Research on surface defect detection method and optimization of paper-plastic composite bag based on improved combined segmentation algorithm

We present a novel method for small surface defect detection based on the spatially filtered dynamic speckles. This method possesses high fidelity and versatility. Factors defining resolution of the proposed method is estimated and it is shown that resolution depends solely on the geometrical parameters of the optical system. Experimental results demonstrate feasibility of the proposed method for surface defect detection and are in good agreement with the theoretical estimations. A prototype for online detection of the defects with diameter of 400 µm is presented. Ways to improve prototype performance and the method resolution are discussed.

QRNet: Query-based reparameterization net for real-time detection of power adapter surface defects

Various methods of detecting surface defects are being used in automated industrial manufacturing environments. This work presents the design and development of a laser charged couple device (CCD) displacement scanning system. The surface defect detection method using a laser CCD displacement sensor is derived from an idea in which surface defects such as cracks, inclusions and holes of three‐dimensional morphology characteristics are compared to normal surface especially in continuous casting slabs. Some novel research methods have been applied to develop the surface defect detection system used: first, getting a one‐dimensional distance matrix along transverse direction and a two‐dimensional matrix combining with a certain moving speed through the laser CCD displacement sensor; second, obtaining the slab surface profile and mapping to a greyscale image and finally, obtaining the surface defect regions by an image processing and searching algorithm and quantitatively detecting slab surface defect shape and depth. The research results in the lab trials have shown that the methodology proposed is effective to detect two‐dimensional defect size and reconstruct a three‐dimensional surface defect shape. At the same time, it is also able to accurately locate and identify surface defects and realise automatic surface defect non‐destructive detection online, and provides a theoretical base and technology idea for further studying surface defects online inspection for hot continuous casting slab.

The design and study of pulsed eddy current sensors for detecting surface defects in small-diameter rods are highly significant. Accurate detection and identification of surface defects in small-diameter rods may be attained by the ongoing optimization of sensor design and enhancement of detection technologies. This article presents the construction of a non-coaxial differential eddy current sensor (Tx-Rx sensor) and examines the detection of surface defects in a small diameter bar. A COMSOL 3D model is developed to examine the variations in eddy current distribution and defect signal characteristics between the plate and rod components. The position of the excitation coil on the bar and the eddy current disruption around the defect are examined. Additionally, a Tx-Rx sensor has been developed and enhanced concerning coil dimensions, coil separation, and elevation height. An experimental system is established to detect bar structures with surface defects of varying depths, and a model correlating differential signal attenuation with defect depth is proposed, achieving a quantitative relative error of less than 5%, thereby offering a reference for the quantitative detection of bar surface defects.

Surface defect detection aims to classify and locate a certain defect that exists in the target surface area. It is an important part of industrial quality inspection. Most of the research on surface defect detection are currently based on convolutional neural networks (CNNs), which are more concerned with local information and lack global perception. Thus, CNNs are unable to effectively extract the defect features. In this paper, a defect detection method based on the Swin transformer is proposed. The structure of the Swin transformer has been fine-tuned so that it has five scales of output, making it more suitable for defect detection tasks with large variations in target size. A bi-directional feature pyramid network is used as the feature fusion part to efficiently fuse to the extracted features. The focal loss is used as a loss function to weight the hard- and easy-to-distinguish samples, potentially making the model fit the surface defect data better. To reduce the number of parameters in the model, a shared detection head was chosen for result prediction. Experiments were conducted on the flange surface defect dataset and the steel surface defect dataset, respectively. Compared with the classical CNNs target detection algorithm, our method improves the mean average precision (mAP) by about 15.4%, while the model volume and detection speed are essentially the same as those of the CNNs-based method. The experimental results show that our proposed method is more competitive compared with CNNs-based methods and has some generality for different types of defects.

