Simulation of bridge pier scour depth base on geometric characteristics and field data using support vector machine algorithm

According to statistics from the Global Burden of Cancer Study (Globocon) of the World Health Organization (WHO), cancer, particularly breast cancer, is a severe health issue in Indonesia with 68,858 new cases and 22,000 deaths recorded in 2020. Ultrasonography (USG) technology is acknowledged as one of the potentials to support early detection, which is vital in reducing mortality from breast cancer. This study focuses on classifying ultrasound images using the Support Vector Machine (SVM) algorithm, GLCM feature extraction, Min-Max normalization, and Mutual Information with SelectKBest Feature Selection. From several experiments using the SVM algorithm with various combinations of parameter values that have been set and different Tests, namely using a Train/Test Split with a proportion of 80/20 and K-Fold Cross Validation, it shows that the SVM algorithm is capable of classifying ultrasound images of breast cancer. into two categories (Benign Tumor and Malignant Tumor) with the same maximum accuracy of 79% after applying the SMOTE Balancing Data technique or without using the Balancing Data technique. As a result, the Support Vector Machine (SVM) algorithm has the potential to be an effective model for identifying breast cancer ultrasound images, both on data from the original set that has not been balanced and data from the set that has been balanced.

Aim: prediction of coronary disease using novel support vector machine and comparing its accuracy with logistic regression algorithm. Materials and methods: Two social affairs are proposed for predicting the accuracy (%) of coronary disease. To be explicit, the novel supports vector machine and logistic regression algorithms. Here we take 20 samples each for appraisal and compare. The sample size was calculated using G power with pretest power at 80% and the alpha of 0.05 value. Result: The logistic regression gives better precision (87.82%) than the novel support vector machine (SVM) accuracy (81.30%). Thus the real significance of logistic regression is better than novel support vector machine algorithms. Conclusion: From the result, it might be gathered that logistic regression helps in expecting the coronary sickness with more accuracy to appear differently in relation to novel support vector machine algorithms.

In order to improve the accuracy of the prediction model of lung tuberculosis, a prediction model of lung tuberculosis based on grayscale mixed nucleus AR-SVM model is proposed in the Thesis. First, early warning model of the incidence trend of lung tuberculosis was constructed by using support vector machine (SVM) algorithm which includes two circumstances. One is that there is no extreme risk preference; the other is that there is extreme risk preference. And the searching was conducted in the optimum sorting process in training set based on SVM algorithm; Secondly, aimed at the problem that early warning of extreme risk preference of SVM model is easily out of order in the prediction of incidence trend of lung tuberculosis, data record of incidence trend of lung tuberculosis was preprocessed by using improved SVM model and SVM algorithm was improved by polynomial kernel SVM, which achieved improvement of prediction performance of autoregression model of sample data; finally, the effectiveness of algorithm is verified by positive analysis.

Government policy regarding the discourse on the use of renewable energy in electricity, this discourse is widely discussed in the community, especially on social media twitter. The public's response to the implementation of the use of renewable energy varies, there are positive, negative and neutral responses to this government policy. Sentiment analysis is part of Machine Learning which aims to identify responses in the form of text. The data used in this study amounted to 1,367 tweets. The purpose of this study is to determine the sentiment analysis of government discourse related to the use of renewable energy using an optimisation-based Support Vector Machine (SVM) algorithm approach. This research involves several stages including data collection, data pre-processing, experiments and modelling and evaluation. The data is divided into 3 classes, 120 positive, 1221 neutral and 26 negative. In this research, there are five optimisation models used namely Forward Selection, Backward Elimination, Optimised Selection, Bagging and AdaBoost. The results obtained are the use of Optimised Selection (OS) optimisation with the Support Vector Machine (SVM) algorithm obtained an increase in accuracy from 93% to 96%. The increase in the use of SVM using selection optimization obtained the highest increase, because other optimization techniques only reached 1% and 2% of the original results using the SVM algorithm, namely the accuracy value of 93% to 96% (high accuracy). From the research that has been done, it is certainly important to understand public sentiment towards renewable energy policies, especially renewable energy electricity, the hope is that this research will become a reference for the government.

In this study, a data-driven fault diagnosis method was developed for solid oxide fuel cell (SOFC) systems. First, the complete experimental data was obtained following the design of the SOFC system experiments. Then, principal component analysis (PCA) was performed to reduce the dimensionality of the obtained experimental data. Finally, the fault diagnosis algorithms were designed by support vector machine (SVM) and BP neural network to identify and prevent the reformer carbon deposition and heat exchanger rupture faults, respectively. The research results show that both SVM and BP fault diagnosis algorithms can achieve online fault identification. The PCA + SVM algorithm was compared with the SVM algorithm, BP algorithm, and PCA + BP algorithm, and the results show that the PCA + SVM algorithm is superior in terms of running time and accuracy, the diagnosis accuracy reached more than 99%, and the running time was within 20 s. The corresponding system optimization scheme is also proposed.

