SAI: Safety Application Identifier Algorithm at MAC Layer for Vehicular Safety Message Dissemination Over LTE VANET Networks

The recent wireless communication networks rely on the new technology named Long Term Evolution (LTE) to offer high data rate real-time (RT) traffic with better Quality of Service (QoS) for the increasing demand of customer requirement. LTE provide low latency for real-time services with high throughput, with the help of two-level packet retransmission. Hybrid Automatic Repeat Request (HARQ) retransmission at the Medium Access Control (MAC) layer of LTE networks achieves error-free data transmission. The performance of the LTE networks mainly depends on how effectively this HARQ adopted in the latest communication standard, Universal Mobile Telecommunication System (UMTS). The major challenge in LTE is to balance QoS and fairness among the users. Hence, it is very essential to design a down link scheduling scheme to get the expected service quality to the customers and to utilize the system resources efficiently. This paper provides a comprehensive literature review of LTE MAC layer and six types of QoS/Channel-aware downlink scheduling algorithms designed for this purpose. The contributions of this paper are to identify the gap of knowledge in the downlink scheduling procedure and to point out the future research direction. Based on the comparative study of algorithms taken for the review, this paper is concluded that the EXP Rule scheduler is most suited for LTE networks due to its characteristics of less Packet Loss Ratio (PLR), less Packet Delay (PD), high throughput, fairness and spectral efficiency.

With the onset of multimedia applications, Quality of Service (QoS) in 802.11-based wireless ad hoc networks has been an essential area to look into. Standard wireless protocols such as IEEE 802.11b and IEEE 802.11e have been deemed unsuitable for multimedia traffic transmission in an ad hoc (multihop) network environment due to the unique network characteristics. As an ad hoc network is infrastructureless and distributed in nature, it gives rise to several challenges in QoS provisioning. In this thesis, we focus on the research of three key areas on QoS in ad hoc networks namely, buffer management in the medium access control (MAC) layer, cross-layer design and flow admission control. Firstly, we study MAC layer buffer management in the IEEE 802.11e protocol. The IEEE 802.11e MAC protocol provides QoS for multimedia traffic by probabilistic priority queueing. Ad hoc networks tend to generate a large volume of network control packets for route maintenance and these control packets are typically queued in the highest priority queue. As a result, higher priority control traffic is always being served, consuming most of the bandwidth and results in poor network performance for data traffic. We examine this problem and propose a dynamic buffer management scheme to mitigate it. By setting different threshold levels in different priority queues, we allow lower priority data traffic to be served when the higher priority control traffic is deemed to be excessive. Simulation of our proposed scheme has shown that our approach yielded better network performance compared to the standard protocol in terms of packet delivery ratio and average delay. Secondly, we study the cross-layer interaction between the MAC and Network layers to identify its impact on QoS. We select the IEEE 802.11e MAC protocol and Ad-hoc On Demand Distance Vector (AODV) routing protocol in our study since they are standardized protocols for wireless networks. In IEEE 802.11e MAC protocol, lower priority traffic has a higher probability of being blocked. Hence, the MAC layer will inform the Network layer of a broken link through the link notification function. In this case, AODV will re-route the paths that traverse this link. As a result, higher priority traffic which shares the same link as the lower priority traffic will undergo the same re-routing procedures. We termed this phenomenon path correlation effect. Under high traffic load, the path correlation effect will be more intense and hence degrade the QoS of higher priority traffic. To break the path correlation effect, we propose a cross-layer design called the Bundled Virtual Circuit (BVC). Our proposed BVC scheme not only addresses the path correlation issues, but also provides priority treatment from the Network layer to the MAC layer. Through our simulations, our proposed cross-layer design approach is proven to provide better network performance than the 802.11e/AODV protocols in terms of packet delivery ratio and delay. Finally, we examine flow admission control at the routing layer in ad hoc networks. Standard routing protocols such as AODV performs routing on a shortest path basis. In the presence of multiple routes, hotspots are likely to form among the intermediate nodes and thus lead to network congestion. In addition, existing routes are not well-protected from the introduction of new routes. We propose a flow admission control algorithm to be used with AODV. Our algorithm allows routes to be created through available bandwidth and congestion estimation. During the route discovery phase, each node will be gauged on its estimated available bandwidth and its backlog of packets in the MAC buffer. If a node does not have sufficient bandwidth, or has too many backlogged packets compared to the requested flow rate, it will not participate in the route discovery process. From simulations, our new scheme is able to provide better network performance than the standard AODV protocol in terms of delay. Our work in this thesis focuses on QoS provisioning in ad hoc networks from the MAC and network layer perspectives. By studying the network characteristics and protocols’ behavior, we investigate the various problems of providing QoS in an ad hoc network environment and propose three different schemes to improve the QoS provisioning at the MAC and network layers. We believe that our work is able to provide some insights to the research area on QoS in ad hoc networks.

