RFID Indoor Location Based on Optimized Generalized Regression Neural Network

With the increasing demand for location-based services, indoor localization technology based on wireless sensor networks (WSNs) has recently received significant attention. Bluetooth low energy (BLE) has become a research hotspot among the numerous WSNs due to its ubiquitous deployment, low-power consumption, and low cost. Many previous BLE-based indoor localization technologies can only use received signal strength indication (RSSI) for localization in the 2-D plane and achieve coarse accuracy. However, high-accuracy location information is required in an increasing number of applications, e.g., elderly fall detection for medical applications, which urgently requires a new BLE-based localization technology in 3-D space. To this end, we propose Spotlight, an angle-based fine-grained indoor localization system in 3-D space using BLE sensors. The critical idea of the Spotlight is to measure the angle-of-arrival (AoA) and elevation-of-angle (EoA) of the signal from the target to the BLE receivers and utilize them to achieve accurate 3-D localization. Specifically, we develop an offset elimination algorithm and data stitching algorithm, utilizing the second-order cone (SoC) programming to obtain accurate angle estimates. Then, the simulated annealing algorithm (SAA) is used to search for the target location in 3-D space. Finally, we develop the prototype system with commercial off-the-shelf (COTS) BLE sensors and conduct extensive experiment measurements in real-world scenarios. The results demonstrate that the proposed system can achieve a median localization error of 36 cm in the 2-D plane and 48 cm in the 3-D space.

Towards a better indoor positioning system: A location estimation process using artificial neural networks based on a semi-interpolated database

Location-Based Service (LBS) has been widely deployed. One of the key components of LBS is the positioning algorithm. For outdoor environments, the Global Positioning System (GPS) has been used as the default positioning scheme. However, GPS requires the line of sight to the satellites. When the line of sight is blocked, GPS simply stops working. To tackle the problem with GPS, varied WiFi-based positioning schemes have been proposed. However, the positioning precision of the existing methods is not satisfactory. In this paper, we present a high-precision positioning scheme named Deep Learning based Positioning (DLP). Technically, DLP utilizes both Received Signal Strength Indicator (RSSI) and Channel State Information (CSI) to improve the positioning precision. In detail, a deep neural network is used to model the received RSSI and CSI measurements, which leads to satisfactory positioning accuracy. Our experimental results acquired from a large-scale testbed indicate that DLP outperforms the existing positioning schemes in terms of positioning precision.

With the development of mobile internet, requirements of positioning accuracy for the LBS (Location Based Service) are becoming more and more higher. The LBS is based on the position of each mobile device. So, it requires a proper acquisition of accurate user's indoor position. Thus indoor positioning technology and its accuracy is crucial for various LBS. In general, RSSI (Received Signal Strength Indicator) measurements are used to obtain the position information of mobile unit under WLAN environment. However, indoor positioning error increases as multiple AP's configurations are becoming more complex. To overcome this problem, an enhanced indoor localization method by AP (Access Point) selection criteria adopting DOP (Dilution of Precision) is proposed.

Received Signal Strength Indicator (RSSI) is used in indoor positioning for measuring object distance to the base station. However, acquiring accurate RSSI values is challenging because wireless interference factors, such as multipath decline interference, make RSSI values of the same object fluctuate over time. Therefore, instead of a single RSSI, RSSI acquisition will collect a set of RSSI values from which the most moderate RSSI is derived. For this purpose, we propose an Enhanced Gaussian Mixture Model (EGMM) to derive a more precise RSSI for improving indoor positioning accuracy. EGMM enhances Gaussian Mixture Model (GMM) by applying Akaike information criterion (AIC) to determine the best K value for GMM to divide RSSI values into K sets representing signals from different paths. Then, EGMM identifies the most appropriate set of RSSI values to derive a more precise RSSI and thus improves the accuracy of indoor positioning. Our EGMM solution performs well in an open indoor space. The experiment is conducted with iBeacon devices, and the average error distance of EGMM is about 64% of those generated by existing Gaussian filtering. The average positioning error of EGMM is about 0.48 meter, which is adequate to indoor positioning accuracy.

Increasing the location accuracy of the Indoor Positioning System (IPS) is an important research area in localization.Utilizing mobile beacons in IPS environment has made localization more accurate and cost-effective.This paper proposes an Filtered RSSI and Beacon Weight Approach (FRBW) based on improved Received Signal Strength Indicator (RSSI) values using a Kalman filter.This algorithm takes both the distance and improved RSSI measurements between beacon nodes into consideration.Kalman filter applied on the RSSI measurements that eliminate noise of the signal and then applied on FRBW positioning algorithm.The proposed algorithm was applied using eight beacons.The results show that this FRBW approach has better positioning accuracy and minimum location error, and can be applied in IoT applications in smart city.

