RIS-Aided LDM System: A New Prototype in Broadcasting System

Reconfigurable Intelligent Surface (RIS) is an emerging technology that can improve the spectrum and energy efficiency of next-generation wireless networks. However, attaining accurate channel state information (CSI) for the cascaded RIS channel is particularly challenging. Imperfect CSI is a major bottleneck to achieving the spectral efficiency benefit of RIS-assisted networks. Rate splitting (RS), a promising multiple access technology, has been shown to be able to achieve an improved spectrum efficiency and be robust to channel uncertainties. This paper investigates the interplay between RIS and RS by considering a RIS-assisted RS beamforming problem. Active beamforming at the base station (BS) and passive beamforming at the RIS are jointly considered to maximize the minimum user rate under both the perfect CSI case and the imperfect CSI case. A block coordinate descent (BCD) algorithm is developed to solve this non-convex problem. Compared with the conventional semi-definite relaxation (SDR) approach, the proposed method does not require that the covariance matrix of the common beamforming vector be rank-one. Moreover, we present theoretical results to help reveal the impact of the system parameters and explain the performance gain resulting from the integration of RIS and RS. Extensive simulation results are also provided to show that RIS-assisted RS can improve the max-min rate performance significantly compared with conventional multiple access technologies, such as non-orthogonal multiple access (NOMA) and space division multiple access (SDMA) with/without RIS, especially in overloaded systems. With the proposed method, RS shows great potential in combating realistic CSI errors in RIS-assisted networks.

In this paper, we explore the use of reconfigurable intelligent surface (RIS) in unmanned aerial vehicle (UAV) based multiuser downlink communications, where a flying UAV serves multiple single antenna users through multiple RISs mounted on various buildings. More specifically, we consider the selection of RISs based on the outdated and imperfect channel state information (CSI) of the composite UAV-RIS-User channels at the UAV. After selection process, the UAV communicates to the user via the selected RISs and also with the direct link. Particularly, we derive an infinite series based expression for selection probability of RISs under both the outdated and imperfect CSI of composite channels based selection scheme. We also derive the statistical distribution of instantaneously received signal-to-noise ratio (SNR) under outdated and imperfect CSI conditions of both the direct and composite links at the user. Next, using the derived statistics, we analyze the network’s performance in terms of the average coverage probability (ACP) and average bit error rate (ABER) over the complete UAV flight time. Moreover, we discuss the behavior of ACP and ABER for very small and very large values of UAV transmit power, respectively. It is depicted through numerical results that selecting more RISs from a group of small-sized RISs may not be as advantageous as selecting fewer RISs from a group of large-sized RISs. Moreover, we also demonstrate the effect of several system parameters such as number of RIS reflecting elements, number of selected RISs, the severity of UAV-RIS and RIS-User links, and the severity of imperfect and outdated CSI on the network’s performance. The analytical results are corroborated with Monte-Carlo simulations.

Reconfigurable Intelligent Surface (RIS) has become an important transmission technology for improving the capacity of next-generation wireless communication networks and has wide applications in the field of vehicle networks. However, due to RIS’s low capacity for signal processing, obtaining perfect channel state information (CSI) poses significant challenges. Hence, this paper explores a vehicle communication system enhanced with RIS under conditions of imperfect CSI. Specifically, our aim is to minimize the transmission power while ensuring that each vehicle user can still meet the quality of service requirements even in the worst-case scenario. To tackle this complex problem, we first transform the optimization problem into several semidefinite programming (SDP) sub-problems by using the S-Procedure and finally tackle them using the convex–concave procedure (CCP) and the alternating optimization algorithms. The numerical results validate the algorithm’s effectiveness and reveal the impact of channel errors on network performance.

Reconfigurable intelligent surfaces (RIS) have emerged as a promising approach to enhance the secrecy performance of wireless networks from a physical layer security perspective. However, its effectiveness critically depends on the availability of accurate instantaneous channel state information (CSI) at the RIS controller. This work evaluates the impact of outdated CSI on the secrecy performance of a multiple RIS-aided wireless network. To this end, a closed-form expression for the secrecy outage probability (SOP) is derived assuming the availability of an outdated CSI at the RIS controller. The obtained results demonstrate the network’s secrecy degradation level due to the CSI outdatedness, while the increase in the number of RISs can compensate for such a secrecy loss. For instance, incorporating three RISs improves the SOP by two orders of magnitude with respect to a single RIS for 25% of CSI outdatedness. Furthermore, the results reveal that, under specific scenarios of several channel outdatedness, a baseline single RIS with a perfect CSI can outperform multiple RISs with outdated CSI. These findings highlight a critical limitation in incorporating multiple RISs in a wireless network with severe channel aging, requiring the increase of the RISs size or the number of RISs to combat its effect.

