ScBlkCom: An Integrated Compression Algorithm for Single-Cell RNA Sequencing Data

In a single-cell RNA-seq (scRNA-seq) data set, a high proportion of missing values (or an excessive number of zeroes) are frequently observed. For the related follow-up tasks, such as clustering analysis and differential expression analysis, a data set without missing values is generally required. Many imputation approaches have been proposed for this purpose. Multiple imputation (MI) is a well-established approach to address possible biases in a follow-up analysis result based on one-time imputed data. There is a lack of investigation on this in the analysis of scRNA-seq data. In this study, we have investigated how to efficiently apply the MI approach to the clustering analysis and the differential expression analysis of scRNA-seq data. We proposed an MI procedure for clustering analysis and an MI procedure for differential expression analysis. To demonstrate the improvements achieved by MI in clustering analysis and differential expression analysis of scRNA-seq data, we analyzed three well-known scRNA-seq data sets. scIGANs, an scRNA-seq imputation method based on the generative adversarial networks (GANs), has been recently proposed for scRNA-seq data imputation. Multiple randomly imputed data sets can be conveniently generated by this method. We implemented our MI procedures based on scIGANs. We demonstrated that MI yielded improved performances on the clustering analysis and differential expression analysis results. Our applications to experimental scRNA-seq data illustrated the advantages of MI over one-time imputation of missing values in scRNA-seq data.

MLSpatial: A machine-learning method to reconstruct the spatial distribution of cells from scRNA-seq by extracting spatial features

The excessive amount of zeros in single-cell RNA-seq (scRNA-seq) data includes 'real' zeros due to the on-off nature of gene transcription in single cells and 'dropout' zeros due to technical reasons. Existing differential expression (DE) analysis methods cannot distinguish these two types of zeros. We developed an R package DEsingle which employed Zero-Inflated Negative Binomial model to estimate the proportion of real and dropout zeros and to define and detect three types of DE genes in scRNA-seq data with higher accuracy. The R package DEsingle is freely available at Bioconductor (https://bioconductor.org/packages/DEsingle). Supplementary data are available at Bioinformatics online.

Assessing similarity is highly important for bioinformatics algorithms to determine correlations between biological information. A common problem is that similarity can appear by chance, particularly for low expressed entities. This is especially relevant in single-cell RNA-seq (scRNA-seq) data because read counts are much lower compared to bulk RNA-seq. Recently, a Bayesian correlation scheme that assigns low similarity to genes that have low confidence expression estimates has been proposed to assess similarity for bulk RNA-seq. Our goal is to extend the properties of the Bayesian correlation in scRNA-seq data by considering three ways to compute similarity. First, we compute the similarity of pairs of genes over all cells. Second, we identify specific cell populations and compute the correlation in those populations. Third, we compute the similarity of pairs of genes over all clusters, by considering the total mRNA expression. We demonstrate that Bayesian correlations are more reproducible than Pearson correlations. Compared to Pearson correlations, Bayesian correlations have a smaller dependence on the number of input cells. We show that the Bayesian correlation algorithm assigns high similarity values to genes with a biological relevance in a specific population. We conclude that Bayesian correlation is a robust similarity measure in scRNA-seq data.

Recently, single-cell RNA-seq (scRNA-seq) data have been used to study cellular communication. Most bioinformatics methods infer only the intercellular signaling between groups of cells, mainly exploiting ligand-receptor expression levels. Only few methods consider the entire intercellular + intracellular signaling, mainly inferring lists/networks of signaling involved genes. Here, we present scSeqComm, a computational method to identify and quantify the evidence of ongoing intercellular and intracellular signaling from scRNA-seq data, and at the same time providing a functional characterization of the inferred cellular communication. The possibility to quantify the evidence of ongoing communication assists the prioritization of the results, while the combined evidence of both intercellular and intracellular signaling increase the reliability of inferred communication. The application to a scRNA-seq dataset of tumor microenvironment, the agreement with independent bioinformatics analysis, the validation using spatial transcriptomics data and the comparison with state-of-the-art intercellular scoring schemes confirmed the robustness and reliability of the proposed method. scSeqComm R package is freely available at https://gitlab.com/sysbiobig/scseqcomm and https://sysbiobig.dei.unipd.it/software/#scSeqComm. Submitted software version and test data are available in Zenodo, at https://dx.doi.org/10.5281/zenodo.5833298. Supplementary data are available at Bioinformatics online.

