RADAR/INS TIGHTLY-COUPLED INTEGRATION FOR LAND VEHICLE NAVIGATION

Abstract. Typically, in situations where Global Navigation Satellite System (GNSS) signals are unavailable, navigation systems rely on integrating GNSS and inertial navigation system (INS) data. While such integration can provide accurate positioning during short GNSS signal outages, it cannot sustain prolonged GNSS outages. The reason for this is that the system's performance depends solely on the INS and can result in significant errors over time. To address this issue, additional onboard sensors are necessary. This study proposes a navigation system that integrates INS and LiDAR simultaneous localization and mapping (SLAM) using an extended Kalman filter (EKF). The system was tested using the raw KITTI dataset in various outdoor driving scenarios without GNSS signals. It is shown that the proposed system significantly outperformed the INS-only system, with an average RMSE improvement of around 93% and 58% in the horizontal and the up directions, respectively.

Under the high dynamic conditions, Global Navigation Satellite System (GNSS) signals produce great Doppler frequency shifts, which hinders the fast acquisition of signals. Inertial Navigation System (INS)-aided acquisition can improve the acquisition performance, whereas the accuracy of Doppler shift and code phase estimation are mainly determined by the INS precision. The relation between the INS accuracy and Doppler shift estimation error has been derived, while the relation between the INS accuracy and code phase estimation error has not been deduced. In this paper, in order to theoretically analyze the effects of INS errors on the performance of Doppler shift and code phase estimations, the connections between them are re-deduced. Moreover, the curves of the corresponding relations are given for the first time. Then, in order to have a better verification of the INS-aided acquisition, a high dynamic scenario is designed. Furthermore, by using the deduced mathematical relation, the effects of different grade INS on the GNSS (including Global Positioning System (GPS) and BeiDou Navigation Satellite System (BDS)) signal acquisition are analyzed. Experimental results demonstrate that the INS-aided acquisition can reduce the search range of local frequency and code phase, and achieve fast acquisition. According to the experimental results, a suitable INS can be chosen for the deeply coupled integration.

In this paper, we develop a novel method to detect Global Navigation Satellite Systems (GNSS) spoofing for an Automatic Dependent Surveillance-Broadcast (ADS-B) equipped aircraft. The Federal Aviation Administration (FAA) has mandated [18] all civil aircraft to be ADS-B Out equipped by January 1, 2020. The ADS-B Out broadcast sent to Air Traffic Control (ATC) consists of the aircraft's position, velocity, and other aircraft-specific information, all of which being unencrypted, poses a serious integrity threat. With readily available ADS-B trackers [19], [20], a spoofer can accurately track an aircraft to generate a spoofed trajectory that can go undetected [11]. We propose a novel method to modulate the ADS-B Out position broadcast such that a spoofed trajectory generated using the modulated ADS-B will be detectable by comparing Inertial Navigation System (INS) positions against those obtained using the spoofed GNSS signal. The amplitude of ADS-B modulation is selected to exceed the nominal INS error covariance so that spoofing is observable. In this work, we analytically quantify the magnitude of ADS-B modulation that will be sufficient for spoofing detection. During scenarios of GNSS signal jamming and spoofing, reauthentication of a reacquired GNSS signal is necessary to maintain integrity. During a GNSS outage, given enough time, the INS solution drift will grow large enough such that the spoofed GNSS solution might be within the INS error covariance envelope and go undetected. For GNSS outage scenarios we propose continuous modulation of ADS-B position and analytically quantify the magnitude such that spoofing of the GNSS signal is detectable after signal is re-acquired.

