• Home
  • Search
  • Reactive ion etching of SiC thin films using fluorinated gases
  • Cite Icon101
  • https://doi.org/10.1116/1.583329Copy DOI Icon

Reactive ion etching of SiC thin films using fluorinated gases

  • Abstract
  • Literature Map
  • Citations
  • Similar Papers
Abstract

Reactive ion etching (RIE) using fluorinated gases, such as admixtures of CF4 with O2, has been conducted on sputter deposited films of SiC. For comparison purposes, the same experiments with SiO2 films and Si wafers have been conducted. The influence of rf power, pressure, and O2 concentration on etch rate in CF4+O2, SF6+He, and Ar gases has been investigated. RIE mechanisms were studied using in situ monitoring of excited fluorine emission intensity and dc self-bias at the lower electrode. Typical etch rates of Si, SiO2, and SiC are 1220, 600, and 375 Å/min in CF4+4% O2; 8850, 500, and 560 Å/min in SF6+50% He; and 340, 280, and 270 Å/min in Ar, respectively, at P=200 W, p=20 mTorr, and 300 K. Under these conditions the dc self-bias levels are −396 V for CF4+4% O2, −350 V for SF6+50% He, and −414 V for Ar. In both CF4+4% O2 and SF6+50% He, the etch rates of Si, SiO2, and SiC all increase monotonically with the rf power. However, with increasing pressure the Si etch rate increases while the etch rates of SiO2 and SiC decrease. Since the dc self-bias varies proportionally with power and inversely with pressure, it is clear that the etching of Si is chemical reaction rate controlled. On the other hand, the etch rate of SiC depends on the ion bombardment energy and is thus dominantly controlled by a physical reaction. The SiC etch rate exhibits a weak dependence on O2 concentration in CF4+O2 mixtures. The dc self-bias is not affected by increasing O2 concentration, but the SiC etch rate is slightly enhanced. This suggests that a certain etching inhibitor layer exists on the surface of SiC, which can weakly react with the O2 plasma. Auger electron spectroscopy data indicates that this layer consists of carbon atoms.

Similar Papers
  • Research Article
  • Citations18

Integrated equipment-feature modeling investigation of fluorocarbon plasma etching of SiO2 and photoresist

  • Mar 01, 2003
  • Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
  • Da Zhang +3
  • Research Article
  • Citations2

Anisotropic and Selective Reactive Ion Etching of SiC in CHF3 and Oxygen Plasma

  • Jan 01, 1986
  • MRS Proceedings
  • W-S Pan +1
  • Research Article
  • Citations2

The selectivity of poly Si and SiO2 etching using a negative dc biasing of powered electrode

  • Jul 01, 1986
  • Vacuum
  • Jozef Brčka +2
  • Research Article

Mechanistic Analysis and Process Characteristics of Si 3 N 4 and SiO 2 Etching Using C 4 H 2 F 6 Isomers

  • Aug 01, 2025
  • Journal of Nanoelectronics and Optoelectronics
  • Ho June Chang +3
  • Research Article
  • Citations10

High rate and highly selective anisotropic etching for WSix/poly-Si using electron cyclotron resonance plasma

  • May 01, 1996
  • Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
  • Kazuo Nojiri
  • Research Article
  • Citations17

Comparison of etch rates of silicon nitride, silicon dioxide, and polycrystalline silicon upon O2 dilution of CF4 plasmas

  • Nov 01, 1989
  • Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena
  • Paul E Riley +1
  • Research Article
  • Citations107

Effects of Ar and O2 additives on SiO2 etching in C4F8-based plasmas

  • Dec 20, 2002
  • Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
  • Xi Li +6
  • Research Article
  • Citations17

Understanding the contributions of F–, HF, and HF2– to the etching of SiO2 and unveiling the reaction kinetics to represent etching behavior of SiO2 up to pH 5

  • Mar 03, 2024
  • Applied Surface Science
  • Bumsik Kim +2
  • Research Article
  • Citations16

Laser-Induced Fluorescence Diagnostics of CF4/O2/H2 Plasma Etching

  • Jan 01, 1982
  • MRS Proceedings
  • S Pang +1
  • PDF
  • Research Article
  • Citations12

Plasma Etching of SiO2 Contact Holes Using Hexafluoroisopropanol and C4F8

  • May 16, 2022
  • Coatings
  • Sanghyun You +3
  • Research Article
  • Citations30

Neutral-Beam-Assisted Etching System for Low-Damage SiO2 Etching of 8-Inch Wafers

  • Mar 01, 1996
  • Japanese Journal of Applied Physics
  • Ken'Etsu Yokogawa +2
  • Research Article

Thermal Budget Reduction in Triple Gate Oxide Process by Wet Etch Technique

  • Apr 15, 2017
  • Electrochemical Society Meeting Abstracts
  • Hsin Tai +6
  • PDF
  • Research Article
  • Citations9

Necking Reduction at Low Temperature in Aspect Ratio Etching of SiO2 at CF4/H2/Ar Plasma

  • Jan 17, 2024
  • Nanomaterials
  • Hee-Tae Kwon +10
  • Research Article
  • Citations8

Effect of temperature on deposition layer formation in HBr/N2/fluorocarbon-based plasma

  • May 11, 2017
  • Japanese Journal of Applied Physics
  • Taku Iwase +2
  • Research Article
  • Citations5

Effect of source frequency and pulsing on the SiO2 etching characteristics of dual-frequency capacitive coupled plasma

  • Dec 16, 2014
  • Japanese Journal of Applied Physics
  • Hoe Jun Kim +5
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.