Random Convolutional Kernel Transform with Empirical Mode Decomposition for Classification of Insulators from Power Grid

Original lidar return signals are covered by high levels of noise that seriously affect the accuracy of subsequent data processing and inversion. Therefore, it is important to separate the effective signal from the returned signal with noise interference. In this paper, an efficient denoising method based on the variational mode decomposition (VMD) algorithm optimized using the global search strategy-based whale algorithm and the total variational stationary wavelet transform (GSWOA-VMD-SWTTV) is proposed, and this method is applied to denoising of lidar return signals. First, the global search strategy-based whale optimization algorithm (GSWOA) is used to acquire the optimal parameters of the VMD algorithm adaptively, and the lidar return signal is then decomposed by global search strategy-based whale optimization algorithm (GSWOA)-VMD. The effective modal components are then determined using the cross-correlation coefficient method from the decomposed modal components, and total variation stationary wavelet denoising is performed on each effective mode. Finally, the effective modes are reconstructed to obtain a clean lidar return signal. Moreover, to provide further verification of the effectiveness of the proposed method, it is compared with the ensemble empirical mode decomposition (EEMD) method, the complete EEMD with adaptive noise (CEEMDAN) method, the singular value decomposition (SVD) method, and the wavelet threshold method under sunny, cloudy, and dusty weather conditions. The experimental results demonstrate the superior noise reduction performance of the proposed algorithm, which can filter out strong noise from the signal while retaining the complete signal details without distortion; additionally, the proposed method has the highest signal-to-noise ratio and lowest mean square error.

An accurate prediction of carbon pricing is essential in carbon emission management, and also provides an important role for governments to formulate corresponding policies. However, due to the inherent complexity and dynamics of carbon price sequence, the effectiveness of different decomposition algorithms for carbon price remains to be tested. In addition, existing studies lack a systematic framework to explore the organic integration of external factors and secondary decomposition technology, and the feature processing of complex external factors still needs to be improved. In order to overcome the shortcomings of existing research, This paper presents a Variational Modal Decomposition(VMD) algorithm and a Complete Ensemble Empirical Mode Decomposition with Adaptive Second decomposition technology of Noise(CEEMDAN) decomposition algorithm, and extract the features of external factors by Extreme Gradient Boosting (XGBoost) algorithm. The HI-VMD-PE-CEEMDAN-XGBoost-Transformer model for predicting carbon price is constructed by the combined Transformer algorithm. Specifically, first, we use Hampel identifer(HI) to detect and rectify the anomalies in the original sequence. After applying Variational Mode Decomposition(VMD) decomposition algorithm, Permutation Entropy(PE) is utilized to reassemble the decomposed component. Quadratic Decomposition is performed by Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN) algorithm. Then, the XGBoost algorithm is employed to extract features of external factors and screen key factors as predictive input variables. Finally, Transformer, which has stronger capability of large-scale data parallel processing, is selected as the prediction model to achieve a more scientific and effective carbon price prediction. The empirical analysis results based on EU carbon market data verify the validity and superiority of the proposed model in different forecasting scenarios.

The performance of tissue imaging is improved by tissue harmonic imaging (THI) to expand and enhance the range and level of clinical diagnosis for many diseases. The separation based on High-pass filtering (S_HPF) is a commonly used method for extracting harmonic components from ultrasonic echo signals. However, the cut-off frequency, order and algorithm to realize a high-pass filter have a great influence on the separation accuracy of harmonic signals. In present study, a novel separation method (S_CEEMDAN) based on the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) algorithm is proposed for adaptively separating harmonic components from ultrasonic echo signals. First, we calculate the ensemble size of CEEMDAN adaptively based on the added noise level, and draw a sum of intrinsic mode functions (IMFs) from the ultrasonic echo signals by CEEMDAN. Then, the spectrum of each IMF is computed and evaluated, and the IMFs containing both fundamental and harmonic components are further decomposed by using the CEEMDAN algorithm. This separation process is end until all of IMFs have been divided into either fundamental or harmonic categories. Finally, the corresponding fundamental and harmonic echo signals are yielded by accumulating separately these two categories. In experiments, simulated ultrasonic echo signals with a center frequency of 3.5MHz are separated by the proposed S_CEEMDAN method, and the results are compared with those processed by S_HPF. The edge of the harmonic image by S_CEEMDAN marginally better defined than S_HPF. The indices for the harmonic signals separated by S_CEEMDAN and S_HPF, respectively, are as follows: the center frequencies of 6.66 MHz and 6.65 MHz, 3 dB bandwidths of 1.04 MHz and 1.05 MHz, 6 dB bandwidths of 1.59 MHz and 1.55 MHz, signal-to-noise ratios (SNRs) of 14.00 and 13.63, and image contrasts of 7.01 and 7.06. In conclusion, due to good adaptive characteristics, and lower reconstruction errors, the proposed S_CEEMD method is superior to S_HPF in the performance of spectral accuracy and harmonic imaging. This method could be potentially alternative to the current method for the ultrasonic harmonic separation.

