Region Duplication Forgery Detection Technique Based on SURF and HAC

Copy-Move forgery is the most widely used way to tamper image for creating the forged images. The meaning of the photograph is changed by forging or concealing the images. Copy move is a very common technique for image forgery; tools used for retouching are applied along with it making naked eyes difficult to detect the copy move. Hence, the verification of authenticity and integrity is very essential of the image. The copy-move forgery detection can be divided into two heads a) Block based method b) Keypoint based. In the case of blocked based method, the method is exceptionally good in detecting the forged regions with higher accuracy but uses extremely high power of computation. Speed up Robust Feature (SURF) and Scale Invariant Feature Transform (SIFT) are invariant with respect to geometrical and illumination transform. In this paper we review the different keypoint approach which is a better approach or alternate to block-based approach due to invariancy property of SURF and SIFT. The keypoint based copy-move forgery detection schemes involve, identifying and relating the localized features of the images using the algorithms like SIFT and SURF.

Speeded Up Robust Features (SURF) algorithm is a fast robust local feature matching method. Because of the advantage of invariance of scale and rotation, the SURF algorithm has been widely used in the image registration. However, due to the acquired angle, imaging mode, different resolution, SURF algorithm becomes quite difficult in the image registration. This paper presents a normalized SURF algorithm which can reduce the impact of hue difference between remote sensing images. Combined with the idea of two-way matching, the normalized SURF is able to improve the accuracy of the image registration. The experimental results show the normalized SURF algorithm can keep greater accuracy and relatively higher speed of matching than the original SURF algorithm.

위성 SAR 영상의 활용이 증가하면서 영상의 해석 및 융합을 위한 정밀 기하보정에 대한 필요성이 높아지고 있다. 특히 광역감시 목적으로 활용되기 위해 서로 다른 해상도를 갖는 SAR 영상간 정보융합도 활발해지고 있다. 일반적으로 SAR 영상의 기하보정은 위성의 궤도 및 자세정보를 활용하여 수행할 수 있지만 SAR 센서의 궤도 및 시스템 오차, 대상지형 특성에 의한 왜곡으로 인해 추가적인 보정이 필요하게 된다. SAR 영상을 통한 변화탐지나 타 영상과의 융합에 적용하기 위해서는 기하 오차 보정이 반드시 선행되어야 한다. 이를 위해 다수의 지상 기준점을 선정하고 이를 포함하는 기준 영상과 비교하여 원본 영상에서 대응점을 찾는 방식으로 정밀 기하보정을 수행할 수 있다. Speeded Up Robust Feature (SURF) 기법은 쉽고 빠르게 영상의 기준점을 찾을 수 있지만 상대적으로 해상도가 낮고 스펙클 잡음에 영향을 받는 SAR 영상에서는 활용하기가 어렵다고 알려져 있다. 본 논문에서는 SURF 기법을 위성 SAR 영상에 적용할 때 발생할 수 있는 오차를 추출하고 영상 특성에 따른 성능 변화를 분석하였다. SURF 알고리즘의 적용이 가능한 입력 변수의 적정 범위를 제시하고 그에 따른 영상 정합의 오차를 분석하여 중저해상도의 위성 SAR 영상에 대해서도 SURF 기법을 통한 기하 보정 및 영상 정합이 적용될 수 있음을 검증하였다. As applications of spaceborne SAR imagery are extended, there are increased demands for accurate registrations for better understanding and fusion of radar images. It becomes common to adopt multi-resolution SAR images to apply for wide area reconnaissance. Geometric correction of the SAR images can be performed by using satellite orbit and attitude information. However, the inherent errors of the SAR sensor's attitude and ground geographical data tend to cause geometric errors in the produced SAR image. These errors should be corrected when the SAR images are applied for multi-temporal analysis, change detection applications and image fusion with other sensor images. The undesirable ground registration errors can be corrected with respect to the true ground control points in order to produce complete SAR products. Speeded Up Robust Feature (SURF) technique is an efficient algorithm to extract ground control points from images but is considered to be inappropriate to apply to SAR images due to high speckle noises. In this paper, an attempt is made to apply SURF algorithm to SAR images for image registration and fusion. Matched points are extracted with respect to the varying parameters of Hessian and SURF matching thresholds, and the performance is analyzed by measuring the imaging matching accuracies. A number of performance measures concerning image registration are suggested to validate the use of SURF for spaceborne SAR images. Various simulations methodologies are suggested the validate the use of SURF for the geometric correction and image registrations and it is shown that a good choice of input parameters to the SURF algorithm should be made to apply for the spaceborne SAR images of moderate resolutions.

