Random learning gradient based optimization for efficient design of photovoltaic models

As countries attach importance to environmental protection, clean energy has become a hot topic. Among them, solar energy, as one of the efficient and easily accessible clean energy sources, has received widespread attention. An essential component in converting solar energy into electricity are solar cells. However, a major optimization difficulty remains in precisely and effectively calculating the parameters of photovoltaic (PV) models. In this regard, this study introduces an improved rime optimization algorithm (RIME), namely ERINMRIME, which integrates the Nelder-Mead simplex (NMs) with the environment random interaction (ERI) strategy. In the later phases of ERINMRIME, the ERI strategy serves as a complementary mechanism for augmenting the solution space exploration ability of the agent. By facilitating external interactions, this method improves the algorithm’s efficacy in conducting a global search by keeping it from becoming stuck in local optima. Moreover, by incorporating NMs, ERINMRIME enhances its ability to do local searches, leading to improved space exploration. To evaluate ERINMRIME's optimization performance on PV models, this study conducted experiments on four different models: the single diode model (SDM), the double diode model (DDM), the three-diode model (TDM), and the photovoltaic (PV) module model. The experimental results show that ERINMRIME reduces root mean square error for SDM, DDM, TDM, and PV module models by 46.23%, 59.32%, 61.49%, and 23.95%, respectively, compared with the original RIME. Furthermore, this study compared ERINMRIME with nine improved classical algorithms. The results show that ERINMRIME is a remarkable competitor. Ultimately, this study evaluated the performance of ERINMRIME across three distinct commercial PV models, while considering varying irradiation and temperature conditions. The performance of ERINMRIME is superior to existing similar algorithms in different irradiation and temperature conditions. Therefore, ERINMRIME is an algorithm with great potential in identifying and recognizing unknown parameters of PV models.

Parameters identification of photovoltaic models by using an enhanced adaptive butterfly optimization algorithm

Parameters identification of photovoltaic models using niche-based particle swarm optimization in parallel computing architecture

This paper presents a critical analysis of the meta-heuristic techniques used in various researches on the optimisation of photovoltaic (PV) parameters, which involves the use of different algorithms in order to extract and improve these parameters from the single diode model (SDM), double diode model (DDM) and three diode model (TDM) respectively. The modelling parameters such as the photon current, saturation current, the series and parallel resistances are investigated to understand the optimum value. It will also equate the results of datasheet values from PV manufactures with experiment values obtained from PV module measurements. The meta-heuristics techniques to be considered include genetic algorithm (GA), particle swarm optimisation (PSO), harmony search (HS), flower pollination algorithm (FPA), simulated annealing (SA), teaching learning based optimisation (TLBO), and other different hybrid solutions to optimize the convergence speed. Root mean square error (RMSE) is used as a performance indicator of each meta-heuristic technique. These optimisation techniques are utilised in extracting the parameters of a 5 W polycrystalline panel at standard testing conditions. The results presented in this paper compared the performances of the mentioned meta-heuristics on the single, double and triple diode models respectively.

Among all renewable energy sources, solar cells are considered the most popular solution for a clean source of energy and have a wide range of applications from few watts to Megawatt industrial and domestic loads. Building a precise mathematical model based on nonlinear equations for solar cells as well as photovoltaic (PV) modules is an essential issue for reasonable performance assessment, control and optimal operation of PV energy systems. In the current study, a novel optimization algorithm, Tree Growth Algorithm (TGA), is applied for accurate and efficient extraction of the unknown solar cell and PV module parameters. TGA is applied for estimating the unidentified parameters of PV models. Single diode model (SDM), double diode model (DDM) and three diode model (TDM) are investigated in the mathematical models of both solar cells and PV modules. The obtained results from the application of TGA to achieve this objective are compared with different algorithms reported in the literature. Moreover, the results demonstrated that the proposed algorithm of TGA superior to other reported methods. The good matching of the I-V characteristic curve of the computed parameters with those of the measured data from the manufacturer’s PV modules/cells datasheet proved that the proposed TGA may function as a competitor to the methods provided in literature for parameters’ identification of PV of solar cells.

