circuit parameters to initialize VQE. We demonstrate this with two examples from quantum chemistry. Through these examples, we provide empirical evidence that VAQC, combined with other techniques (an adaptive termination criteria for the classical optimizer and a variance-based resampling method for the expectation evaluation), can provide more accurate solutions than “plain” VQE, for the same amount of effort.

Abstract: This paper explores hybrid quantum-classical optimization algorithms implemented across multiple quantum software development kits (SDKs): Qiskit and Cirq,. We evaluate the Variational Quantum Eigensolver (VQE) and Quantum Approximate Optimization Algorithm (QAOA) in terms of convergence rate, final cost value, and fidelity, using both simulators and real quantum hardware backends. Our results offer comparative insights into SDK performance and propose a standardized benchmarking approach for future quantum algorithm research. Keywords: Hybrid Quantum Algorithms, Qiskit, Cirq, VQE, QAOA, Quantum SDKs, Quantum Optimization, NISQ

Quantum computing is poised to transform computational paradigms across science and industry. As the field evolves, it can benefit from established classical methodologies, including promising paradigms such as Transfer of Knowledge (ToK). This work serves as a brief, self‐contained reference for ToK, unifying its core principles under a single formal framework. We introduce a joint notation that consolidates and extends prior work in Transfer Learning and Transfer Optimisation, bridging traditionally separate research lines and enabling a common language for knowledge reuse. Building on this foundation, we classify existing ToK strategies and principles into a structured taxonomy that helps researchers position their methods within a broader conceptual map. We then extend key transfer protocols to quantum computing, introducing two novel use cases—reverse annealing and multitasking Quantum Approximate Optimization Algorithm (QAOA)—alongside a sequential Variational Quantum Eigensolver (VQE) approach that supports and validates prior findings. These examples highlight ToK's potential to improve performance and generalisation in quantum algorithms. Finally, we outline challenges and opportunities for integrating ToK into quantum computing, emphasising its role in reducing resource demands and accelerating problem‐solving. This work lays the groundwork for future synergies between classical and quantum computing through a shared, transferable knowledge framework.

The two-site Heisenberg model has an extraordinarily simple analytical solution and is traditionally used as a benchmark against numerical methods, such as exact diagonalization and Monte Carlo methods. In the same spirit, we benchmark three quantum algorithms that are implemented in a quantum computer against the analytical solution of this model. In particular, this presentation includes a description of the standard and iterative quantum phase estimation algorithms, as well as the variational quantum eigensolver. These quantum algorithms are introduced in a pedagogical fashion allowing newcomers to the subject, familiar with only the most basic quantum mechanical systems, to easily reproduce the presented results and apply the methods to other problems, thus building a seemingly under-appreciated path towards useful quantum algorithms through the lens of simulating and computing properties of physical quantum systems.

The possibility of adopting quantum computing in the field of financial services can bring a new breakthrough in portfolio management since the optimization of this method requires large numbers for the solution that exceed the capabilities of classical computing algorithms. This study focuses on using a hybrid quantum-classical computational method known as the Variational Quantum Eigensolver (VQE) in optimizing portfolio selection. The VQE aims at finding the best allocation of the portfolio; the best weights that correspond to minimum risk and maximum return as predicted by the modern portfolio theory. The study assesses the suitability and speed of VQE in solving matters involving portfolio management tasks such as handling vast data and nonlinear constraints which are hard to solve through other optimization methods. Thus, under the theoretical framework of quantum computing, the study seeks to address some of the following challenges: computational time and scalability in portfolio optimization. The VQE algorithm work on different portfolio configurations; their performance in comparison with classical techniques; special attention is paid to the rate of convergence and the achievement of the optimal solution. Based on the results of this work we can conclude that there is a considerable literature on quantum finance and that this field can benefit from utilization of quantum algorithms as a tool to improve decision-making in the financial market. That is why the study proves that quantum optimization techniques, to wit VQE, can provide better solutions when it comes to portfolio management within the sphere of finance.

The Variational Quantum Eigensolver (VQE) is a method of choice to solve the electronic structure problem for molecules on near-term gate-based quantum computers. However, the circuit depth is expected to grow significantly with problem size. Increased depth can both degrade the accuracy of the results and reduce trainability. In this work, we propose a novel approach to reduce ansatz circuit depth. Our approach, called PermVQE, adds an additional optimization loop to VQE that permutes qubits in order to solve for the qubit Hamiltonian that minimizes long-range correlations in the ground state. The choice of permutations is based on mutual information, which is a measure of interaction between electrons in spin-orbitals. Encoding strongly interacting spin-orbitals into proximal qubits on a quantum chip naturally reduces the circuit depth needed to prepare the ground state. For representative molecular systems, LiH, H$_2$, (H$_2$)$_2$, H$_4$, and H$_3^+$, we demonstrate for linear qubit connectivity that placing entangled qubits in close proximity leads to shallower depth circuits required to reach a given eigenvalue-eigenvector accuracy. This approach can be extended to any qubit connectivity and can significantly reduce the depth required to reach a desired accuracy in VQE. Moreover, our approach can be applied to other variational quantum algorithms beyond VQE.

Variational quantum algorithms are suitable for use on noisy quantum systems. One of the most important use-cases is the quantum simulation of materials, using the variational quantum eigensolver (VQE). To optimize VQE performance, a suitable parameterized quantum circuit (ansatz) must be selected. We investigate a class of ansatze that incorporates knowledge of the quantum hardware, namely the hardware efficient ansatze. The performance of hardware efficient ansatze is affected differently by noise, and our goal is to study the effect of noise on evaluating which ansatz gives more accurate results in practice. First, we study the effect of noise on the different hardware efficient ansatze by benchmarking and ranking the performance of each ansatz family (i) on a chemistry application using VQE and (ii) by the recently established metric of "expressibility". The results demonstrate the ranking of optimal circuits does not remain constant in the presence of noise. Second, we evaluate the suitability of the expressibility measure in this context by performing a correlation study between expressibility and the performance of the same circuits on a chemistry application using VQE. Our simulations reveal a weak correlation and therefore demonstrate that expressibility is not an adequate measure to quantify the effectiveness of parameterized quantum circuits for quantum chemistry. Third, we evaluate the effect of different quantum device noise models on the ordering of which ansatz family is best. Interestingly, we see that to decide which ansatz is optimal for use, one needs to consider the specific hardware used even within the same family of quantum hardware.