With the soaring demands for high speed data communication, as well as transmission of various types of services with different requirements over cellular networks, having a decent radio resource management is considered vital in Long Term Evolution (LTE) system. In particular, satisfying the quality of service (QoS) requirements of different applications is one of the key challenges of radio resource management that needs to be dealt by the LTE system. In this paper, we propose a cross-layer design scheme that jointly optimizes three different layers of wireless protocol stack, namely application, Medium Access Control, and physical layer. The cross-layer optimization framework provides efficient allocation of wireless resources across different types of applications (i.e., real-time and non real-time) run by different users to maximize network resource utilization and user-perceived QoS, or also known as Quality of Experience (QoE). Here, Mean Opinion Score is used as a unified QoE metric that indicates the user-perceived quality for real-time or multimedia services notably video applications. Along with multimedia services, the proposed framework also takes care of non-real-time traffic by ensuring certain level of fairness. Our simulation, applied to scenarios where users simultaneously run different types of applications, confirms that the proposed QoE-oriented cross-layer framework leads to significant improvement in terms of maximizing user-perceived quality as well as maintaining fairness among users.

For the influence of Internet, 802.11 lacks the definition over the MAC (medium access control) layer, user-data are switched via upper protocols and the switching point is located in the network layer. This redundant architecture has shortcomings on efficiency and is not propitious to guarantee QoS (quality of service). In this paper, we propose a novel user-data switching mechanism in the lower layer, viz. the MAC layer in 802.11. This mechanism modifies the traditional finite state machine, the header format of user-data and the communication primitives of MAC layer to achieve the goal of reducing user-data plane. Our simulations show this user-data mechanism can better the relay efficiency and improve the QoS.

Over the past few years, mobile networks have emerged as a promising approach for future mobile IP applications. With limited frequency resources, designing an effective MAC (Medium Access Control) protocol is a hot challenge. IEEE 802.11b/g/a/n networks are currently the most popular wireless LAN products on the market [1]. The conventional IEEE 802.11b and 802.11g/a specification provide up to 11 and 54 Mbps data rates, respectively. However, the MAC protocol that they are based upon is the same and employs a CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) protocol with binary exponential back-off. IEEE 802.11 DCF (Distributed Coordination Function) is the de facto MAC protocol for wireless LAN because of its simplicity and robustness [2,3]. Therefore, considerable research efforts have been put on the investigation of the DCF performance over wireless LAN [2]. With the successful deployment of IEEE 802.11a/b/g wireless LAN and the increasing demand for real-time applications over wireless, the IEEE 802.11n Working Group standardized a new MAC and PHY (Physical) layer specification to increase the bit rate to be up to 600 Mbps [3]. The throughput performance at the MAC layer can be improved by aggregating several frames before transmission [3]. Frame aggregation not only reduces the transmission time for preamble and frame headers, but also reduces the waiting time during CSMA/CA random backoff period for successive frame transmissions. The frame aggregation can be performed within different sub-layers. In 802.11n, frame aggregation can be performed either by A-MPDU (MAC Protocol Data Unit Aggregation) or A-MSDU (MAC Service Data Unit Aggregation). Although frame aggregation can increase the throughput at the MAC layer under ideal channel conditions, a larger aggregated frame will cause each station to wait longer before its next chance for channel access. Under errorprone channels, corrupting a large aggregated frame may waste a long period of channel time and lead to a lower MAC efficiency [4]. On the other hand, wireless LAN mobile stations that are defined as the stations that access the LAN while in motion are considered in this chapter. The previous paper analyzed the IEEE 802.11b/g/n MAC performance for wireless LAN with fixed stations, not for wireless LAN with mobile stations [5, 6, 7, 8, 9, 10]. On the contrary, Xi Yong [11] and Ha Cheol Lee [12] analyzed the MAC performance for IEEE 802.11 wireless LAN with mobile stations, but considered only IEEE 802.11 and 802.11g/a wireless LAN specification. So, this chapter summarizes all the reference papers and analyzes the IEEE 802.11b/g/a/n MAC performance for wireless LAN with fixed and mobile stations. In other words, we will present the analytical evaluation of saturation

