• Home
  • Search
  • Research progress on solid polymer electrolytes
  • Cite Icon15
  • https://doi.org/10.1360/tb-2021-1078Copy DOI Icon

Research progress on solid polymer electrolytes

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

<p indent="0mm">Since the commercialization of lithium-ion batteries in the 1990s, lithium-ion batteries have been successfully applied in portable electronics, electric vehicles, and grid energy storage. Although current organic liquid electrolytes have high ionic conductivities, they are inherently flammable, volatile, and prone to leakage. Moreover, severe side reactions and dendrite growth on the surface of the lithium anode during the charge-discharge process can cause safety hazards, which greatly impede their applications in lithium metal batteries. Solid electrolytes, including inorganic solid electrolytes and polymer electrolytes, are regarded as effective alternatives to organic liquid electrolytes for the construction of lithium metal batteries with high energy density and safety. Among them, solid polymer electrolytes offer excellent flexibility, processability, and interfacial compatibility over inorganic solid electrolytes, and they are extraordinarily promising for lithium metal batteries with high energy density and safety. Ideal solid polymer electrolytes should have following features: (1) High ionic conductivity (&gt; <sc>10 <sup>–4</sup> S cm <sup>–1</sup>) </sc> at room temperature; (2) high lithium ion transference number (~1) to reduce the concentration polarization and improve the rate performance of batteries; (3) intimate contact at the electrode/electrolyte interfaces; (4) wide electrochemical window <sc>(&gt;4.5 V</sc> vs. Li/Li <sup>+</sup>) to match high-voltage cathodes and improve the energy density of batteries; (5) good mechanical stability to resist processing, buffer electrode volume change and inhibit dendrite growth; (6) good thermal stability to withstand environmental changes. Generally, the ionic conductivity of pure solid polymer electrolytes at room temperature is low <sc>(~10 <sup>–6</sup> S cm <sup>–1</sup>). </sc> Researchers have tried to improve the ionic conductivities by adjusting the lithium salt concentration, such as developing “polymer-in-salt” solid electrolytes. However, increasing the concentration of lithium salt leads to the deterioration of the mechanical strength. Strategies such as developing novel lithium salts, modifying polymer matrix, and incorporating inorganic fillers into solid polymer electrolytes are proposed to promote ionic conductivities of solid polymer electrolytes. In particular, composite polymer electrolytes, fabricated by dispersing a certain amount of inorganic fillers into solid polymer electrolytes, have improved ionic conductivities without sacrificing their mechanical performances. Poor interfacial property between electrodes and electrolytes is also a critical issue for solid polymer electrolytes. On one hand, poor and uneven solid/solid contacts at the electrode/electrolyte interfaces lead to high resistance and sluggish ionic transport kinetics. Furthermore, the volume change of the positive and negative electrodes in the charge/discharge process deteriorates the interfacial contacts, blocks the ion and electron transport through the interfaces, and greatly reduces the electrochemical reaction kinetics. On the other hand, the electrochemical windows of solid polymer electrolytes are usually narrow <sc>(<4.5 V).</sc> During cycling, redox reactions are prone to occur at the electrode/electrolyte interfaces, causing battery failure. Solid polymer electrolytes have also poor thermal and mechanical stabilities. Therefore, design and synthesis of polymer-based solid electrolytes with excellent comprehensive performances and construction of fast and stable ion transport channels at the electrolyte/electrode interfaces are of great significance for the successful development of solid-state lithium metal batteries. This paper presents a brief review of the research progress in solid polymer electrolytes from two aspects: Improving the ionic conductivities of solid polymer electrolytes and enhancing the interfacial performance at electrolyte/electrode interfaces. First, targeted optimization strategies on ionic conductivities of solid polymer electrolytes, including constructing continuously aligned ionic transport paths and shortening the ionic transport distance, are summarized. Second, interface optimization strategies, including constructing wetting interfaces and synthesizing asymmetric electrolytes, are presented to reduce the interface resistance and improve the interfacial contact. Finally, perspectives on the development of solid polymer electrolytes and high-performance solid-state lithium metal batteries are discussed, and key research directions and advanced test methods are proposed. This review may provide a comprehensive understanding and further guidance for not only the material design of solid polymer electrolytes, but also the structural design of lithium metal batteries with favorable electrochemical and interfacial performances.