Digital images have become very important in our daily lives and some other important areas such as medicine, journalism and it can be also used as forensic evidence. However, the simplicity of using digital images with freely available software tools makes the authenticity of images questionable. The most common image forgery type is copy move forgery because it can be done easily but the detection of this type of forgery is hard. Various approaches are proposed in literature to detection of copy move forgery, but lots of them is not satisfy result especially smooth regions are used to hide objects. And lots of works use experience parameters values so sometimes they cannot detect forgery operations. To solve these problems we proposed an optimized keypoint based copy move forgery detection methods based on Speeded-Up Robust Features (SURF) algorithm and Particle Swarm Optimization (PSO). Experimental results show that the proposed method has good performance even under post processing and preprocessing attacks (such as blurring, noise addition, rotation, JPEG compression).

How to construct compact and powerful feature descriptors is an important research subject in the fields of machine vision and pattern recognition. After the research on SURF, the issue that the Haar descriptor of Speeded Up Robust Features(SURF) algorithm can not make full use of the information around the neighborhood of the feature points is found. To resolve the issue, this paper proposes a improved SURF based on the original SURF algorithm. The algorithm makes full use of the information around the neighborhood of the sub-block by masking with 3*3 window templates and then constructs the descriptor which can obtain better discriminative power. In addition, aimed at the primary direction of the SURF depends too much on the local region, the paper improves the confirmation of the primary direction. At last, this paper combines the nearest distance and the ratio between the nearest distance and the second nearest distance to match the interest points. The experiment shows that the algorithm proposed in this paper has better discriminative power, and the face recognition rate is enhanced.

In recent years, keypoints-based features, such as speeded up robust features (SURF), capture the attention of researchers in the area of image copy-move forgery detection. They are fast to compute and are quite robust to most inter-processing and post-processing operations. However, they will fail to detect the forgery if not enough keypoints are detected, and that is the case when the forgery size is small. A small size forgery is possible if the object is far away from the camera, or if the image is scaled down as a post-processing step. In this paper, our focus is on detecting forgeries of small size using an improved SURF based copy-move forgery detection (CMFD) method. Our method improves keypoints detection by preprocessing the image using a single image super resolution (SISR) algorithm. The proposed approach has been evaluated and compared against original SURF through a comprehensive set of experiments using a dataset of small size forgeries. Experimental results indicate that our method outperforms SURF especially when the forgery size is small.

This paper presents an efficient feature detection algorithm based on the classical SURF (Speeded Up Robust Feature) detector. The image features are represented and scored with respect to its local symmetry property. The local symmetry has natural properties of scale and transformation invariants, and also insensitive to illumination change and local noise. By the proposed feature descriptor, the calculation of 64-dimensional vectors in SURF algorithm can be reduced to 16-dimensional vector respectively. The local symmetry score is defined as the sum of minimum distance between each feature point and its neighboring points in an image based on the image intensities. The algorithm is experimented with some real images and the results are compared with the original SURF algorithm to show its improvement.

Feature point extraction and matching are the key modules in the front-end of visual simultaneous localization and mapping (SLAM), which determines the accuracy of locating and map Nbuilding robots. To obtain a good performance, the image extraction algorithm being applied should have high efficiency and robustness to the changes of the surrounding environment. In this paper, three widely used feature extraction algorithms, namely Scale-invariant feature transform (SIFT), speed up robust features (SURF) and oriented FAST, and rotated BRIEF (ORB), are studied. The basic concepts and details of the three algorithms are introduced. Then the execution time of the three algorithms is compared to evaluate their efficiency. Meanwhile, the key points matching rate of the three algorithms are compared under various transformations and distortions. The experiment results show that ORB has higher efficiency than SIFT and SURF. However, SIFT has better robustness to image rotation, illumination change, scaling transformation, Gaussian noise and salt-and-pepper noise. In addition, the performance of the ORB-SLAM system is tested on different datasets. It has great ability in camera trajectory estimation and map building and therefore is suitable for deploying in industry.

