Reducing Error Rates for Iris Image using higher Contrast in Normalization process

Iris recognition system is one of the most predominant methods used for personal identification in the modern days. Low quality iris image such as low contrast and poor illumination presents a setback for iris recognition as the acceptance or rejection rates of verified user depend solely on the image quality. This paper presents a new method for improving histogram equalization technique to obtained high contrast in normalization process thereby reducing False Rejection Rate (FRR) and False Acceptance Rate (FAR). The proposed technique is developed using C++ and tested using four datasets CASIA, UBIRIS, MMU and ICE 2005. The experimental results show that the proposed technique has an accuracy of 95%, as compared to the existing techniques: CLAHE, AHE, MAHE and HE which have an accuracy of a 93.0, 85.7, 92.8 and 90.71% respectively. Hence it can be concluded that the proposed technique is a better enhancement technique compared to the existing techniques for image enhancement.

Problem statement: In any real time biometric system processing speed and recognition time are crucial parameters. Reducing processing time involves many parameters like normalization, FAR, FRR, management of eyelid and eyelash occlusions, size of signature etc. Normalization consumes substantial amount of time of the system. This study contributes for improved iris recognition system with reduced processing time, False Acceptance Rate (FAR) and False Rejection Rate (FRR). Approach: To improve system performance and reliability of a biometric system. It avoided the iris normalization process used traditionally in iris recognition systems. The technique proposed here used different masks to filter out iris image from an eye. Comparative study of different masks was done and optimized mask is proposed. The experiment was carried on CASIA database consisting of 756 iris images of 108 persons. Each person contributes seven images of eye (108×7 = 756) images in the database. Results: In the proposed method: (1) Normalization step is avoided; (2) Computational time is reduced by 0.3342 sec; (3) Iris signature size is reduced; (4) Improved performance parameters. (With reduced feature size, proposed method achieves 99.4866% accuracy, 0.0069% FAR, 1.0198% FRR and significant increase in speed of the system). Conclusion: Iris signature proposed was comparatively small just of 1×24 size. Though Daugman’s method gives best accuracy of 99.90% but the iris signature length used by that algorithm is comparatively very high that is 1×2048 phase vector. Also Daugman has used phase information in signature formation. Our method gives a accuracy of 99.474% with a signature of comparatively very small length. This has definitely contributed to improve the speed.

This chapter aims to enhance the security of textual passwords by adding a new layer that involves an individual's typing rhythm without requiring additional devices. It discusses authentication methods and develops a textual password authentication system, which takes advantage of the fact that every user has a distinct way of typing. Twenty participants, including novice and expert users, assessed the proposed system. The measuring metrics used were the False Acceptance Rate (FAR) and False Rejection Rate (FRR). The flight time and typing rhythm were the biometric identification template. The results indicated low false rejection and acceptance rates, with the initial session registering 0.0 FRR and 0.1 FAR. Two weeks later, the second session recorded 0.25 FRR and 0.0 FAR. Using this model, users do not need to select a complex password they might forget. Instead, they can utilize a good rhythm different from their natural typing rhythm, making it challenging to guess.

We examined the false acceptance rate (FAR) and false rejection rate (FRR) of varying precision verification experimental designs. Analysis of variance was applied to derive the subcomponents of imprecision (ie, repeatability, between-run, between-day imprecision) for complex matrix experimental designs (day × run × replicate; day × run). For simple nonmatrix designs (1 day × multiple replicates or multiday × 1 replicate), ordinary standard deviations were calculated. The FAR and FRR in these different scenarios were estimated. The FRR increased as more samples were included in the precision experiment. The application of an upper verification limit, which seeks to cap FRR at 5% for multiple experiments, significantly increased the FAR. The FRR decreases as the observed imprecision increases relative to the claimed imprecision and when a greater number of days, runs, or replicates are included in the verification design. Increasing the number or days, runs, or replicates also reduces the FAR for between-day imprecision and repeatability. Design of verification experiments should incorporate the local availability of resources and analytical expertise. The largest imprecision component should be targeted with a greater number of measurements. Consideration of both FAR and FRR should be given when committing a platform into service.

Image feature extraction is one of the basic works for biometric analysis. This paper presents the novel concept of application of ridgelets for iris recognition systems. Ridgelet transforms are the combination of Radon transforms and Wavelet transforms. They are suitable for extracting the abundantly present textural data that is in an iris. The technique proposed here uses the ridgelets to form an iris signature and to represent the iris. This paper contributes towards creating an improved iris recognition system. There is a reduction in the feature vector size, which is 1X4 in size. The False Acceptance Rate (FAR) and False Rejection Rate (FRR) were also reduced and the accuracy increased. The proposed method also avoids the iris normalization process that is traditionally used in iris recognition systems. Experimental results indicate that the proposed method achieves an accuracy of 99.82%, 0.1309% FAR, and 0.0434% FRR.

