Securing Medical Data in 5G and 6G via Multichain Blockchain Technology using Post-Quantum Signatures

Internet of things is one of the latest technology in today’s era, IoT devices are increasing day by day and become a part of our life. Sometimes we even didn’t know that we are using and surrounded by such technolgy. Smart devices like smart phone, tablets and any wearables are the example of IoT technology. These all are IoT devices and there are many more. As we all are in 2020 and facing the pandemic we all are become more connected with IoT devices to be safe. In this way the number of IoT devices per person will increase so much rapidly and several new innovations either of hardware or software take place. But the Internet of Things (IoT) devices are becoming more popular, the security measures are not upto the mark, and several issues will come in knowledge at different time on different devices. So we have to think about the security and privacy of user and should make it correct. We should learn from the past issues and try to fix them accordingly. To overcome the issues of IoT devices we can have to ways, one is to use ECC which will enchance the security in IoT device and another possible solution can be Blockchain. In this paper we will discuss about ECC and blockchain technology both and try to find a comparitive study.

Recently, Internet of Things (IoT) has drawn a great deal of attention and is envisioned in various sectors in the near future due to its promising benefits. However, the constant and rapid growth in IoT devices also brings new challenges due to constrained power and resources associated to them. One of the challenges is to provide seamless connectivity in mobile IoT. Secondly, IoT devices may stream enormous amount of data; hence, providing a solution that can effectively reduce service cost of data transfer. Finally, there are challenges in management and deployment of services running at mobile IoT Edge Gateway. In this context, containerized virtualization solution could play a key role in support of efficient management and deployment of microservices to provide seamless connectivity. This paper proposes a lightweight container-based virtualization technology for IoT, which employs Docker container-based microservices architecture for effectively deploying applications in a virtualized ecosystem. We evaluated the performance of the proposed solution on real IoT testbed using Raspberry Pi 3 as a mobile IoT Edge Gateway for network handover decision making among various alternatives, such as Wi-Fi, Radio, and Satellite. The results demonstrated better performance compared with the native environment, i.e., the one without introduction of a virtualization layer. The results also showed that the Docker container produces negligible resource overhead and can be used on resource constrained mobile IoT Edge Gateway devices like Raspberry Pi 3 for efficiently managing IoT application and services.

The massive growth in the popularity of Internet of Things (IoT) and hence expansion in the number of IoT devices has led to network control issues. The heterogeneity observed in the generated data from each device has further contributed to latency delays and network traffic concerns. An integral part of current network research encompasses the monitoring of network activities, device identification, and secure exchange of information between different devices. The recognition and administration of these persistently increasing IoT devices have posed major challenges in various fields of their application, like Cyber-Physical Systems (CPSs). Hence, the management of network traffic flow between these devices has become a concerning issue. The prolonged inconsistency in cybersecurity systems and constrained computational capabilities have further made IoT devices more vulnerable to adversarial threats. To this end, the preservation and administration of network activities become crucial to manage. In this chapter, we address the network traffic administration issue for different IoT devices. We focus on the efficient characterization of inter-arrival rates of data generated from IoT devices for packet-level and flow-level analysis. Thus, making identification and management of IoT devices exceedingly significant for securing stable functioning of network activities. We also discuss some influential works conjectured to IoT devices and network analysis. The empirical results obtained from real-world network flows have been reported to provide a precise understanding of our observations. Finally, the strengths and weaknesses of some state-of-the-art technologies are discussed along with relevant future scopes.KeywordsInternet of Things (IoT)Network traffic analysisCyber-Physical System (CPS)IoT devicesFlow controlDevice identification

With the onset of the Internet of Things (IoT) era, the number of IoT devices and sensors is increasing tremendously. This paper is concerned with a health IoT system consisting of various IoT devices carried by members of an environmental health community. We propose a novel trust-based decision making protocol that uses trust-based information sharing among the health IoT devices, so that a collective knowledge base can be built to rate the environment at a particular location and time. This knowledge would enable an IoT device acting on behalf of its user to decide whether or not it should visit this place/environment for health reasons. Unlike existing trust management protocols, our trust-based health IoT protocol considers risk classification, reliability trust, and loss of health probability as three design dimensions for decision making, resulting in a protocol suitable for decision making in health IoT systems. Our protocol is resilient to noisy sensing data provided by IoT devices either unintentionally or intentionally. We present performance data of our trust-based health IoT protocol and conduct a comparative performance analysis of our protocol with two baseline protocols to demonstrate the feasibility.