Traditional manual inspection approaches face challenges due to the reliance on the experience and alertness of operators, which limits their ability to meet the growing demands for efficiency and precision in modern manufacturing processes. Deep learning techniques, particularly in object detection, have shown significant promise for various applications. This paper proposes an improved YOLOv11-based method for surface defect detection in electronic products, aiming to address the limitations of existing YOLO models in handling complex backgrounds and small target defects. By introducing the MD-C2F module, DualConv module, and Inner_MPDIoU loss function, the improved YOLOv11 model has achieved significant improvements in precision, recall rate, detection speed, and other aspects. The improved YOLOv11 model demonstrates notable improvements in performance, with a precision increase from 90.9% to 93.1%, and a recall rate improvement from 77.0% to 84.6%. Furthermore, it shows a 4.6% rise in mAP50, from 84.0% to 88.6%. When compared to earlier YOLO versions such as YOLOv7, YOLOv8, and YOLOv9, the improved YOLOv11 achieves a significantly higher precision of 89.3% in resistor detection, surpassing YOLOv7’s 54.3% and YOLOv9’s 88.0%. In detecting defects like LED lights and capacitors, the improved YOLOv11 reaches mAP50 values of 77.8% and 85.3%, respectively, both outperforming the other models. Additionally, in the generalization tests conducted on the PKU-Market-PCB dataset, the model’s detection accuracy improved from 91.4% to 94.6%, recall from 82.2% to 91.2%, and mAP50 from 91.8% to 95.4%.These findings emphasize that the proposed YOLOv11 model successfully tackles the challenges of detecting small defects in complex backgrounds and across varying scales. It significantly enhances detection accuracy, recall, and generalization ability, offering a dependable automated solution for defect detection in electronic product manufacturing.

Surface defect detection is challenging due to varying defect types and their novelties. Because of this, it is hard for algorithms to implement across datasets. Moreover, current automated optical inspection (AOI) machines cannot handle this novelty effectively. In this work, we develop a new method for surface defect detection based on generative models, which can detect novelty according to learned distributions. Experimental results on real industrial datasets show that the proposed method can successfully construct the surface texture pattern generator. By transforming the image through the generator to the corresponding latent space, the defects can be separated effectively without a tedious effort of annotation in a large amount of training data.

Electrolytic capacitor surface defect detection based on deep convolution neural network

Mechanical parts often have surface defects such as scratches, cracks and pits during the production process, which seriously affect product quality and service life. To address this challenge, this paper proposes a method for detecting and quantifying surface defects of mechanical parts based on image processing. First, this paper uses high-resolution image acquisition technology to obtain surface images of mechanical parts, and improves image quality through preprocessing steps. Then, this paper uses edge detection, morphological operations, and image segmentation algorithms to extract the features of surface defects, thereby realizing automatic identification of defective areas. Finally, this paper combines the Faster R-CNN (Faster Region-Based Convolutional Neural Network) algorithm to further refine the classification and quantification of defects and obtain the specific location, size and type of defects. Experimental results show that among the 500 mechanical parts samples tested, the proposed method has a mean average precision (mAP) of 0.93 in surface defect detection. Compared with other image processing methods, this method has significantly improved defect detection accuracy and speed. Especially when processing higher-resolution images, the Faster R-CNN model can achieve efficient defect classification and quantification to meet the needs of real-time detection in industrial production.

In the industrial production of expanded thermoplastic polyurethane (E-TPU) midsoles, the surface defects still rely on manual inspection at present, and the eligibility criteria are uneven. Therefore, this paper proposes an E-TPU midsole surface defect detection method based on machine vision to achieve automatic detection and defect classification. The proposed method is divided into three parts: image preprocessing, block defect detection, and linear defect detection. Image preprocessing uses RGB three channel self-inspection to identify scorch and color pollution. Block defect detection uses superpixel segmentation and background prior mining to determine holes, impurities, and dirt. Linear defect detection uses Gabor filter and Hough transform to detect indentation and convex marks. After image preprocessing, block defect detection and linear defect detection are simultaneously performed by parallel computing. The false positive rate (FPR) of the proposed method in this paper is 8.3%, the false negatives rate (FNR) of the hole is 4.7%, the FNR of indentation is 2.1%, and the running time does not exceed 1.6 s. The test results show that this method can quickly and accurately detect various defects in the E-TPU midsole.

Machine learning and image processing have been combined to identify and detect defects in mature citrus fruit at night, which has great research and development significance. First, a multi-light vision system was used to collect citrus UV images, and from these, 1500 samples were obtained, 80% of which were training and 20% were experimental sets. For a support vector machine (SVM) model with “2*Cb-Cr”, “4*a-b-l”, and “H” as the training features, the accuracy of the final training model in the experimental set is 99.67%. Then, the SVM model was used to identify mature citrus regions, detect defects, and output the defective citrus regions label. The average running time of the detection algorithm was 0.84097 s, the accuracy of citrus region detection was 95.32%, the accuracy of citrus defect detection was 96.32%, the precision was 95.24%, and the recall rate was 87.91%. The results show that the algorithm had suitable accuracy and real-time performance in recognition and defect detection in citrus in a natural environment at night.

