Robust adaptive orthogonal frequency division multiplexing integrated radar and communications waveform design under clutter circumstances

In this paper, a novel radar waveform phase function design is presented that constructs a radar waveform that spectrally manuevers around in-band co-channel interference (CCI) from active communications users that are co-channel with the radar system. The design approach treats the CCI problem as the physical interpretable problem of optical refraction where the time-frequency (TF) signature of the radar waveform is made to be analogous to a light ray propagating from a start time and position (frequency) to an end time and position (frequency) and will naturally accelerate through the CCI as if the equivalent light ray accelerated in through different mediums (with an index of refraction related to CCI power spectral density (PSD)). Using the Euler-Lagrange equations, we design the radar phase function that is used to modulate a constant modulus (CM) waveform. The radar waveform design will generally result in a nonlinear-frequency modulated (NLFM) waveform that provides improved signal-to-interference-plus-noise-ratio (SINR) on a potential target in the presence of CCI leading to improved probability of detection performance. We provide theoretical analysis and simulation results for the proposed waveform design.

In this paper, a low probability of intercepting radar waveform design method is proposed. The time-frequency image of the designed radar waveform is agile and random. Its time-frequency image is more complex than a chirp. This paper first determines the number of sub-pulses in a single pulse. Then find random points on the time-frequency plane of unit time and unit bandwidth. Finally, the randomly generated multi-component LFM signal is searched, and the waveform that meets the constraints, such as peak sidelobe level and main lobe width, is selected. Simulation results show that the peak sidelobe level of the waveform designed in this paper can reach as low as −23.44 dB, which is lower than the traditional chirp signal (-13.86 dB). The price is that the waveforms generated in this paper have a certain main lobe broadening compared to the traditional LFM. The simulation and analysis results show that the waveform designed in this paper is an effective low probability of intercepting radar waveform.

In this paper, the problem of adaptive waveform design for cognitive radar (CR) in signal-dependent interference, as well as additive channel noise is investigated. With constraints on waveform energy and bandwidth, a flexible waveform optimization method taking both detection and range resolution into account is proposed. Unlike existing optimal waveforms designed by a single design criterion, waveform designed by the proposed method can be updated according to the environment information fed back by receiver and radar performance demands simultaneously at each cycle of CR. Simulations are conducted to illustrate that CR with the proposed waveform performs better than traditional radar system with fixed waveform, and offers more practical and flexible.

With the development of high speed digital processor and solid state power electronics, more flexible waveforms become feasible to achieve by modern radar systems. In fact, the choice of waveforms has a significant impact on the performance of radar systems. In this paper, we review the conventional radar waveform design as well as explore the new generation of waveforms via different theoretical methods, including the most recent wavelet based waveforms. It is shown that the waveform design supports the radar advancement for more intelligent and divergent applications. In this endeavor, radar waveform design plays an even more important role in reaching specific purposes, in addition to range and speed detections, and further improves the performance and application scopes of radar systems.

This study investigates the problem of low probability of intercept (LPI)-based distributed multiple-input multiple-output (MIMO) radar waveform design against barrage jamming in signal-dependent clutter and coloured noise. Given the priori knowledge of the extended target impulse response, signal-dependent clutter, barrage jamming signals and coloured noise, the LPI-based scheme for optimal radar waveform design is proposed to minimise the total power consumption of the MIMO radar system by optimising the transmitted waveforms of different transmitters with a predetermined mutual information (MI) constraint for target characterisation performance. Firstly, the MI between the received echoes from the target at each receiver and the target impulse response is derived as a practical metric to characterise the parameter estimation performance of a target. Then, the LPI-based distributed MIMO radar waveform design strategy is developed. The resulting radar waveform optimisation problem is convex and solved analytically, whose solutions represent the optimum power allocation for each transmitter in the MIMO radar system. With the aid of numerical simulations, it is illustrated that to minimise the total transmission power, the optimal waveform should match with the target, clutter, jamming and coloured noise. In addition, it is also demonstrated that the LPI performance of the MIMO radar system can be significantly improved by employing the proposed radar waveform design scheme.

This paper focuses on the radar waveform design in a spectrally crowded environment. A spectral constraint is forced on the radar waveform to ensure spectral compatibility with the overlayed licensed electromagnetic radiators. The waveform design problem is formulated by maximizing the output signal-to-interference-plus-noise ratio (SINR) under the energy, similarity and spectral constraints. Inspired by the feasibility and high-quality solution properties of feasible point pursuit successive convex approximation (FPP-SCA), we develop an efficient al-gorithm framework based on FPP-SCA to solve the waveform design problem. Numerical results demonstrate the effectiveness of the proposed algorithm.

Radar performance is strongly dependent on the transmitted waveform and its parameters which must be adapted to the surrounding environment, radar mission, goal, and task. Waveform diversity is a relatively new paradigm involving a continuous variation and adaptation of the transmitted signal to dynamically optimize the radar performance and fulfill the more and more stressing requirements. In this context, cognitive radar waveform design in spectrally dense environments is a very challenging and topical problem. This paper deals with the synthesis of signals optimizing radar capabilities while satisfying spectral compatibility constraints. Specifically, the design of radar waveforms, sharing appealing features and ensuring spectral coexistence with other Radio Frequency (RF) systems, is introduced and discussed according to a rigorous framework.