Dilihat dari sisi konsumen, ada berbagai aspek yang mempengaruhi konsumen untuk membeli suatu kendaraan bermotor. Hal ini karena masing-masing orang memiliki minat dan kebutuhan yang berbeda. Oleh karena itu, tujuan dari penelitian ini adalah untuk mengetahui kelompok umur dan profesi apa saja yang menjadi pelanggan potensial di SPS Motor Honda Lombok Timur. Metode penelitian yang digunakan adalah metode analitik deskriptif, dimana peneliti mengambil data-data penjualan sepeda motor dari SPS Motor Honda Lombok Timur, yang selanjutnya diolah dan dianalisis menggunakan software Rapidminer 5. Hasil analisis data tersebut selanjutnya dideskripsikan dengan detail mengenai kelompok pelanggan potensial. Berdasarkan analisis yang telah dilakukan, dapat ditarik kesimpulan bahwa kelompok yang termasuk dalam pelanggan potensial dari SPS Motor Honda Lombok Timur adalah kelompok dengan kriteria umur berkisar 33-46 tahun yang berprofesi sebagai wiraswasta dan petani, Hal ini disebabkan karena, pelanggan tersebut memiliki penghasilan dengan usia produktif. Sedangkan kelompok pelanggan yang tidak potensial ada 2 irisan yaitu yang pertama apabila kategori usia produktif tapi tidak memiliki penghasilan dengan rentang umur 17-32 tahun dengan profesi pelajar dan wiraswasta. Kedua yaitu, apabila kategori usia tidak produktif dengan rentang usia 47-73 tahun dan tidak memiliki penghasilan dengan profesi petani dan wiraswata.DOI : 10.29408/jit.v2i2.1447

For a commodity, in addition to its quality, its external package is also very essential. This paper briefly introduced the intelligent support vector machine (SVM) algorithm for color design of paper packaging. The features were extracted from photos of packages using scale-invariant feature transform (SIFT), and the intelligent algorithm was trained and tested using photos of paper packaging for ceramic products collected at the ceramic crafts market as a sample set. Two paper package schemes designed in this study were used for further test. The SVM algorithm was compared with the back-propagation (BP) algorithm and the convolutional neural network (CNN) algorithm. The results showed that the three intelligent algorithms could evaluate the color design of paper packages, but the SVM algorithm was more accurate than the BP and CNN algorithms in evaluating the imagery of color design, both for the samples collected in the craft market and for the paper packaging scheme designed in this paper.

The main problem in producing high accuracy software defect prediction is if the data set has an imbalance class and dichotomous characteristics. The imbalanced class problem can be solved using a data level approach, such as resampling methods. While the problem of software defects predicting if the data set has dichotomous characteristics can be approached using the classification method. This study aimed to analyze the performance of the proposed software defect prediction method to identify the best combination of resampling methods with the appropriate classification method to provide the highest accuracy. The combination of the proposed methods first is the resampling process using oversampling, under-sampling, or hybrid methods. The second process uses the classification method, namely the Support Vector Machine (SVM) algorithm and the Logistic Regression (LR) algorithm. The proposed, tested model uses five NASA MDP data sets with the same number attributes of 37. Based on the t-test, the < = 0.0344 < 0.05 and the > = 3.1524 > 2.7765 which indicates that the combination of the proposed methods is suitable for classifying imbalanced class. The performance of the classification algorithm has also improved with the use of the resampling process. The average increase in AUC values using the resampling in the SVM algorithm is 17.19%, and the LR algorithm is at 7.26% compared to without the resampling process. Combining the three resampling methods with the SVM algorithm and the LR algorithm shows that the best combining method is the oversampling method with the SVM algorithm to software defects prediction in imbalanced class with an average accuracy value of 84.02% and AUC 91.65%.