There has been keen interest in the literature recently on the IEEE wireless metropolitan area network (MAN) developed within IEEE 802.16. Through the use of flexible physical layer features and medium access control (MAC) layer mechanisms, this system can be used to deliver broadband voice and data into areas that may have a wide range of population densities, cell radii, propagation environments, and quality of service (QoS) requirements. The physical layer provides flexibilities of time or frequency domain duplexing, multiple bandwidths, adjustable subchannelization, scalable OFDM formats, adaptive coded modulation, and advanced antenna system. The IEEE 802.16 MAC layer offers a connection-oriented service to upper layers of the protocol stack. The QoS of each connection takes one of four levels: constant bit rate grant, real time polling, non-real-time polling, and best effort. The MAC layer also offers packing, fragmentation and ARQ. The MAC privacy sublayer performs authentication, key exchange and encryption of MAC packet data units. The MAC convergence sublayers at the top of the MAC enable Ethernet, ATM, TDM voice and IP (Internet Protocol) services to be offered. This presentation will endeavor to provide a high level overview of the system. It will discuss, from an information theoretic point of view, the key enablers of the system

Coexistence research for LTE systems is indispensable to ensure that the time division duplex (TDD) Long Term evolution (LTE) system can coexist with the frequency division duplex (FDD) LTE system operating at the adjacent frequency band within the same geographical area. Previous studies on this topic only focus on the throughput loss of the victim system from the data channel viewpoint. In this paper, the performance of control channels (CCHs) in the typical coexistence scenario is investigated, since the performance of communication systems is largely dependent on the quality of CCHs. The CCHs' interferences are analyzed in detail, including the coexistence issue for CCHs, Co-Channel Interference (CCI) analysis, and Adjacent Channel Interference (ACI) on CCHs. The simulation results indicate that the ACI generated by the Base Station (BS) of collocated LTE system degrades the performance of the uplink (UL) CCHs of the victim LTE system significantly.

The fifth-generation (5G) mobile network is facing severe challenges of the traffic demand surge and spectrum scarcity. To improve the network capacity and data rate, the deployment of Long Term Evolution (LTE) cellular system on unlicensed band is considered as one of the promising solutions. But the interference problem among LTE and WiFi system on the same unlicensed band hinders the deployment process, which is a critical issue unsolved for network operators. Therefore, a novel channel access scheme integrating the energy detection scheme and back-off mechanism in LTE system has been proposed in this paper, to minimize the interference to WiFi system. The throughput of both LTE and WiFi systems and the optimal sensing time and back-off time are theoretically analyzed with proofs. Furthermore, an efficient adaptive reconfiguration strategy of access parameters is proposed based on the channel occupancy cognition results. Simulation results verify that the proposed channel access scheme with optimal back-off time can double the throughput of WiFi system when coexisting with LTE system on unlicensed band.

This paper presents a System on a Chip (SoC) Field-Programmable Gate Array (FPGA) implementation for Media Access Control (MAC) layer of a fast industrial Wireless Local Area Network (iWLAN) protocol, which is used to control industrial robots in factory automation environments. This protocol is a potential technique for industrial wireless communication system by using the Low overhead Packet Division Multiple Access (PDMA) scheme controlled by MAC layer. In our previous research, the MAC layer hardware was implemented and tested on simulation software, but the SoC design for the MAC layer has not been implemented and real tested on the FPGA. In this paper, we have successfully implemented the SoC system for MAC layer of this high-speed wireless communication protocol on the FPGA.

In order to coexist with the WiFi systems in the unlicensed spectrum, Long Term Evolution (LTE) networks can utilize periodically configured transmission gaps. In this paper, considering a time division duplex (TDD)-LTE system, we propose a Q-Learning based dynamic duty cycle selection technique for configuring LTE transmission gaps, so that a satisfactory throughput is maintained both for LTE and WiFi systems. By explicitly taking the impact of IEEE 802.11n beacon transmission mechanism into account, we evaluate the coexistence performance of WiFi and LTE using the proposed technique. Simulation results show that the proposed approach can enhance the overall capacity performance by 19% and WiFi capacity performance by 77%, hence enabling effective coexistence of LTE and WiFi systems in the unlicensed band.