Now a days, Unmanned Aerial Vehicles (UAVs) have been exploited in numerous civil and military aspects such as disaster management and border monitoring. Although most of these UAVs are equipped with Global Navigation Satellite System (GNSS) / Inertial Navigation System (INS) reliable integrated system for localization proposes, they are susceptible to lose their GNSS signals under some environmental and artificial challenging circumstances such as, flying in urban areas, jamming, and spoofing. In such complicated scenarios, the navigation solution will degrade rapidly due to the accumulated INS drift errors. Although various aiding sensors such as cameras, and radar are employed to mitigate the INS drift errors, their estimated positioning accuracy is still affected by some factors. This paper presents a nested optimal filter approach (G-H filter, Extended Kalman Filter (EKF)) for UAVs in GNSS denied environment, to enhance the estimated positioning accuracy by integrating the Radar Odometry (RO)/INS/MAG to sustain a reliable navigation solution during GNSS outage. First, the UAV relative velocity is calculated based on image processing approach from the radar range doppler map, then the G-H filter is deployed to improve the accuracy of the vehicle estimated forward velocities based on the vehicle dynamic characteristics to reduce the effect of unrealistic velocity estimate from the radar. These improved velocities are then fused with the Inertial Measurement Unit (IMU), magnetometer, and barometer via EKF to mitigate the positioning RMS errors during the GNSS signals outages. The experimental results demonstrate the proposed system's ability to notably enhance the 3D positioning accuracy during the GNSS signal outage by more than 99% when compared to a stand-alone IMU dead reckoning solution.

A signal of opportunity (SOP)-aided inertial navigation system (INS) framework is presented and studied. The following problem is studied. A mobile receiver with access to global navigation satellite system (GNSS) signals is aiding its onboard INS with GNSS pseudoranges. While navigating, the receiver draws pseudorange observations on ambient unknown terrestrial SOPs and estimates the SOPs' states. GNSS signals become unavailable, at which point the receiver uses the SOPs to aid its INS. It is demonstrated that fusing SOP pseudoranges in a tightly-coupled GNSS-SOP-INS framework produces a superior navigation solution to a traditional tightly-coupled GNSS-INS framework. Moreover, in the absence of GNSS signals, it is demonstrated that aiding the INS via SOPs produces bounded estimation errors. The SOP-aided INS's performance sensitivity is studied over varying quantity and quality of exploited SOPs. Experimental results are presented demonstrating a ground vehicle navigating exclusively with inertial measurement unit (IMU) data and pseudoranges from an unknown terrestrial SOP emanating from a cellular tower.

This paper investigates into the feasibility of a combined use of Ultra-wideband (UWB) and Global Navigation Satellite System (GNSS) / Inertial Navigation System (INS) for integrated navigation in GNSS challenged environments. The performance of the original integrated GNSS/INS navigation system deteriorated rapidly due to the GNSS signal outages. The position information provided by UWB is used as the observation quantity of Extend Kalman Filter (EKF) to make up for the influence of GNSS signal loss. Considering the positioning service performance provided by UWB is closely related to the geometric distribution of base station of UWB, an optimization searching based on maximum convex-hull (OSMC) method is adopted to establish the optimal base station layout scheme. The features of navigation have been investigated in vehicle test with the results showing clear evidence that the method can resist the impact of GNSS outages effectively and the positioning information are stable and reliable.

Continuous tracking and detecting position systems are significant services that can using in many applications such as detecting accident cars on Freeways. This paper introduces Artificial intelligent (AI) method to quick discover the accident and determine the position of car on Freeways that will reduce the rate of fatalities. Most tracking and detecting position systems are based on Global Navigation Satellite System (GNSS). But the GNSS signal in certain areas such as buildings and tunnel is unavailable which make a big problem for these systems. To solve this problem, most traditional methods are based on integrated GNSS with other navigation sensors such as accelerometers, gyroscopes, odometers and so on. But these integrated methods still high cost and need to long time processing. Today, most modern Vehicles are equipping with several On-board Car Motion Sensors (OVMS) such as Acceleration Sensors (AS), Wheel Velocity Sensor (WVS), Gravity Sensor (GS), Yaw Rate Sensor (YRS) and additional to GNSS that can improve the safety and also use to determine and detect the position of accident vehicle. This paper develops an approach AI-accident detection system based on integrating GNSS with On-board Vehicle Motion Sensors (OVMS) using Extended Kalman Filter (EKF) algorithm. During GPS outages, the three Acceleration Sensors (3-ASs) are processing to determine velocities and then position of vehicle on three x, y and z axes. While the YRS and GS sensors are using to determine velocities angles on three x, y and z axes, respectively. In same time the three WVS sensors are using to correct velocities errors of three acceleration sensors (3-ASs) until GNSS signal is return again. The proposed AI-accident detection system is tested in different scenarios during GPS outage signal. The results of proposed method can actually detect accident and determine the position of vehicle with high efficiency.

