Research on Dynamic Cost-Sensitive SVM Classifier based on Chaos Particle Swarm Optimization Algorithm

The problem with development of the support vector machine (SVM) classifiers using modified particle swarm optimization (PSO) algorithm and their ensembles has been considered. Solving this problem would allow fulfilling the high-precision data classification, especially Big Data classification, with the acceptable time expenditures. The modified PSO algorithm conducts a simultaneous search of the type of kernel functions, the parameters of the kernel function and the value of the regularization parameter for the SVM classifier. The idea of particles' «regeneration» served as the basis for the modified PSO algorithm. In the implementation of this algorithm, some particles change the type of their kernel function to the one which corresponds to the particle with the best value of the classification accuracy. The offered PSO algorithm allows reducing the time expenditures for the developed SVM classifiers, which is very important for Big Data classification problem. In most cases such SVM classifier provides the high quality of data classification. In exceptional cases the SVM ensembles based on the decorrelation maximization algorithm for the different strategies of the decision-making on the data classification and the majority vote rule can be used. Also, the two-level SVM classifier has been offered. This classifier works as the group of the SVM classifiers at the first level and as the SVM classifier on the base of the modified PSO algorithm at the second level. The results of experimental studies confirm the efficiency of the offered approaches for Big Data classification.

Study the basic theory and process of chaos particle swarm optimization (PSO) algorithm, improve the basic PSO algorithm by introducing the self-adaptive inertia weighting factor method. Construct the mathematical model of basic logistics scheduling to complete the simulation analysis experiments. Experiment results show that self-adaptive chaos particle swarm optimization algorithm is effective and feasible to solve the logistics scheduling model problem.

Fault diagnosis of sensor by chaos particle swarm optimization algorithm and support vector machine

An improved chaos particle swarm optimization (CPSO) algorithm is proposed on path planning for unmanned aerial vehicle (UAV) to overcome the inadequacy of particle swarm optimization (PSO) algorithm, which falls into local optimum easily and converges slowly in process with poor precision. Through the in-depth analysis of PSO algorithm, the chaos optimization (CO) algorithm principle is introduced into it based on the traditional update operations on the particles’ velocity and position; as a result, the diversity of particles is increased, the suboptimal search on path planning is avoided and the quickness accompanied with accuracy of convergence is improved. Combined with digital map for modeling the UAV’s flight environment, the 3-D path planning is achieved. As the simulation results demonstrated, this hybrid algorithm is superior to the traditional PSO algorithm on path searching, especially in the 3-D environment.

Power transformers are important parts in power supply systems. The stability, safety and reliability of transformers are especially important for electricity systems. This paper uses dissolved gas value as a feature parameter and creates a power transformer fault detection model by support vector machine classifier. In order to address the difficulty of determining the parameters for support vector machine, an optimization algorithm based on chaos particle swarm is proposed. The approach is not easy to be trapped into local optimum and improves population diversity and particle ergodicity. The experiment results prove that the support vector machine using chaos particle swarm optimization can achieve classification with higher precision and faster speed in power transformer fault diagnosis, compared to the support vector machine using traditional optimization algorithm.

Time-frequency methods for vibration-based gearbox faults detection have been considered the most efficient method. Among these methods, continuous wavelet transform (CWT) as one of the best time-frequency method has been used for both stationary and transitory signals. Some deficiencies of CWT are problem of overlapping and distortion ofsignals. In this condition, a large amount of redundant information exists so that it may cause false alarm or misinterpretation of the operator. In this paper a modified method called Exact Wavelet Analysis is used to minimize the effects of overlapping and distortion in case of gearbox faults. To implement exact wavelet analysis, Particle Swarm Optimization (PSO) algorithm has been used for this purpose. This method have been implemented for the acceleration signals from 2D acceleration sensor acquired by Advantech PCI-1710 card from a gearbox test setup in Amirkabir University of Technology. Gearbox has been considered in both healthy and chipped tooth gears conditions. Kernelized Support Vector Machine (SVM) with radial basis functions has used the extracted features from exact wavelet analysis for classification. The efficiency of this classifier is then evaluated with the other signals acquired from the setup test. The results show that in comparison of CWT, PSO Exact Wavelet Transform has better ability in feature extraction in price of more computational effort. In addition, PSO exact wavelet has better speed comparing to Genetic Algorithm (GA) exact wavelet in condition of equal population because of factoring mutation and crossover in PSO algorithm. SVM classifier with the extracted features in gearbox shows very good results and its ability has been proved.