The paper proposes a bandwidth allocation scheme to be applied at the interface between upper layers (IP, in this paper) and Medium Access Control (MAC) layer over IEEE 802.16 protocol stack. The aim is to optimally tune the resource allocation to match objective QoS (Quality of Service) requirements. Traffic flows characterized by different performance requirements at the IP layer are conveyed to the IEEE 802.16 MAC layer. This process leads to the need for providing the necessary bandwidth at the MAC layer so that the traffic flow can receive the requested QoS.The proposed control algorithm is based on real measures processed by a neural network and it is studied within the framework of optimal bandwidth allocation and Call Admission Control in the presence of statistically heterogeneous flows. Specific implementation details are provided to match the application of the control algorithm by using the existing features of 802.16 request–grant protocol acting at MAC layer. The performance evaluation reported in the paper shows the quick reaction of the bandwidth allocation scheme to traffic variations and the advantage provided in the number of accepted calls. Copyright © 2006 John Wiley & Sons, Ltd.

The wireless environment is built everywhere, especially IEEE 802.11 WLANs. More users use wireless network for searching information in Internets, TV program streaming, and video/voice conference. The packets include not only traditional data but also interactive multimedia data. There is an extension to IEEE 802.11 standards called IEEE 802.11e, improving the QoS capabilities on WLANs. This protocol enhances QoS data as above applications and features. The contribution, Cross-Layer Adaptive Video Prioritization (CAVP), in this thesis paper is divided into two parts. First, it provides MAC-Layer adaptive prioritization (MAP) to prioritize the packet which has the information of video frames at the Medium Access Control (MAC) Layer of IEEE 802.11e. In IEEE 802.11e, the priority of packets is very important, and it affects the order of received packets and the probability of successfully-received packet. The method to prioritize packets is estimating the access time of each access category (AC) for the arrived packet and putting the packet into the AC which has the minimal access time. Second, Video Frame Prioritization (VFP) prioritizes the video packet. Because the importance of video frames is different, we set the initial priority at Application Layer by choosing the maximal PSNR-difference frame as the highest priority frame. The maximal PSNR-difference frame critically influences the overall video sequences. These two parts of our contribution can greatly improve the quality of video streaming. The cross-layer design, CAVP, involves MAC Layer and Application Layer. The information of a packet arrived at MAC Layer is gotten from Application Layer. The benefit of cross-layer design is effectively using the information of different layers and combining their feature. In simulations, we use the popular simulator ns-2 as the experiment platform. We design several scenarios to show that our cross-layer design improves the quality of video streaming. The result shows that our cross-layer design proposal not only greatly increases PSNR of video but also improves the video in vision after the wireless transmission.

n/a

In the previous chapter, we have examined medium access control (MAC) layer issues in cooperative networks and have introduced several cooperative MAC protocols to help exploit cooperative advantages from the MAC layer. In this chapter, we take a further look at other higher-layer issues in cooperative networks, including quality-of-service (QoS), routing, and security. First, we examine the advantages of cooperation in terms of enhancing the QoS for networks that support, e.g., multimedia applications. The concept of effective capacity is utilized to characterize the QoS and conditions are provided on when a certain QoS requirement can be met. Secondly, we introduce the role of cooperative transmissions in network routing problems.

최근 무선 인터넷 수요의 증가와 더불어 IEEE 802.11 WLAN의 표준화 작업도 활발히 진행 중이다. 고속처리량을 위한 IEEE 802.11n의 연구 동향은 크게 두 가지로 MAC 계층에서 패킷 간의 Aggregation을 통하여 시스템 처리량을 높인 결과와PHY 계층에서 MIMO 시스템을 적용하여 데이터 전송속도를 높인 결과로 정리될 수 있다. 그러나 아직까지 MAC 계층과 PHY 계층의 연동을 고려하여 IEEE 802.11n의 성능 분석을 보인 결과는 발표되지 않았다. 본 논문에서는 IEEE 802.11n 시스템에서 MAC 계층과 PHY 계층의 연동을 고려하여 성능을 분석한다. MAC 계층에서의 A-MPDU 기법과 PGY 계층에서 MIMO 방식을 적용한다. 결과적으로 기존의 방식에 비해 데이터 전송속도의 증가와 처리량이 향상되었음을 보인다. 또한, MAC과 PRY의 연동을 고려하여 현실성 있는 시뮬레이터인 NS-2를 사용하기로 한다. IEEE 802.11 WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Study trends of IEEE 802.11n for high throughput show two aspects, enhanced system throughput using aggregation among packets in MAC(Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PRY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PRY connection. This paper adapts A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer and MIMO in PRY layer for IEEE 802.11n system. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use NS-2(Network Simulator-2) considering MAC and PRY connection for reality.