An indoor localization system in wireless sensor networks has become a hot development area. Received signal strength indicator (RSSI)-based localization is a promising technique since it requires a relatively low configuration, battery power and easy control. However, the received signal strength is influenced by channel interference and propagation environments. This characteristic affects channel stability and location accuracy in RSSI-based localization. As a result, we propose a novel indoor localization system consisting of a preprocessing method and a post-processing method. To improve channel stability, the pre-processing method selects an optimal channel in terms of the smallest distance error. The optimal channel is less affected to IEEE 802.11. To develop location accuracy, the post-processing method performs maximum likelihood estimation-based location tracking scheme considering the reliability of the RSSI value measurement. We apply three methods to the existing MLE to improve the reliability of the RSSI value. By using this indoor localization system with preprocessing and post-processing, the location error can be reduced. We also proved the performance of the indoor localization system by conducting experiments in a real indoor environment.

Indoor localization can provide a number of different services such as location-aware advertisement, indoor navigation and automating different appliances based on the user location. A number of different techniques such as time-difference- of-arrival, angle-of-arrival, time-of-flight, and received signal strength indicator (RSSI) have been used to provide Location Based Services (LBS). RSSI is one of the widely used methods as it is cost efficient and easy to implement. However, RSSI's performance is limited by multipath fading and indoor noise. Particle Filter (PF) is an accurate Bayesian Filtering algorithm that can improve the performance of RSSI-based indoor localization. However, PF is not able to satisfy the high accuracy requirement (possibly 10cm) of indoor localization. In this paper, we present Particle Filter-Extended Kalman Filter (PFEKF) cascaded algorithm that combines PF and EKF in series to reduce the impact of multipath effects and noise on the RSSI. Our experimental results show that PFEKF improves the localization accuracy by 31.3% and 33.9% in 3D and 2D environments respectively when compared with using only a PF.

Since GPS (Global Positioning System) cannot meet accuracy requirements indoors, indoor Location-Based Services (LBSs) have become increasingly important. BLE (Bluetooth Low Energy) offers cost and accuracy advantages. Typically, the position fingerprinting method is used for indoor positioning. However, due to irregular reflection and absorption, the indoor environment introduces various offsets in Bluetooth RSSI (Received Signal Strength Indicator). This study analyzed the RSSI space and proposed a pre-processing workflow to improve position estimation accuracy by correcting offsets in RSSI space for BLE fingerprinting methods using machine learning. Experiments performed using different position estimation methods showed that the corrected data achieved a 6% improvement over the filter-only result. This study also evaluated the effects of different pre-processing and post-processing filters on positioning accuracy. Experiments were also conducted using a published dataset and showed similar results.

The device-free indoor localization (DFIL) research is gaining attention due to the popularity of location-based service (LBS)-based advertisement. In DFIL, a user or an object does not need to bring any device to be localized. In this paper, we propose the Wi-Fi-based DFIL and the random forest algorithm for the fingerprint-based technique. The simple parameter commonly used in indoor localization is the Received Signal Strength Indicator (RSSI). We apply the fingerprint technique because of its reliability to handle the RSSI fluctuation and time-varying effect in a static indoor environment. We conducted an actual measurement campaign to observe the DFIL's implementation visibility. The DFIL system works by comparing the database fingerprint in an empty open office with the database in which a person is inside the measurement area without bringing any devices. Thus, we have the device-free RSSI database for fingerprint technique from both empty rooms and RSSI affected by a person inside the room. We validated the random forest algorithm results by comparing them with the k-nearest neighbor (kNN) and artificial neural network (ANN). The results show that our proposed system's accuracy is better than kNN and ANN with a mean error of 0.63 m than kNN with 0.80 m and ANN with 1.01 m. Meanwhile, the precision of the random forest is 0.63 m, whereas kNN and ANN are 0.67 m and 0.80 m, showing that the random forest performed better. We concluded that our simple DFIL system is visible to apply with acceptable accuracy performance.