Purpose – To build a persistent map with visual landmarks is one of the most important steps for implementing the visual simultaneous localization and mapping (SLAM). The corner detector is a common method utilized to detect visual landmarks for constructing a map of the environment. However, due to the scale-variant characteristic of corner detection, extensive computational cost is needed to recover the scale and orientation of corner features in SLAM tasks. The purpose of this paper is to build the map using a local invariant feature detector, namely speeded-up robust features (SURF), to detect scale- and orientation-invariant features as well as provide a robust representation of visual landmarks for SLAM. Design/methodology/approach – SURF are scale- and orientation-invariant features which have higher repeatability than that obtained by other detection methods. Furthermore, SURF algorithms have better processing speed than other scale-invariant detection method. The procedures of detection, description and matching of regular SURF algorithms are modified in this paper in order to provide a robust representation of visual landmarks in SLAM. The sparse representation is also used to describe the environmental map and to reduce the computational complexity in state estimation using extended Kalman filter (EKF). Furthermore, the effective procedures of data association and map management for SURF features in SLAM are also designed to improve the accuracy of robot state estimation. Findings – Experimental works were carried out on an actual system with binocular vision sensors to prove the feasibility and effectiveness of the proposed algorithms. EKF SLAM with the modified SURF algorithms was applied in the experiments including the evaluation of accurate state estimation as well as the implementation of large-area SLAM. The performance of the modified SURF algorithms was compared with those obtained by regular SURF algorithms. The results show that the SURF with less-dimensional descriptors is the most suitable representation of visual landmarks. Meanwhile, the integrated system is successfully validated to fulfill the capabilities of visual SLAM system. Originality/value – The contribution of this paper is the novel approach to overcome the problem of recovering the scale and orientation of visual landmarks in SLAM tasks. This research also extends the usability of local invariant feature detectors in SLAM tasks by utilizing its robust representation of visual landmarks. Furthermore, data association and map management designed for SURF-based mapping in this paper also give another perspective for improving the robustness of SLAM systems.

This paper proposes a feature-based image registering technique for remote sensing satellite images. The system is composed of multiple steps in which various image processing techniques are used. Speed-up Robust Features (SURF) and Scale Invariant Feature Transform (SIFT) can be mounted alternatively to detect and define features on images. We also address the issues of registering multi-spectral and multi-temporal images. The effectiveness of the proposed technique has been studied by registering partially overlapping satellite mosaic images of the Marmara Sea. The images were captured by the recently-launched LandSat-8 satellite.

In order to improve the speed of stitching and information extraction of remote sensing images, based on the UAV (Unmanned Aerial Vehicle) image stitching algorithm, this paper proposes a UAV image matching method based on the combination of SURF (Speeded Up Robust Features) and MASC (M-Estimate Sample Consensus) algorithm. the SURF algorithm is fast, and the MASC algorithm can effectively eliminate mismatch points and has high stability. In this paper, the SIFT (Scale-invariant feature transform) algorithm, SURF algorithm, SURF and RANSAC (Random Sample Consensus) algorithm as well as SURF and MASC algorithm are used to stitch the same two images and compare them respectively. The experimental results show that the lowest image matching error rate is only 2.13% and the matching time is 4.772670s when using the combination of SURF and MASC algorithm for image stitching, which has certain advantages.

