Self-Aligned Hybrid Nanocavities Using Atomically Thin Materials

Photonic platforms with excellent nonlinear optical characteristics are very important to improve the devices' performance parameters such as integration, modulation speeds and working bandwidths for all-optical signal processing. The traditional processing technology of photonic platforms based on silicon, silicon nitride and silicon oxide is mature, but the nonlinear function of these optical platforms is limited due to the characteristics of materials; Although two-dimensional (2D) materials possess excellent nonlinear optical properties, their nonlinear potentials cannot be fully utilized because of their atomic layer thickness. Integrating 2D materials with mature photonic platforms can significantly improve the interaction between light and matter, give full play to the potentials of 2D materials in the field of nonlinear optics, and improve the nonlinear optical performances of the integrated platforms on the basis of fully utilizing the mature processing technology of the photonic platforms. Based on the above ideas, starting from the basic principle of nonlinear optics (Section 2), this review combs the research progress of various nonlinear photonic platforms (resonators, metasurfaces, optical fibers, on-chip waveguides, etc.) heterogeneously integrated with 2D materials, realized by traditional transfer methods (Section 3) and emerging direct-growth methods (Section 4) in recent years, and the introduction is divided into second-order and third-order nonlinearity. Comparing with the transfer methods, the advantages of using direct-growth methods to realize the heterogeneous integration of 2D materials and photonic platforms for the study of nonlinear optics are expounded, and the technical difficulties to be overcome in preparing the actual devices are also pointed. In the future, we can try to grow 2D materials directly onto the surfaces of various cavities to study the enhancement of second-order nonlinearity; we can also try to grow 2D materials directly onto the on-chip waveguides or microrings to study the enhancement of third-order nonlinearity. Generally speaking, the research on integrated nonlinearity by directly growing 2D materials onto various photonic structures has aroused great interest of researchers in this field. As time goes on, breakthrough progress will be made in this field, and technical problems such as continuous growth of high-quality 2D materials onto photonic structures and wafer-level large-scale preparation will be broken through, further improving the performance parameters of chips and laying a good foundation for optical communication, signal processing, optical sensing, all-optical computing, quantum technology and so on.

The rapid development and unique properties of two-dimensional (2D) materials, such as graphene, phosphorene and transition metal dichalcogenides enable them to become intriguing candidates for future optoelectronic applications. To maximize the potential of 2D material-based optoelectronics, various photonic structures are integrated to form photonic structure/2D material hybrid systems so that the device performance can be manipulated in controllable ways. Here, we first introduce the photocurrent-generation mechanisms of 2D material-based optoelectronics and their performance. We then offer an overview and evaluation of the state-of-the-art of hybrid systems, where 2D material optoelectronics are integrated with photonic structures, especially plasmonic nanostructures, photonic waveguides and crystals. By combining with those photonic structures, the performance of 2D material optoelectronics can be further enhanced, and on the other side, a high-performance modulator can be achieved by electrostatically tuning 2D materials. Finally, 2D material-based photodetector can also become an efficient probe to learn the light-matter interactions of photonic structures. Those hybrid systems combine the advantages of 2D materials and photonic structures, providing further capacity for high-performance optoelectronics.

The layered two-dimensional (2D) materials, e.g., the well-known graphene, transition metal dichalcogenides, and topological insulators, have attracted great interest of researchers from fundamental research as well as industries owing to their intriguing properties in a number of aspects. In practical applications, the efficient modification of the features of 2D materials is compelling and essential to achieve desired functionalities. Ion implantation has been successfully applied to synthesize graphene. The most exotic advantage of ion beam technology is that it offers distinct options of energetic beams, which has recently shown the unique capability to modify and tailor the properties of versatile 2D materials. To name a few, the energetic ion beams could implement the surface morphology or layer-to-layer structural engineering of 2D materials. At the microcosmic level, the introduction of ion beam induced defects and intentional doping of specific ions are the basis of tailoring properties of 2D materials. By manipulating the parameters of ion beams (energies, species, fluences, incident angles, etc.), the modified 2D materials may possess novel properties, which are unprecedented in pristine ones. Promising applications based on these 2D materials with ion beam tailored features have been realized in a broad range of fields. In this work, we systematically review the latest research progress on the deployed techniques and property modifications of graphene and other 2D materials under the treatment of various ion beams. A few selected applications are presented to indicate the practical potentials of ion beam modified 2D materials in distinct areas. Perspectives on future developments are also provided by focusing on several promising topics.

