Reduced-dimension space-time adaptive processing based on angle-Doppler correlation coefficient

The space–time adaptive processing (STAP) technique can effectively suppress the ground clutter faced by the airborne radar during its downward-looking operation and thus can significantly improve the detection performance of moving targets. However, the optimal STAP requires a large number of independent identically distributed (i.i.d) samples to accurately estimate the clutter plus noise covariance matrix (CNCM), which limits its application in practice. In this paper, we fully consider the heterogeneity of clutter in real-world environments and propose a sparse Bayesian learning-based reduced-dimension STAP method that achieves suboptimal clutter suppression performance using only a single sample. First, the sparse Bayesian learning (SBL) algorithm is used to estimate the CNCM using a single training sample. Second, a novel angular Doppler channel selection algorithm is proposed with the criterion of maximizing the output signal-to-clutter-noise ratio (SCNR). Finally, the reduced-dimension STAP filter is constructed using the selected channels. Simulation results show that the proposed algorithm can achieve suboptimal clutter suppression performance in extremely heterogeneous clutter environments where only one training sample can be used.

The performance of the optimal and reduced-dimension Space-Time Adaptive Processing (STAP) algorithms for the airborne phased array radar is investigated in this paper. The clutter suppression in the mainbeam and the sidelobe clutter regions and the computation load are analyzed and compared between the optimal and two kinds of typical reduced-dimension STAP algorithms, i.e. the 2-D temporal-spatial adaptive algorithm (TSA) and the m-bins Doppler transform-space adaptive processing (mDT-SAP) algorithm. Based on the performance analysis of these STAP algorithms, a new clutter suppression strategy is proposed with consideration of actual clutter environment and the spatial channel and temporal pulse restricted system, which can detect the target more effectively and implement more easily for the airborne phased array radar.

Traditional space-time (ST) adaptive processing (STAP) theory is based on the assumption of narrowband or “zero-bandwidth,” where the decorrelation within the ST snapshot is ignored. However, with radar bandwidths increasing, this assumption becomes invalid due to the deteriorated decorrelation of the received signals within the ST snapshot. The decorrelation directly causes the dispersion of the received signals in both spatial and temporal domains, leading to the spreading of the clutter spectrum in the 2-D frequency (Doppler-spatial frequency) domain. With the spreading of the clutter spectrum, the clutter suppression notch in the traditional STAP filters is widened, resulting in a relative poor ability to detect slow-moving targets. In this article, we focus on the clutter suppression for wideband radar STAP. A generalized signal model of the ground clutter is first established for the wideband array radar. Using this outcome, we analyze the influence of bandwidth on the characteristics of the ground clutter and quantitatively describe the 2-D spreading of the ground clutter on the Doppler-spatial frequency plane. Moreover, the model of clutter covariance matrix for wideband STAP (W-STAP) is established. Finally, a 2-D keystone transform (KT) algorithm, referred to as ST KT (ST-KT), is proposed to eliminate the spreading of the ground clutter in the 2-D frequency domain caused by increasing bandwidths. Simulation results are employed to validate the theoretical analysis and verify the overperformance of the ST-KT based W-STAP method in terms of the output signal-to-clutter-plus-noise ratio (SCNR) of moving targets.

A reduced-dimension space time adaptive processing (STAP) for airborne multiple-input multiple-output (MIMO) radar based on three iterations is proposed. The optimum filter for MIMO-STAP is described as a separable filter, and the optimal weight vector in high dimension can be iteratively solved by three lower dimension weight vectors. Consequently, the quite high sample support and computational complexity in optimal MIMO-STAP can be efficiently reduced. For short data records, the proposed method can achieve better clutter suppression performance. Simulation results demonstrate the effectiveness of the proposed method.

