Self-organized error correction in random unitary circuits with measurement

We analyze the dynamics of entanglement entropy in a generic quantum many-body open system from the perspective of quantum information and error corrections. We introduce a random unitary circuit model with intermittent projective measurements, in which the degree of information scrambling by the unitary and the rate of projective measurements are independently controlled. This model displays two stable phases, characterized by the volume-law and area-law scaling entanglement entropy in steady states. The transition between the two phases is understood from the point of view of quantum error correction: the chaotic unitary evolution protects quantum information from projective measurements that act as errors. A phase transition occurs when the rate of errors exceeds a threshold that depends on the degree of information scrambling. We confirm these results using numerical simulations and obtain the phase diagram of our model. Our work shows that information scrambling plays a crucial role in understanding the dynamics of entanglement in an open quantum system and relates the entanglement phase transition to changes in quantum channel capacity.

<p indent="0mm">Recently, the achievement, entitled “lifetime enhancement for a logic qubit by bosonic encoding error correction”, has been selected as one of “The Ten Major Advances in Chinese Science 2023”. Here, we will introduce briefly the importance of this work. It is known that quantum states are fragile due to decoherence induced by environment. Error will happen on a qubit, resulting in continuously changes of the parameters for this qubit, such as amplitude and phase parameters. The aim of quantum error correction is to amend those errors by using various quantum error correction codes, in which a logic qubit can be represented by several physical qubits. It should be noted that the quantum error correction can be realized by correcting a discrete set of errors, such as bit-flip error, phase-flip error or both of them. On the other hand, types of errors occurred depend on specific platforms of quantum computation. For example, photon loss is more inclined to occur in photonic systems. In this case, the approach of bosonic encoding of quantum error correction is more efficient. The work “lifetime enhancement for a logic qubit by bosonic encoding error correction” is for such a scenario. The challenge of quantum error correction is that operation itself is not perfect which may incur new errors. So it is actually difficult to demonstrate that we can benefit from quantum error correction. The achievement of lifetime enhancement by bosonic encoding error correction succeeds in beating this break-even point. The experiments are performed by circuit quantum electrodynamics on a superconducting processor with a qubit and a coupled resonate cavity. The logic qubit is realized by the bosonic mode of the cavity, while the superconducting qubit plays the role of the ancillary qubit in error correction. The initial states are prepared by the superconducting qubit, and are transferred to the logic qubit in the cavity. Then the error correction can be performed based on detection of photon loss by the superconducting qubit. The results show that the lifetime of the logic qubit increases from <sc>694 μs</sc> to <sc>805 μs</sc> with 16% enhancement. Besides high quality devices, the success of this experiment depends on the feedback control to detect and correct the error of photon loss in a short time. The result of beating the break-even point of bosonic encoding error correction is for one logic qubit. In the near future, it is hopeful to implement logic gates, such as single-qubit rotation gate and two-qubit gate, on a couple of logic qubits by bosonic encoding. The importance of the results will depend on whether higher fidelity can be achieved compared with those of gates with physical qubits. In this way, the advantage of the logic qubits for quantum computation is presented. It will be significant that the approach of bosonic encoding with a superconducting processor is scalable to hundreds of logic qubits, which may take a few years to realize. Our aim is to realize a fault-tolerant universal quantum computer based on a large quantity of high-precision logic qubits. The work “lifetime enhancement for a logic qubit by bosonic encoding error correction” is an important step toward this aim.

In this work, we investigate some applications of quantum information theory motivated by high-energy physics. There is strong evidence suggesting that entanglement is deeply connected with the geometry of spacetime, which leads to surprising applications of quantum information theory in the AdS/CFT correspondence and holography. We start by reviewing the fundamental concepts of the AdS/CFT correspondence which play a key role in bulk-boundary reconstruction, in particular, we explore some features which suggest that one must interpret the encoding of information in the correspondence as a quantum errorcorrecting code. We discuss the fundamentals of error correction, exploring the formalisms of operator algebra and stabilizer codes. Then, we establish the concrete connection between the two main concepts by showing examples of quantum error-correcting codes that serve as a toy model for AdS/CFT. We illustrate how the 3-qutrit code and the HaPPY code can be powerful tools to explore the correspondence analytically and to solve apparent paradoxes. Following recent results, using quantum error correction, that suggest an intrinsic incompatibility of quantum gravity with global symmetries, we explore approximate error-correcting codes and asymmetric codes as a way to better understand the consequences in a quantum resource-theoretic way. Finally, we discuss our original contribution: geometric bounds for approximate quantum error correction. We calculate our bounds for three typical quantum channels that model the lack of exactness in error correction, namely, dephasing, depolarizing, and amplitude damping channels. The implications of our bounds for AdS/CFT are somewhat elusive; nonetheless, we provide a new approach to benchmark approximations in error correction performance, which may be of high interest for AdS/CFT and its corresponding absence of global symmetries.

