- Research Article
5
- 10.2139/ssrn.880930
Leading Indicators of Growth and Inflation in Turkey
- Jan 01, 2002
- SSRN Electronic Journal
- Daniel Leigh + 1 more +1
Leading Indicators of Growth and Inflation in Turkey
Short-term inflation forecasting models for Turkey and a forecast combination analysis
Leading Indicators of Growth and Inflation in Turkey
Leading Indicators of Growth and Inflation in Turkey
A Unified Framework of Third Order Time and Frequency Domain Analysis for Neural Spike Trains
Third order time and frequency analysis has exhibited great potential for correlation analysis of multi-sensor datasets, but is usually presented as separate time domain and frequency domain approaches. A combined framework of both frequency domain and time domain has rarely been used. This paper proposes a non-parametric third order time and frequency domain framework which used two dimensional Fourier transforms to bridge the gap between time domain and frequency domain. A unified framework offers flexibility and efficiency to apply to data. In this paper we study neural spike train data treated as stochastic point processes. In time domain direct analysis, third order cumulant densities of spike trains are applied, which need all first-, secondand third order product densities to be calculated before constructing the third order cumulant density, which brings additional challenges. The novelty in this study is that a new framework is proposed which can offer an alternative approach without calculating lower order quantities and can reveal nonlinear relationship between neural recordings. The results show that the present framework provides a novel non-parametric method to estimate both time and frequency domain measurements which is applicable to neural spike trains.
Read moreCombined Frequency Domain and Time Domain Airborne Data for Environmental and Engineering Challenges
We describe the main properties of the EQUATOR airborne geophysical system and how the system can be employed to solve some engineering and environmental problems. To date, the EQUATOR system has been used for groundwater search in 2014 and 2015 in Siberia. The name “EQUATOR” originates from the intention to EQUATE, or to balance time and frequency domain approaches in airborne electromagnetics, which is why the system was originally designed. To the best of our knowledge, EQUATOR is the only system to collect electromagnetic data both in time and in frequency domains. We further explain the difference between the two methods on some numerical and field examples. Also we describe some advantages of their coupling. In particular, by virtue of our approach, a numerically more robust solution of the one-dimensional electromagnetic inverse problem may be achieved. The recorded full-time measurements are further converted to in-phase, quadrature and off-time responses, as opposed to standard frequency or time domain solutions, which have been widely adapted within the industry. When inverting the data, our main focus is within the top 100 m of the Earth, which are the most relevant for engineering and environmental studies. We emphasize that a combined use of frequency and time domain data gives more detailed information about geological structures in the near-surface. As an example, we present some case studies obtained over a platform (Siberia) and a crystalline shield (Western Africa) setting. We further suggest using these results in such near-surface studies as sediment thickness estimation, soil state analysis, groundwater search, and geological structural analysis.
Read moreProblem of Uniqueness of Non-Linear Joint Parameter Identification by Force-State Mapping Without Knowing the Joint Model
The technique of Force-State Mapping is an important method to identify the parameters of non-linear joints. There are two approaches with the concept of Force-State Mapping, i.e., the time domain and frequency domain approaches. The advantages of the frequency domain approach compared to time domain approach are (1) the number of data points for identification can be drastically reduced; (2) it is possible to select arbitrarily the data in frequency domain for identification. In this work, an example is given to show that the above conclusion (i.e., the advantages of the frequency domain approach) is false. The result identified by the frequency domain approach is data and model dependent. One obtains different parameters when different data or model are used for identification. The reason for the non-uniqueness of the solution is that the joint force can’t be determined completely by a few discrete data in the frequency domain provided that the mathematical model of the joint is not exactly known in advance.
