Research on Object-Oriented Design Defect Detection Method Based on Machine Learning

In recent years, there have been rapid improvements in both remote sensing methods and satellite image availability that have the potential to massively improve burn severity assessments of the Alaskan boreal forest. In this study, we utilized recent pre- and post-fire Sentinel-2 satellite imagery of the 2019 Nugget Creek and Shovel Creek burn scars located in Interior Alaska to both assess burn severity across the burn scars and test the effectiveness of several remote sensing methods for generating accurate map products: Normalized Difference Vegetation Index (NDVI), Normalized Burn Ratio (NBR), and Random Forest (RF) and Support Vector Machine (SVM) supervised classification. We used 52 Composite Burn Index (CBI) plots from the Shovel Creek burn scar and 28 from the Nugget Creek burn scar for training classifiers and product validation. For the Shovel Creek burn scar, the RF and SVM machine learning (ML) classification methods outperformed the traditional spectral indices that use linear regression to separate burn severity classes (RF and SVM accuracy, 83.33%, versus NBR accuracy, 73.08%). However, for the Nugget Creek burn scar, the NDVI product (accuracy: 96%) outperformed the other indices and ML classifiers. In this study, we demonstrated that when sufficient ground truth data is available, the ML classifiers can be very effective for reliable mapping of burn severity in the Alaskan boreal forest. Since the performance of ML classifiers are dependent on the quantity of ground truth data, when sufficient ground truth data is available, the ML classification methods would be better at assessing burn severity, whereas with limited ground truth data the traditional spectral indices would be better suited. We also looked at the relationship between burn severity, fuel type, and topography (aspect and slope) and found that the relationship is site-dependent.

Photometric redshifts (photo- z ’s) are crucial for the cosmology, galaxy evolution, and transient science drivers of next-generation imaging facilities like the Euclid Mission, the Vera C. Rubin Observatory, and the Nancy Grace Roman Space Telescope. Previous work has shown that image-based deep learning photo- z methods produce smaller scatter than photometry-based classical machine learning (ML) methods on the Sloan Digital Sky Survey (SDSS. Main Galaxy Sample, a test bed photo- z dataset. However, global assessments can obscure local trends. To explore this possibility, we used a self-organizing map (SOM) to cluster SDSS galaxies based on their ugriz colors. Deep learning methods achieve lower photo- z scatter than classical ML methods for all SOM cells. The fractional reduction in scatter is roughly constant across most of color space with the exception of the most bulge-dominated and reddest cells where it is smaller in magnitude. Interestingly, classical ML photo- z ’s suffer from a significant color-dependent attenuation bias, where photo- z ’s for galaxies within an SOM cell are systematically biased towards the cell’s mean spectroscopic redshift and away from extreme values, which is not readily apparent when all objects are considered. In contrast, deep learning photo- z ’s suffer from very little color-dependent attenuation bias. The increased attenuation bias for classical ML photo- z methods is the primary reason why they exhibit larger scatter than deep learning methods. This difference can be explained by the deep learning methods weighting redshift information from the individual pixels of a galaxy image more optimally than integrated photometry.

Obesity is a growing public health concern, particularly among university students who are exposed to lifestyle changes, disordered eating habits, and reduced physical activity. The aim of this study is to classify obesity risk levels among university students using machine learning classification methods and to identify the most influential factors associated with this risk. The study sample consisted of data collected from 445 students studying at Çankırı Karatekin University. In this context, eight machine learning algorithms—Logistic Regression, Random Forest, Extra Trees, Support Vector Machines, K-Nearest Neighbor, Quadratic Discriminant Analysis, Naive Bayes, and Multilayer Perceptron—were compared to classify obesity risk. Class imbalance in the dataset was addressed using the Adaptive Synthetic Sampling (ADASYN) method applied exclusively to the training set. The models were evaluated using standard performance metrics, and the highest accuracy rate (96.26%) was achieved by the Random Forest model, followed by Logistic Regression with 94.77% accuracy. Variable importance analysis indicated that age, internet use scale score, and fast-food consumption frequency were the most influential factors in classification, while the low correlation between variables (|r| < 0.2) suggested that model performance was driven by the combined contribution of multiple features. Overall, the findings demonstrate that the balanced machine learning approach, particularly ensemble-based methods, can classify obesity risk with high accuracy and provide valuable insights for targeted prevention strategies among university students.