Bulk and single-cell RNA-seq (scRNA-seq) data are being used as alternatives to traditional technology in biology and medicine research. These data are used, for example, for the detection of differentially expressed (DE) genes. Several statistical methods have been developed for the classification of bulk and single-cell RNA-seq data. These feature genes are vitally important for the classification of bulk and single-cell RNA-seq data. The majority of genes are not DE and they are thus irrelevant for class distinction. To improve the classification performance and save the computation time, removal of irrelevant genes is necessary. Removal will aid the detection of the important feature genes. Widely used schemes in the literature, such as the BSS/WSS (BW) method, assume that data are normally distributed and may not be suitable for bulk and single-cell RNA-seq data. In this article, a category encoding (CAEN) method is proposed to select feature genes for bulk and single-cell RNA-seq data classification. This novel method encodes categories by employing the rank of sequence samples for each gene in each class. Correlation coefficients are considered for gene and class with the rank of sample and a new rank of category. The highest gene correlation coefficients are considered feature genes, which are the most effective for classifying bulk and single-cell RNA-seq dataset. The sure screening method was also established for rank consistency properties of the proposed CAEN method. Simulation studies show that the classifier using the proposed CAEN method performs better than, or at least as well as, the existing methods in most settings. Existing real datasets were analyzed, with the results demonstrating superior performance of the proposed method over current competitors. The application has been coded into an R package named "CAEN" to facilitate wide use.

Background: Cancer stem cells (CSCs) play a key role in tumor initiation, progression, and resistance to conventional therapies. These cells possess the ability to self-renew and differentiate, contributing to tumor heterogeneity and recurrence. Preclinical data indicate that targeting cancer stem cell-specific pathways could lead to more effective treatments and prevent relapse, thereby improving outcomes. However, there is limited clinical data to support this, in part due to the challenges of measuring CSCs in the clinical setting. Single-cell RNA sequencing (scRNAseq) data in combination with stemness gene expression signatures were investigated as a novel approach to detect and assess changes in CSC numbers in response to treatment. Methods: Single-cell RNAseq datasets from two clinical trials were interrogated – OPPORTUNE, a window-of-opportunity trial evaluating anastrozole vs anastrozole plus pictilisib (PI3K inhibitor) in 75 patients with ER+ HER2- early breast cancer, and FELINE, a neoadjuvant trial which compared letrozole plus placebo with letrozole plus ribociclib (CDK4/6 inhibitor) in 120 patients with ER+ HER2- early breast cancer. The primary endpoint for OPPORTUNE was the inhibition of tumor cell proliferation as measured by Ki67. The primary endpoint for FELINE was the rate of preoperative endocrine prognostic index (PEPI) score 0 after neoadjuvant endocrine therapy. Thirty-four patients from the FELINE study had available scRNAseq data for analysis; this number was 62 patients for the OPPORTUNE study. Stemness gene expression signatures with published evidence of selectivity for breast CSCs were identified from the literature and their utility in detecting CSCs compared in the datasets. Subsequently, changes in CSC fraction with treatment was assessed. Results: Eight different stemness gene signatures were identified from the published literature. Among these, four (Kim_myc, benporath_es2, Bhattacharya_hESC, and Shats_consensus) exhibited selective expression in a minority of tumor cells, with the Shats consensus signature demonstrating the highest specificity to tumor cells over non-malignant cells. Utilizing a Gaussian mixture model, we estimated that approximately 4.5% of cells within a tumor are likely stem cells. In the OPPORTUNE study, higher stemness scores were observed in luminal B compared to luminal A tumors, but there was no association with PIK3CA mutation status. Changes to Ki67 were inversely associated with the CSC fraction – tumors with higher stemness scores were less likely to achieve a complete cell cycle arrest versus endocrine-sensitive tumors. Similarly, in the FELINE trial, non-responders in the letrozole arm showed a trend towards elevated stemness scores. Conclusion: The use of stemness gene expression signatures in scRNAseq data is a feasible method to assess changes in putative CSC fraction with treatment in breast cancer. Increased stemness scores were associated with more aggressive subtypes and resistance to treatment. Citation Format: Peter Hall,Alejandro Chibly, Peter Schmid, Sarah E Pinder, Arnie Purushotham, Alastair Thompson, Steven Gendreau. Evaluation of breast cancer stem cell gene expression signatures in single-cell RNA sequencing (scRNAseq) data from the OPPORTUNE and FELINE trials, and the association with treatment resistance [abstract]. In: Proceedings of the San Antonio Breast Cancer Symposium 2024; 2024 Dec 10-13; San Antonio, TX. Philadelphia (PA): AACR; Clin Cancer Res 2025;31(12 Suppl):Abstract nr PS13-01.