Reconfigurable intelligent surfaces (RISs) represent a pioneering technology to realize smart electromagnetic environments by reshaping the wireless channel. Jointly designing the transceiver and RIS relies on the channel state information (CSI), whose feedback has not been investigated in multi-RIS-assisted frequency division duplexing systems. In this study, the limited feedback of the RIS-assisted wireless channel is examined by capitalizing on the ability of the RIS in channel customization. By configuring the phase shifters of the surfaces using statistical CSI, we customize a sparse channel in rich-scattering environments, which significantly reduces the feedback overhead in designing the transceiver and RISs. Since the channel is customized in terms of singular value decomposition (SVD) with full-rank, the optimal SVD transceiver can be approached without a matrix decomposition and feeding back the complete channel parameters. The theoretical spectral efficiency (SE) loss of the proposed transceiver and RIS design is derived by considering the limited CSI quantization. To minimize the SE loss, a bit partitioning algorithm that splits the limited number of bits to quantize the CSI is developed. Extensive numerical results show that the channel customization-based transceiver with reduced CSI can achieve satisfactory performance compared with the optimal transceiver with full CSI. Given the limited number of feedback bits, the bit partitioning algorithm can minimize the SE loss by adaptively allocating bits to quantize the channel parameters.

Symbiotic radio (SR) is a promising technology to support ultralow-power or even zero-power Internet of Things (IoT) devices in the sixth-generation mobile networks. In this article, we propose an energy-aware symbiotic transmission in a reconfigurable intelligent surface (RIS) enhanced SR system, in which an IoT network embeds its own data passively over cellular downlink signals by backscattering. The base station (BS) serves multiple cellular users (CUs) through time division multiple access (TDMA) and each IoT device is associated with one CU. We formulate the BS’s energy minimization problem subject to the constraints of the minimum amounts of transmission bits required by IoT devices and CUs. The user association, the active transmit beamforming at the BS, the passive reflecting beamforming at the RIS, and the frame division policy are jointly optimized. The formulated problem is a mixed integer nonlinear programming (MINLP) problem, which is NP-hard and nonconvex. We decouple the problem and solve the subproblems alternatively. First, we design a many-to-one swap-matching-based algorithm to solve the user association subproblem. Then, we develop a joint cooperative beamforming and time allocation optimization algorithm based on the alternative optimization (AO) and semidefinite relaxation (SDR) techniques. Simulation results show that the proposed joint user association and cooperative beamforming algorithm brings significant performance gain in reducing the energy consumption of the BS with fast convergence speed compared with other schemes.

Reconfigurable intelligent surface (RIS) partitioning offers a strategic solution for serving multiple users equipment (UEs) simultaneously in blockage-prone wireless environments, leveraging multiple-input multiple-output (MIMO) and non-orthogonal multiple access (NOMA) technologies within the millimeter-wave (mmWave) spectrum. However, deploying RIS partitioning (RISP) in MIMONOMA is hindered by the exacerbated computational complexity involved in acquiring accurate channel state information (CSI). This paper proposes a novel learning framework based on multi-agent deep reinforcement learning (MA-DRL) that maximizes the sum rate of the RISP-aided MIMO-NOMA system without requiring UEs’ CSI. The proposed framework jointly optimizes RIS phase shifts, number of RIS partitions, UEs beamformers, and NOMA power allocation (PA), transforming the challenge into a high-dimensional combinatorial optimization problem. The MA-DRL algorithm integrates double deep Q networks (DDQN) and deep deterministic policy gradient (DDPG) agents, where each UE acts as a DDQN agent optimizing its beamformer, while the RIS serves as a DDPG agent handling partitioning and power control. An experimental testbed is developed to gather real-world data for training and evaluation. Results show that the MA-DRL algorithm closely approaches optimal performance, trailing the exhaustive search by only 8%, while reducing complexity by 95% and improving the sum rate by an average of 18% compared to traditional full RIS setups.