The development of two-dimensional (2D) materials for biomedical applications has accelerated exponentially. Contrary to their bulk counterparts, the exceptional properties of 2D materials make them highly prospective for contrast agents for bioimage, drug, and heat delivery in biomedical treatment. Nevertheless, empty space in the integration and utilisation of 2D materials in living biological systems, potential toxicity, as well as required complicated synthesis and high-cost production limit the real application of 2D materials in those advance medical treatments. On the other hand, green technology appears to be one of strategy to shed a light on the blurred employment of 2D in medical applications, thus, with the increasing reports of green technology that promote advanced technologies, here, we compile, summarise, and synthesise information on the biomedical technology of 2D materials through green technology point of view. Beginning with a fundamental understanding, of crystal structures, the working mechanism, and novel properties, this article examines the recent development of 2D materials. As well as 2D materials made from natural and biogenic resources, a recent development in green-related synthesis was also discussed. The biotechnology and biomedical-related application constraints are also discussed. The challenges, solutions, and prospects of the so-called green 2D materials are outlined.

Electrically contacting two‐dimensional (2D) materials is an inevitable process in the fabrication of devices for both the study of fundamental nanoscale charge transport physics and the design of high‐performance novel electronic and optoelectronic devices. The physics of electrical contact formation and interfacial charge injection critically underlies the performance, energy‐efficiency and the functionality of 2D‐material‐based devices, thus representing one of the key factors in determining whether 2D materials can be successfully implemented as a new material basis for the development of next‐generation beyond‐silicon solid‐state device technology. In this review, the recent developments in the theory and the computational simulation of electron emission, interfacial charge injection and electrical contact formation in 2D material interfaces, heterostructures, and devices are reviewed. Focusing on thermionic charge injection phenomena which are omnipresent in 2D‐materials‐based metal/semiconductor Schottky contacts, we summarize various transport models and scaling laws recently developed for 2D materials. Recent progress on the first‐principle density functional theory simulation of 2D‐material‐based electrical contacts are also reviewed. This review aims to provide a crystalized summary on the physics of charge injection in the 2D Flatlands for bridging the theoretical and the experimental research communities of 2D material device physics and technology.image

The integration of two-dimensional (2D) materials with photonic structures has catalyzed a wide spectrum of optical and optoelectronic applications. Conventional nanophotonic structures generally lack efficient reconfigurability and multifunctionality. The atomically thin 2D van der Waals materials can thus infuse new functionality and reconfigurability to the well-established library of photonic structures such as integrated waveguides, optical fibers, photonic crystals, micro-cavities, and metasurface, to name a few. Thanks to the handiness of van der Waals interfaces, the 2D materials can be easily transferred and mixed with other prefabricated photonic templates with high degrees of freedom, and can act as the optical gain, modulation, sensing, or plasmonic media for diverse applications. Here we review recent advents on combining 2D materials to nanophotonic structures for new functionality development or performance enhancements. Challenges and emerging opportunities in integrating van der Waals building blocks beyond 2D materials are also discussed.

Environmental resilience with 2D materials: A futuristic perspective

Two-dimensional (2D) materials have attracted increasing interest in the last few years due to their unique morphology and properties and their use in a variety of applications, ranging from electronics to energy storage or catalysis, to name a few. Apart from various well-established 2D materials, such as graphene, h-BN, or MoS2, black phosphorus (BP) has received considerable attention over the last two years because its direct bandgap and his appealing properties for electronic and ultrafast optoelectronic applications. However, its lack of environmental stability severely limits its synthesis and processing. We have recently demonstrated that high-quality, few-layer BP nanosheets, with controllable size and observable photoluminescence, can be produced in large quantities by liquid phase exfoliation under ambient conditions.1 Beyond this success, a more sophisticated chemical modification is highly desirable, like the molecular doping, that is an effective and flexible method towards modulating the electronic properties of 2D materials. Herein, we have developed a chemical route for the non-covalent functionalization of BP with different moieties, including electron-withdrawing organic molecules or tailor-made surfactants.2 Moreover we have extended these concepts towards a new 2D material: antimonene, creating stable suspensions in water and developing its non-covalent functionalization.3 1) D. Hanlon, C. Backes, E. Doherty, C. S. Cucinotta, N. C. Berner, C. Boland, K. Lee, A. Harvey, P. Lynch, Z. Gholamvand, S. F. Zhang, K. P. Wang, G. Moynihan, A. Pokle, Q. M. Ramasse, N. McEvoy, W. J. Blau, J. Wang, G. Abellan, F. Hauke, A. Hirsch, S. Sanvito, D. D. O’Regan, G. S. Duesberg, V. Nicolosi, J. N. Coleman, Nat. Commun. 2015, 6, 8563. 2) G. Abellán, V. Lloret, U. Mundloch, M. Marcia, C. Neiss, A. Görling, M. Varela, F. Hauke, A. Hirsch, Angew. Chem. In. Ed., 2016, 55 (47), 14557. 3) C. Gibaja, D. Rodriguez-San-Miguel, P. Ares, J. Gómez-Herrero, M. Varela, R. Gillen, J. Maultzsch, F. Hauke, A. Hirsch, G. Abellán, F. Zamora, Angew. Chem. In. Ed., 2016, 55 (46), 14345.