This research paper systematically reviewed and investigated single diode model and double diode model of a solar photovoltaic systems in terms of accuracy, differences under major unknown PV parameters, different optimization and fabrication. This research paper reviewed the differences and the similarities between the single diode model and double diode model. From the review, it was clear that single diode model has less computation time and number of unknown parameters compared to double diode model. The double diode model on its own superiority is more accurate under solar shading condition effect than single diode model but single diode model performs better under high insolation levels. None of the two models is superior than the other but the solar photovoltaic modelers/installers should bear the solar irradiance of the environment before installation

This study proposes an improved Black-Winged Kite Algorithm (SRQ-BKA) for accurate parameter identification of the photovoltaic (PV) double diode model (DDM). The proposed method integrates three key mechanisms: specular reflection learning (SRL) to improve initial population diversity, preventing premature convergence and enabling a more comprehensive exploration of the solution space for optimal parameters; soft rime search (SRS) to balance global exploration and local exploitation, ensuring efficient identification by dynamically adjusting the search focus; and quadratic interpolation (QI) to accelerate convergence by fine-tuning the search toward optimal parameters, enhancing accuracy and speeding up the identification process. The root mean square error (RMSE) is employed as the objective function to minimize the error between the measured and predicted I-V characteristics of the PV module. Experimental results demonstrate that the SRQ-BKA outperforms other algorithms, achieving a minimum RMSE of 0.00262 A for the DDM and exhibiting strong stability, as evidenced by an average RMSE of 0.00278 A across 1000 runs. The method also demonstrates excellent parameter identification accuracy for both the single diode model (SDM) and triple diode model (TDM), further validating its robustness and practical applicability.

Clean energy resources have become a worldwide concern, especially photovoltaic (PV) energy. Solar cell modeling is considered one of the most important issues in this field. In this article, an improvement for the search steps of the bald eagle search algorithm is proposed. The improved bald eagle search (IBES) was applied to estimate more accurate PV model parameters. The IBES algorithm was applied for conventional single, double, and triple PV models, in addition to modified single, double, and triple PV models. The IBES was evaluated by comparing its results with the original BES through 15 benchmark functions. For a more comprehensive analysis, two evaluation tasks were performed. In the first task, the IBES results were compared with the original BES for parameter estimation of original and modified tribe diode models. In the second task, the IBES results were compared with different recent algorithms for parameter estimation of original and modified single and double diode models. All tasks were performed using the real data for a commercial silicon solar cell (R.T.C. France). From the results, it can be concluded that the results of the modified models were more accurate than the conventional PV models, and the IBES behavior was better than the original BES and other compared algorithms.

In this paper the modelling of the photovoltaic module has been applied through the experimental flash test data of industrial photovoltaic module. The theoretical background of the single diode model and the double diode model of the photovoltaic module have been described and similar procedures for the extraction and estimation of the unknown parameters have been proposed. The Levenberg-Marquardt optimization algorithm has been used to minimize objective function as a set of five nonlinear equations that were written for five equilibrium points on the current-voltage curve of the photovoltaic module. The single diode model and double diode model have then been simulated with the estimated unknown parameters and a very good matching between flash test data and a simulation data.

Photovoltaic technology, which converts the sun’s light energy directly into electricity, can be used to make photovoltaic cells. The use of photovoltaic cells is centered on the idea of a low-carbon economy and green environmental protection, which effectively addresses the pollution problem in smart cities. Accurate identification of photovoltaic cell parameters is critical for battery life cycle and energy utilization. To accurately identify the single diode model (SDM), dual diode model (DDM), and three diode model (TDM) parameters of solar photovoltaic cells, and an improved honey badger algorithm (IHBA) is proposed in this paper. In the early stages of iteration, the IHBA uses the spiral exploration mechanism to improve the population’s global exploration ability. Furthermore, a density update factor that varies according to the quasi-cosine law is introduced to speed up the algorithm’s convergence speed and prevent the algorithm from falling into the local optimal value. Simultaneously, the pinhole imaging strategy is utilized to disturb the present optimal position to improve the algorithm’s optimization accuracy. The experimental comparison results of 18 benchmark test functions, Wilcoxon rank sum statistical test, and 30 CEC2014 test functions reveal that an IHBA shows remarkable performance in convergence speed, optimization accuracy, and robustness. Finally, the IHBA is used to identify the parameters of three kinds of commercial silicon R.T.C French solar photovoltaic cell models with a 57 mm diameter. In comparison to other algorithms, the IHBA can minimize the root mean square error (RMSE) between the measured current and estimated current at the fastest speed, demonstrating the practicality and superiority of the IHBA in tackling this problem.