Read moreSine-Sweep qualification test for engine components: The choice of simulation technique
Sine-Sweep qualification test for engine components: The choice of simulation technique
Minimizing the Computational Effort to Optimize Solar Concentrators with the Open-Source Tools SunPATH and Tonatiuh++
Integrals that are of interest in the analysis, design, and optimization of concentrating solar thermal systems (CST), such as the annual optical efficiency of the light collection and concentration (LCC) subsystem, can be accurately computed or estimated in two distinct ways: on the time domain and on the spatial domain. This article explores these two ways, using a case study that is highly representative of the commercial CST systems being deployed worldwide. In the time domain, the computation of these integrals are explored using 1-min, 10-min, and 1-h solar DNI input data and using The Cyprus Institute (CyI)’s High-Performance Computing (HPC) system and an open-source ray tracer, Tonatiuh++, being actively developed at CyI. In the spatial domain, the computation of these integrals is explored using SunPATH, another open-source software tool being actively developed at CyI, in tandem with Tonatiuh++. The comparison between the time and spatial domain approach clearly indicate that the spatial domain approach using SunPATH is dramatically more computationally efficient than the time domain approach. According to the results obtained, at least for the case study analyzed in this article, to compute the annual energy delivered by the LCC subsystem with a relative error less than 0.1%, it is enough to provide SunPATH with 1-h DNI data as input, request from SunPATH the sun position and weights of just 30 points in the celestial sphere, and run Tonatiuh++ to simulate these 30 points using 15 million rays per run. As the test case is highly representative, it is expected that this approach will yield similar results for most CST systems of interest.
Read moreLong-range dependence in Indian stock market: a study of Indian sectoral indices
Purpose – The purpose of this paper is to test the efficient market hypothesis for major Indian sectoral indices by means of long memory approach in both time domain and frequency domain. This paper also tests the accuracy of the detrended fluctuation analysis (DFA) approach and the local Whittle (LW) approach by means of Monte Carlo simulation experiments. Design/methodology/approach – The author applies the DFA approach for the computation of the scaling exponent in the time domain. The robustness of the results is tested by the computation of the scaling exponent in the frequency domain by means of the LW estimator. The author applies moving sub-sample approach on DFA to study the evolution of market efficiency in Indian sectoral indices. Findings – The Monte Carlo simulation experiments indicate that the DFA approach and the LW approach provides good estimates of the scaling exponent as the sample size increases. The author also finds that the efficiency characteristics of Indian sectoral indices and their stages of development are dynamic in nature. Originality/value – This paper has both methodological and empirical originality. On the methodological side, the author tests the small sample properties of the DFA and the LW approaches by using simulated series of fractional Gaussian noise and find that both the approach possesses superior properties in terms of capturing the scaling behavior of asset prices. On the empirical side, the author studies the evolution of long-range dependence characteristics in Indian sectoral indices.
Read moreDynamic equivalent method of PMSG‐based wind farm for power system stability analysis
This study presents a dynamic equivalent method of wind farms with permanent magnetic synchronous generator (PMSG) wind turbines for power system stability analysis. First, a novel clustering indicator is set up based on the morphology similarity distance and cosine similarity between trajectories with the measurable output characteristics time series of wind turbines, and the K‐means algorithm is applied to cluster the PMSGs. Combining silhouette coefficient, the robustness analysis of the clustering method under different scenarios is adopted. In each cluster, a trajectory sensitivity based key parameters selection is introduced to reduce the control parameters to be identified. Moreover, a multi‐objective adaptive function is established and the multi‐controllers aggregated parameters are optimised by adaptive evolutionary particle swarm optimisation algorithm. Thus, a wind farm model represented by multi equivalent wind turbines is obtained. The IEEE 39‐bus system with a PMSG‐based wind farm is used as test system to verify the validity of the proposed dynamic equivalent approach in time domain and frequency domain, respectively. It has been demonstrated that the proposed model can reduce the model complexity and improve the calculation efficiency of wind farms.