Two-dimensional (2D) materials have captured the attention of the scientific community due to the wide range of unique properties at nanometer-scale thicknesses. While significant exploratory research in 2D materials has been achieved, the understanding of 2D electronic transport and carrier dynamics remains in a nascent stage. Furthermore, because prior review articles have provided general overviews of 2D materials or specifically focused on charge transport in graphene, here we instead highlight charge transport mechanisms in post-graphene 2D materials, with particular emphasis on transition metal dichalcogenides and black phosphorus. For these systems, we delineate the intricacies of electronic transport, including band structure control with thickness and external fields, valley polarization, scattering mechanisms, electrical contacts, and doping. In addition, electronic interactions between 2D materials are considered in the form of van der Waals heterojunctions and composite films. This review concludes with a perspective on the most promising future directions in this fast-evolving field.

Two-dimensional (2D) materials, such as graphene and transition-metal dichalcogenide monolayers, have unique properties that are distinctly different from those of their bulk counterparts, and hopefully possess a wide range of applications in 2D semiconductor device. Structural defects are known to have profound influences on the properties of crystalline materials; thus, correlating the defect structure with local properties in 2D material is of fundamental importance. However, electron microscopy studies of 2D materials on an atomic scale have become a challenge as most of these materials are susceptible to electron beam irradiation damage under high voltage and high dose experimental conditions. The development of low voltage aberration-corrected scanning transmission electron microscopy (STEM) has made it possible to study 2D materials at a single atom level without damaging their intrinsic structures. In addition, controllable structural modification by using electron beam becomes feasible by controlling the electron beam-sample interaction. New nanostructures can be created and novel 2D materials can be fabricated in-situ by using this approach. In this article, we review some of our recent studies of graphene and transition-metal dichalcogenides to showcase the applications of low voltage aberration corrected STEM in 2D material research.

Two-dimensional (2D) materials have emerged as a forefront of research in materials science, driven by their exceptional and diverse properties. These materials, often with atomic thickness, exhibit phase transitions with small energy barrier, which can enable the development of energy-efficicient devices. Understanding these phase transitions is not only a fascinating scientific endeavor but also crucial for technological innovation. In this presentation, we will cover phase transitions in 2D materials, encompassing both intralayer and interlayer phenomena. We will dissect the mechanisms by which phase transitions can radically modify the electrical, optical, and mechanical properties of these materials, and discuss the engineering approaches designed to control energy barrier and transition process. Special attention will be given to the devices developed from phase transition phenomena in 2D materials, highlighting their potential applications in the realms of memory storage and sensory technology.

The Moore’s law of scaling of metal oxide semiconductor field effect transistor (MOSFET) had been a driving force toward the unprecedented advancement in development of integrated circuit over the last five decades. As the technology scales down to 7 nm node and below following the Moore’s law, conventional MOSFETs are becoming more vulnerable to extremely high off-state leakage current exhibiting a tremendous amount of standby power dissipation. Moreover, the fundamental physical limit of MOSFET of 60 mV/decade subthreshold slope exacerbates the situation further requiring current transport mechanism other than drift and diffusion for the operation of transistors. One way to limit such unrestrained amount of power dissipation is to explore novel materials with superior thermal and electrical properties compared to traditional bulk materials. On the other hand, energy efficient steep subthreshold slope devices are the other possible alternatives to conventional MOSFET based on emerging novel materials. This dissertation addresses the potential of both advanced materials and devices for development of next generation energy efficient integrated circuits. Among the different steep subthreshold slope devices, tunnel field effect transistor (TFET) has been considered as a promising candidate after MOSFET. A superior gate control on source-channel band-to-band tunneling providing subthreshold slopes well below than 60 mV/decade. With the emergence of atomically thin two-dimensional (2D) materials, interest in the design of TFET based on such novel 2D materials has also grown significantly. Graphene being the first and the most studied among 2D materials with exotic electronic and thermal properties. This dissertation primarily considers current transport modeling of graphene based tunnel devices from transport phenomena to energy efficient integrated circuit design. Three current transport models: semi-classical, semi-quantum and numerical simulations are described for the modeling of graphene nanoribbon tunnel field effect transistor (GNR TFET) where the semi-classical model is in close agreement with the quantum transport simulation. Moreover, the models produced are also extended for integrated circuit design using Verilog-A hardware description language for logic design. In order to overcome the challenges associated with the band gap engineering for making graphene transistor for logic operation, the promise of graphene based interlayer tunneling transistors are discussed along with their existing fundamental physical limitation of subthreshold slope. It has been found that such interlayer tunnel transistor has very poor electrostatic gate control on drain current. It gives subthreshold slope greater than the thermionic limit of 60 mV/decade at room temperature. In order to resolve such limitation of