The nodules and the multiple times larger non-nodules of the regions of interested(ROIs) in lung areas are achieved, that would lead to a serious imbalance on the sample data. Many scholars have proposed some algorithms to solve this problem. In this paper, in order to guarantee that there is no correlation among the extracted characteristics, the PCA method is adopted to optimize and reduce dimensions, and then the modified support vector machine(SVM) classifiers using the sequential minimal optimization(SMO) algorithm and the grid research method are proposed to improve the computing efficiency. Furthermore, the abundant lung CT images from the hospital partnership could confirm the experimental results. We compare the classification performance between the ensemble SVM(ESVM) classifier and the cost-sensitive SVM(CSVM) classifier to deal with this problem. Experimental results show the performance of the CSVM classifier based on grid search is satisfactory than the ESVM.

Detection of ischemic stroke using brain magnetic resonance imaging (MRI) images is vital and a challenging task in clinical practice. We propose a novel method based on optimization technique to identify stroke lesion in diffusion-weighted imaging (DWI) MRI sequences of the brain. The algorithm was tested in a specific slice having large area of stroke region from a series of 292 real-time images obtained from different stroke affected subjects from IMS and SUM Hospital. The proposed method consists of pre-processing, segmentation, extraction of important features and classification of stroke type. The particle swarm optimization (PSO) and Darwinian particle swarm optimization (DPSO) algorithms were applied in segmenting the stroke lesions. The important features were extracted with the gray-level co-occurrence matrix (GLCM) algorithm and in decision making process, the feature set is classified into three types of stroke according to The Oxfordshire Community Stroke Project (OCSP) classification using support vector machine (SVM) classifier. The lesion area was segmented effectively with DPSO process with classification weighted accuracy of 90.23%, which is higher than PSO method having weighted accuracy of 85.19%. Similarly, the values of different measured parameters were high in DPSO technique, the computational time was also higher in DPSO method for segmenting the stroke lesions. These results confirm that the DPSO-based approach with SVM classifier is an effective way to identify the decision making process of ischemic stroke lesion in MRI images of the brain.

In this paper, a novel chaos particle swarm optimization(PSO) clustering algorithm for texture image segmentation was proposed. By means of stochastic property and ergodicity of chaos search mechanism, chaos PSO algorithm can effectively avoid getting into the local convergence. The proposed method combined chaos PSO algorithm with nearest neighbor clustering theorem, which can enhance the efficiency and precision of clustering. And the proposed chaos PSO clustering algorithm was applied to texture image segmentation with gray level co-occurrence matrix. The experimental results indicate that the proposed method can get better segmentation results than PSO algorithm and effectively improve the segmentation precision of texture image.Keywordsparticle swarm optimizationchaostexture segmentationgray level co-occurrence matrix (GLCM)

A boosted SVM classifier trained by incremental learning and decremental unlearning approach

Clamping force control system is essential for clamping tasks that require high precision. In this paper, Active Disturbance Rejection Controller (ADRC) is applied for clamping force control system, aiming to achieve higher control precision. Furthermore, the CPSO-ADRC system is proposed and implemented by optimizing the critical parameters of ordinary ADRC using chaos particle swarm optimization (CPSO) algorithm. To verify the effectiveness of CPSO-ADRC, Particle Swarm Optimization- (PSO-) ADRC is introduced as a comparison. The simulation results show that the CPSO-ADRC can effectively improve the control quality with faster dynamic response and better command tracking performance compared to ordinary ADRC and PSO-ADRC.

