Research on AGV cart control system based on fuzzy PID control

In the process of frozen food production, its refrigeration system is a typical large inertia, nonlinear, strongly coupled system, which is prone to large overshooting during operation, resulting in cost increase and quality control problems. This paper solves the problem of large overshoot in the digital PID control process by designing a fuzzy control, and designs a practical fuzzy controller so that the design method of the fuzzy PID controller can be realized in the simulation and actual control of the freezing system. A genetic algorithm optimization scheme is also designed for the fuzzy PID control system to optimize the fuzzy controller’s affiliation function, control rules, as well as proportionality and quantization factors, to enhance the model’s dynamic characteristics and robustness. Design of food quick-freezing simulation experiments and use the model in the refrigeration system control in practice, compare the performance of this model with the PID, fuzzy PID model, and found that the temperature difference set value of 4 ℃ and 3 ℃, respectively, the parameters of the traditional PID controller in the commissioning stage of the system after the end of the rectification to remain fixed, which makes the actual quality of the cooling water temperature difference control degradation. And the fuzzy genetic PID controller still has good control quality. In this paper, the model curve converges rapidly, the overshoot is only 3.9%, and the regulation time is only 450M seconds. The designed method of the study is feasible and has high industrial application value.

Fuzzy logic control based on the Takagi–Sugeno inference method has been applied for the yeast alcoholic fermentation running in a continuous-time biochemical reactor in this paper. A type-1 fuzzy PID controller was designed to temperature control in a biochemical reactor. The fuzzy PID controller was also designed using type-2 fuzzy sets. The advantage of the fuzzy control is that it can be used very successfully for control of strongly non-linear processes and processes that are difficult to model because of complicated reaction kinetics. Obtained simulation results confirm this fact. The disadvantage of the fuzzy control design lies in the time-consuming tuning of controllers. The subtractive clustering method was used to identify the rule base. This approach was chosen to minimize the number of rules of the designed fuzzy logic controllers and to simplify the fuzzy controller design. Simulation results confirm that fuzzy PID controllers can assure better performance than conventional PID controllers. Yeast alcoholic fermentation is an exothermic process and the cooling is necessary to maintain the optimal temperature in the reactor. Fuzzy PID control reduces coolant consumption in comparison with conventional PID control and so it assures energy-efficient control of continuous-time alcoholic fermentation. Using type-2 fuzzy sets in the fuzzy PID controller design is very promising as the type-2 fuzzy controller offers even better results than the type-1 fuzzy controller.

The paper is concerned with two types of fuzzy PID controllers, the rule-based fuzzy PID controller and the learning fuzzy PID controller. Initially, the development of the rule-based fuzzy PID controller is studied, and subsequently, the development of the learning fuzzy PID controller is outlined. For the rule-based fuzzy PID controller, the PID gains are firstly tuned using a conventional tuning method. The rule buffer of the rule-based fuzzy then readjusts the PID gains during the system operation. The learning fuzzy PID controller not only readjusts the PID gains, it also creates and updates the rules in the rule-buffer automatically during the application of the learning fuzzy PID controller to the process. The rule-based fuzzy PID controller and the learning fuzzy PID controller are both applied to a non-linear revolute-joint robot-arm for path tracking experiments. The results of the experiments for the rule-based fuzzy PID controller and the learning fuzzy controller are compared with a conventional PID controller in order to evaluate the results.

To improve tracking precision and increase the utilization of solar energy, the solar automatic tracking fuzzy PID control system based on ARM is designed. Embedded microcontroller 32-bit ARM processor is the core. A kind of mixed tracking mode is adopted, and it combines photoelectric tracking mode and solar trajectory tracking mode. In the solar trajectory tracking mode, the fuzzy PID segmented tracking control method is put forward. The fuzzy control and PID control are combined to control the system. If the system's angle deviation is large, PID control is adopted, else fuzzy control is adopted. And the controller can be automatically switched control mode according to the size of angle deviation. Matlab simulation results indicate that the solar automatic tracking system with fuzzy PID control has a good dynamic characteristics and high tracking accuracy, effectively improves the photoelectric conversion efficiency.