From the viewpoint of BDS bridge displacement monitoring, which is easily affected by background noise and the calculation of a fixed threshold value in the wavelet filtering algorithm, which is often related to the data length. In this paper, a data processing method of Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN), combined with adaptive threshold wavelet de-noising is proposed. The adaptive threshold wavelet filtering method composed of the mean and variance of wavelet coefficients of each layer is used to de-noise the BDS displacement monitoring data. CEEMDAN was used to decompose the displacement response data of the bridge to obtain the intrinsic mode function (IMF). Correlation coefficients were used to distinguish the noisy component from the effective component, and the adaptive threshold wavelet de-noising occurred on the noisy component. Finally, all IMF were restructured. The simulation experiment and the BDS displacement monitoring data of Nanmao Bridge were verified. The results demonstrated that the proposed method could effectively suppress random noise and multipath noise, and effectively obtain the real response of bridge displacement.

Warships play an important role in the modern sea battlefield. Research on the line spectrum features of warship radio noise signals is helpful to realize the classification and recognition of different types of warships, and provides critical information for sea battlefield. In this paper, we proposed a novel linear spectrum frequency feature extraction technique for warship radio noise based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), duffing chaotic oscillator (DCO), and weighted-permutation entropy (W-PE). The proposed linear spectrum frequency feature extraction technique, named CEEMDAN-DCO-W-PE has the following advantages in comparison with other linear spectrum frequency feature extraction techniques; (i) as an adaptive data-driven algorithm, CEEMDAN has more accurate and more reliable decomposition performance than empirical mode decomposition (EMD) and ensemble EMD (EEMD), and there is no need for presetting parameters, such as decomposition level and basis function; (ii) DCO can detect the linear spectrum of narrow band periodical warship signals by way of utilizing its properties of sensitivity for weak periodical signals and the immunity for noise; and (iii) W-PE is used in underwater acoustic signal feature extraction for the first time, and compared with traditional permutation entropy (PE), W-PE increases amplitude information to some extent. Firstly, warship radio noise signals are decomposed into some intrinsic mode functions (IMFs) from high frequency to low frequency by CEEMDAN. Then, DCO is used to detect linear spectrum of low-frequency IMFs. Finally, we can determine the linear spectrum frequency of low-frequency IMFs using W-PE. The experimental results show that the proposed technique can accurately extract the line spectrum frequency of the simulation signals, and has a higher classification and recognition rate than the traditional techniques for real warship radio noise signals.

A comparative study between Empirical Wavelet Transforms and Empirical Mode Decomposition Methods: Application to bearing defect diagnosis

A hybrid forecasting model of carbon emissions with optimized VMD and error correction

In this paper, we propose a novel ECG signal enhancement method based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Higher Order Statistics (HOS). In our scheme, the noisy ECG signal is first decomposed adaptively into oscillatory components called intrinsic mode functions (IMFs) by using Empirical Mode Decomposition (EMD) or its variants. Therefore, the obtained modes are separated into two groups of noisy signal modes and one group of useful signal modes, by using a novel criterion derived from the HOS namely the fourth order cumulant or kurtosis. After that, a modified shrinkage scheme based on Interval Thresholding technique is adaptively applied to each selected IMF from the noise-dominant groups in order to reduce the noise and to preserve the QRS complex. The overall filtered ECG signal is then reconstructed by combining the thresholded IMFs and the retained unprocessed lower frequency relevant IMFs. Various tests and simulations are investigated to evaluate the performance of our proposed approach in combination with the EMD, Ensemble EMD (EEMD) and CEEMDAN algorithms. The simulation results carried on MIT-BIH Arrhythmia database, show that CEEMDAN method gives better performance than the two other methods, and outperforms some state-of-the-art methods in terms of Signal to Noise Ratio (SNR) and Root Mean Square Error (RMSE).

