Reachability for Finite-State Process Algebras Using Static Analysis

Static and dynamic program analysis techniques are important research areas in software security. Static analysis helps us locate vulnerabilities in a software by looking at the source code. Dynamic analysis helps us reason about the behavior of the software from information gathered at run-time. In this thesis, we are focusing on data flow analysis and heap analysis which are key static and dynamic program analysis techniques respectively.
\n
\nIn the first part of this thesis, we aim at detecting vulnerabilities in Android applications which have capability leaks. The security of the Android platform relies mainly on sandboxing applications and restricting their capabilities such that no application, by default, can perform any operations that would adversely impact other applications, the operating system, or the user. However, a recent research reported that a genuine but vulnerable application may leak its capabilities. When being leveraged, other applications can gain extra capabilities which they are not granted originally. We present DroidChecker, an Android application analyzing tool which searches for the aforementioned vulnerability in Android applications. DroidChecker uses interprocedural control flow graph searching and static taint checking to detect exploitable data paths in an Android application. We analyzed more than 1100 Android applications using DroidChecker and found 6 previously unknown vulnerable applications including the renowned Adobe Photoshop Express application. We also developed a malicious application that exploits the previously unknown vulnerability found in the Adobe Photoshop Express application. We showed that the malicious application, which is not granted any permissions, can access contacts on the phone with just a few lines of code.
\n
\nIn the second part of this thesis, we explore the use of heap analysis to extract software birthmarks. There are techniques like code obfuscation and watermarking which can make the source code of a program difficult to understand by humans and prove the ownership of the program. However, code obfuscation cannot avoid the source code being copied and a watermark can be defaced. A birthmark is a group of unique characteristics a program possesses that can be used to identify the program. We propose two novel dynamic birthmark systems based on the run-time heap. A dynamic birthmark is one that is extracted when the program is executing. Since it is based on the run-time behavior of the program, semantics-preserving transformations of the code like obfuscation cannot defeat dynamic birthmarks. In this regard, dynamic birthmarks are more robust compared with static birthmarks.
\n
\nTo the best of our knowledge, these are the first birthmark systems using heap analysis as the underlying technique. The basic idea is to take snapshots of the heap while the program is running. From the snapshots, heap graphs are constructed to model the referencing structure between objects. After going through some filtering and referencing processes, they become the birthmarks. The two birthmark systems have been devised to extract birthmarks for Java programs and JavaScript programs respectively. While the underlying ideas of the two birthmark systems are similar, the differences in nature of the two programming languages led to different implementation designs.

An experimental data flow analyzer for PL/I programs has been implemented within the PROBE system developed at the GM Research Laboratories. PROBE is an experimental software package that examines the internal structure of PL/I programs in order to expose error-prone design and programming features. This paper describes 1) the algorithms and data structures used by the data flow analyzer, 2) the salient aspects of PL/I usage in the analyzed production-level programs, and 3) the results of the data flow analysis.

The incorporation of time into classical process algebras aiming at the integration of functional design and performance analysis has become very popular recently. There are many ways to include time in process algebras. Current research in this area concentrates mainly on the annotation of actions with exponentially distributed random variables. This allows us to make use of a large repertoire of analysis algorithms. This paper presents some first results of ongoing work which aims at providing a tool for the efficient performance evaluation and functional analysis of computer and communication systems based on the stochastic process algebra paradigm. It provides facilities for model creation, reachability analysis, as well as several numerical algorithms for the solution of the underlying Markov chain and the computation of characteristic performance measures.

Data flow analysis is used widely in program compilation, understanding, design, and analysis tools. In data flow analysis, problem-specific information is associated with nodes and/or edges in the flow graph representation of a program or component and re-comp\-uted iteratively. A popular data flow analysis design relies on a worklist that stores all nodes and edges whose data flow information has to be re-computed. While this approach is straightforward, it has some drawbacks. First, the presence of the worklist makes data flow algorithms centralized, which may reduce effectiveness of parallel implementations of these algorithms. Second, the worklist approach is difficult to implement in a way that minimizes the amount of information passed between flow graph nodes.In this paper, we propose to use the well-known Observer pattern for implementation of data flow analyses. We argue that such implementations are more object-oriented in nature, as well as less centralized, than worklist-based ones. We argue that by adopting this Observer-based view, data flow analyses that minimize the amount of information passed between flow graph nodes can be implemented easier than by using the worklist view. We present experimental data indicating that for some types of data flow problems, even single-threaded implementations of Observer-based data flow analysis have better run times than comparable worklist-based implementations.