In CNC lathe servo feed system, many parameters are uncertain, so it is difficult to establish accurate mathematical model of the feed system, and parameters of conventional PID controller can not change the parameters to adjust with the controlled object. Fuzzy PID controller, which has the advantages of conventional PID control and fuzzy control, can solve these problems very well. So we can make it applied in CNC lathe servo feed system. This paper has made a simulation of fuzzy self-turning PID controller in the MATLAB environment. The simulation shows that the fuzzy self-turning PID controller has a better control capability and a higher stability, and it improved the servo feed system dynamic performance.

Fuzzy PID control is a process control technique combining the advantages of fuzzy logic and PID control. It maintains precise control over processes by combining fuzzy logic and proportional-integral-derivative (PID) controllers. With this method, it is possible to achieve higher levels of accuracy and stability in controlling process variables such as temperature, pressure, flow rate, and position. This makes Fuzzy PID control an ideal cordial application requiring precise process control. Fuzzy PID control uses the PID parameter tuning experience to make the fuzzy controller automatically tune its parameters, giving PID control a better control effect. In this paper, a fuzzy PID controller is designed to control the temperature of an electric boiler. The control effects of PID control, fuzzy control, and fuzzy PID control are compared by simulation analysis. The simulation results show that the unclear PID control effect is ideal and has a good application prospect.

Aiming at the limitation of traditional PID algorithm in the field of control, the fuzzy control theory and traditional PID control algorithm are combined to realize parameter self-tuning function, a fuzzy self-tuning PID controller, and this algorithm is analyzed in-depth study. It provides a new solution of modern industrial control problem that combining with fuzzy control technology and PID control technology. The FPGA has high integration, short development cycle, the characteristics of strong reusability; fuzzy PID controller has a good practical value and optimistic application prospect based on FPGA.

PID and fuzzy PID controller are applied into the wind turbine with nonlinear mathematical model. PID control has simple principle and its parameters setting are rather easy. Fuzzy control need not to establish the mathematical of the control system and has strong robustness. Fuzzy PID control is combined with PID control and fuzzy control. The advantages of fuzzy PID control are simple, easy in setting parameters and strong robustness. Fuzzy PID controller combines with closed-loop optimal fuzzy reasoning (COFR), which can effectively improve the robustness, when the robustness is special requirement. MATLAB software is used for simulations, results display that fuzzy PID controller which combines with COFR has better performances than PID controller when errors exist, especially robustness performance.

Because of the existing hybrid fuzzy PID controller does not perform, using electric hydraulic servo system application (SEHS). Therefore, when the system parameters change will require a new adjustment of PID controller variable. Therefore, a hybrid fuzzy and fuzzy self-tuning PID control was put forward. With this control scheme was divided into two parts, and the fuzzy controller and fuzzy self-tuning PID controller. Fuzzy controller is used to control the output of the system of the values of the system away from target value. We proved that the performance of the control scheme through the experiment of the motor speed control SEHS. The experimental results show that the proposed a hybrid fuzzy PID controller and fuzzy self-tuning effect is better than that of a hybrid fuzzy and PID controller.

Cascade fuzzy control of a tubular chemical reactor

Compared with type-2 fuzzy sets, the secondary membership degree of interval type-3 fuzzy sets is an interval rather than crisp value, which makes interval type-3 fuzzy sets can obtain more degree of freedoms. This article studies an interval type-3 fuzzy PID controller based on interval type-3 fuzz sets. The framework of interval type-3 fuzzy PID controller is identical with type-2 fuzzy PID controller, but it contains more adjustment controller parameters and its type reduction procedure is more complex. In this paper, type reduction of interval type-3 fuzzy sets is derived from general type-2 fuzzy sets represented by α-plane and a direct NT type reduction algorithm is applied. The control effects of interval type-3 fuzzy PID controller are firstly tested by 2 nonlinear plants, the simulation results show that interval type-3 fuzzy PID controller has better control performance indexes than PID controller, type-1 fuzzy PID controller, interval type-2 fuzzy PID controller and general type-2 fuzzy PID controller. Furthermore, the interval type-3 fuzzy PID controller will be applied in rated voltage control of solid oxide fuel cells (SOFC) power plant. The output voltage control of SOFC is quite challenging because of the strong nonlinearity, limited fuel flow, and rapid variation of the load disturbance. The simulation results demonstrate the advantages and robustness of proposed interval type-3 fuzzy PID controller.