In this article, the problem of the transmit beamspace (TB) matrix design in multiple-input multiple-output (MIMO) radar is considered. To reduce the computational burden and to focus the energy within optimal spatial sector, a joint design method of the TB matrix and a reduced-dimension space-time adaptive processing (STAP) filter is proposed based on the maximum signal-to-clutter-plus-noise ratio (SCNR). Firstly, the signal model of the reduced-dimension STAP for TB-based MIMO radar is established. Then, using the maximum SCNR as the design metric, the joint design model of the TB matrix and the reduced-dimension STAP filter is presented. Furthermore, the cyclic optimisation method is exploited to deal with the non-convex joint design problem with the energy constraint. Finally, simulation experiments demonstrate the joint design method of the TB matrix and the STAP filter not only has better output SCNR performance but also owns lower computational burden when compared with the other existing methods.

Space-time adaptive monopulse processing for airborne radar in non-homogeneous environments

The nonhomogeneous clutter is one of the biggest challenge for ocean remote sensing radar system such as high frequency hybrid sky-surface wave radar. Space-time adaptive processing (STAP) is a powerful method to suppress the clutter but the training samples in adjacent range gates are not always independent and identically distributed with the cell under test in the heterogeneous environment. So the estimation of the clutter covariance matrix will be inaccurate and degrade the STAP performance. In this paper, a novel training sample selection method based on information geometric means is proposed to choose the more homogeneous secondary data containing the precise clutter information of cell under test. The simulation results of selection performance is conducted to show the advantages of the Information geometric mean based estimators compared with the existing estimators. Combined with joint domain localized STAP, the effectiveness of the proposed method is verified by experimental data. The results show the proposed method outperforms conventional STAP method and the nonhomogeneous clutter can be greatly suppressed.

Reducing the size, weight, and power (SWAP) of airborne radar systems improves efficiency and decreases operational cost. Platform SWAP requirements are directly related to the complexity of algorithms used to process the received signal. Several reduced dimension space-time adaptive processing (RD-STAP) algorithms, which significantly decrease computations over traditional STAP, have been shown to minimally impact GMTI performance in homogeneous clutter. In both heterogeneous clutter and dense target environments, training with data whose characteristics match those of the cell under test may be required to maintain acceptable performance; however, selecting appropriate training data requires additional computations that increase SWAP. This paper identifies and quantifies trades between performance and computations for several RD-STAP algorithms and training methods in challenging signal environments.

This research presents two new space-time adaptive processing (STAP) algorithms; a two-dimensional non-statistical method and a hybridisation of this approach with statistically based methods. The non-statistical algorithm developed here allows filtering of uncorrelated interference, such as discrete interferers, within the range cell of interest. However, the performance of these algorithms in homogeneous correlated interference scenarios is inherently inferior to traditional statistical STAP algorithms. The proposed hybrid algorithm alleviates this drawback by implementing a second stage of statistical adaptive processing. This paper illustrates the advantages of using a two stage adaptive process to combine the direct data domain and statistical algorithms. The work presented in this paper brings together two different aspects of STAP research: statistical and direct data domain processing. In doing so, this research fulfils an important need in the context of practical STAP processing.

Multistatic moving target detection in unknown coloured Gaussian interference

Space-time adaptive processing (STAP) is an effective technology in clutter suppression and moving target detection for airborne radar. Because airborne radar moves at a constant acceleration, and there is a lack of independent and identically distributed (IID) training samples caused by the heterogeneous environment, using the conventional STAP methods directly cannot ensure a good performance. To eliminate these effects and improve the performance of clutter suppression, a STAP method based on a sparse Bayesian learning (SBL) framework for uniform acceleration radar is proposed here. This paper introduces the signal model of the uniform acceleration radar. To promote the sparsity, a generalized double Pareto (GDP) prior is introduced into our method, and the estimation of hyper parameters via expectation maximization (EM) is given. The effectiveness of the proposed method is demonstrated by simulations.