In the last decade, the rise of two-dimensional (2D) materials has attracted a tremendous amount of interest for the entire field of photonics and opto-electronics. The mechanism of light–matter interaction in 2D materials challenges the knowledge of materials physics, which drives the rapid development of materials synthesis and device applications. 2D materials coupled with plasmonic effects show impressive optical characteristics, involving efficient charge transfer, plasmonic hot electrons doping, enhanced light-emitting, and ultrasensitive photodetection. Here, we briefly review the recent remarkable progress of 2D materials, mainly on graphene and transition metal dichalcogenides, focusing on their tunable optical properties and improved opto-electronic devices with plasmonic effects. The mechanism of plasmon enhanced light–matter interaction in 2D materials is elaborated in detail, and the state-of-the-art of device applications is comprehensively described. In the future, the field of 2D materials holds great promise as an important platform for materials science and opto-electronic engineering, enabling an emerging interdisciplinary research field spanning from clean energy to information technology.

With the rapid development of microelectronic integration technology, the miniaturization, integration and multifunction of electronic devices are becoming a general trend. Two-dimensional materials are a class of layered material with atomic layer thickness, and have unique electrical, magnetic, optical and mechanical properties. The co-existence of the weak van der Waals force between layers and the strong covalent bonding within layers makes the two-dimensional material very suitable for the miniature design of new-generation multifunctional electronic devices. Two-dimensional materials, represented by graphene and transition metal chalcogenides, exhibit high mobility, adjustable energy band and high visible light transmittance, and thus having become the frontier hotspots in the field of micro-nanoscience in recent years. Synergy between two-dimensional materials and various functional materials such as SiO<sub>2</sub> insulator, semiconductor, metal and organic compound may lead to new properties and device applications, thus can deepen and expand the basic research and application of two-dimensional materials. Among them, ferroelectric materials have received much attention because of their spontaneous polarizations, high dielectric constants, and high piezoelectric coefficients. The two-dimensional ferroelectric composites well have the advantages of the two, i.e. they not only contain a variety of rich phenomena such as the magnetoelectric coupling effect, ferroelectric field effect and lattice strain effect, tunneling effect, photoelectric effect, and photoluminescence effect, but also have broad applications in devices such as multi-state memories, tunneling transistors, photoelectric diodes, solar cells, super capacitors, and pyroelectric infrared detectors, which have attracted wide concern from academia and industry. To better understand the combination of two-dimensional thin films with ferroelectric substrates and provide a holistic view, we review the researches of several typical two-dimensional film/ferroelectrics heterostructures in this article. First, two-dimensional materials and ferroelectric materials are introduced. Then, the physical mechanism at the interface is briefly illustrated. After that, several typical two-dimensional film/ferroelectrics heterostructures are mainly introduced. The ferroelectric materials including Pb(Zr<sub>1–<i>x</i></sub>Ti<i><sub>x</sub></i>)O<sub>3</sub>, (1–<i>x</i>)PbMg<sub>1/3</sub>Nb<sub>2/3</sub>O<sub>3</sub>–<i>x</i>PbTiO<sub>3</sub>, P(VDF-TrFE), are mainly summarized, and other ferroelectric materials such as P(VDF-TrFE-CFE), BaTiO<sub>3</sub>, BiFeO<sub>3</sub>, PbTiO<sub>3</sub>, CuInP<sub>2</sub>S<sub>6</sub>, HfO<sub>2</sub> are briefly involved. The future research emphasis of the two-dimensional materials/ferroelectrics composites is also suggested at the end of the article. This review will present a significant reference to the future design of miniature and multifunctional devices.

Atomically thin nanomaterials represent a unique paradigm for interfacing with biological systems due to their mechanical flexibility, exceptional interfacial area, and ease of chemical functionalization. In particular, these two-dimensional (2D) materials are able to bend, curve, and fold in response to biologically-generated forces or other external stimuli. Such origami-like folding of 2D materials into wrinkled or crumpled topographies allows them to withstand large deformations by accordion-like unfolding, with implications for stretchable and shape-changing devices. Here, we review how mechanically manipulated 2D materials can interact with biological systems across a multitude of length scales. We focus on recent work where wrinkling, crumpling, or bending of 2D materials permits new chemical and material properties, with four case studies: (i) programming biomolecular reactivity and enhanced sensing, (ii) directed adhesion and encapsulation of bacteria or mammalian cells, (iii) stimuli-responsive actuators and soft robotics, and (iv) stretchable barrier technologies and wearable human-scale sensors. Finally, we consider future directions for manufacturing, materials and systems integration, as well as biocompatibility. Taken together, these 2D materials may enable new avenues for ultrasensitive molecular detection, biomaterial scaffolds, soft machines, and wearable technologies.