This paper presents a fuzzy tracking control methodology for hydraulic control system of robot with generalized pulse modulation (GPCM) control by combining the merits of fuzzy logic and conventional linear control theory. The hydraulic control systems with GPCM control have the high nonlinearity and uncertain dynamics, therefore the simple linear or nonlinear differential equations cannot sufficiently represent corresponding practical system. The designed controllers based on the model cannot guarantee the good performance such as stability and robustness. A hybrid of fuzzy and PID control algorithm is proposed as the solution. The control algorithm is separated into two parts: fuzzy control and PID control. The fuzzy controller is used to control the piston when the piston is near the desired position, and PID controller is applied when the piston is far away the target position. The hybrid fuzzy PID is implemented on computer and applied to control the arms of hydraulic robot with GPCM control. The results from the experiments show that the proposed hybrid fuzzy PID control has good performance.

To achieve a better robustness and get a static response of a certain target missiles in longitudinal control, a mathematical model of target missiles is established. The uncontrolled trajectory, the predetermined trajectory and the requirements of the predetermined trajectory are analyzed next. Then the trajectory instruction angle is designed to ensure the stable flight of the target missiles system. To solve the problem that the PID controller cannot adjust parameters online and the output is easy to be disturbed by external noise, the fuzzy adaptive PID control is designed. It enhanced the robustness of the target missiles by fuzzy control, and also has a good response by using PID control. The simulation experiments show the fuzzy adaptive control system can track the predetermined trajectory rapidly and smoothly, and the static error and overshoot were significantly reduced. When the system are affected by noise, the fuzzy adaptive PID control can achieve a good robustness than traditional PID controller.

Accurate temperature regulation during the inductive heating of CFRP-wound circular tubes is crucial for maintaining the quality of composite formation. This process is marked by nonlinearity, time delays, and time-varying factors, rendering typical PID controllers inadequate for achieving high precision and rapid reaction. This work initially created a finite element model for the inductive heating of CFRP-wound tubes, utilizing the analogous electromagnetic-thermal properties of CFRP. The model clarifies the heat transport pathways and the spatial-temporal distribution features of the temperature field during induction heating. Thereafter, the Whale Optimization Algorithm (WOA) was utilized to optimize the essential parameters of the fuzzy PID controller. A compensation system for the temperature differential between the inner and outer surfaces was implemented to enhance control performance. Experimental results indicate that the WOA-Fuzzy-PID technique enhances temperature regulation accuracy, response speed, and disturbance rejection capability by roughly 63%, 57%, and 67%, respectively, when compared to traditional PID and fuzzy PID control systems. This greatly improves the overall control efficacy and resilience of the system. The proposed method significantly enhances temperature control accuracy during the heating process of CFRP-wound tubes and presents a novel strategy for the efficient production of composite materials.

In order to meet the needs of modern high-performance aircraft, the fuzzy PID control strategy was used to design the electromechanical actuator control system. This control strategy combines the advantages of fuzzy control and PID control, and has better adaptability to time-varying complex systems. The electromechanical actuator control system adopted the three-loop structure, and current loop, speed loop and position loop were built on the platform of MATLAB / Simulink. Considering that the discrete universe fuzzy PID control algorithm has good real-time performance with small online computation, the fuzzy PID controller in discrete universe was designed in the position loop and the system was simulated. The simulation results show that the dynamic and steady performance of discrete universe fuzzy PID control is better than that of traditional PID control, and it is more suitable for electromechanical actuator system.