The electric charged particles optimization (ECPO) technique is inspired by the interaction (exerted forces) between electrically charged particles. A developed version of ECPO called MECPO is suggested in this article to enhance the capability of searching and balancing the exploitation and exploration phases of the conventional ECPO. To let the search agent jumps out from the local optimum and avoid stagnation in the local optimum in the proposed MECPO, three different strategies in the interaction between ECPs are modified in conjunction with the conventional ECPO. Therefore, the convergence rate is enhanced and reaches rapidly to the optimal solution. To evaluate the effectiveness of the MECPO, it is executed on the test functions of the CEC’17. Furthermore, the MECPO technique is suggested to estimate the parameters of different photovoltaic models, such as the single-diode model (SDM), the double-diode model (DDM), and the triple-diode model (TDM). The simulation results illustrate the validation and effectiveness of MECPO in extracting parameters from photovoltaic models.

This paper compares two methods for extraction of photovoltaic (PV) module parameters. The numerical method called Gauss-Seidel, used on the single diode model, and the analytical method applied on the double diode model. Both methods are based on the manufacturer’s datasheets to extract the five parameters. These methods are validated using monocrystalline PV module. The modified mathematical modeling equations are classified into models 1 to 5. Only model 2 and model 4 are used for the analytical method. Each model is based on the different combinations of the ideality factor, the series resistance, photocurrent and saturation current plotted under varying temperature and irradiance. The accuracy of PV module based on both methods is evaluated by Absolute Error (AE). In order to evaluate the effectiveness and accuracy of the proposed methods, the equations were implemented in the MATLAB/Simulink environment and the results obtained are compared with extracted experimental data.

The modeling and control of photovoltaic and other engineering systems highly depend on the accuracy of parameter identification. However, parameter extraction for photovoltaic equivalent models typically presents a high-dimensional, strongly nonlinear, and multimodal global optimization problem. Traditional analytical or gradient-based methods are sensitive to initial values and easily fall into local optima. To address this issue, this paper proposes a multi-strategy improvement teaching–learning-based optimization algorithm (SNTLBO). A social learning network structure with symmetric interaction topology is introduced into the classical TLBO framework to characterize the knowledge propagation relationships among individuals. Through this symmetric and balanced information exchange mechanism, learners can be guided not only by the teacher but also by multiple neighbors within the network, enabling more diverse and symmetric exploration of the search space and enhancing population diversity and global search capability. Furthermore, a teacher reputation mechanism is constructed, where historical performance is used to weight teacher influence, strengthening the guidance of high-quality solutions and accelerating convergence. Meanwhile, an adaptive teaching factor is designed to dynamically adjust the teaching intensity based on the distance between the teacher and students in the solution space, maintaining a dynamic balance (symmetry) between exploration and exploitation. To evaluate the performance of the proposed algorithm, SNTLBO is systematically compared with 11 advanced optimization algorithms on two benchmark test suites, CEC2017 (30D, 50D) and CEC2022 (10D, 20D). Non-parametric statistical tests are conducted to assess significance. The results demonstrate that SNTLBO shows competitive advantages in terms of convergence speed, solution accuracy, and stability. Finally, SNTLBO is applied to the parameter estimation of single-diode, double-diode, triple-diode, quadruple-diode, and photovoltaic module models. Experimental results show that the proposed algorithm achieves higher identification accuracy and robustness in terms of RMSE, IAE, and I–V/P–V curve fitting, verifying its effectiveness and practical value for complex global optimization and practical engineering applications.

Perovskite solar cells (PSCs) are third-generation photovoltaic technology that has gained a lot of attention due to its technological and economic advantages. The PSCs are characterized with low cost, high absorption, long carrier diffusion length, and low fabrication temperature. To model the performance of PSCs, a new dynamic model is proposed to track the cells hysteresis by adding a variable voltage capacitor to the single, double, and triple diode models. The aim with adding the variable capacitor is to emulate the effect of charge accumulation at the interfaces of the device. Three modified models are presented based on one or more variable capacitors at single, double, and triple diode models. Where, the triple diode model with third order variable voltage capacitor model is the best among all models by 74.9% enhancement in comparison with single diode model. Also, the Equilibrium optimization algorithm (EOA) is proposed to determine the parameters of the proposed dynamic model based on the triple diode model. In comparison with the experimental data, for both forward and reverse scans, the findings showed that the suggested model accurately reflects cell performance. Added to that, the EOA finds well the optimal model parameters considering the root mean square as primary objective function. Based on the simulation results, it was proved that the proposed model gives very close results to reality.

Photovoltaic parameter estimation using honey badger algorithm and African vulture optimization algorithm