A range of static analysis tools and techniques have been developed in recent years with the aim of helping JavaScript web application programmers produce code that is more robust, safe, and efficient. However, as shown in a previous large-scale study, many web applications use the JavaScript eval function to dynamically construct code from text strings in ways that obstruct existing static analyses. As a consequence, the analyses either fail to reason about the web applications or produce unsound or useless results.<br/><br/>We present an approach to soundly and automatically transform many common uses of eval into other language constructs to enable sound static analysis of web applications. By eliminating calls to eval, we expand the applicability of static analysis for JavaScript web applications in general.<br/><br/>The transformation we propose works by incorporating a refactoring technique into a dataflow analyzer. We report on our experimental results with a small collection of programming patterns extracted from popular web sites. Although there are inevitably cases where the transformation must give up, our technique succeeds in eliminating many nontrivial occurrences of eval.

Android access control granularity based on its permission mechanism is relatively coarse, which cannot effectively protect the user privacy. Many Android applications do not strictly abide by the principle of least privilege (PLP). Both benign and malicious apps may request more permissions than those they really use. We rethink previous permission over-claim problem of Android applications, and extend it to three kinds of problems: Explicit Permission Over-claim, Implicit Permission Over-claim and Ad Library Permission Over-claim. The latter two problems are new that have not been raised by any previous work. Static analysis is to decompile the applications to generate intermediate code and then analyze the usage of permissions. Our static analysis on 10710 applications shows that 76.08% of them may have Explicit Permission Over-claim problem, among those there are 424 applications that have sensitive permissions, which are only used in the advertisement library’s code of the applications rather than developer’s own code. They have Ad Library Permission Over-claim problem. The main idea of our semantic analysis is to calculate the semantic similarity between apps’ descriptions and function phrases. If the similarity exceeds a certain threshold, the app is considered relevant to the corresponding function. We compare the results of the semantic analysis with those of manual reading of 102 Android application descriptions. The F-measures of the three chosen functions are 80.82%, 70.48% and 89.62%, respectively. The evaluation results show our method can efficiently detect the above three kinds of permission over claim problems which indicates that our method would be helpful for normal users to have a clear understanding of permission usage of Android applications.

We consider the problem of analyzing multi-threaded programs with recursive calls, dynamic creation of parallel procedures, and communication. We model such programs by Process Rewrite Systems (PRS) which are sets of term rewriting rules. Terms in this framework represent program control structures. The semantics of PRS systems is defined modulo structural equivalences on terms expressing properties of the operators appearing in the terms (idle process, sequential composition, and asynchronous parallel composition). We consider the problem of reachability analysis of PRSs under constraints on the execution actions. This problem is undecidable even for regular constraints. [LS98] showed that it becomes decidable for decomposable constraints for the PRS subclass PA if structural equivalences are not taken into account. In this work, we go further and show that for decomposable constraints, we can compute tree automata representations of the constrained reachability sets for the whole class of PRS modulo different structural equivalences. Our results can be used to solve program (data flow) analysis and verification problems that can be reduced to the constrained reachability analysis problem.

EDSA (expert data flow and static analysis tool) which uses static analysis of source code to help gain an understanding of existing code, is described. This may be for the purpose of tracking down a bug or to determine in advance whether an intended change will have any undesirable side effects. In either case, the phase of the development life cycle that is most likely to benefit from a tool like EDSA is the maintenance phase. EDSA provides three kinds of facilities. It helps to browse through code, following either the control flow or data flow, rather than the order in which the code happens to be written. It displays code with unimportant source lines eluded, so that the user can get a more global view of the program. Finally, it provides search management to make it easier to examine all possibilities when browsing. The mechanism used to create and display various views of programs is described and the approach to the user interface is discussed. The state of the current implementation is described. >

The ways that the methods of data flow analysis can be applied to improve software reliability are described. There is also a review of the basic terminology from graph theory and from data flow analysis in global program optimization. The notation of regular expressions is used to describe actions on data for sets of paths. These expressions provide the basis of a classification scheme for data flow which represents patterns of data flow along paths within subprograms and along paths which cross subprogram boundaries. Fast algorithms, originally introduced for global optimization, are described and it is shown how they can be used to implement the classification scheme. It is then shown how these same algorithms can also be used to detect the presence of data flow anomalies which are symptomatic of programming errors. Finally, some characteristics of and experience with DAVE, a data flow analysis system embodying some of these ideas, are described.