With the wide application of unmanned aerial vehicles (UAVs) in the military and civilian fields, the physical layer security of UAV-assisted communication has attracted more and more attention in recent years. Reconfigurable intelligent surface (RIS) is a revolutionizing and promising technology that can improve spectrum efficiency through intelligent reconfiguration of the propagation environment. In this paper, we investigate the physical layer security of RIS and UAV-assisted communication systems. Specifically, we consider the scenario of multiple eavesdroppers wiretapping the communication between the base station and the legitimate user and propose a secure mechanism that deploys the RIS on a dynamic UAV for security assistance. In order to maximize the average secrecy rate of the system, we propose a joint optimization problem of joint UAV flight trajectory, RIS transmit phase shift, and base station transmit power. Since the proposed problem is non-convex, it is difficult to solve it directly, so we propose a joint optimization algorithm based on block coordinate descent and successive convex optimization techniques. Simulation results verify the effectiveness of our proposed design in improving the secrecy performance of the considered system.

Energy efficiency (EE) is one of the most important metrics for the beyond fifth generation (B5G) and the future sixth generation (6G) wireless networks. Reconfigurable intelligent surface (RIS) has been widely focused on EE enhancement for wireless networks because it is power-saving, programmable, and easy to be deployed. However, RIS is generally passive and thus difficult to obtain corresponding full channel state information (CSI), which severely impacts the EE enhancement of RIS-assisted wireless communications. To solve this problem, in this paper we propose the new single-active-antenna combined RIS transmitter structure, which can replace traditional multiple antennas to reduce hardware cost and power consumption. Based on the single-active-antenna combined RIS structure, we develop the Dumb RIS-Assisted Random Beamforming (Darb)-based Joint RIS-Elements and Transmit-power optimizAtion (Jeta) scheme, where dumb RIS randomly changes its phase shift according to isotropic distribution only depending on the CSI feedback from users to RIS-assisted transmitter. Then, we jointly design the number of RIS elements and optimize the transmit power to maximize the EE of RIS-assisted wireless communications. Simulation results show that compared with the traditional multi-antenna system, our developed Darb-based-Jeta scheme can significantly increase the EE without the full CSI.

Active reconfigurable intelligent surface (RIS) emerges as an effective technique to resist the double-fading attenuation of passive RIS. By embedding with power harvesting function, it further evolves to zero-power active RIS, which can effectively enhance the flexibility of RIS deployment without external power demand. Nevertheless, existing works neglected the inherent difficulty of channel estimation (CE) for RIS-assisted systems, and the discrete phase shift constraint in practical deployment. In this paper we design a new element-wise RIS architecture and propose a distributed location-aided transmission scheme with low complexity to enhance the reflected gain for channel state information (CSI)-limited RIS-assisted near-field communications. Specifically, the new element-wise RIS provides dynamic element selection capability with low hardware resources. Based on Fresnel diffraction theory, we construct the mapping from locations in space-domain to phase distributions of waves in phase-domain and reveal the priority of elements for harvesting and reflecting. Then, the distributed beamforming design with the phase of determine-then-align is proposed, where the estimation overhead reduction stems from exempted requirements of RIS-associated CE at base station (BS). The asymptotic analysis indicates that the proposed scheme can achieve the optimal gain with a fixed proportion of reflective elements when RIS is large, followed by simulations to verify its superiority to other protocols.

In this paper, we study the uplink transmission scheme and channel estimation design for reconfigurable intelligent surfaces (RIS)-aided orthogonal time frequency space (OTFS) systems in high-mobility scenarios. To this end, we first propose an efficient and reliable transmission scheme which utilizes the delay-Doppler information in OTFS to facilitate the configuration of RIS. Specifically, the proposed scheme exploits the estimated delay and Doppler shifts of the cascaded channel to sense the channel parameters, and the sensing parameters are then used for RIS passive beamforming. It is noteworthy that we estimate the channel state information (CSI) by employing only one OTFS frame and configure the RIS based on the predicted channel parameters, leading to substantially reduced channel training overhead and more real-time RIS configuration. To obtain the essential information for channel information sensing, we then propose a low-complexity algorithm which determines the Doppler and delay shifts of the channel between the user and RIS based on linear systems and the mapping relationship of the delay-Doppler pairs, respectively. With the delay-Doppler information in hand, a user localization algorithm constructed by the least square (LS) and a channel tracking method relying on extended Kalman filter (EKF) are then presented to obtain the spatial angle information. By making use of the channel parameters acquired at the base station (BS), the RIS reflection vector is designed to maximize the achievable rate. The results obtained from the simulation experiments affirm the efficacy of the proposed scheme, thereby confirming its capability to attain efficient communications under high Doppler channels.