영상에서 임의의 점에 대한 고유한 특징을 계산하는 알고리즘은 파노라마 영상의 제작, 스테레오 영상의 획득, 물체 인식, 이미지 분석 등에 다양하게 사용되는 중요한 요소이다. 일반적으로 어떤 점의 특징은 스칼라 형태가 아닌 벡터형태로 나타나게 되는데, 무수히 많은 특징 점들을 서로 비교하는 작업은 매우 많은 계산량을 요구한다. 본 연구에서는 영상의 특징점 계산에 SURF(speeded up robust features)를 이용하였고, 이미지로부터 추출된 특징을 PCA(principal component analysis)기법을 이용하여 벡터의 차원을 축소하여 연결리스트 자료구조에 정렬한 다음 특징을 비교하는 기법을 제안한다. 제안된 특징의 비교 방법을 적용할 경우 기존 방법의 매칭 정확도는 유지한 상태에서 계산시간을 줄일 수 있는 것을 실험을 통하여 확인하였다. Extracting unique features from an image is a fundamental issue when making panorama images, acquiring stereo images, recognizing objects and analyzing images. Generally, the task to compare features to other images requires much computing time because some features are formed as a vector which has many elements. In this paper, we present a method that compares features after reducing the feature dimension extracted from an image using PCA(principal component analysis) and sorting the features in a linked list. SURF(speeded up robust features) is used to describe image features. When the dimension reduction method is applied, we can reduce the computing time without decreasing the matching accuracy. The proposed method is proved to be fast and robust in experiments.

In recent years, digital image forgery detection has become an active research area due to the advancement of photo editing software. This paper focuses on passive forgery detection on images tampered using copy move technique, better known as Copy Move Forgery Detection (CMFD). A CMFD technique consisting of oriented Features from Accelerated Segment Test and rotated Binary Robust Independent Elementary Features (Oriented FAST and rotated BRIEF) as the feature extraction method and 2 Nearest Neighbour (2NN) with Hierarchical Agglomerative Clustering (HAC) as the feature matching method is proposed. Evaluation of the proposed CMFD technique was performed on images that underwent various geometrical attacks. With the proposed technique, an overall accuracy rate of 84.33% and 82.79% are obtained for evaluation carried out with images from the MICC-F600 and MICC-F2000 databases. Forgery detection achieved True Positive Rate of more than 91% for tampered images with object translation, different degree of rotation and enlargement.

A design of parallel architecture for image feature detection and description is proposed in this article. The major component of this architecture is a 2D cellular network composed of simple reprogrammable processors, enabling the Hessian Blob Detector and Haar Response Calculation, which are the most computing-intensive stage of the Speeded Up Robust Features (SURF) algorithm. Combining this 2D cellular network and dedicated hardware for SURF descriptors, this architecture achieves real-time image feature detection with minimal software in the host processor. A prototype FPGA implementation of the proposed architecture achieves 1318.9 GOPS general pixel processing @ 100 MHz clock and achieves up to 118 fps in VGA (640 × 480) image feature detection. The proposed architecture is stand-alone and scalable so it is easy to be migrated into VLSI implementation.

Feature description is a critical task in Augmented Reality Tracking. This article introduces a Convex Based Feature Descriptor (CBFD) system designed to withstand rotation, lighting, and blur variations while remaining computationally efficient. We have developed two filters capable of computing pixel intensity variations, followed by the covariance matrix of the polynomial to describe the features. The superiority of CBFD is validated through precision, recall, computation time, and feature location distance. Additionally, we provide a solution to determine the optimal block size for describing nonlinear regions, thereby enhancing resolution. The results demonstrate that CBFD achieves a average precision of 0.97 for the test image, outperforming Superpoint, Directional Intensified Tertiary Filtering (DITF), Binary Robust Independent Elementary Features (BRIEF), Binary Robust Invariant Scalable Keypoints (BRISK), Speeded Up Robust Features (SURF), and Scale Invariant Feature Transform (SIFT), which achieve scores of 0.95, 0.92, 0.72, 0.66, 0.63 and 0.50 respectively. Noteworthy is CBFD's recall value of 0.87 representing at the maximum of a 13.6% improvement over Superpoint, DITF, BRIEF, BRISK, SURF, and SIFT. Furthermore, the matching score for the test image is 0.975. The computation time for CBFD is 2.8 ms, which is at least 6.7% lower than that of other algorithms. Finally, the plot of location feature distance illustrates that CBFD exhibits minimal distance compared to DITF and Histogram of Oriented Gradients (HOG). These results highlight the speed and robustness of CBFD across various transformations.