Ductile cast iron pipes (DCIPs) are widely utilized in water and gas supply due to their exceptional mechanical and material properties. Quality control during production is paramount for optimal performance, with surface defect detection being of utmost importance. Currently, production sites primarily rely on manual visual inspection, which presents several challenges, including high labor intensity, low efficiency, and subjectivity in defect judgment. 2D detection algorithms based on single images struggle to effectively detect small defects such as pores, pinholes, and scratches, resulting in high missed detection rates and vulnerability to interference from oil and water stains. To address these issues, this paper proposes a symmetrical twin-light photometric stereo (TLPS) detection algorithm based on photometric stereo theory, and image correction algorithm for mitigating the effects of ambient light. A visual inspection prototype system was designed and successfully implemented at a production site. The system comprises eight visual inspection units, each equipped with a high-speed line scan camera and two bar light sources for image acquisition of moving DCIP. Under the Lambertian model and parallel light source assumption, the gradient expression in the texture direction of the DCIP surface is derived based on light source symmetry. Production experiment results demonstrate that the gradient map obtained through the proposed TLPS effectively enhances defect contrast and accurately detects and locates micro defects such as pores, pinholes, and scratches on cast pipe surfaces. This verifies the effectiveness of the TLPS algorithm, addresses the shortcomings of traditional 2D detection algorithms, and lays the foundation for subsequent online detection of DCIP surface defects.

Sanitary ceramic products, such as toilet and wash basin, are widely used in our daily life. Sanitary ceramics are expected to have some excellent physical properties, such as corrosion resistance, easy cleaning, and low water absorption. However, surface defects in sanitary ceramics are inevitable due to complex production processes and changing production environment. Therefore, surface defect detection must be performed in the manufacturing process of sanitary ceramics. There are many types of surface defects in sanitary ceramics, and different types of defects have large differences in characteristics and scales. Traditional detection methods with artificially designed features and classifiers are difficult to apply in this context. In addition, there are few studies on surface defect detection methods of sanitary ceramics based on deep neural networks. In this article, a lightweight real-time defect detection network based on the lightweight backbone MobileNetV3 is presented. The proposed network achieves multi-scale detection of surface defects in sanitary ceramics with a multi-layer feature pyramid. Combining region proposal network and anchor-free method, real-time defect detection is achieved. Finally, a detection head with channel attention structure and a low-level mixed feature classification strategy is used to perform defect classification with higher accuracy. Experimental results show that the proposed approach achieves at least 22.9% detection speed improvement and 35.0% average precision improvement while reducing memory consumption by at least 8.4% compared with the classic one-stage SSD, YOLO V3 and two-stage Faster R-CNN methods.

In order to solve the problems of low recognition rate, incapability of autonomous detection and weak generality of the existing surface defect detection methods, an improved depth learning surface defect detection method is proposed. This method improves the convolution neural network model in depth learning and divides it into two modules: segmentation module and decision module. After preprocessing, the image is input to the segmentation module for training, and then the output of the segmentation module and network features are used as input to the decision module to detect defects in the image. In the improved model, the convolution layer and convolution kernel size in the segmentation module are optimized, and a new convolution network model is constructed. In downsampling, the maximum pool is used instead of the maximum stride, and the loss function and activation function are designed at the same time. Experiments show that the method has a high defect detection accuracy rate of 99%, realizes autonomous detection, and has certain universality.

The detection of rail surface defects is an important tool to ensure the safe operation of rail transit. Due to the complex diversity of track surface defect features and the small size of the defect area, it is difficult to obtain satisfying detection results by traditional machine vision methods. The existing deep learning-based methods have the problems of large model sizes, excessive parameters, low accuracy and slow speed. Therefore, this paper proposes a new method based on an improved YOLOv4 (You Only Look Once, YOLO) for railway surface defect detection. In this method, MobileNetv3 is used as the backbone network of YOLOv4 to extract image features, and at the same time, deep separable convolution is applied on the PANet layer in YOLOv4, which realizes the lightweight network and real-time detection of the railway surface. The test results show that, compared with YOLOv4, the study can reduce the amount of the parameters by 78.04%, speed up the detection by 10.36 frames per second and decrease the model volume by 78%. Compared with other methods, the proposed method can achieve a higher detection accuracy, making it suitable for the fast and accurate detection of railway surface defects.