In the context of the clean and low-carbon transformation of power systems, addressing the challenge of day-ahead electricity market price prediction issues triggered by the strong stochastic volatility of power supply output due to high-penetration renewable energy integration, as well as problems such as limited dataset scales and short market cycles in test sets associated with existing electricity price prediction methods, this paper introduced an innovative prediction approach based on a multi-modal feature fusion and BiGRUSA-ResSE-KAN deep learning model. In the data preprocessing stage, maximum–minimum normalization techniques are employed to process raw electricity price data and exogenous variable data; the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and variational mode decomposition (VMD) methods are utilized for multi-modal decomposition of electricity price data to construct a multi-scale electricity price component matrix; and a sliding window mechanism is applied to segment time-series data, forming a three-dimensional input structure for the model. In the feature extraction and prediction stage, the BiGRUSA-ResSE-KAN multi-branch integrated network leverages the synergistic effects of gated recurrent units combined with residual structures and attention mechanisms to achieve deep feature fusion of multi-source heterogeneous data and model complex nonlinear relationships, while further exploring complex coupling patterns in electricity price fluctuations through the knowledge-adaptive network (KAN) module, ultimately outputting 24 h day-ahead electricity price predictions. Finally, verification experiments conducted using test sets spanning two years from five major electricity markets demonstrate that the introduced method effectively enhances the accuracy of day-ahead electricity price prediction, exhibits good applicability across different national electricity markets, and provides robust support for electricity market decision making.

The drift signal of Fiber Optic Gyroscope (FOG) is often buried in noise. It is difficult to compensate drift directly, and three filtering methods based on Empirical Mode Decomposition (EMD) are applied. Comparison analysis with filtering methods based on EMD, Ensemble Empirical Mode Decomposition (EEMD) and the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) is done. Experimental analysis results show that CEEMDAN outperforms than other denoising methods based on EMD and EEMD. The CEEMDAN method saves computational cost, requiring only 29.7% of the sifting iterations of the EEMD. Meanwhile, the rate white noise, bias instability and quantization noise involved in original signal is decreased from 0.0029°/√h , 0.0313°/h and 0.7814° to 0.0003°/√h , 0.0034°/h and 0.0111°, respectively, after applying CEEMDAN method.

In this study, different kinds of hybrid Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) algorithms with forecasting models including Random Forest (RF), Gated Recurrent Unit (GRU), and Long Short-Term Memory (LSTM) neural networks, are developed to estimate the mean daily wind speed at the height of 2 m in Ağrı city (WS st12 ), Turkey. In these hybrid models, different layer networks of single and integrated LSTM and GRU models include general single LSTM, general single GRU, simple coupled LSTM-GRU, and novel coupled LSTM with GRU through Addition layer (i.e., LSTM + GRU model) structures are applied. The most effective parameters on the WS st12 , from a list of on-site potential meteorological parameters and wind speed values in its adjacent cities of Ağrı province from Jan 2015–Dec 2019 through the Pearson correlation coefficient method, are determined. In the hybrid CEEMDAN and DNNs-based models, State activation functions (SAF), numbers of hidden neurons (NHN), dropout rates (P-rate), and network structural architect (NSA) as the meta-parameters are tuned for lessening the impact of overfitting/underfitting dilemmas and improving modeling performance. According to the comparison plots, performance evaluation measures, and total learnable parameter (TLP), the novel developed hybrid CEEMDAN-RF-(LSTM + GRU) model is confirmed as the best approach with an R 2 of 0.86 while, in the optimal scenario using the RF model, R 2 was 0.47. Graphical Abstract Based on the graphical snapshot, this study focuses on estimating daily mean wind speed at a 2-meter height in Ağrı, Turkey, using hybrid data-driven models. The research integrates the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) algorithm with advanced forecasting techniques, including Random Forest (RF), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU) neural networks. The modeling framework explores various configurations, such as standalone LSTM and GRU, coupled LSTM-GRU structures, and a novel LSTM + GRU model using an Addition layer to enhance predictive accuracy.

Financial time series forecasting model based on CEEMDAN and LSTM

Multistep short-term wind power forecasting model based on secondary decomposition, the kernel principal component analysis, an enhanced arithmetic optimization algorithm, and error correction

Short-term wind power prediction based on two-layer decomposition and BiTCN-BiLSTM-attention model

This paper focuses on studying the time-variant dynamics involved in the foetal heart rate (FHR) response resulting from the autonomic nervous system modulation. It provides a comprehensive analysis of such dynamics by relating the spectral information involved in the FHR signal with foetal physiological characteristics. This approach is based on two signal processing methods: the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and time-varying autoregressive (TV-AR) modelling. First, the CEEMDAN allows to decompose the signal into intrinsic mode functions (IMFs). Then, the TV-AR modelling allows to analyse their spectral dynamics. Results reveal that the IMFs can involve significant spectral information (p -value < 0.05) that can help to assess the foetal condition.