Research on Tractor Condition Recognition Based on Neural Networks

Diabetes Mellitus is a chronic, non-infectious disease that affects people’s health, which has a rapid onset trend with the continuous improvement of China’s economy and material life. At present, there is no practical solution to this condition. Diabetic retinopathy (DR) is the most important manifestation of diabetic microangiopathy, which can be divided into proliferative lesion and non-proliferative lesion. The traditional artificial diagnosis method has strong subjectivity and low accuracy. Because disease diagnosis can be regarded as a two-classification pattern recognition problem, the application of neural network method can provide the possibility for the application of artificial intelligence (AI) in disease-assisted diagnosis and treatment. Furthermore, it has significant meanings to find which kind of neural network has a better efficiency. In this paper, learning vector quantization (LVQ) neural network and back propagation (BP) neural network were used to diagnose diabetes and diabetic retinopathy with MATLAB and their recognition rate were compared. The datasets of diabetes and diabetic retinopathy were available in the UCI database. The experiment results were analyzed to evaluate the efficiency of each neural network classifier. The results demonstrate that both LVQ neural network and BP neural network can classify the two datasets effectively. However, compared with the LVQ neural network, the average accuracy rate and sensitivity of the BP neural network is higher.

Standard back propagation (BP) neural network has disadvantages such as slow convergence speed, local minimum and difficulty in definition of network structure. In this paper, an learning vector quantization (LVQ) neural network classifier is established, then it is applied in pattern classification of two-dimensional vectors on a plane. To test its classification ability, the classification results of LVQ neural network and BP neural network are compared with each other. The simulation result shows that compared with classification method based on BP neural network, the one based on LVQ neural network has a shorter learning time. Besides, its requirements for learning samples and the number of competing layers are also lower. Therefore it is an effective classification method which is powerful in classification of two-dimensional vectors on a plane.

The design of pattern classifiers such as multiprototype classifiers and neural network classifiers such as learning vector quantization and radial basis function neural networks requires reducing the size of the training data sets. In addition, memory storage, computation complexity and time, and data redundancy demand many pattern classifiers to use a smaller subset of a training data set. In this paper, we present a data reduction algorithm which automatically selects the subset of training data that faithfully represents the training data set for pattern classification. The applicability of this algorithm is demonstrated through k-nearest neighbor and learning vector quantization neural networks classifiers using both speech and synthetic data sets.

A learning vector quantization(LVQ) neural network classifier is for the first time applied for SAR data classification, of which the training termination rule is modified to make it have both the ability of classification and class signature analysis. A very high land cover classification accuracy is achieved. Especially under the condition that texture is considered, almost all roads can be classified correctly, which cannot be identified by BP MLP neural network and ML classifier.

The Raman spectra of tissue of 20 brain tumor patients was recorded using a confocal microlaser Raman spectroscope with 785 nm excitation in vitro. A total of 133 spectra were investigated. Spectra peaks from normal white matter tissue and tumor tissue were analyzed. Algorithms, such as principal component analysis, linear discriminant analysis, and the support vector machine, are commonly used to analyze spectral data. However, in this study, we employed the learning vector quantization (LVQ) neural network, which is typically used for pattern recognition. By applying the proposed method, a normal diagnosis accuracy of 85.7% and a glioma diagnosis accuracy of 89.5% were achieved. The LVQ neural network is a recent approach to excavating Raman spectra information. Moreover, it is fast and convenient, does not require the spectra peak counterpart, and achieves a relatively high accuracy. It can be used in brain tumor prognostics and in helping to optimize the cutting margins of gliomas.

Transformer inrush currents are high magnitude, harmonic-rich currents generated when transformer cores are driven into saturation during energization. In this paper an efficient method for detection of inrush current in distribution transformer based on wavelet transform is presented. Using this method inrush current can be discriminate from other transients such as capacitor switching, load switching and single phase to ground fault. Wavelet transform is used for decomposition of signals and Learning Vector Quantizer(LVQ) neural network used for classification. Inrush current data and other transients are obtained by simulation using EMTP program. Results show that the proposed procedure is efficient in identifying inrush current from other events.

