Robust fuzzy-model-based controller for uncertain systems

In this second part of the paper on the analysis and design of uncertain fuzzy control systems, we present a controller design method for a class of uncertain fuzzy control systems. This class of systems can be represented by the discrete-time uncertain fuzzy models discussed in Part I. Since this model representation considers system uncertainties and system disturbance, the controller design problem for this kind of model becomes a H/sub /spl infin// control problem for a nonlinear uncertain system. A new stability analysis and control system design approach are then developed for this kind of uncertain fuzzy model. Furthermore, a constructive algorithm is developed to obtain the H/sub /spl infin// feedback control law.

Over the past two decades, there has been a rapidly growing interest in approximating a nonlinear system by a Takagi-Sugeno (T-S) fuzzy model (Takagi & Sugeno, 1985). In general, this model is represented by using a set of fuzzy rules to describe a global nonlinear system in terms of a set of local linear models which are smoothly connected by fuzzy membership functions. Based on the T-S fuzzy model, recently, various fuzzy controllers have been developed under the so-called parallel-distributed compensation (PDC) scheme (in which each control rule is distributively designed for the corresponding rule of a T-S fuzzy model) and have been widely and successfully applied in fields ranging from aerospace to process control. The reason is because the fuzzy model-based control method provides a natural, simple and effective design approach to complement other nonlinear control techniques that require special and rather involved knowledge. Below are listed the main features of T-S model-based fuzzy control method: 1. It does not require severe structural assumptions on the plant model. 2. It preserves well-understood linear intuition. 3. It is naturally compatible with decompositions of the overall control problem. The decompositions are typically not hierarchical, and the interactions of sub-problems are captured by physical variables that are typically state variables in a more complete model of the overall system. 4. It enables control systems to respond rapidly to changing operating conditions. For this reason, it is important that the selected physical variables reflect changes in plant dynamics as operating conditions change. In fact, the T-S model-based fuzzy control method (of divide and conquer type) constructs a nonlinear controller, with certain required dynamic properties, by combining, in some sense, the members of appropriate family of linear time-invariant controllers. Here, nonlinear control design task is broken into a number of linear sub-problems, which enable linear design methods to be applied to nonlinear problems. Within the general framework of the T-S fuzzy model-based control method, a flurry of research activities have quickly yielded many important results on the design of fuzzy control systems by means of the following Lyapunov function approaches: 1. Common quadratic Lyapunov function approach (Tanaka & Sugeno, 1992; Tanaka et al, 1996; Wang et al, 1996; Cao & Frank, 2000; Assawinchaichote, 2004).

This paper presents new stability conditions and LMI (linear matrix inequality) based designs for both continuous and discrete fuzzy control systems. First, Takagi and Sugeno's fuzzy models and some stability results are recalled. To design fuzzy control systems, nonlinear systems are represented by Takagi-Sugeno fuzzy models. The concept of parallel distributed compensation is employed to design fuzzy controllers from the Takagi-Sugeno fuzzy models. New stability conditions are obtained by relaxing the stability conditions derived in previous papers. The stability analysis of the feedback system is reduced to a problem of finding a common Lyapunov function for a set of linear matrix inequalities. Convex optimization techniques involving LMIs are utilized to find a common Lyapunov function. A procedure to design the fuzzy controller is constructed using the parallel distributed compensation and the relaxed stability conditions. Some stability issues are remarked. A simple example demonstrates the effects of the derived stability conditions.

The paper discusses the controller design for a class of fuzzy systems. A new method is developed for the design of fuzzy control systems. The basic idea of this new method is to represent the fuzzy system in a family of local state space models, and then to construct a global controller by considering each local state feedback controller. It is shown that this controller guarantees global stability of the closed loop fuzzy system. The issue of a state observer for the fuzzy system is also addressed. A numerical example is given for demonstration of the performance of the method. >

This paper presents new stability conditions satisfying decay rate for both continuous and discrete fuzzy control systems. Linear matrix inequality (LMI) based designs for decay rate are also considered using the concept of parallel distributed compensation (PDC). To design fuzzy control systems, nonlinear systems are represented by Takagi-Sugeno fuzzy models. The PDC is employed to design fuzzy controllers from the Takagi-Sugeno fuzzy models. The stability analysis discussed here is reduced to a problem of finding a common Lyapunov function for a set of LMIs. Convex optimization techniques involving LMIs are utilized to find a common Lyapunov function and stable feedback gains satisfying decay rate. A simple example demonstrates the utility of the LMI-based designs proposed in this paper.