"This paper explores the application of neural networks in multimodal biometric authentication systems, emphasizing the integration of multiple biometric modalities to enhance security, accuracy, and robustness against various attacks. Traditional authentication methods, such as passwords and single-modal biometrics, often suffer from vulnerabilities, including spoofing, environmental factors, and data breaches. To address these challenges, multimodal authentication systems combine several biometric traits, such as facial recognition, fingerprint scanning, voice recognition, and keystroke dynamics, to achieve higher reliability and resistance to security threats. The study provides an overview of public datasets used for training neural network-based biometric authentication models, including VoxCeleb, RAVDESS, MOBIO, and SDUMLA-HMT. These datasets contain diverse biometric information necessary for developing robust multimodal authentication systems. The paper evaluates the effectiveness of existing approaches using key performance metrics such as accuracy, false acceptance rate (FAR), false rejection rate (FRR), and area under the curve (AUC). Additionally, specialized metrics are considered, including failure to enroll rate (FTE), failure to acquire rate (FTA), and template stability (TS), which are crucial for real-world applications. The role of neural networks in multimodal biometric authentication is analyzed by examining state-of-the-art architectures, including convolutional neural networks (CNNs) and deep learning-based feature fusion methods. Various fusion levels—feature-level, score-level, and decision-level—are discussed to determine the optimal integration strategy for improving authentication performance. The results indicate that multimodal systems significantly outperform unimodal authentication methods by reducing vulnerability to spoofing and environmental variations. Experimental findings suggest that integrating multiple biometric traits enhances the system’s adaptability to dynamic conditions, reducing both false acceptance and false rejection rates. Despite these advantages, several challenges remain, including computational complexity, data privacy concerns, and the need for real-time processing capabilities. Future research should focus on optimizing multimodal fusion techniques, improving generalization across different datasets, and enhancing the security of biometric templates against adversarial attacks. Additionally, developing lightweight neural network architectures suitable for mobile and embedded systems is essential for the practical deployment of multimodal authentication technologies"

Fingerprint recognition has widespread security applications owing to its uniqueness, permanence, and simplicity in capture. However, conventional fingerprint authentication systems face high false acceptance and rejection rates and susceptibility to spoofing attacks. To address these issues, this study proposes a deep learning-based fingerprint authentication system using a Convolutional Neural Network (CNN) with five convolution layers to derive robust spatial features. The model was trained and cross-validated on the SOCOFing dataset with regularization and data augmentation to enhance generalization and spoof resistance. Experimental results show that the proposed CNN achieved a training accuracy of 99.10% with a loss of 0.0223 and a validation accuracy of 98.89% with a loss of 0.0114. Moreover, the model maintained a low false acceptance rate of 0.33% and false rejection rate of 0.25%, demonstrating its efficacy and credibility for secure and real-time biometric authentication. A rigorous comparison with conventional CNN models and DCCN architectures confirmed that the proposed model provides higher accuracy, lower computational cost, and stronger resistance to spoofing attacks. These findings indicate that the proposed system successfully addresses existing limitations and offers a practical, scalable, and reliable solution for fingerprint verification using deep CNN architectures.

In this study, a hybrid security system is proposed. The proposed system is composed of two subsystems namely iris recognition system (IRS) and speaker recognition system (SRS). Pre-processing, feature extraction and feature matching are the main steps of these systems. In IRS subsystem, Gaussian filter, Canny edge detector, Hough transform, and histogram equalization is performed for pre-processing, respectively. After that, by applying 4-level Discrete Wavelet Transform (DWT) to pure iris image, the iris image is decomposed into four sub-bands (LL4, LH4, HL4 and HH4). In order to extract the feature vector from iris pattern, the LH4, HL4 and HH4 sub-bands (matrices) are merged into one matrix. Finally the matrix is transformed in vector to obtain the feature vector of iris image. For SRS subsystem, the pre-processing step includes spectral arrangement, silence part removing and band limitation operations. After pre-processing, frame blocking and windowing are applied to the long-term speech samples and then Fast Fourier Transform (FFT) is performed for the each short-term speech segments (frames). Finally, the Mel Frequency Cepstral Coefficients (MFCC) technique is performed in order to obtain feature vector of the speech. The feature matching step of both IRS and SRS is implemented with Dynamic Time Warping (DTW) which is an efficient algorithm to measure the distance between two vectors. According to the DTW results, the false acceptance rate (FAR) is zero and false rejecting rate (FRR) is about 4 % for the proposed hybrid system.