We analyze simple quantum error detection and quantum error correction protocols relevant to current experiments with superconducting qubits. We show that for qubits with energy relaxation the repetitive $N$-qubit codes cannot be used for quantum error correction, but can be used for quantum error detection. In the latter case it is sufficient to use only two qubits for the encoding. In the analysis we demonstrate a useful technique of unraveling the qubit energy relaxation into ``relaxation'' and ``no relaxation'' scenarios. Also, we propose and numerically analyze several two-qubit algorithms for quantum error detection and correction, which can be readily realized at the present-day level of the phase qubit technology.

We study the scrambling of quantum information in local random unitary circuits by focusing on the tripartite information proposed by Hosur et al. We provide exact results for the averaged Renyi-2 tripartite information in two cases: (i) the local gates are Haar random and (ii) the local gates are dual-unitary and randomly sampled from a single-site Haar-invariant measure. We show that the latter case defines a one-parameter family of circuits, and prove that for a "maximally chaotic" subset of this family quantum information is scrambled faster than in the Haar-random case. Our approach is based on a standard mapping onto an averaged folded tensor network, that can be studied by means of appropriate recurrence relations. By means of the same method, we also revisit the computation of out-of-time-ordered correlation functions, rederiving known formulas for Haar-random unitary circuits, and presenting an exact result for maximally chaotic random dual-unitary gates.

Quantum error correction (QEC) can overcome the errors experienced by qubits and is therefore an essential component of a future quantum computer. To implement QEC, a qubit is redundantly encoded in a higher-dimensional space using quantum states with carefully tailored symmetry properties. Projective measurements of these parity-type observables provide error syndrome information, with which errors can be corrected via simple operations. The 'break-even' point of QEC--at which the lifetime of a qubit exceeds the lifetime of the constituents of the system--has so far remained out of reach. Although previous works have demonstrated elements of QEC, they primarily illustrate the signatures or scaling properties of QEC codes rather than test the capacity of the system to preserve a qubit over time. Here we demonstrate a QEC system that reaches the break-even point by suppressing the natural errors due to energy loss for a qubit logically encoded in superpositions of Schrödinger-cat states of a superconducting resonator. We implement a full QEC protocol by using real-time feedback to encode, monitor naturally occurring errors, decode and correct. As measured by full process tomography, without any post-selection, the corrected qubit lifetime is 320 microseconds, which is longer than the lifetime of any of the parts of the system: 20 times longer than the lifetime of the transmon, about 2.2 times longer than the lifetime of an uncorrected logical encoding and about 1.1 longer than the lifetime of the best physical qubit (the |0〉f and |1〉f Fock states of the resonator). Our results illustrate the benefit of using hardware-efficient qubit encodings rather than traditional QEC schemes. Furthermore, they advance the field of experimental error correction from confirming basic concepts to exploring the metrics that drive system performance and the challenges in realizing a fault-tolerant system.

Chapter 7 - Quantum error correction fundamentals

Quantum error correction is an important building block for reliable quantum information processing. A challenging hurdle in the theory of quantum error correction is that it is significantly more difficult to design error-correcting codes with desirable properties for quantum information processing than for traditional digital communications and computation. A typical obstacle to constructing a variety of strong quantum error-correcting codes is the complicated restrictions imposed on the structure of a code. Recently, promising solutions to this problem have been proposed in quantum information science, where in principle any binary linear code can be turned into a quantum error-correcting code by assuming a small number of reliable quantum bits. This paper studies how best to take advantage of these latest ideas to construct desirable quantum error-correcting codes of very high information rate. Our methods exploit structured high-rate low-density parity-check codes available in the classical domain and provide quantum analogues that inherit their characteristic low decoding complexity and high error correction performance even at moderate code lengths. Our approach to designing high-rate quantum error-correcting codes also allows for making direct use of other major syndrome decoding methods for linear codes, making it possible to deal with a situation where promising quantum analogues of low-density parity-check codes are difficult to find.

Contrary to the assumption that most quantum error-correcting codes (QECC) make, it is expected that phase errors are much more likely than bit errors in physical devices. By employing the entanglement-assisted stabilizer formalism, we develop a new kind of error-correcting protocol which can flexibly trade error correction abilities between the two types of errors, such that high error correction performance is achieved both in symmetric and in asymmetric situations. The characteristics of the QECCs can be optimized in an adaptive manner during information transmission. The proposed entanglement-assisted QECCs require only one ebit regardless of the degree of asymmetry at a given moment and can be decoded in polynomial time.