In urban road environments, global navigation satellite system (GNSS) signals may be interrupted due to occlusion by buildings and obstacles, resulting in reduced accuracy and discontinuity of combined GNSS/inertial navigation system (INS) positioning. Improving the accuracy and robustness of combined GNSS/INS positioning systems for land vehicles in the presence of GNSS interruptions is a challenging task. The main objective of this paper is to develop a method for predicting GNSS information during GNSS outages based on a long short-term memory (LSTM) neural network to assist in factor graph-based combined GNSS/INS localization, which can provide a reliable combined localization solution during GNSS signal outages. In an environment with good GNSS signals, a factor graph fusion algorithm is used for data fusion of the combined positioning system, and an LSTM neural network prediction model is trained, and model parameters are determined using the INS velocity, inertial measurement unit (IMU) output, and GNSS position incremental data. In an environment with interrupted GNSS signals, the LSTM model is used to predict the GNSS positional increments and generate the pseudo-GNSS information and the solved results of INS for combined localization. In order to verify the performance and effectiveness of the proposed method, we conducted real-world road test experiments on land vehicles installed with GNSS receivers and inertial sensors. The experimental results show that, compared with the traditional combined GNSS/INS factor graph localization method, the proposed method can provide more accurate and robust localization results even in environments with frequent GNSS signal loss.

A sparse global navigation satellite system (GLONASS) signal acquisition method based on compressive sensing and multiple measurement vectors is proposed. The nonsparse GLONASS signal can be represented sparsely on our proposed dictionary which is designed based on the signal feature. Then, the GLONASS signal is sensed by a normalized orthogonal random matrix and acquired by the improved multiple measurement vectors acquisition algorithm. There are 10 cycles of pseudorandom codes in a navigation message, and these 10 pseudorandom codes have the same row sparse structure. So, the acquisition probability can be raised by row sparse features theoretically. A large number of simulated GLONASS signal experiments show that the acquisition probability increases with the increase in the measurement vector column dimension. Finally, the practical availability of the new method is verified by acquisition experiments with the real record GLONASS signal. The new method can reduce the storage space and energy loss of data transmission. We hope that the new method can be applied to field receivers that need to record and transmit navigation data for a long time.

People have to move between indoor and outdoor frequently in city scenarios. The global navigation satellite system signal cannot provide reliable indoor positioning services. To solve the problem, this article proposes a seamless positioning system based on an inverse global navigation satellite system signal, which can extend the global navigation satellite system service into the indoor scenario. In this method, a signal source is arranged at a key position in the room, and the inverse global navigation satellite system signal is transmitted to the global navigation satellite system receiver to obtain a preset positioning result. The indoor positioning service is continued with the inertial navigation system after leaving the key position. The inverse global navigation satellite system seamless positioning system proposed in this article can unify indoor and outdoor positioning using the same receiver. The receiver does not need to re-receive navigation information when the scene changes, which avoids the switching process. Through the design of signal layer coverage, the receiver is in a warm start state, and the users can quickly fix the position when the scenario changes, realizing quick access in a true sense. This enables the ordinary commercial global navigation satellite system receiver to obtain indoor positioning capability without modification, and the algorithm can perform accurate positioning indoors and outdoors without switching.

Global Navigation Satellite System (GNSS) and Inertial Navigation System (INS) are the most commonly used navigation systems. They both have unique advantages and disadvantages. GNSS is capable of generating precise navigation solutions while enough satellites are in view. However, the GNSS signals are sensitive to the environment. While the signals is attenuated, the GNSS receiver will fail to provide reliable navigation solutions. INS is an advanced navigation system built based on Newton's law. Due to the random noises contained in the Inertial Measurement Unit (IMU), the INS navigation solutions errors diverge over time. Therefore, effective integration of the two common systems can obtain better navigation results than any individual system. In this paper, for enhancing the GNSS/INS tightly integration system with low cost, multiple receivers were employed in the tight integration. Pseudo-range and Pseudo-range rates from the multiple receivers were employed to compose the measurement vector of the integration filter. In order to reduce the computation load, a measurement difference method was proposed. The state vector dimension could be reduced with the measurement difference scheme. Both simulation and field test were carried out for evaluating the performance of the proposed method. Since it was hard to obtain GNSS raw measurements from commercial receivers, self-developed DSP+FPGA (Digital Signal Processor, DSP; Field Programmable Gate Array, FPGA) based GNSS receivers were employed in the field test. The statistical analysis of the results showed that the positioning errors decreased with the receiver's amount increasing. In addition, a measurement difference method was proposed to reduce the state vector dimension for saving the computation load with the identical navigation solutions accuracy.