In high-frequency surface wave radar (HFSWR) systems, clutter is a common phenomenon that causes objects to be submerged. Space-time adaptive processing (STAP), which uses two-dimensional data to increase the degrees of freedom, has recently become a crucial tool for clutter suppression in advanced HFSWR systems. However, in STAP, the pattern is distorted if a clutter component is contained in the main lobe, which leads to errors in estimating the target angle and Doppler frequency. To solve the main-lobe distortion problem, this study developed a clutter-suppression method based on beam reshaping (BR). In this method, clutter components were estimated and maximally suppressed in the side lobe while ensuring that the main lobe remained intact. The results of the proposed algorithm were evaluated by comparison with those of standard STAP and sparse-representation STAP (SR-STAP). Among the tested algorithms, the proposed BR algorithm had the best suppression performance and the most accurate main-lobe peak response, thereby preserving the target angle and Doppler frequency information. The BR algorithm can assist with target detection and tracking despite a background with ionospheric clutter.

Space-time adaptive processing (STAP) plays an essential role in clutter suppression and moving target detection in airborne radar systems. The main difficulty is that independent and identically distributed (i.i.d) training samples may not be sufficient to guarantee the performance in the heterogeneous clutter environment. Currently, most sparse recovery/representation (SR) techniques to reduce the requirement of training samples still suffer from high computational complexities. To remedy this problem, a fast group sparse Bayesian learning approach is proposed. Instead of employing all the dictionary atoms, the proposed algorithm identifies the support space of the data and then employs the support space in the sparse Bayesian learning (SBL) algorithm. Moreover, to extend the modified hierarchical model, which can only apply to real-valued signals, the real and imaginary components of the complex-valued signals are treated as two independent real-valued variables. The efficiency of the proposed algorithm is demonstrated both with the simulated and measured data.

The performance of space–time adaptive processing (STAP) may degrade significantly when some of the training samples are contaminated by the signal-like components (outliers) in nonhomogeneous clutter environments. To remove the training samples contaminated by outliers in nonhomogeneous clutter environments, a robust nonhomogeneous training samples detection method using the sparse-recovery (SR) with knowledge-aided (KA) is proposed. First, the reduced-dimension (RD) overcomplete spatial–temporal steering dictionary is designed with the prior knowledge of system parameters and the possible target region. Then, the clutter covariance matrix (CCM) of cell under test is efficiently estimated using a modified focal underdetermined system solver (FOCUSS) algorithm, where a RD overcomplete spatial–temporal steering dictionary is applied. Third, the proposed statistics are formed by combining the estimated CCM with the generalized inner products (GIP) method, and the contaminated training samples can be detected and removed. Finally, several simulation results validate the effectiveness of the proposed KA-SR-GIP method.

The ground moving-target indication (GMTI) technique can detect civil and military moving targets, which means that this technique has received much attention. Strong clutter background suppression is one of the critical problems in this application. However, the detection performance in heterogeneous environment can be degraded due to the inaccurate estimation of the clutter covariance matrix (CCM). In this paper, we propose a robust GMTI method using a spaceborne dual-platform synthetic aperture radar (SAR) system, which can obtain highly accurate CCM in nonuniform clutter. Firstly, the accurate CCM is estimated based on the SAR image obtained by the former platform. Then, space–time adaptive processing (STAP) is carried out using the obtained the CCM. Finally, the detection threshold is set according to the estimated CCM and detection is executed accurately. Compared with the traditional CCM estimation method in STAP using the clutter nearby the cell under test, this method directly estimates the CCM using the clutter of the cell under test, which can avoid CCM estimation mistakes in heterogeneous clutter environment. The clutter can be whitened and depressed more effectively. Additionally, with the accurate threshold acquired from the CCM, the detection probability can be effectively improved under a certain false-alarm criterion. Based on simulation data, GMTI experiments in a heterogeneous environment such as clutter with strong pollution, junction zone of hot and cold clutter, and clutter with nonuniform power are carried out; the results show that the moving targets can be effectively detected with the proposed method.