Quantum machine learning (QML) is an emerging field that promises advantages such as faster training, improved reliability and superior feature extraction over classical counterparts. However, its implementation on quantum hardware is challenging due to the noise inherent in these systems, necessitating the use of quantum error correction (QEC) codes. Current QML research remains primarily theoretical, often assuming noise-free environments and offering little insight into the integration of QEC with QML implementations. To address this, we investigate the performance of a simple, parity-classifying Variational Quantum Classifier (VQC) implemented with the [[4,2,2]] error-detecting stabiliser code in a simulated noisy environment. To our knowledge, this is the first implementation of a stabiliser-based error detection code to a QML algorithm. We invoke ancilla qubits to logically encode rotation gates, and classically simulate the logically-encoded VQC under two simple noise models representing gate noise and environmental noise. We demonstrate that the stabiliser code improves the training accuracy at convergence compared to noisy implementations without error detection. However, we find that the effectiveness and reliability of error detection is contingent upon keeping the ancilla qubit error rates below a specific threshold, due to the propagation of ancilla errors to the physical qubits. Our results provide an important insight that extends to QML implemented with full error-correction: when the QEC code requires ancilla qubits for logical rotations but cannot fully correct errors propagated between ancilla and physical qubits, the maximum achievable accuracy of the QML model is constrained. This highlights the need for additional error correction or mitigation strategies to support the practical implementation of QML algorithms with QEC on quantum devices.

Scalable quantum computation and communication require error control to protect quantum information against unavoidable noise. Quantum error correction protects information stored in two-level quantum systems (qubits) by rectifying errors with operations conditioned on the measurement outcomes. Error-correction protocols have been implemented in nuclear magnetic resonance experiments, but the inherent limitations of this technique prevent its application to quantum information processing. Here we experimentally demonstrate quantum error correction using three beryllium atomic-ion qubits confined to a linear, multi-zone trap. An encoded one-qubit state is protected against spin-flip errors by means of a three-qubit quantum error-correcting code. A primary ion qubit is prepared in an initial state, which is then encoded into an entangled state of three physical qubits (the primary and two ancilla qubits). Errors are induced simultaneously in all qubits at various rates. The encoded state is decoded back to the primary ion one-qubit state, making error information available on the ancilla ions, which are separated from the primary ion and measured. Finally, the primary qubit state is corrected on the basis of the ancillae measurement outcome. We verify error correction by comparing the corrected final state to the uncorrected state and to the initial state. In principle, the approach enables a quantum state to be maintained by means of repeated error correction, an important step towards scalable fault-tolerant quantum computation using trapped ions.

The storage and processing of quantum information are susceptible to external noise, resulting in computational errors. A powerful method to suppress these effects is quantum error correction. Typically, quantum error correction is executed in discrete rounds, using entangling gates and projective measurement on ancillary qubits to complete each round of error correction. Here we use direct parity measurements to implement a continuous quantum bit-flip correction code in a resource-efficient manner, eliminating entangling gates, ancillary qubits, and their associated errors. An FPGA controller actively corrects errors as they are detected, achieving an average bit-flip detection efficiency of up to 91%. Furthermore, the protocol increases the relaxation time of the protected logical qubit by a factor of 2.7 over the relaxation times of the bare comprising qubits. Our results showcase resource-efficient stabilizer measurements in a multi-qubit architecture and demonstrate how continuous error correction codes can address challenges in realizing a fault-tolerant system.

Boson quantum error correction is an important means to realize quantum error correction information processing. In this paper, we consider the connection of a single-mode Gottesman-Kitaev-Preskill (GKP) code with a two-dimensional (2D) surface (surface-GKP code) on a triangular quadrilateral lattice. On the one hand, we use a Steane-type scheme with maximum likelihood estimation for surface-GKP code error correction. On the other hand, the minimum-weight perfect matching (MWPM) algorithm is used to decode surface-GKP codes. In the case where only the data GKP qubits are noisy, the threshold reaches σ ≈ 0.5 (bar{p}approx 12.3 %). If the measurement is also noisy, the threshold is reached σ ≈ 0.25 (bar{p}approx 10.02 %). More importantly, we introduce a neural network decoder. When the measurements in GKP error correction are noise-free, the threshold reaches σ ≈ 0.78 (bar{p}approx 15.12 %). The threshold reaches σ ≈ 0.34 (bar{p}approx 11.37 %) when all measurements are noisy. Through the above optimization method, multi-party quantum error correction will achieve a better guarantee effect in fault-tolerant quantum computing.

Quantum information is prone to suffer from errors caused by the so-called decoherence, which describes the loss in coherence of quantum states associated to their interactions with the surrounding environment. This decoherence phenomenon is present in every quantum information task, be it transmission, processing or even storage of quantum information. Consequently, the protection of quantum information via quantum error correction codes (QECC) is of paramount importance to construct fully operational quantum computers. Understanding environmental decoherence processes and the way they are modeled is fundamental in order to construct effective error correction methods capable of protecting quantum information. Moreover, quantum channel models that are efficiently implementable and manageable on classical computers are required in order to design and simulate such error correction schemes. In this article, we present a survey of decoherence models, reviewing the manner in which these models can be approximated into quantum Pauli channel models, which can be efficiently implemented on classical computers. We also explain how certain families of quantum error correction codes can be entirely simulated in the classical domain, without the explicit need of a quantum computer. A quantum error correction code for the approximated channel is also a correctable code for the original channel, and its performance can be obtained by Monte Carlo simulations on a classical computer.

Chapter 7 - Quantum Error Correction