Read moreComparing Time and Frequency Domain Heart Rate Variability for Deep Learning-Based Glucose Detection
Many researchers have been challenged by the usage of devices related to the Internet of Things in conjunction with machine learning to anticipate and diagnose health issues. Diabetes has always been a problem that society has struggled with. Due to the simplicity with which electrocardiograms can be captured and analysed, deep learning can be used to forecast a patient’s instantaneous glucose levels.Our solution is based on a unique method for calculating heart rate variability that involves segment identification, averaging, and concatenating the data to reveal better feature engineering results. Immediate plasma glucose levels are detected using short-term heart rate variability and applied a deep learning method based on Autokeras.In this paper. we address a research question to compare the predictive capability of time and frequency domain features for instantaneous glucose values. The neural architectural search for the time domain approach provided the best results for the 15-min electrocardiogram measurements. Similarly, the Frequency Domain approach showed better results on the same time frame. Regarding the time domain the best results are as follows: RMSE (0.368), MSE (0.193), R\(^2\) (0.513), and R\(^2\) loss (0.541). The best results for the Frequency Domain approach the best results are as follows: RMSE (0.301), MSE (0.346), R\(^2\) (0.45578), and R\(^2\) loss (0.482).KeywordsECGHRVDeep learningGlucoseDiabetes
Read moreTime domain buffeting analysis of long suspension bridges under skew winds
This paper presents a time domain approach for predicting buffeting response of long suspension bridges under skew winds. The buffeting forces on an oblique strip of the bridge deck in the mean wind direction are derived in terms of aerodynamic coefficients measured under skew winds and equivalent fluctuating wind velocities with aerodynamic impulse functions included. The time histories of equivalent fluctuating wind velocities and then buffeting forces along the bridge deck are simulated using the spectral representation method based on the Gaussian distribution assumption. The self-excited forces on an oblique strip of the bridge deck are represented by the convolution integrals involving aerodynamic impulse functions and structural motions. The aerodynamic impulse functions of self-excited forces are derived from experimentally measured flutter derivatives under skew winds using rational function approximations. The governing equation of motion of a long suspension bridge under skew winds is established using the finite element method and solved using the Newmark numerical method. The proposed time domain approach is finally applied to the Tsing Ma suspension bridge in Hong Kong. The computed buffeting responses of the bridge under skew winds during Typhoon Sam are compared with those obtained from the frequency domain approach and the field measurement. The comparisons are found satisfactory for the bridge response in the main span.
Read moreFrequency versus time domain parameter estimation: Application to a slot milling operation
Frequency versus time domain parameter estimation: Application to a slot milling operation
Distributions of forecasting errors of forecast combinations: Implications for inventory management
Distributions of forecasting errors of forecast combinations: Implications for inventory management
On the Fatigue of Ship-Structures under Wave Loads
Background: Fatigue damage is one of the main failure modes in ship structures. This type of damage usually starts from weak point of the structure as welded joints, sites of stress concentrations and cracks, whose propagation can lead to the failure of the ship structures. Cyclic loadings that ships encounter during their service life are one of the main causes that can produce fatigue damage, especially loads due to wave, mainly analyzed in this work. Once the crack is started, also lower stress cycles, which would have negligible effects on intact components, can propagate the crack. Objective: This paper wants to resume the most used fatigue strength assessment approaches, in order to analyze drawbacks and advantages and to provide the necessary background knowledge for the development of a future and reliable theoretical/numerical models for predicting the fatigue life of ship structures subjected to collision events and different sea states. Methods: This scientific work will thus consider the main theoretical approaches in time and frequency domain by using energy spectral methods. Collision rules are also assessed to check the hull girder ultimate bending capacity in the damaged state. Results: Cyclic stresses determination in specific structural details of the hull girder and welded joints is discussed, in order to evaluate the relevant maximum stress range useful for the subsequent fatigue studies, performed by finite element analysis. In a collision scenario, also in minor damages, fatigue cracks may appear and propagate, reducing structural strength and structures fatigue life. Conclusion: Structural loads determination can be categorized in different methods, but the frequency-domain method is the most extensively used methods in fatigue analysis procedure, because it requires significantly less computational efforts than the time-domain method. Once determined the stress distribution, in most cases fatigue damage is calculated using the Palmgren–Miner cumulative damage rule in combination with the S–N curves of materials, structural details and welded joints. In a scenario where a damaged ship encounters large wave amplitudes, the damage accumulation could lead to low-cycle fatigue.
Read moreA multivariate time series forecast model for wind and storage integrated system operation
A multivariate time series wind power forecast model, dynamic factor model (DFM), is proposed to tackle a stochastic dynamic optimal power flow (OPF) problem integrated with wind energy and storage devices in this paper. The uncertainty of wind power forecasting is represented by a set of scenarios generated by the DFM. As opposed to other common methods of generating scenarios, such as Monto Carlo simulation, the DFM considers the spatial correlations among wind farms, which manifests a more accurate and real situation. DFM models the wind power as a multivariate stochastic process, which can be decomposed as the multiplication of fixed polynomial matrices and dynamic shocks. Such dynamic shocks are spatially and temporally uncorrelated white noises which in turn become the impulses to generate forecast scenarios. The stochastic optimization is to minimize the total expected generating cost over all scenarios in one day ahead. Storage devices are installed to compensate for the operation cost and power deficiency. The proposed forecast model is verified in both time and frequency domain, and stochastic optimization model is tested over modified IEEE 30-bus system.
Read moreSpeech and Music Classification and Separation: A Review
Speech and Music Classification and Separation: A Review