• Home
  • Search
  • Simulation and Optimization of Sand Mixing Device
  • https://doi.org/10.62381/i245908Copy DOI Icon

Simulation and Optimization of Sand Mixing Device

Show More
  • Abstract
  • Literature Map
  • Similar Papers
Abstract

In response to the requirements for rapid mixing and erosion resistance of sand mixing devices used in hydraulic fracturing at high flow rates, computational fluid dynamics methods and discrete multiphase flow models were used to conduct three-dimensional unsteady simulations of the internal flow field of commonly used typical sand mixing devices. The mixing efficiency and sand particle motion trajectory were obtained, and the erosion wear on the inner wall of the sand mixing device was obtained through the DPM erosion model. On this basis, the influence of blade quantity, length, and angle on the erosion and wear life of the device is explored. The research results indicate that the optimal combination of 4 long and 4 short blades with an inclination angle of 60 ° increases the erosion life by 54% with an increase in the number of blades and the structure of the long and short blades. At this point, the lifespan of the impeller mixed with sand is 401 hours.

Similar Papers
  • Research Article
  • Citations2

CFD Optimization Analysis of a Cooling Fan for Mining Dump Truck

  • Aug 01, 2013
  • Applied Mechanics and Materials
  • Jue Yang +2
  • Research Article
  • Citations7

Optimizing the aerodynamic performance of archimedes spiral wind turbines: A parametric study on blade angle and length at constant radius

  • Sep 01, 2025
  • Results in Engineering
  • Ahmed Essa Faisal +4
  • Research Article

Computational Fluid Dynamics Analysis of Aerodynamic Characteristics in a Small-Scale Horizontal-Axis Wind Turbine

  • Apr 20, 2026
  • Wind
  • Faisal Mahmuddin +5
  • PDF
  • Research Article
  • Citations1

Optimization Analysis of Pretreatment Device Structural Parameters for Low-Concentration CBM Utilization

  • Aug 22, 2022
  • Geofluids
  • Lu Xiao
  • PDF
  • Research Article
  • Citations8

Measurement and simulation of fluid flow field in the pipe of magnetic capsule robot

  • Dec 01, 2014
  • Advances in Mechanical Engineering
  • Tang Puhua +2
  • Research Article
  • Citations3

Optimizing turbine meter performance through geometrical parameter analysis: A simulation-based approach using TOPSIS

  • Aug 30, 2024
  • Flow Measurement and Instrumentation
  • Mona Mohammadi Neyshaburi +2
  • Research Article

Investigation of the influence of the propeller blade profile and angle of attack on the performance parameters of an aircraft piston engine

  • Sep 22, 2025
  • Combustion Engines
  • Piotr Wróblewski +2
  • PDF
  • Research Article
  • Citations11

Multiobjective Optimization of Low-Specific-Speed Multistage Pumps by Using Matrix Analysis and CFD Method

  • Jan 01, 2013
  • Journal of Applied Mathematics
  • Qiaorui Si +4
  • Research Article
  • Citations1

Influence of Gas Content on Performance Effect on Shunt Vane Type Aviation Fuel Pump

  • Mar 31, 2022
  • International Journal of Fluid Machinery and Systems
  • Zixuan Xu +5
  • PDF
  • Research Article
  • Citations6

The influence of splitter blades and meridional profiles on the performance of small-scale turbopumps for ORC applications; analysis, neural network modeling and optimization

  • Mar 01, 2023
  • Thermal Science and Engineering Progress
  • Sajjad Zakeralhoseini +1
  • Research Article
  • Citations4

Archimedes Screw Turbines (ASTs) Performance Analysis using CFD Software Based on Variation of Blades Distance and Thread Number on The Pico Hydro Powerplant

  • Apr 30, 2022
  • International Journal of Advanced Technology in Mechanical, Mechatronics and Materials
  • Bambang Darmono +1
  • PDF
  • Research Article
  • Citations12

Effect of the number of blades on undershot waterwheel performance for straight blades

  • Feb 01, 2020
  • IOP Conference Series: Earth and Environmental Science
  • Dendy Adanta +4
  • Research Article
  • Citations58

Blade number effect for a ducted wind turbine

  • Oct 01, 2008
  • Journal of Mechanical Science and Technology
  • Sheng-Huan Wang +1
  • Research Article
  • Citations24

Inducer Design to Avoid Cavitation Instabilities

  • Dec 01, 2009
  • International Journal of Fluid Machinery and Systems
  • Dong-Hyuk Kang +5
  • PDF
  • Research Article
  • Citations5

Numerical Investigation of Erosion Wear Characteristics of Hydraulic Spillway

  • Aug 31, 2021
  • Applied Sciences
  • Cong Zhang +4
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.