The number of Internet of Things (IoT) devices has increased recently and will increase further in the future. IoT devices are vulnerable, so vendors update and distribute firmware. At the time of firmware distribution, a huge number of IoT devices may connect to the firmware server and excessive network traffic may occur. Consequently, a method using a peer-to-peer file sharing system and a blockchain has been proposed. One study proposed an update scheme considering incentives for distributors to help with updating. However, this method requires the IoT devices, which have limited processing power, to decrypt encrypted files, and the distribution nodes to pay the transaction cost. This paper proposes a firmware distribution method that provides incentives for distributors to help with distribution to reduce the gas costs, using a smart contract and access control based on update records. The additional computations performed by IoT devices and distributors key management were reduced compared to those in previous studies by using access control instead of encryption. Further, the proposed approach was implemented and evaluated using a Raspberry Pi and laptop. The evaluation demonstrated that the gas cost per update was successfully lowered compared to the costs in previous studies.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

Along with the recent advance in wireless networking and data processing technologies, demands for low latency communication (LLC) are increasing in a wide variety of future-driven autonomous applications such as a smart factory, self-driving cars, and so on. The fifth generation of cellular mobile communications (5G) will cover this need as one of three key capacities in their usage scenarios: enhanced mobile broadband (eMBB), massive machine type communication (mMTC), and ultra-reliable low-latency communications (URLLC). The 5G systems are composed of mobile devices and various internet of things (IoT) devices for sensing, acting, and information services; they configure diverse networking topologies such as direct mobile-to-mobile, also known as device-to-device (D2D). In the 5G D2D network systems, the network topologies are easily broken because of the mobile devices such as smartphones, IoT devices, and so on. Thus, for the highly flexible and extensible 5G D2D network systems, mobility support for the mobile devices is necessary. In this paper, we first explore the mobility issues in beyond 5G D2D. Since there are static and mobile elements in the 5G application domains such as the smart factory, overall mobility would lead to highly frequent topology reconfiguration or connectivity reconstruction. Thus, latency-related problems derived from topology changes and connectivity failures due to the mobility are addressed. To handle the problems, a fast connectivity construction scheme, denoted by LMK, is proposed with a deep neural network dealing with learning on radio signal information in order to achieve the LLC. Evaluation results demonstrate that the proposed framework can provide reliable connectivity for the MAC layer link with a low latency data transmission.

The Internet of Things (IoT) is a modern computing model that refers to interconnected physical devices or IoT devices containing sensors, actuators and networking, so that these IoT devices can link, communicate and share data. With the rise in the number of IoT devices, several security concerns have been found, especially in the sharing of sensitive data. Authentication is one of these reliability concerns. In the IoT world, authentication is a major challenge due to the complexity of protocols, devices and topologies. IoT systems interacting with each other need to be trustworthy in order to prevent various forms of security negligence attacks. Authentication is also the cornerstone of access management and transparency. The new authentication system is no longer ideal for IoT applications. They need to be updated in order to take into account the drawbacks of these device functions, such as limited memory and storage and poor processing power. This article focuses primarily on the analysis and evaluation of some of the newest authentication solutions suggested for the IoT environment. There are 35 authentication protocol are analysed and presented at one place with their applications.