Machine learning, data mining, and several related research areas are concerned with methods for the automated induction of models and the extraction of patterns from realistic data. Fuzzy classification is one of the important applications in fuzzy set where values ranges between 0 and 1 .Main objective of the fuzzy logic and fuzzy set to find a set of fuzzy rules that form a classification model. The set is major advantage of using fuzzy rules for classification applications to maintain transparency as well as high accuracy rate. Fuzzy pattern tree induction introduced as a novel for machine learning method for classification. Pattern tree is a hierarchical tree-like structure, whose inner nodes are marked with generalized (fuzzy) logical operators and whose leaf nodes are associated with fuzzy predicates on input attributes. Pattern tree make use of different aggregation including t-norms and t-conorms. There are two types of Fuzzy Pattern trees: (i) Bottom up induction: Information propagates from bottom to top. (ii) Top down induction: Information propagates from top to down. In this paper performance analysis and comparative study of above both approaches using number of parameters like accuracy rate, model size is mentioned. The paper is divided into five sections: section 1 is introduction of Fuzzy pattern tree, section 2 describes types of fuzzy pattern tree schemes and section 3 presents their comparative performance, section 4 does the conclusion. Section 5 includes future scope.

As the association of human leukocyte antigen B27 (HLA-B27) with spondylarthropathies is widely known, HLA-B27 antigen expression is frequently identified using flow cytometric or other techniques. Because of the possibility of cross-reaction with off target antigens, such as HLA-B7, each flow cytometric technique applies a "gray zone" reserved for equivocal findings. Our aim was to use machine learning (ML) methods to classify such equivocal data as positive or negative. Equivocal samples (n = 99) were selected from samples submitted to our institution for clinical evaluation by HLA-B27 antigen testing. Samples were analyzed by flow cytometry and polymerase chain reaction. Features of histograms generated by flow cytometry were used to train and validate ML methods for classification as logistic regression (LR), decision tree (DT), random forest (RF) and light gradient boost method (GBM). All evaluated ML algorithms performed well, with high accuracy, sensitivity, specificity, as well as negative and positive predictive values. Although, gradient boost approaches are proposed as high performance methods; nevertheless, their effectiveness may be lower for smaller sample sizes. On our relatively smaller sample set, the random forest algorithm performed best (AUC: 0.92), but there was no statistically significant difference between the ML algorithms used. AUC values for light GBM, DT, and LR were 0.88, 0.89, 0.89, respectively. Implementing these algorithms into the process of HLA-B27 testing can reduce the number of uncertain, false negative or false positive cases, especially in laboratories where no genetic testing is available.

PurposeSurface curvature is needed to analyze the range data of real objects and is widely applied in object recognition and segmentation, robotics, and computer vision. Therefore, it is not easy to estimate the curvature of the scanned data. In recent years, machine learning classification methods have gained importance in various fields such as finance, health, engineering, etc. The purpose of this study is to classify surface points based on principal curvatures to find the best method for determining surface point types.Design/methodology/approachA feature selection method is presented to find the best feature vector that achieves the highest accuracy. For this reason, ten different feature selections are used and six sample datasets of different sizes are classified using these feature vectors.FindingsThe author examined the surface examples based on the feature vector using the machine learning classification methods. Also, the author compared the results for each experiment.Originality/valueTo the best of the author's knowledge, this is the first study to examine surface points according to principal curvatures using machine learning classification methods.

Precise and timely leaf area index (LAI) estimation for winter wheat is crucial for precision agriculture. The emergence of high-resolution unmanned aerial vehicle (UAV) data and machine learning techniques offers a revolutionary approach for fine-scale estimation of wheat LAI at the low cost. While machine learning has proven valuable for LAI estimation, there are still model limitations and variations that impede accurate and efficient LAI inversion. This study explores the potential of classical machine learning models and deep learning model for estimating winter wheat LAI using multispectral images acquired by drones. Initially, the texture features and vegetation indices served as inputs for the partial least squares regression (PLSR) model and random forest (RF) model. Then, the ground-measured LAI data were combined to invert winter wheat LAI. In contrast, this study also employed a convolutional neural network (CNN) model that solely utilizes the cropped original image for LAI estimation. The results show that vegetation indices outperform the texture features in terms of correlation analysis with LAI and estimation accuracy. However, the highest accuracy is achieved by combining both vegetation indices and texture features to invert LAI in both conventional machine learning methods. Among the three models, the CNN approach yielded the highest LAI estimation accuracy (R 2 = 0.83), followed by the RF model (R 2 = 0.82), with the PLSR model exhibited the lowest accuracy (R 2 = 0.78). The spatial distribution and values of the estimated results for the RF and CNN models are similar, whereas the PLSR model differs significantly from the first two models. This study achieves rapid and accurate winter wheat LAI estimation using classical machine learning and deep learning methods. The findings can serve as a reference for real-time wheat growth monitoring and field management practices.

