Robust synthesis for linear parameter varying systems using integral quadratic constraints

Stability analysis and stabilization of LPV systems with jumps and (piecewise) differentiable parameters using continuous and sampled-data controllers

In this paper, we consider the fault Detection and isolation (FDI) problem for faulty linear parameter-varying (LPV) systems subject to disturbances and propose a observer-based solution by using multiobjective optimization techniques. To simply the design process, a general faulty LPV system will be constructed from standard LPV description by converting actuator/system component faults into sensor faults at first. Then a bank of LPV FDI filters will be designed to identify each fault. Each FDI filter could generate a residual signal to track individual fault with minimum error and suppressing the effects of disturbances and other fault signals. The design of FDI filters will be formulated as multiobjective optimization problems in terms of linear matrix inequalities (LMIs) and can be solved efficiently. Two numerical examples are also presented to demonstrate the proposed fault detection and isolation approach on both LPV and LTI systems.

International audience

This paper investigates the guaranteed cost control problem for a class of linear parameter-varying (LPV) systems with Markovian switching under partly known transition rates. A key point of this work relaxes Markovian jump systems whose subsystems are described by linear time-invariant (LTI) dynamics to LPV systems with Markovian switching whose subsystems are described by LPV dynamics. Meanwhile, the special assumption of completely known transition rates is relaxed to more general case that transition rates are partly known. Moreover, the proposed control technique for the LPV systems with Markovian switching is used to solve the guaranteed cost control problem of turbofan-engine. Firstly, a guaranteed cost controller is designed, and the design problem can be reduced to a set of linear matrix inequalities (LMIs) feasibility problem. Then, a turbofan-engine example is given to demonstrate the applicability of the main results.

In recent years, automatic crane device is used in scenes of handling of objects at warehouse. Stacker crane is an example of automatic crane device. It has a Traveling body, a Forking mechanism and a Lifting mechanism. A Traveling body makes a Lifting body move along the horizontal axis. A Lifting mechanism makes a Forking mechanism move along vertical axis. It is able to carry a load into rack or takes out a load from the rack by using Forking mechanism. But, in action of Forking mechanism, vibration of Forking mechanism and variation of characteristic frequency of Forking mechanism causes several problems. In this study, the stacker crane is described in LPV (Linear Parameter Varying) system. And, using DMM (Dual Model Matching) method provides the LPV controller that can adjust plant that explained by LPV system. The results of simulation show the effectiveness of LPV controller when DMM controlled is applied.

Linear parameter-varying (LPV) systems are usually described in either state-space or input-output form. When analyzing system equivalence between different representations it appears that the time-shifted versions of the scheduling signal (dynamic dependence) need to be taken into account. Therefore, representations used previously to define and specify LPV systems are not equal in terms of dynamics. In order to construct a parametrization-free description of LPV systems that overcomes these difficulties, a behavioral approach is introduced that serves as a basis for specifying system theoretic properties. LPV systems are defined as the collection of trajectories of system variables (like inputs and outputs) and scheduling variables. LPV kernel, input-output, and state-space system representations are introduced with appropriate equivalence transformations.

Input Estimation from Sparse Measurements in LPV Systems and Isotopic Ratios in Polar Firns

Linear Parameter Varying (LPV) system shows preferable performance in dealing with NonLinear (NL) systems and systems with time-varying parameters, based on a kind of wheel-legged robot with two-wheel and balance as Inverted Pendulum, this paper proposes a gain scheduling control method for balancing using LPV system on Equivalent model with Center Of Mass (COM). In order to ensure the stability and responsive of the system with possible values for all variable parameters, Higher Order Singular Value Decomposition (HOSVD) is used for constructing polytopic LPV system, then the robust controller is designed for the vertex systems forthputting Linear Matrix Inequality (LMI) approach, and the gain scheduling controller for global system is obtained by convex combination of vertex LTI systems. The simulation results show that the system can achieve the expected indicators.

A New Approach to Robust MPC Design for LPV Systems in Input-Output Form

It is challenging to design a controller for a wind turbine system because of its nonlinear time-varying dynamics. To solve this issue, linear parameter-varying (LPV) control theory has been applied in the recent ten years to deal with nonlinear and wind-speed-dependent dynamics. Before applying the LPV control method, it is required to transform the nonlinear model of the system to an LPV model. The main objectives of this research are to model a 5-MW Reference Wind Turbine for Offshore System as an LPV system, develop a nonlinear wind turbine simulator using MATLAB/Simulink to validate the LPV model, and conduct a preliminary study on LPV control design to test the simulator, which will be used in the future research for applying different LPV control techniques, such as switching LPV control, LPV antiwindup control, etc.