The problem of speaker recognition from a given set of speakers for any language and any context is considered. A database of Russian numerals that contains speech segments from 216 men and 177 women, each of whom spoke from 400 to 800 words, is used for recognition. Speech has been recorded on different types of microphones in different rooms at the natural noise level. Recognition is based on solutions of the inverse problem of finding the voice excitation pulse shape for each pitch period by the known speech segment. The pulse shape is defined as the inverse Fourier transform of the regularized ratio of speech signal spectra at the intervals of the open and closed glottis. Recognition is carried out by ten parameters: the pitch period, the open glottis interval duration, times when the source amplitude is maximum, minimum, or zero, the amplitude ratio for the minimum and maximum source pulses, three decomposition ratios of the source function by the principal component method, and the vowel duration. In such a recognition procedure, in the case of the utterance of a word that contains one vowel, the false reject rate (FRR) for men is 1.7---5.4%, and the false acceptance rate (FAR) is 5.4---7.1%. For women FRR = 2---5.2% and FAR = 5.2---6.3%. The recognition error decreases with an increasing number of vowels in the speech signal. At 10 vowels, for men FRR = 0.05---0.2% and FAR = 0.07---0.8%, and for women FRR = 0.09---0.2% and FAR = 0.17---2.1%.

Among all biometric technologies, iris recognition is the most accurate and high confidence authentication system. Due to the limitations in PCA-based system, modified principal component analysis (PCA)-based feature extraction is proposed in iris recognition system. In the proposed system, features are extracted using Gaussian kernel PCA (GKPCA) and classified using support vector machine (SVM). GKPCA and SVM algorithms are evaluated using CASIA V3 iris database. The performances are compared with the existing PCA-based system. The proposed system achieves 96.67% of accuracy for 256 features using GKPCA linear SVM. False acceptance rate (FAR) and false rejection rate (FRR) are 0 and 3 respectively for linear SVM. The results show that the proposed system performs accurate localisation of patterns even in non-ideal conditions.

The cumulative match curve (CMC) is used as a measure of 1: m identification system performance. It judges the ranking capabilities of an identification system. The receiver operating characteristic curve (ROC curve) of a verification system, on the other hand, expresses the quality of a 1:1 matcher. The ROC plots the false accept rate (FAR) of a 1:1 matcher versus the false reject rate (FRR) of the matcher. We show that the CMC is also related to the FAR and FRR of a 1:1 matcher, i.e., the matcher that is used to rank the candidates by sorting the scores. This has as a consequence that when a 1:1 matcher is used for identification, that is, for sorting match scores from high to low, the CMC does not offer any additional information beyond the FAR and FRR curves. The CMC is just another way of displaying the data and can be computed from the FAR and FRR.

Problem statement: We proposed a new method for feature extraction of an Iris image for personal identification system. Approach: This study purposed a new approach to extract the features of region of interest using the wavelet transform. The extracted Iris region could be normalizing into a rectangular block of fixed dimensions. The Gabor wavelet transform techniques had been applied on the data set to get feature vectors of an iris used for recognition. Results: Two Iris templates used for testing. The system performance score results in a false accept and false reject rate. Conclusion: The performance of the system Efficient Feature Extrac tion Methodology Using wavelet transform for the development of personal identification system using iris biometrics can be increased by training the more feature vectors of an extracted Iris images.

In recent years, with the increasing demands of security in our networked society, biometric systems for user verification are becoming more popular. Iris recognition system is a new technology for user verification. In this paper, the CASIA iris database is used for individual user’s verification by using support vector machines (SVMs) which based on the analysis of iris code as feature extraction is discussed. This feature is then used to recognize authentic users and to reject impostors. Support Vector Machines (SVMs) technique was used for the classification process. The proposed method is evaluated based upon False Rejection Rate (FRR) and False Acceptance Rate (FAR) and the experimental result show that this technique produces good performance.

This method describes the advantages of a signature verification or any other biometric methodology having multiple tries. Traditional verification techniques acquire a test sample and compare with a model and a decision is made as to whether the test sample is genuine or a forgery. While it is clear that allowing a second try will reduce the false rejects, it will also increase the false accepts. However, from our experiments, the increase in false accepts was small compared to the dramatic reduction in false rejects. At the 1% false rejection (FR) rate, the addition of the second try reduced the false acceptance (FA) rate from 4.7% to 1.3%. So, in applications where very low FR is required, allowing the signer a second try appears to be a good option.

Space object detection, as the foundation for ensuring the long-term safe and stable operation of spacecraft, is widely applied in a variety of close-proximity tasks such as non-cooperative target monitoring, space debris avoidance, and spacecraft mission planning. To strengthen the detection capabilities for non-cooperative spacecraft and space debris, a method based on You Only Look Once Version 11 (YOLO11) is proposed in this paper. On the one hand, to tackle the issues of noise and low contrast in images captured by spacecraft, bilateral filtering is applied to remove noise while preserving edge and texture details effectively, and image contrast is enhanced using the contrast-limited adaptive histogram equalization (CLAHE) technique. On the other hand, to address the challenge of small object detection in spacecraft, loss-guided online data augmentation is proposed, along with improvements to the YOLO11 network architecture, to boost detection capabilities for small objects. The experimental results show that the proposed method achieved 99.0% mAP50 (mean Average Precision with an Intersection over Union threshold of 0.50) and 92.6% mAP50-95 on the SPARK-2022 dataset, significantly outperforming the YOLO11 baseline, thereby validating the effectiveness of the proposed method.