To prospectively evaluate the diagnostic performance of screening ABUS as the primary screening test for breast cancer among Korean women aged 40-49 years. This prospective, multicenter study included asymptomatic Korean women aged 40-49 years from three academic centers between February 2017 and October 2019. Each participant underwent ABUS without mammography, and the ABUS images were interpreted at each hospital with double-reading by two breast radiologists. Biopsy and at least 1 year of follow-up was considered the reference standard. Diagnostic performance of ABUS screening and subgroup analyses according to patient and tumor characteristics were evaluated. Reference standard data were available for 959 women. The recall rate was 9.8% (95% confidence interval [CI]: 7.9%, 11.7%; 94 of 959 women) and the cancer detection yield was 5.2 per 1000 women (95% CI: -0.6, 11.1; 5 of 959 women). There was only one interval cancer. The sensitivity was 83.3% (95% CI: 53.5%, 100%; 5 of 6 cancers) and the specificity was 90.7% (95% CI: 88.8%, 92.5%; 864 of 95. women). The positive predictive values of biopsies performed (PPV3) was 20.0% (95% CI: 4.3%, 35.7%; 5 of 25 women). Women with heterogeneous background echotexture had a higher recall rate (p = .009) and lower specificity (p = .036). Women with body mass index values < 25 kg/m2 had a higher mean recall rate (p = .046). In East Asia, screening automated breast US may be an alternative to screening mammography for detecting breast cancers in women aged 40-49 years. • Automated breast US screening for breast cancer in asymptomatic women aged 40-49 is effective with 5.2 per 1000 cancer detection yield. • Women with heterogeneous background echotexture had a higher recall rate and lower specificity. • Women with body mass index < 25 kg/m2 had a higher recall rate.

This work describes the production of an application Error Propagation Metrics from XMI which can extract process and display software design metrics from XMI files. The tool archives these design metrics in a standard XML format defined by a metric document type definition.;XMI is a flavour of XML allowing the description of UML models. As such, the XMI representation of a software design will include information from which a variety of software design metrics can be extracted. These metrics are potentially useful in improving the software design process, either throughout the early stages of design if a suitable XMI-enabled modelling tool is deployed, or to enable the comparison of completed software projects, by extracting design metrics from UML models reverse engineered from the implemented source code.;The tool is able to derive the error propagation of metrics from test XMI files created from UML sequence and state diagrams and from reverse engineered Java source code. However, variation was observed between the XMI representations generated by different software design tools, limiting the ability of the tool to process XMI from all sources. Furthermore, it was noted that subtle differences between UML design representations might have a marked effect on the quality of metrics derived.;In conclusion in order to validate the usefulness of these metrics that can be extracted from XMI files it would be useful to follow well-documented design projects throughout the total design and implementation process. Alternatively, the tool might be used to compare metrics from well-matched design implementations. In either case design metrics will only be of true value to software engineers if they can be associated empirically with a validated measure of system quality.

With the technology development on detecting circulating tumor cells (CTCs) and cell-free DNAs (cfDNAs) in blood, serum, and plasma, non-invasive diagnosis of cancer becomes promising. A few studies reported good correlations between signals from tumor tissues and CTCs or cfDNAs, making it possible to detect cancers using CTCs and cfDNAs. However, the detection cannot tell which cancer types the person has. To meet these challenges, we developed an algorithm, eTumorType, to identify cancer types based on copy number variations (CNVs) of the cancer founding clone. eTumorType integrates cancer hallmark concepts and a few computational techniques such as stochastic gradient boosting, voting, centroid, and leading patterns. eTumorType has been trained and validated on a large dataset including 18 common cancer types and 5327 tumor samples. eTumorType produced high accuracies (0.86–0.96) and high recall rates (0.79–0.92) for predicting colon, brain, prostate, and kidney cancers. In addition, relatively high accuracies (0.78–0.92) and recall rates (0.58–0.95) have also been achieved for predicting ovarian, breast luminal, lung, endometrial, stomach, head and neck, leukemia, and skin cancers. These results suggest that eTumorType could be used for non-invasive diagnosis to determine cancer types based on CNVs of CTCs and cfDNAs.