In order to improve the estimation performance of radar system, previous studies on radar waveform design mostly focused on maximizing the mutual information between the target and the echo to design the transmitted waveform. However, these studies neglect the existence of jammer in the actual electromagnetic environment, so this paper introduces a jammer to design the corresponding jamming waveforms according to whether there are signal-related clutter or not, which weakens the estimation performance of radar system. Simulation results show that the energy allocation strategies of the two jamming waveforms are different.

n/a

The problem of adaptive orthogonal frequency division multiplexing (OFDM) waveform design in the case of stochastic extended targets in the presence of strong and nonstationary interferences is an essential part of a cognitive radar system. In this article, a new approach is developed based on maximizing the mutual information between the random target impulse response and the received echoes with respect to the transmitted waveform. We use the advantage of OFDM signals and present an adaptive structure to match the complex weights of OFDM signal with the radar scene for making complete use of the transmission power. The interference reflections are utilized rather than eliminating them to design the weights of the transmitted OFDM signal. The optimization algorithm for designing transmitted signals is based on adaptive learning whose essential information is obtained by a feedback between receiver and transmitter. This feedback includes essential target and interference characteristics which extracted from the reflected echoes. Based on changes in interference features, the weights of the transmitted OFDM signal on each subcarrier are designed and transmitted in the next coherent processing interval. Experimental results reveal that the proposed approach achieves a higher rate of performance compared to nonadaptive waveform design approaches.

The key abilities of the cognitive radar system include learning new knowledge about its surroundings, critical decision-making, and adaptation to a constantly changing environment. Among others, cognitive radar aims to achieve optimal radar resource management and maximize target detection performance. Radar systems often have to operate in strongly interfered environments. This work investigates the novel research direction of cognitive radar system design based on artificial intelligence (AI) cognitive architectures. Namely, the integration of a coherent radar model with Soar cognitive architecture has been developed. This work describes in detail the sensorimotor subsystem, which represents radar signal processing algorithms and waveform design. The AI subsystem comprising of the long-term and short-term memories of the Soar architecture was also characterized. Cognitive memories are designed to represent radar environment state and solve signal-to-noise-ratio (SNR) maximization problem. Using computer simulations it has been shown that the proposed system improved target detection performance in comparison to traditional radar system.

We present a novel approach to the problem of dual-functional radar and communication (DFRC) waveform design with adjustable peak-to-average power ratio (PAPR), while minimizing the multi-user communication interference and maintaining a similarity constraint towards a radar chirp signal. The approach is applicable to generic radar chirp signals and for different constellation sizes. We formulate the waveform design problem as a non convex optimization problem. As a solution, we adopt the alternating direction method of multipliers (ADMM), hence iterating towards a stable waveform for both radar and communication purposes. Additionally, we prove convergence of the proposed method and analyze its computational complexity. Moreover, we offer an extended version of the method to cope with imperfect channel state information (CSI). Finally, we demonstrate its superior performance through simulations, in comparison to state-of-the-art radar-communication waveform designs.

Simple pulsed radar is limited in range sensitivity by the average radiation power and, in range resolution by the pulse length. The design of any radar always involves a compromise between the two constraints. Waveform design aims to seek an appropriate harmony that best suits the relevant application. The pulse compression theory has been introduced in order to get a high range resolution as well as a good detection probability. One of the basic types of pulse compression is binary phase coding which encodes the transmitted pulse with information that is compressed (decoded) in the receiver of the radar. The study of the peak sidelobe level (PSL) binary sequences occurs as a classical problem of signal design for digital communication and, in equivalent guise, in analytic number theory. It has also become a notorious problem of combinatorial optimization. For years mathematicians, engineers, physicists and chemists have sought a systematic way to construct long binary sequences with low PSL. In this Chapter, we describe pulse compression technique in radar waveform design. In order to make the presentation self-contained, we start by providing a short summary of waveform design and an introduction to principle behind pulse compression by compiling the basic tools required for analyzing and comparing different radar signals. After that, we talk about binary sequence, its desired properties and general types of methods for finding and generating such waveforms. We keep on by an overview and introducing the existing methods and search routine done. We conclude the chapter with a brief survey of the results exhibited yet for low autocorrelation binary sequences. We mention a table of complete results presented and also introduce a histogram to unscramble them visually and predict the future.

We consider the problem of waveform design for Multiple-Input Multiple-Output (MIMO) radar in the presence of signal-dependent interference embedded in white Gaussian disturbance. We present two sequential optimization procedures to maximize the Signal to Interference plus Noise Ratio (SINR), accounting for a constant modulus constraint as well as a similarity constraint involving a known radar waveform with some desired properties (e.g., in terms of pulse compression and ambiguity). The presented sequential optimization algorithms, based on a relaxation method, yield solutions with good accuracy. Their computational complexity is linear in the number of iterations and trials in the randomized procedure and polynomial in the receive filter length. Finally, we evaluate the proposed techniques, by considering their SINR performance, beam pattern as well as pulse compression property, via numerical simulations.

The problems of multiple-input multiple-output (MIMO) radar adaptive waveform design in additive white Gaussian noise channels and multitarget recognition based on sequential likelihood ratio test are jointly addressed in this paper. Two information-theoretic waveform design strategies, namely, the optimal waveform for maximizing the mutual information (MI) between the extended target impulse response and the target echoes and the optimal waveform for maximizing the Kullback-Leibler (KL) divergence (or relative entropy), are applied in the multitarget recognition application. For multitarget case, two adaptive waveform design methods for all possible targets based on the current knowledge of each hypothesis are proposed. Method 1 is the probability weighted waveform method. Method 2 is the probability weighted target signature method. The optimal waveform is transmitted and adaptively changed such that a decision is made based on the likelihood ratio after several illuminations. Numerical results demonstrate that the best waveform is the KL divergence-based optimal waveform using Method 1 as it has the lowest average illumination number and the highest correct decision rate for target recognition. By optimally designing and adaptively changing the transmitted waveform, the average number of illuminations required for multitarget recognition can be much reduced.