Similar Papers
  • Research Article

A Step Towards the Impossible – the Combination of High Ionic Conductivity and Mechanical Stability in Highly Crystalline Solid Polyketone Electrolytes

  • Dec 22, 2023
  • Electrochemical Society Meeting Abstracts
  • Rassmus Andersson +3
  • Research Article
  • Citations15

PEO-based polymer electrolytes in lithium ion batteries

  • Jun 25, 2018
  • Chinese Science Bulletin
  • Zongjie Sun +1
  • Research Article
  • Citations45

A strong Lewis acid imparts high ionic conductivity and interfacial stability to polymer composite electrolytes towards all-solid-state Li-metal batteries

  • Jan 10, 2022
  • Science China Materials
  • Litong Wang +9
  • Research Article
  • Citations25

Cubic garnet solid polymer electrolyte for room temperature operable all-solid-state-battery

  • Nov 01, 2021
  • Journal of Materials Research and Technology
  • Van Tung Luu +11
  • Research Article

Solid Polymer Electrolyte with 4.8 V Stability for High-Voltage Lithium Metal Batteries with a 523 Wh kg –1 Prototype Demonstration

  • Mar 17, 2026
  • ACS Applied Energy Materials
  • Peng Wang +3
  • Research Article
  • Citations292

Thiol-Branched Solid Polymer Electrolyte Featuring High Strength, Toughness, and Lithium Ionic Conductivity for Lithium-Metal Batteries.

  • Jul 30, 2020
  • Advanced Materials
  • Hangchao Wang +8
  • Research Article

Efficient Shuttling of Li + by an Amide at the COF/PEO Interface in a Composite Solid Polymer Electrolyte

  • Mar 05, 2026
  • ACS Applied Energy Materials
  • Yaping Sun +8
  • Research Article
  • Citations220

Challenges of polymer electrolyte with wide electrochemical window for high energy solid‐state lithium batteries

  • Jan 16, 2023
  • InfoMat
  • Sida Huo +6
  • Research Article
  • Citations27

Graphitic carbon nitride assisted PVDF-HFP based solid electrolyte to realize high performance solid-state lithium metal batteries

  • Nov 07, 2022
  • Colloids and Surfaces A: Physicochemical and Engineering Aspects
  • Jiangnan Li +4
  • Research Article

Optimization of Cation−Anion Dynamics in Cationic Polymer Electrolytes for Boosting the Performance of All‐Solid‐State Lithium−Metal Battery

  • Mar 27, 2026
  • Advanced Functional Materials
  • Ping Feng +6
  • Research Article
  • Citations14

A simple low-cost method to prepare gel electrolytes incorporating graphene oxide with increased ionic conductivity and electrochemical stability

  • Feb 01, 2022
  • Journal of Electroanalytical Chemistry
  • Wei-Chi Lai +1
  • Research Article
  • Citations4

Self‐Supporting Solid Electrolyte Based on Supramolecular Interaction for Stable Li Metal Batteries

  • Jun 24, 2024
  • Batteries &amp; Supercaps
  • Lixiang Guan +12
  • Research Article

Conception of Hybrid Organic-Inorganic Membrane as New Electrolyte in All Solid-State Battery

  • Aug 28, 2023
  • Electrochemical Society Meeting Abstracts
  • Agathe Naboulsi +3
  • PDF
  • Research Article
  • Citations6

Fingerprint of semi-crystalline structure memory in the thermal and ionic conduction properties of amorphous ureasil–polyether hybrid solid electrolytes†

  • Jan 01, 2022
  • RSC Advances
  • Gustavo Palácio +2
  • Research Article
  • Citations2

Research progress in lithium-ion solid electrolytes of oxidates

  • Jul 15, 2024
  • Chinese Science Bulletin
  • Yaqiu Wang +6
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.