Fall prevention has always been a crucial topic for injury prevention. Research shows that real-time posture monitoring and subsequent fall prevention are important for the prevention of fall-related injuries. In this research, we determine a real-time posture classifier by comparing classical and deep machine learning classifiers in terms of their accuracy and robustness for posture classification. For this, multiple classical classifiers, including classical machine learning, support vector machine, random forest, neural network, and Adaboost methods, were used. Deep learning methods, including LSTM and transformer, were used for posture classification. In the experiment, joint data were obtained using an RGBD camera. The results show that classical machine learning posture classifier accuracy was between 75% and 99%, demonstrating that the use of classical machine learning classification alone is sufficient for real-time posture classification even with missing joints or added noise. The deep learning method LSTM was also effective in classifying the postures with high accuracy, despite incurring a significant computational overhead cost, thus compromising the real-time posture classification performance. The research thus shows that classical machine learning methods are worthy of our attention, at least, to consider for reuse or reinvention, especially for real-time posture classification tasks. The insight of using a classical posture classifier for large-scale human posture classification is also given through this research.

Analysis of structural design defects in parallel overloading mechanisms with cam transmission mechanism

Application of machine learning in carbon capture and storage: An in-depth insight from the perspective of geoscience

Software design is one of the most important and key activities in the system\ndevelopment life cycle (SDLC) phase that ensures the quality of software.\nDifferent key areas of design are very vital to be taken into consideration\nwhile designing software. Software design describes how the software system is\ndecomposed and managed in smaller components. Object-oriented (OO) paradigm has\nfacilitated software industry with more reliable and manageable software and\nits design. The quality of the software design can be measured through\ndifferent metrics such as Chidamber and Kemerer (CK) design metrics, Mood\nMetrics &amp; Lorenz and Kidd metrics. CK metrics is one of the oldest and most\nreliable metrics among all metrics available to software industry to evaluate\nOO design. This paper presents an evaluation of CK metrics to propose an\nimproved CK design metrics values to reduce the defects during software design\nphase in software. This paper will also describe that whether a significant\neffect of any CK design metrics exists on total number of defects per module or\nnot. This is achieved by conducting survey in two software development\ncompanies.\n

Excessive withdrawal of groundwater for agricultural irrigation can cause seawater intrusion into coastal aquifers. Such a case will in turn results in deterioration of irrigation water quality. Determination of irrigation water quality with traditional methods is a time-consuming and costly process. However, machine learning algorithms can be useful tools for modeling and estimating groundwater quality used for irrigation water purposes. In this study, TDS, PS, SAR, and Cl parameters of groundwater were estimated with models based on EC and pH variables. For this purpose, prediction performances of two different deep learning methods (convolutional neural network (CNN) and deep neural network (DNN)) and two different classical machine learning (Random Forest (RF) and extreme gradient boosting (XGBoost)) methods were compared. In addition, predictive uncertainty of the models was determined by quantile regression (QR) analysis. Performance criteria and results of uncertainty analysis revealed that CNN (in testing phase, NSE = 0.95 for TDS, NSE = 0.96 for PS, NSE = 0.67 for SAR and NSE = 0.93 for CI) and DNN (in testing phase, NSE = 0.91 for TDS, NSE = 0.91 for PS, NSE = 0.57 for SAR and NSE = 0.94 for Cl) models had quite a close performance in estimation of TDS, PS, SAR, and Cl parameters and higher than the other two classical machine learning methods. As a result, the CNN model can be considered the best performing model in estimating all quality parameters due to the highest NSE and lowest RMSE values. In addition, the Taylor diagram showed that the values estimated using the CNN model had the highest correlation with the measured data. It was determined that the model with the lowest uncertainty based on the PICP statistics was DNN, followed by the CNN model. However, the CNN model has predicted outliers more accurately. Present findings proved that deep learning models could offer efficient tools for predicting irrigation water quality parameters.