This paper presents a new dilated linear matrix inequality (LMI) representation to design a state feedback controller and a dynamic feedforward disturbance compensator for linear parameter-varying (LPV) systems. The improved LMIs are convex and finite-dimensional without any iterative approach. The designs are based on a new proposed equivalent bounded real lemma (BRL) by means of matrix dilation for LPV systems and uncertain linear systems under time-varying parametric uncertainties (TVPUs). This dilated BRL provides lower conservative results than existing methods in terms of robust stability. Accordingly, a dynamic disturbance compensator is designed in addition to a state feedback controller. This paper mainly focuses on the design of compensators against disturbances in addition to the design of state feedback controllers. The dynamic matrices of the compensator change with the time-varying parameters of the LPV or uncertain system during operation, assuming that the disturbances and the parameters are measurable or observable. The compensator can be designed to attenuate the disturbances/noises or to improve reference tracking. Finally, numerical and simulation outcomes are presented to prove both the effectiveness and lower conservativeness of the proposed LMIs.

this paper investigates the problem of robust gain-scheduled static output feedback (SOF) controller for a class of uncertain linear parameter varying systems (LPVSs). An uncertain LPVS is described by an interconnection of a nominal LPVS which is solely dependent on the measurable parameters, and a block structured uncertainty. For designing a H∞ gain-scheduled SOF controller as well as performing the stability analysis, the proposed method uses integral quadratic constraints (IQCs) to derive the linear matrix inequalities (LMIs) without any constraints on nominal system matrices. The performance and effectiveness of the proposed method are demonstrated based on an example.

We introduce a controller design methodology for nonlinear systems via complementary Linear Parameter Varying (LPV) controller and observer structures. The recently developed method is able to control physiological systems even with complex nonlinearities — without using Linear Matrix Inequalities (LMI) or other techniques requiring iterations. The developed method is based on the classical state feedback theorems, matrix similarity theorems and supplementary controller and observer structure which efficiently uses the mathematical properties of the parameter space of the LPV system. The main benefits of the proposed method is that the controller design does not require mathematical tools needing iteration thus high computational capacity. We used a nonlinear compartmental model in order to demonstrate the application of the method. The results showed that the developed complementary LPV controller and observer structures perform well on both the LPV systems and the original nonlinear system as well.

A feedback control law is derived analytically for a linear parameter varying (LPV) discrete-time system with bounded rates of parameter variations subject to input-saturated constraints in this paper. As the uncertain region of such a LPV system in the future changes corresponding to the parameters which can be predicted in the future stage due to the information on the parameters value, magnitude bounds and the variation rate bounds, the control law is presented in the paper by solving a min-max MPC problem based on a dynamic programming viewpoint. By exploiting the dynamic nature of the min-max optimal problem and showing the convexity of the dynamic cost-to-go, the intrinsic structure of the feedback control law has been obtained which is proved to be efficient for an LPV system with bounded rates of parameter variations by an example at last.

This paper presents a nonparametric identification method for state-space linear parameter-varying (LPV) models using a modified support vector machine (SVM) approach. While most LPV identification schemes in the state-space form fall under the general category of parametric methods, regularization-based SVMs provide a viable alternative to model scheduling dependencies, without the need of specifying the dependency structure and with an attractive bias-variance trade-off. In this paper, a solution is proposed for nonparametric identification of LPV state-space models in terms of least-squares SVMs (LS-SVM) and is then extended in a way that the proposed estimation is robust to errors in the noise model estimation. The so-called instrumental variables (IV) method has been used in linear system identification for quite some time, and has recently seen its application in the identification of both nonlinear and LPV systems in the input-output (IO) form. The IV method reduces the bias in estimated LPV state-space models in case the noise model is not estimated properly or is unknown. In the proposed method of this paper, the attractive bias-variance trade-off properties of LS-SVMs are combined with statistical properties of IV-based methods to give robust estimates of the functional dependencies. Numerical examples are provided to compare the performances of the proposed IV-based technique with the LS-SVM-based LPV model identification methods.