A reconfigurable intelligent surface (RIS) can shape the radio propagation environment by virtue of changing the impinging electromagnetic waves towards any desired directions, thus, breaking the general Snell’s reflection law. However, the optimal control of the RIS requires perfect channel state information (CSI) of the individual channels that link the base station (BS) and the mobile station (MS) to each other via the RIS. Thereby super-resolution channel (parameter) estimation needs to be efficiently conducted at the BS or MS with CSI feedback to the RIS controller. In this paper, we adopt a two-stage channel estimation scheme for RIS-aided millimeter wave (mmWave) MIMO systems without a direct BS-MS channel, using atomic norm minimization to sequentially estimate the channel parameters, i.e., angular parameters, angle differences, and the products of propagation path gains. We evaluate the mean square error of the parameter estimates, the RIS gains, the average effective spectrum efficiency bound, and average squared distance between the designed beamforming and combining vectors and the optimal ones. The results demonstrate that the proposed scheme achieves super-resolution estimation compared to the existing benchmark schemes, thus offering promising performance in the subsequent data transmission phase.

Reconfigurable intelligent surface (RIS) has the potential to significantly enhance the network secure transmission performance by reconfiguring the wireless propagation environment. However, due to the passive nature of eavesdroppers and the cascaded channel brought by the RIS, the eavesdroppers’ channel state information is imperfect at the base station. Under channel uncertainty, the optimal phase-shift, power allocation, and transmission rate design for massive antennas and reflecting elements secure transmission are challenging to solve due to the outage probabilistic constraint with coupled variables. To fill this gap, this paper formulates a problem of energy-efficient secure transmission design with the probabilistic outage constraint. By leveraging the exponential distribution property of the received signal power, the stochastic resource allocation is equivalently transformed into a deterministic one, and the secure energy efficiency maximization problem can be iteratively solved via low complexity first-order algorithms under the alternating maximization (AM) framework. However, due to the nonsmooth problem, the convergence of the objective function value and nature of the converged solution under AM iteration are uncertain. Therefore, the convergence properties with respect to the objective function value and sequence of solutions are further established. Simulation results corroborate the convergence results of the first-order algorithms and show that the proposed algorithm achieves identical performance to the conventional method but saves at least two orders of magnitude in computation time. Moreover, the resultant RIS aided secure transmission significantly improves the energy efficiency compared to baseline schemes of random phase-shift, fixed phase-shift, and RIS ignoring CSI uncertainty.

Reconfigurable Intelligent Surfaces (RIS) hold the promise of significantly improving coverage, as well as spectral and energy efficiency in wireless communication systems. Techniques based on RIS form a key technology for 6G systems, attracting a significant research interest. An important issue in RIS technology is Channel State Information (CSI), which is much more difficult to acquire in such systems. This work considers a Differential Space-Time Modulation (DSTM) technique integrated with Differential Reflecting Modulation (DRM) termed DRM-DSTM. Such a scheme does not require CSI, while providing error rate gains. The DSTM scheme is based on unitary group codes. We first consider uncoded DRM for RIS to serve as a reference point. Next we provide an overview of DSTM and outline the procedures for its integration with DRM. We consider the issue of reflecting patter selection in such systems, and explore the extension of both the original DRM and the coded DRM-DSTM scheme to a larger number of RIS reflecting patterns <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">K</i>. Furthermore we provide tables of cyclic and dicyclic codes for <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">K</i>' = 2, 3, 4 suitable for DRM-DSTM. Encoding and decoding complexities are studied as well. Extensives Monte-Carlo simulation results over quasi-static Rayleigh fading channels confirm the effectiveness of the DRM-DSTM coded scheme, illustrating its advantages over uncoded DRM with proper system parameters.

Reconfigurable Intelligent Surface (RIS) has been considered as a promising technology for 6G networks, which is capable of directionally reflecting the incident signal by adjusting phase shift of its reflecting elements, and thus to achieve beamforming. In this paper, we investigate the potential of employing RIS in dual-functional radar-communication (DFRC) vehicular networks. Considering a vehicle-to-infrastructure (V2I) communication in non-line-of-sight(N-LoS) scenario, where RIS is deployed to establish sensing and communication links, we propose a scheme to optimize the beamforming based on the detected vehicle position for the sake of avoiding the relatively large channel estimation overhead. More specifically, we build a codebook to maintain the optimal phase shift of RIS corresponding to each candidate angle offline, which can be used for detecting the direction of vehicle in N-LoS scenario. In addition, the position-based channel state information (CSI) is introduced and used for maximize the downlink rate. Simulation results show that by deploying RIS in DFRC vehicular networks, the base station can detect the vehicle position in N-LoS scenario and provide it with reliable communication rates without channel estimation.