BackgroundThis study aimed to screen the feature modules and characteristic genes related to ulcerative colitis (UC) and construct a support vector machine (SVM) classifier to distinguish UC patients.MethodsFour datasets that contained UC and control samples were obtained from the Gene Expression Omnibus database. Differentially expressed genes (DEGs) with consistency were screened via the MetaDE method. The weighted gene coexpression network (WGCNA) was used to distinguish significant modules based on the four datasets. The protein–protein interaction network was established based on intersection genes. Enrichment analysis of Gene Ontology (GO) biological processes (BPs) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment were established based on DAVID. An SVM combined with recursive feature elimination was also applied to construct a disease classifier for the disease diagnosis of UC patients. The efficacy of the SVM classifier was evaluated through receiver operating characteristic curves.ResultsTwelve highly preserved modules were obtained using the WGCNA, and 2009 DEGs with significant consistency were selected using the MetaDE method. Sixteen significantly related GO BPs and 12 KEGG pathways were obtained, such as cytokine-cytokine receptor interaction, cell adhesion molecules, and leukocyte transendothelial migration. Subsequently, 41 genes were used to construct an SVM classifier, such as CXCL1, CCR2, IL1B, and IL1A. The area under the curve (AUC) was 0.999 in the training dataset, whereas the AUC was 0.886, 0.790, and 0.819 in the validation set (GSE65114, GSE37283, and GSE36807, respectively).ConclusionsAn SVM classifier based on feature genes might correctly identify healthy people or UC patients.

This study investigated the effect of a new approach, the support vector machine, as a classifier tool to identify the weeds in corn fields at early growth stage. Image segmentation was done by transforming original color images to gray level images according to the statistical values of red, green, blue components. The Gray Level Co-occurrence Matrix (GLCM) and statistical properties of the histogram from the gray level images were further used to obtain the texture features of the weeds and corn seedlings. These texture features were used in the classification procedure. Principle component analysis was used to select the texture features according to their better contributions to reduce space dimensions. A Support Vector Machine (SVM) classifier was employed to recognize the weeds and the corn seedlings. The results indicated that the SVM classifiers with different feature selections could identify successfully weed-corn with a higher accuracy ranged from 92.31 to 100%. A comparison study of the recognition capabilities of SVM and back-propagation (BP) neural-network classifier using the same data set was conducted. It was found that the SVM classifier provided the best recognition performance with an accuracy of 100%, which exceeded the accuracy of 80% given by the BP classifier. Key words: Corn seedling, weeds, texture, support vector machine, recognize.

The Steer-by-Wire (SbW) system is an electronically controlled steering system that is able to improve steering capability without mechanical links between the steering wheel and the front wheels. However, failure of the SbW system actuator may lead to steering performance degradation and result in instability. In this paper, a fault tolerant sliding mode predictive control (SMPC) strategy for an SbW system is proposed. The sliding mode control is applied to improve the robustness of the model predictive control (MPC) in the presence of modeling uncertainties and disturbances, while the MPC is applied to enhance the fault tolerant capability of the steering control processes. The chaos particle swarm optimization (CPSO) algorithm is introduced to optimize the MPC and a two-stage Kalman filter is introduced to simultaneously provide fault information and state estimation. The performance of the proposed approach is validated through computer simulation. The results demonstrate that the proposed SMPC-CPSO controller is more robust and provides better tracking performance in the presence of model uncertainties, disturbance, and actuator faults than SCMP-PSOs (heterogeneous comprehensive learning particle swarm optimization, evolutionary particle swarm optimizer, etc), SMPC-differential evolution, MPC, SMPC, and MPC-PSO.

An iterative convergence control method (ICCM) based on the support vector regression (SVR) is proposed to realize the position–posture control of the planar four-link underactuated manipulator with a passive second link. Firstly, the particle swarm optimization (PSO) algorithm is used to obtain the target angles of all links according to the position–posture control objective. Then, two prediction models for the coupling relationship between the first link and the passive link, and the third link and the passive link are established based on the SVR, whose optimal parameters are selected by the chaos particle swarm optimization (CPSO) algorithm. By repeatedly controlling the first link or the third link to rotate an angle which is calculated by the trained SVR model, the passive link gradually converges to its target angle after several iterations. Next, the active links are controlled to rotate to their target angles with low speeds, and the passive link does not rotate due to friction. Finally, the experimental results verify the effectiveness and feasibility of the proposed method.