It is an important part in aluminum electrolysis production to control the anode effect (AE). Since there are some shortcomings in traditional methods of anode effect prediction in aluminum electrolysis, this paper combined two methods, the slope of cell resistance and learning vector quantization (LVQ) neural network, to predict anode effect. First of all, the first prediction of anode effect will be conducted based on the slope of cell resistance. Afterwards, the inaccurate data are supposed to be re-predicted. The second prediction consists of two steps, one is to estimate the power spectrum from the signal of cell resistance by means of periodogram, the other is to re-predict the anode effect with the LVQ neural network, since the energy of frequency bands are served as the input feature variables of neural network, so as to raise the accuracy of prediction. It turned out that the success rate of ten-minute in advance prediction for anode effect can be above 85%, though just cell resistance signal is studied.

This paper proposes a framework for developing a broad variety of soft clustering and learning vector quantization (LVQ) algorithms based on gradient descent minimization of a reformulation function. According to the proposed axiomatic approach to learning vector quantization, the development of specific algorithms reduces to the selection of a generator function. A linear generator function leads to the fuzzy c-means (FCM) and fuzzy LVQ (FLVQ) algorithms while an exponential generator function leads to entropy constrained fuzzy clustering (ECFC) and entropy constrained LVQ (ECLVQ) algorithms. The reformulation of clustering and LVQ algorithms is also extended to supervised learning models through an axiomatic approach proposed for reformulating radial basis function (RBF) neural networks. This approach results in a broad variety of admissible RBF models, while the form of the radial basis functions is determined by a generator function. This paper shows that gradient descent learning makes reformulated RBF neural networks an attractive alternative to conventional feed-forward neural networks.

Timely identification of the aging stage of the transformer can effectively ensure the safe operation of the transformer and prevent the aging fault of the transformer. This work proposes the aging diagnosis of transformer using the Raman spectroscopic recurrence plot combined with learning vector quantization (LVQ) neural network. Oil-paper insulation samples at different aging stages are obtained by accelerated thermal aging tests. Acquisition of Raman spectra of insulating oil is from 800 to 3000 cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> and converts to the Raman spectroscopic recurrence plot. The gray-level cooccurrence matrix (GLCM) is used to extract the characteristic information of the Raman spectroscopic recurrence plot. The optimal number of neurons in competitive layer of LVQ neural network is determined by the experimental method. A transformer aging diagnosis model based on the Raman spectroscopic recurrence plot is established. The results show that the diagnostic accuracy of the proposed diagnostic model reached 95%. The Raman spectroscopic recurrence plot has more abundant aging “fingerprint” characteristic information and the proposed diagnostic method shows potential for monitoring oil-paper insulation.

The current study presents the hard implementation methodology of a Learning Vector Quantization (LVQ) neural network on a Field Programmable Gate Array (FPGA) circuit specially suited for fast output applications. The implementation methodology is based on a mixed parallel sequential approach with the use of the L2 norm (Euclidian distance) to measure the distance between the reference vector and the prototype vector. The adopted architecture has been implemented on a device XCV1000 (FPGA Xilinx) and the given results have shown good performances in time, surface and consumption.

Artificial neural networks implement a simplified model of the human brain and thus specialize on pattern recognition. As an alternative to conventional single-instruction-multiple-data (SIMD) solutions with massive parallelism for self-organizing-map (SOM) neural network models, we report resource-efficient hardware architecture for 1-chip implementation of the learning vector quantization (LVQ) neural network algorithm, which is a variant of SOM. Dynamic configurability for two operation modes is realized through the same circuitry for recognition based on nearest-neighbor matching and on-chip learning based on error back-propagation. Switching between learning and recognition modes is carried out by a pipeline with multiplexers and parallel p-word input (P-MPPI). The multiplexers enable data-flow-path reconfiguration, resulting in a significant reduction of area and power consumption. Thus, the P-MPPI architecture achieves time-domain multiplexing between operation modes as well as area/energy-efficiency by reusing both memory arrays and arithmetic or logic units. Additionally, high flexibility for feature-vector dimension and reference-vector number allows the implementation of many different applications, including continuously adaptive neural systems, on the same hardware platform. A test chip in TSMC 65 nm CMOS has parallel 32-word inputs, 585 K-bit on-chip memory, and achieves high processing throughput of 76.8 Gbps and low power consumption of 27.92 mW (at 150 MHz, 1.0 V supply voltage).

