- Conference Article
1
- 10.1115/icone22-31097
Loss of Representativeness of the Fixed Incore Instrumentation of the EPR™ Reactor
- Jul 07, 2014
- Volume 1: Plant Operations, Maintenance, Engineering, Modifications, Life Cycle and Balance of Plant; Nuclear Fuel and Materials; Plant Systems, Structures and Components; Codes, Standards, Licensing and Regulatory Issues
- Brice Jardiné + 2 more +2
The EPR™ reactor features a fixed incore instrumentation, composed of 72 Self Powered Neutron Detectors (SPND), that provides the online reconstruction of the core maximum Linear Power Density (LPD) and minimum Departure from Nucleate Boiling Ratio (DNBR). The Instrumentation and Control (I&C) systems of the EPR™ reactor use this online reconstruction in surveillance and protection functions. The onsite thresholds of those I&C functions have to take into account all the uncertainties affecting the online reconstruction of core power distribution measured by SPNDs. One of these uncertainties is the so-called Loss Of Representativeness (LOR). This uncertainty is defined as the difference between the LPD (respectively DNBR) physical value and the LPD (respectively DNBR) computed value using SPND signals. The LOR parameter is mostly linked to the difference between the core power distribution at the time where SPNDs are calibrated and the core power distribution at the time where their signals are used. For the DNBR, LOR also takes into account the use of a simplified on-line DNBR calculation algorithm. A statistical approach is used in order to define this uncertainty. The analysis is based on the evaluation of different sets of core power distributions generated thanks to random drawings of the plant state parameters (including power level, core inlet temperature, pressure, control rod insertion and xenon distribution). The sets of core configurations representative of normal plant operation are used to define the surveillance thresholds. The sets representative of accidental transients (for which the LPD and DNBR protections are claimed) are used to define the protection thresholds. The analysis of LOR values provides an envelop probability law covering a minimum of 95% of LOR values. In order to derive the on-site threshold for LPD and DNBR, a Monte Carlo method is used to propagate the LOR probability law and the other uncertainties. Sensitivity calculations have been performed in order to cover a large spectrum of fuel loading patterns and to take into account SPND failures. In conclusion, this approach allows defining an optimized and robust set of thresholds for the on-line surveillance and protection system of EPR™ reactor.
Read more