In the near future, multi-sensor fusion will be the core component to navigate the autonomous driving platforms. This paper proposes new strategies to cope with the integration of an inertial navigation system (INS), a global navigation satellite system (GNSS), and light detection and ranging (LIDAR) to achieve simultaneous localization and mapping (INS/GNSS/LiDAR SLAM) especially in GNSS challenging environments where GNSS signals are blocked or contaminated with reflected signals. The proposed strategies implement a high level of integration with various information received from multiple sensors to collectively compensate for the specific drawbacks of those sensors included in the integrated system. The first strategy is to solve the divergence and drift problems of SLAM using the initial pose information from INS and the proposed refreshing process using an INS/GNSS integrated system. In addition, an updated mechanization is designed to qualify those received measurements based on cross validation of separate types of data. This mechanization is to ensure all measurements are reliable for the Extended Kalman Filter (EKF) update process. Moreover, the SLAM-derived information plays a major role to recognize the vehicle movement which assists the system to accurately apply those appropriate vehicle motion constraint models. The preliminary results presented in this study illustrate that proposed algorithm performs superior than the traditional INS/GNSS integration scheme and provides absolute navigation accuracy of 2 meters and 0.6% of distance traveled in GNSS-denied as well as 1.2 meters in GNSS-hostile environments, respectively.

The traditional measurement of signal bandwidth using single-carrier frequency sweeping is not suitable for global navigation satellite system (GNSS) signal. A new analysis technique of signal bandwidth with digital signal processing technique has been developed. After the GNSS signal is highly sampled, the spectrum of the actual GNSS signal and the ideal signal generated locally are evaluated in digital domain. The bandwidth of GNSS signal can be calculated. Simulation has been done for the proposed measurement technique using spectrum evaluation algorithm of the Periodogram and the Welch respectively. The simulation results shows that the GNSS signal bandwidth can be accurately estimated after the ideal and actual signal spectrum are evaluated and calculated using the Welch. The simulation results show that The estimating accurate of signal bandwidth can be higher than 99.9% in the case of the proper parameters have been set for Welch.

The integration of global navigation satellite system (GNSS) precise point positioning (PPP) and inertial navigation system (INS) is widely used in navigation for its robustness and resilience, especially in case of GNSS signal blockage. With GNSS modernization, a variety of PPP models have been developed and studied, which has also led to various PPP/INS integration methods. In this study, we investigated the performance of a real-time GPS/Galileo zero-difference ionosphere-free (IF) PPP/INS integration with the application of uncombined bias products. This uncombined bias correction was independent of PPP modeling on the user side and also enabled carrier phase ambiguity resolution (AR). CNES (Centre National d’Etudes Spatiales) real-time orbit, clock, and uncombined bias products were used. Six positioning modes were evaluated, including PPP, PPP/INS loosely coupled integration (LCI), PPP/INS tightly coupled integration (TCI), and three of these with uncombined bias correction through a train positioning test in an open sky environment and two van positioning tests at a complex road and city center. All of the tests used a tactical-grade inertial measurement unit (IMU). In the train test, we found that ambiguity-float PPP had almost identical performance with LCI and TCI, which reached an accuracy of 8.5, 5.7, and 4.9 cm in the north (N), east (E) and up (U) direction, respectively. After AR, significant improvements on the east error component were achieved, which were 47%, 40%, and 38% for PPP-AR, PPP-AR/INS LCI, and PPP-AR/INS TCI, respectively. In the van tests, frequent signal interruptions due to bridges, vegetation, and city canyons make the IF AR difficult. TCI achieved the highest accuracies, which were 32, 29, and 41 cm for the N/E/U component, respectively, and also effectively eliminated the solution re-convergence in PPP.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.