Code optimization improves program performance through program analysis and program transformation, which transforms the program in an equivalent form. The basis of optimization is data flow analysis and control flow analysis. The paper first analyzes the characterization of Mgrid and the kernel Resid routine, including architecture analysis, data flow analysis, and dependence analysis, which is the basis of static optimization. Based on these characterization data, we first apply static optimization to Resid, including DMA access, data reuse, overlapping of computing and DMA, loop unrolling, common sub-expression extraction, Input Value Embedding, etc. and then loop blocking is applied to Resid, and genetic algorithm is utilized to search for the near-optimal blocking size, which further improves the performance of static optimization. The performance of Mgrid is improved by combing static analysis and empirical search, which is verified during the experiments.

Static program analysis is used to summarize properties over all dynamic\nexecutions. In a unifying approach based on 3-valued logic properties are\neither assigned a definite value or unknown. But in summarizing a set of\nexecutions, a property is more accurately represented as being biased towards\ntrue, or towards false. Compilers use program analysis to determine benefit of\nan optimization. Since benefit (e.g., performance) is justified based on the\ncommon case understanding bias is essential in guiding the compiler.\nFurthermore, successful optimization also relies on understanding the quality\nof the information, i.e. the plausibility of the bias. If the quality of the\nstatic information is too low to form a decision we would like a mechanism that\nimproves dynamically.\n We consider the problem of building such a reasoning framework and present\nthe fuzzy data-flow analysis. Our approach generalize previous work that use\n3-valued logic. We derive fuzzy extensions of data-flow analyses used by the\nlazy code motion optimization and unveil opportunities previous work would not\ndetect due to limited expressiveness. Furthermore we show how the results of\nour analysis can be used in an adaptive classifier that improve as the\napplication executes.\n

On object initialization in the Java bytecode

Most of the offshore wind turbines (OWT) recently installed in Europe, China and North America are in shallow water. However, unlocking the full potential of OWT lies in deeper waters. Jacket substructures have presented themselves as a reliable foundation concept for transitional water depth. This study focuses on the structural static and dynamic analysis of the traditional jacket substructures (with X and K bracing) and the recently patented three-legged twisted jackets (with a twisted angle of 30 and 60 degrees) for deployment in transitional water (beyond 60 m). To facilitate comparison, the dimensions of all the jackets remain the same, while, the geometric configurations are distinct. Static analysis was implemented to better understand the global load bearing behaviour of the jackets. First, the global displacement patterns at the tower top are compared. The individual reactions at mud-line were investigated, followed by the evaluation of the maximum von Mises stress. Subsequently, this research went on to investigate the effect of dynamic loading. In this dynamic analysis, three main critical points were considered, including the wave point (67 m), the platform and the tower top. A modal analysis was performed to compute the mode shapes and natural frequencies for all the jackets. The first five modes of all the jackets were also checked against the results available for the OC4 project. A similar analytical approach was adopted for the structural design of monopile or tripod foundations for offshore wind turbines. The results showed that in the static analysis both the traditional jackets and the twisted jackets were safe under the provided load combination. The twisted jacket proved to possess excellent structural behaviour compared to the traditional four-legged jackets, while maintaining the merits of lower material usage with fewer nodes. Analysing the von Mises stress revealed that the maximum stress occurred at the transition piece and close to the working platform. The modal analysis results of the jackets demonstrated that the twisted jackets (30 and 60 degrees) with the first natural frequency of 0.29 and 0.31 Hz fell under the soft-stiff design category whereas the traditional four-legged jackets were classified as stiff-stiff designs. The discovered structural performance of OWTs equipped with various jacket foundations contributes to the preliminary structural selection and optimal design of foundations of OWTs to be installed in transitional water.

A number of coverage criteria have been proposed for testing classes and class clusters modeled with state machines. Previous research has revealed their limitations in terms of their capability to detect faults. As these criteria can be considered to execute the control flow structure of the state machine, we are investigating how data flow information can be used to improve them in the context of UML state machines. More specifically, we investigate how such data flow analysis can be used to further refine the selection of a cost‐effective test suite among alternative, adequate test suites for a given state machine criterion. This paper presents a comprehensive methodology to perform data flow analysis of UML state machines—with a specific focus on identifying the data flow from OCL guard conditions and operation contracts—and applies it to a widely referenced coverage criterion, the round‐trip path (transition tree) criterion. It reports on two case studies whose results show that data flow information can be used to select the best transition tree, in terms of cost effectiveness, when more than one satisfies the transition tree criterion. The results also suggest that different trees are complementary in terms of the data flow that they exercise, thus, leading to the detection of intersecting but distinct subsets of faults. Copyright © 2009 John Wiley &amp; Sons, Ltd.

Dynamic response due to cable rupture in a transmission lines guyed towers