Objective of this study is to investigate the potential of the learning vector quantizer neural network (LVQ-NN) classifier on various diagnostic variables used in the modern cytopathology laboratory and to build an algorithm that may facilitate the classification of individual cases. From all women included in the study, a liquid-based cytology sample was obtained; this was tested via HPV DNA test, E6/E7 HPV mRNA test, and p16 immunostaining. The data were classified by the LVQ-NN into two groups: CIN-2 or worse and CIN-1 or less. Half of the cases were used to train the LVQ-NN; the remaining cases (test set) were used for validation. Out of the 1258 cases, cytology identified correctly 72.90% of the CIN-2 or worst cases and 97.37% of the CIN-1 or less cases, with overall accuracy 94.36%. The application of the LVQ-NN on the test set allowed correct classification for 84.62% of the cases with CIN-2 or worse and 97.64% of the cases with CIN-1 or less, with overall accuracy of 96.03%. The use of the LVQ-NN with cytology and the proposed biomarkers improves significantly the correct classification of cervical precancerous lesions and/or cancer and may facilitate diagnosis and patient management.

At present, study on the non-asbestos gasket materials is the hotspot research in static sealing field. The non-asbestos sealing gaskets research and development has made great strides into the practical phase. Formula is an important factor of material, which determines performance of material. In order to obtain well performance, it is needed to optimization formula to get optimal formula that not only improve performance of non-asbestos gasket, but also reduce development time accordingly reduce cost of non-asbestos gasket. Classification of raw materials can be transformed into a mathematical clustering problem. It means that according to some algorithm, there will be some sort of input values of similar links together. Many neural networks were widely used in the classification of different materials. A method of classification by using neural network to the known 15 kinds of the non-asbestos gaskets of formula data was proposed in this paper. By using the PNN (probabilistic neural network), LVQ(Learning Vector Quantization) neural network and SOM (Self-Organizing Feature Map) neural network respectively to classify the non-asbestos gaskets to find a suitable method in the classification of non-asbestos gaskets formula. The results indicated that PNN neural network and LVQ neural network method based on the data that provided in the paper both can effectively classify, while SOM neural network can not classify them ideally, thus it provides a new theoretical basis for the classification of the non-asbestos gaskets.

The learning vector quantization(LVQ) is a model of neural networks, and it is used for complex pattern classifications in which typical feedforward networks don’t give a good performance. Fault tolerance is an important feature in the neural networks, when they are used for critical application. Many methods for enhancing the fault tolerance of neural networks have been proposed, but most of them are for feedforward networks. There is scarcely any methods for fault tolerance of LVQ neural networks. In this paper, I proposed a dependability measure for the LVQ neural networks, and then I presented two idea, the border emphasis and the encouragement of coupling, to improve the learning algorithm for increasing dependability. The experiment result shows that the proposed algorithm trains networks so that they can achieve high dependability.

This paper introduces a modification on using active shape models (ASM) for automatic landmark detection in cephalometry. In first step, some feature points are extracted to model the size, rotation, and translation of skull. A learning vector quantization (LVQ) neural network is used to classify images according to their geometrical specifications. Using LVQ for every new image, the possible coordinates of landmarks are estimated. Then a modified ASM is applied and a principal component analysis (PCA) is incorporated to analyze each template. The local search to find the best match to the intensity profile is then used and every point is moved to get the best location. Finally a sub image matching procedure is applied to pinpoint the exact location of each landmark. On average 24 percent of the 16 landmarks are within 1 mm of correct coordinates, 61 percent within 2 mm, and 93 percent within 5 mm, which shows a distinct improvement on other proposed methods.