A Survey on Methods for Predicting Polyadenylation Sites from DNA Sequences, Bulk RNA-seq, and Single-cell RNA-seq

BackgroundSingle‐cell RNA sequencing (scRNA‐seq) is an emerging technology that enables high resolution detection of heterogeneities between cells. One important application of scRNA‐seq data is to detect differential expression (DE) of genes. Currently, some researchers still use DE analysis methods developed for bulk RNA‐Seq data on single‐cell data, and some new methods for scRNA‐seq data have also been developed. Bulk and single‐cell RNA‐seq data have different characteristics. A systematic evaluation of the two types of methods on scRNA‐seq data is needed.ResultsIn this study, we conducted a series of experiments on scRNA‐seq data to quantitatively evaluate 14 popular DE analysis methods, including both of traditional methods developed for bulk RNA‐seq data and new methods specifically designed for scRNA‐seq data. We obtained observations and recommendations for the methods under different situations.ConclusionsDE analysis methods should be chosen for scRNA‐seq data with great caution with regard to different situations of data. Different strategies should be taken for data with different sample sizes and/or different strengths of the expected signals. Several methods for scRNA‐seq data show advantages in some aspects, and DEGSeq tends to outperform other methods with respect to consistency, reproducibility and accuracy of predictions on scRNA‐seq data.

BackgroundCell clustering is a prerequisite for identifying differentially expressed genes (DEGs) in single-cell RNA sequencing (scRNA-seq) data. Obtaining a perfect clustering result is of central importance for subsequent analyses, but not easy. Additionally, the increase in cell throughput due to the advancement of scRNA-seq protocols exacerbates many computational issues, especially regarding method runtime. To address these difficulties, a new, accurate, and fast method for detecting DEGs in scRNA-seq data is needed.ResultsHere, we propose single-cell minimum enclosing ball (scMEB), a novel and fast method for detecting single-cell DEGs without prior cell clustering results. The proposed method utilizes a small part of known non-DEGs (stably expressed genes) to build a minimum enclosing ball and defines the DEGs based on the distance of a mapped gene to the center of the hypersphere in a feature space.ConclusionsWe compared scMEB to two different approaches that could be used to identify DEGs without cell clustering. The investigation of 11 real datasets revealed that scMEB outperformed rival methods in terms of cell clustering, predicting genes with biological functions, and identifying marker genes. Moreover, scMEB was much faster than the other methods, making it particularly effective for finding DEGs in high-throughput scRNA-seq data. We have developed a package scMEB for the proposed method, which could be available at https://github.com/FocusPaka/scMEB.