Internet of Things (IoT) is an intelligent infrastructure and service technology that connects objects to people for monitoring and control. The number of IoT devices is rapidly increasing in various environments. Although the DNS protocol is being applied to IoT networks to create unique identifiers, it is burdensome for users to manually create and configure a globally unique name for each device. DNS Name Autoconfiguration (DNSNA) was proposed to register the DNS name of IoT devices automatically and utilize IoT devices globally. However, DNSNA without secure authentication and authorization leads to potential threats, such as the registration of malicious IoT devices, and other IoT security attacks. In this paper, we propose an Advanced Secure DNS name autoconfiguration with Authentication and Authorization for enterprise IoT network (ASDAI). Especially, we provide the first model using the convergence of extended OAuth 2.0 and Kerberos v5. The proposed protocol supports (1) reliable device / administrator registration, (2) secure DNS name autoconfiguration, and (3) user / service authentication and authorization procedure for the heterogeneity and scalability of enterprise IoT networks.

Seeing is not always believing: Insights on IoT manufacturing from firmware composition analysis and vendor survey

With the advancement in science and technology, the demand for electronic Internet of Things (IoT) devices has increased to store and process digital data. With the advancement in IoT technology, we are more reliant on IoT devices to perform our regular tasks. IoT Forensics deals with the investigation of IoT devices such as smartphones, tablets, smart watches, or any device which is connected to the Internet. The data on these devices can still be retrieved via IoT forensics even if they are destroyed, resold, or misplaced. Before discarding any IoT device, we must consider how to secure the data stored on them. We are then going to discuss the several types of personal data that could be retrieved from discarded IoT devices. Finally, we are going to discuss the protection measures for the safe disposal of IoT devices.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

With the advancement of 5G mobile telecommunication, various IoT (Internet of Things) devices communicate massive amounts of data by being connected to wireless networks. Since this wireless communication is vulnerable to hackers via data leakage during communication, the transmitted data should be encrypted through block ciphers to protect the data during communication. In addition, in order to encrypt the massive amounts of data securely, it is essential to apply one of secure mode of operation. Among them, CTR (CounTeR) mode is the most widely used in industrial applications. However, these IoT devices have limited resources of computing and memory compared to typical computers, so that it is challenging to process cryptographic algorithms that have computation-intensive tasks in IoT devices at high speed. Thus, it is required that cryptographic algorithms are optimized in IoT devices. In other words, optimizing cryptographic operations on these IoT devices is not only basic but also an essential effort in order to build secure IoT-based service systems. For efficient encryption on IoT devices, even though several ARX (Add-Rotate-XOR)-based ciphers have been proposed, it still necessary to improve the performance of encryption for smooth and secure IoT services. In this article, we propose the first parallel implementations of CTR mode of ARX-based ciphers: LEA (Lightweight Encryption Algorithm), HIGHT (high security and light weight), and revised CHAM on the ARMv8 platform, a popular microcontroller in various IoT applications. For the parallel implementation, we propose an efficient data parallelism technique and register scheduling, which maximizes the usage of vector registers. Through proposed techniques, we process the maximum amount of encryption simultaneously by utilizing all vector registers. Namely, in the case of HIGHT and revised CHAM-64/128 (resp. LEA, revised CHAM-128/128, and CHAM-128/256), we can execute 48 (resp. 24) encryptions simultaneously. In addition, we optimize the process of CTR mode by pre-computing and using the intermediate value of some initial rounds by utilizing the property that the nonce part of CTR mode input is fixed during encryptions. Through the pre-computation table, CTR mode is optimized up until round 4 in LEA, round 5 in HIGHT, and round 7 in revised CHAM. With the proposed parallel processing technique, our software provides 3.09%, 5.26%, and 9.52% of improved performance in LEA, HIGHT, and revised CHAM-64/128, respectively, compared to the existing parallel works in ARM-based MCU. Furthermore, with the proposed CTR mode optimization technique, our software provides the most improved performance with 8.76%, 8.62%, and 15.87% in LEA-CTR, HIGHT-CTR, and revised CHAM-CTR, respectively. This work is the fastest implementation of CTR mode on ARMv8 architecture to the best of our knowledge.