Nowadays, location awareness becomes the key to numerous Internet of Things (IoT) applications. Among the various methods for indoor localisation, received signal strength indicator (RSSI)-based fingerprinting attracts massive attention. However, the RSSI fingerprinting method is susceptible to lower accuracies because of the disturbance triggered by various factors from the indoors that influence the link quality of radio signals. Localisation using body-mounted wearable devices introduces an additional source of error when calculating the RSSI, leading to the deterioration of localisation performance. The broad aim of this study is to mitigate the user’s body shadowing effect on RSSI to improve localisation accuracy. Firstly, this study examines the effect of the user’s body on RSSI. Then, an angle estimation method is proposed by leveraging the concept of landmark. For precise identification of landmarks, an inertial measurement unit (IMU)-aided decision tree-based motion mode classifier is implemented. After that, a compensation model is proposed to correct the RSSI. Finally, the unknown location is estimated using the nearest neighbour method. Results demonstrated that the proposed system can significantly improve the localisation accuracy, where a median localisation accuracy of 1.46 m is achieved after compensating the body effect, which is 2.68 m before the compensation using the classical K-nearest neighbour method. Moreover, the proposed system noticeably outperformed others when comparing its performance with two other related works. The median accuracy is further improved to 0.74 m by applying a proposed weighted K-nearest neighbour algorithm.

As WiFi technology becomes more widespread and integrated, precise location tracking within complex indoor environments is gaining significance in contemporary public spaces.Nevertheless, challenges persist in indoor scenarios, including issues such as noise and multi-path effects stemming from the degradation of the Received Signal Strength Indicator (RSSI). Additionally, obstacles causing signal shading contribute to a decrease in the accuracy of indoor location tracking. Within this paper, we introduce an innovative indoor localization algorithm termed Vision Transformer Indoor Localization (VTIL). This algorithmleverages RSSI and Vision-Transformer (ViT) technologies to enhance indoor positioning accuracy. Initially, the RSSI fingerprints undergo normalization by scaling them to the maximum and minimum values. To mitigate the impact of noise and irrelevant features, the Principal Component Analysis (PCA) algorithmis then employed for effective feature extraction.Secondly, the RSSI fingerprint library is converted into an RSSI gray image library. Then the RSSI gray image is divided into several small blocks, and the position-coding input is performed in the form of a sequence. The ViT model divides the weight ratio of each block in the RSSI image to alleviate the impact of multi-path effects. According to the experimental results using public datasets, our approach achieves a noteworthy 37.26% reduction in the average distance estimation error when compared to existing indoor fingerprint localization algorithms.

In recent years, indoor and outdoor positioning technology for the blind has attracted much more attention. The outdoor positioning technology has relatively matured. However, three-dimensional indoor positioning technology is facing many problems. Due to low positioning accuracy as well as slow positioning speed, there is no ideal implementation system at present. Light Fidelity (LiFi) technology is a new wireless transmission technology that uses the visible light spectrum, such as the light emitted by a light bulb, to transmit data. It transmits signals through the changing light of LED lights. When LED lights are properly laid out in the building, not only the function of lighting but also that of transmitting information are met at the same time. It is a good way to solve indoor positioning problems. This article studies an indoor positioning glasses for blind based on the LiFi technology. Different from other indoor positioning technologies such as ultrasound and wireless fidelity (WiFi), the design of indoor positioning glasses for the blind will propose new ideas of three-dimensional indoor positioning problems for the blind.

Wireless Localization based on Received Signal Strength Indication (WL-RSSI) consists of predicting the localization of a particular device given the radio signals it receives. WL-RSSI methods are suitable for specific scenarios where Global Positioning System (GPS) is unstable or unavailable, such as indoor localization. Developing more efficient WL-RSSI methods is necessary to supplement GPS localization in such applications. Feedforward neural network trained by hybrid Particle swarm optimization and Gravitational search algorithm (FPG) is an optimization strategy that aims at better exploring the network weight-space when compared to methods such as Backpropagation (BP). Feedforward neural network trained by hybrid Particle swarm optimization and Gravitational search algorithm (FPG) is a kind of machine learning model with better exploring ability in the solution search space compared with conventional neural network training methods such as Backpropagation (BP). This article investigates a method to solve the slow convergence problem of conventional FPG and further improve its performance. Extreme Learning Machines (ELMs) are used to pre-train initial particles of the FPG (EP-FPG). This article also presents the application of EP-FPG to classification and regression WL-RSSI problems. Experimental results demonstrate that the proposed EP-FPG performs better on WL-RSSI problems than conventional FPG and BP.

Indoor localization is an important issue in wireless sensor networks for a very large number of applications. Recently, localization techniques based on the received signal strength indicator (RSSI) have been widely used due to their simple and low cost implementation. In this paper, we propose an algorithm for localization in wireless sensor networks based on radio-location fingerprinting and kernel methods. The proposed method is compared to another well-known localization algorithm in the case of real data collected in an indoor environment where RSSI measures are affected by noise and other interferences.