Anchored-fusion enables targeted fusion search in bulk and single-cell RNA sequencing data

Cell type prediction is one of the most challenging goals in single-cell RNA sequencing (scRNA-seq) data. Existing methods use unsupervised learning to identify signature genes in each cluster, followed by a literature survey to look up those genes for assigning cell types. However, finding potential marker genes in each cluster is cumbersome, which impedes the systematic analysis of single-cell RNA sequencing data. To address this challenge, we proposed a framework based on regularized multi-task learning (RMTL) that enables us to simultaneously learn the subpopulation associated with a particular cell type. Learning the structure of subpopulations is treated as a separate task in the multi-task learner. Regularization is used to modulate the multi-task model (e.g., W1, W2, … Wt) jointly, according to the specific prior. For validating our model, we trained it with reference data constructed from a single-cell RNA sequencing experiment and applied it to a query dataset. We also predicted completely independent data (the query dataset) from the reference data which are used for training. We have checked the efficacy of the proposed method by comparing it with other state-of-the-art techniques well known for cell type detection. Results revealed that the proposed method performed accurately in detecting the cell type in scRNA-seq data and thus can be utilized as a useful tool in the scRNA-seq pipeline.

Single-cell RNA sequencing (scRNA-seq) data are widely used to study cancer cell states and their heterogeneity. However, the tumour microenvironment is usually a mixture of healthy and cancerous cells and it can be difficult to fully separate these two populations based on transcriptomics alone. If available, somatic single-nucleotide variants (SNVs) observed in the scRNA-seq data could be used to identify the cancer population and match that information with the single cells' expression profile. However, calling somatic SNVs in scRNA-seq data is a challenging task, as most variants seen in the short-read data are not somatic, but can instead be germline variants, RNA edits or transcription, sequencing, or processing errors. In addition, only variants present in actively transcribed regions for each individual cell will be seen in the data. To address these challenges, we develop CCLONE (Cancer Cell Labelling On Noisy Expression), an interpretable tool adapted to handle the uncertainty and sparsity of SNVs called from scRNA-seq data. CCLONE jointly identifies cancer clonal populations, and their associated variants. We apply CCLONE on two acute myeloid leukaemia datasets and one lung adenocarcinoma dataset and show that CCLONE captures both genetic clones and somatic events for multiple patients. These results show how CCLONE can be used to gather insight into the course of the disease and the origin of cancer cells in scRNA-seq data. Source code is available at github.com/HaghverdiLab/CCLONE.

Analysis of single-cell RNA sequencing (scRNA-seq) data of immune cells from the tumor microenvironment (TME) may identify tumor progression biomarkers. This study was designed to investigate the prognostic value of differentially expressed genes (DEGs) in intrahepatic cholangiocarcinoma (ICC) using scRNA-seq. We downloaded the scRNA-seq data of 33,991 cell samples, including 17,090 ICC cell samples and 16,901 ICC adjacent tissue cell samples regarded as normal cells. scRNA-seq data were processed and classified into 20 clusters. The immune cell clusters were extracted and processed again in the same way, and each type of immune cells was divided into several subclusters. In total, 337 marker genes of macrophages and 427 marker genes of B cells were identified by comparing ICC subclusters with normal subclusters. Finally, 659 DEGs were obtained by merging B cell and macrophage marker genes. ICC sample clinical information and gene expression data were downloaded. A nine-prognosis-related-gene (PRG) signature was established by analyzing the correlation between DEGs and overall survival in ICC. The robustness and validity of the signature were verified. Functional enrichment analysis revealed that the nine PRGs were mainly involved in tumor immune mechanisms. In conclusion, we established a PRG signature based on scRNA-seq data from immune cells of patients with ICC. This PRG signature not only reflects the TME immune status but also provides new biomarkers for ICC prognosis.

Most existing dimensionality reduction and clustering packages for single-cell RNA-seq (scRNA-seq) data deal with dropouts by heavy modeling and computational machinery. Here, we introduce CIDR (Clustering through Imputation and Dimensionality Reduction), an ultrafast algorithm that uses a novel yet very simple implicit imputation approach to alleviate the impact of dropouts in scRNA-seq data in a principled manner. Using a range of simulated and real data, we show that CIDR improves the standard principal component analysis and outperforms the state-of-the-art methods, namely t-SNE, ZIFA, and RaceID, in terms of clustering accuracy. CIDR typically completes within seconds when processing a data set of hundreds of cells and minutes for a data set of thousands of cells. CIDR can be downloaded at https://github.com/VCCRI/CIDR.