A robustness design of fuzzy control is proposed in this paper to overcome the effect of modeling error between nonlinear system and Takagi-Sugeno (T-S) fuzzy model. In terms of Lyapunov's direct method, a stability criterion is derived to guarantee the asymptotic stability of nonlinear interconnected systems. Based on the decentralized control scheme and this criterion, a set of model-based fuzzy controllers is then synthesized via the technique of parallel distributed compensation (PDC) to stabilize the nonlinear interconnected systems. Finally, an example is given to illustrate the concepts discussed throughout the paper.

Takagi-Sugeno (T-S) fuzzy model is a system described by a set of fuzzy if-then rules which give local linear representations of the underlying nonlinear system. Usually, a fuzzy control law is constructed by a set of controllers for each local linear representation to carry out the control of a T-S fuzzy system. While, simultaneous control addresses the stability and performance of multiple plants under a single feedback controller. In this paper, simultaneous linear control for nonlinear uncertain systems described by general T-S fuzzy model is considered. A procedure for simultaneous control of T-S fuzzy systems with parametric uncertainties is presented, by which robust reliability method is adopted to deal with uncertainties. Simultaneously linear controller design for an uncertain T-S fuzzy system is carried out by solving a problem of robust reliability based optimization, in which, both the robustness with respect to uncertainties and the control cost can be taken into account simultaneously. It is demonstrated by numerical simulation of the chaotic Lorenz system control that the presented method is effective and feasible.

This paper reviews the development of fuzzy systems and the problem of time delay control in nonlinear systems. Based on this review, a fuzzy Lyapunov method defined in fuzzy blending quadratic Lyapunov functions is proposed from which to derive stability conditions. In the controller procedure, a parallel distributed compensation (PDC) scheme is utilized to construct a global fuzzy logic controller (FLC) by blending all linear local state feedback controllers. Furthermore, the multiple time-delay interconnected systems are considered in the nonlinear fuzzy systems. Key words: Interconnected systems, fuzzy Lyapunov method, linear matrix inequality.

In this paper, a class of fuzzy stochastic control systems with random delays is examined. The fuzzy rule base used consists of a collection of r fuzzy IF-THEN rules defined as a function of the conditional variable. The method of theory of invariant cones is used to design a class of local fuzzy control law. A verifiable sufficient condition for stochastic stability of the fuzzy stochastic delay differential equation is given.

This paper proposes a novel adaptive synchronization approach for a class of nonlinear large-scale systems via T-S fuzzy model. It is known that the practical large-scale systems are very complicated with nonlinear coupling strength between every two subsystems, thus the classical linear control methods are invalid for them. To overcome this deficiency, we employ the T-S fuzzy model in this paper. Firstly, the local linearization approach is utilized to preprocess the nonlinear large-scale systems, and then, according to the universal approximation property of TS fuzzy model, a new system model is established. Secondly, the fuzzy adaptive synchronization controllers are designed by using Parallel Distributed Compensation technique and the corresponding stability analysis is presented through Lyapunov technique. In addition, a new criterion, under which the proposed control scheme can be transformed into pinning control and save unnecessary costs, is also given. Finally, a numerical simulation example is presented to demonstrate the effectiveness of our proposed approach.

This paper addresses the issue of tracking the output of an activated sludge process using fuzzy integral control. First, the dynamics of the nonlinear process are modeled with a dynamic state space fuzzy model integrating the effect of external disturbances, and then an additional integral state of the output tracking error is introduced to obtain an augmented Takagi-Sugeno (TS) fuzzy model. The TS fuzzy model is able to describe the dynamics of complex nonlinear systems with an excellent degree of accuracy. It is formulated by fuzzy if-then rules which can give local linear representation of the overall nonlinear system. Second, the design of the fuzzy integral control is performed, in which the state feedback gains are obtained by solving linear matrix inequalities (LMI). The objective is to ensure trajectory tracking of an activated sludge process (ASP) by controlling two key variables: the substrate concentration and the level of dissolved oxygen. To assess the performance of the proposed control strategy, a comparative analysis is carried out with a gain scheduling PI (GS-PI) controller. Simulation results are provided to illustrate the effectiveness of the proposed approach. Where, the fuzzy integral control reduces the high energy consumption in water treatment plants.

Delay-dependent T–S fuzzy control for nonlinear interconnected systems: Using dithers as auxiliaries

We show how frequency domain design procedures can be effectively used in nonlinear fuzzy control systems. For this purpose, theoretical justifications of the approach discussed here are provided to show that solid notions from nonlinear system and control theory can be successfully applied in the fuzzy control domain. The methodology proposed is very simple, but powerful, effective and practical. In addition, it supports systematic control system design and stability analysis in the frequency domain for systems described by mathematical, linguistic or experimental models. Several case studies are included to illustrate the usefulness of frequency response in conventional fuzzy control systems analysis and design.

A Sum of Squares Approach to Guaranteed Cost Control of Polynomial Discrete Fuzzy Systems

Gravitational search algorithm-based design of fuzzy control systems with a reduced parametric sensitivity