Traction machine is the power source of traction elevator, through fault diagnosis of traction machine can effectively reduce the occurrence of elevator safety accidents. In view of the problems of weak fault characteristics of traction machine and the influence of the vibration signal by the transmitting path, which lead to the poor diagnosis effect, a vibration signal acquisition scheme and fault diagnosis method of elevator traction machine based on improved Complementary Ensemble Empirical Mode Decomposition (CEEMD) and Support Vector Machines (SVM) Algorithm are proposed. Firstly, the vibration signal acquisition scheme of traction machine is designed by finite element simulation of vibration response of traction machine by Abaqus. A fault diagnosis method based on improved CEEMD and SVM Algorithm is proposed to solve the problem of weak fault feature and poor fault diagnosis effect of traction machine. The improved CEEMD method introduces the integrated fault factors to calculate the fault feature correlation degree of each IMF component, and sorts them according to the integrated fault factors from large to small, the Intrinsic Mode Functions (IMF) with larger integrated fault factors is selected and its time-frequency characteristic is calculated to construct the feature vector, and then the tractor fault is identified and classified by SVM. Finally, the effect and recognition rate of this method and the unimproved CEEMD method are compared by fault injection test. Experimental results show that the CEEMD method based on integrated fault factors can effectively extract the fault features of the tractor and improve the recognition rate of the tractor fault diagnosis.

Abstract. Hartoni, Siregar VP, Wouthuyzen S, Agus SB. 2021. Object based classification of benthic habitat using Sentinel 2 imagery by applying with support vector machine and random forest algorithms in shallow waters of Kepulauan Seribu. Biodiversitas 23: 514-520. Benthic habitats have very high complexity and are home to many types of aquatic organisms. Benthic habitats have various functions, including habitat for flora and fauna, sediment traps, nursery areas, and foraging areas for aquatic fauna that are susceptible to damage due to human activities or natural factors. Therefore, more accurate spatial information is needed. The purpose of this study was to examine the ability of object-based classification techniques for mapping shallow waters benthic habitats using Sentinel 2A imagery. The two classification algorithms used are support vector machine (SVM) and random forest (RF). The input image layer (IIL) used for classification is the natural color band (Band 432). The results showed that the SVM and RF classification algorithms could classify eight classes of benthic habitats. The overall accuracy (OA) of the SVM algorithm is 65%, while the RF accuracy is 67%, with kappa values of 0.59 and 0.60, respectively. The significant test applied to Sentinel 2 images with SVM and RF algorithms for benthic habitats has a Z test value of-0.41. These results indicate that the classification results between the SVM and RF algorithms are not significantly different.

The study was intended to eliminate the noise in three-dimensional transvaginal ultrasound (3D-TVS) images and improve the diagnostic accuracy in intrauterine adhesion (IUA). The extreme learning machine (ELM) algorithm was introduced first for statement. One hundred and thirty cases of suspected IUA patients were taken as the research subjects. The denoising effects of ELM algorithm were evaluated in terms of mean square errors (MSE), peak signal-to-noise ratio (PSNR), and running time, and its diagnostic efficiency of IUA was identified from precise, specificity, and sensitivity. Furthermore, the support vector machine (SVM) algorithm was introduced for comparison. It was found that the MSE and PSNR of the ELM algorithm were 0.0021 and 64.5, respectively, and its average operation time was 11.22 ± 0.89s, that the MSE values of SVM algorithm and ELM algorithm were 0.0045 and 0.0021 and the PSNR values were 52.3 and 64.5, respectively, and that the average running time of SVM algorithm was 16.35 ± 1.33s, and the average running time of ELM algorithm was 11.22 ± 0.89s, superior to the SVM algorithm in denoising effects. Moreover, the ELM algorithm showed excellent diagnostic efficiency for patients with various degrees of IUA. In conclusion, ELM can effectively eliminate noise in 3D-TVS images and demonstrates excellent diagnostic efficiency on IUA, which is worthy of clinical application.

The aim of this article is to measure the performance metrics of an accuracy, sensitivity and specificity of the Novel Support Vector Machine (SVM) algorithm for diabetics detection and compared with a K Nearest Neighbour (KNN) algorithm. Materials and Methods: A total of 768 samples are collected from diabetics detection datasets found in kaggle. These samples are divided into a training dataset (n=500) and test dataset (n=268). Results: By comparing the Novel Support Vector Machine with KNN. The SVM has achieved better accuracy and specificity than the KNN and the KNN has better Sensitivity than the SVM algorithm. The output values of accuracy, specificity and sensitivity of the SVM are 79%, 93% and 58%. The output values of accuracy, specificity and sensitivity of the KNN algorithm are 63%, 39% and 100%. The significance value is Pi0.05. The G power is taken as 0.8. Conclusion: The output values of accuracy, specificity and sensitivity of the Novel SVM are 79%, 93% and 58%. The output values of accuracy, specificity and sensitivity of the KNN algorithm are 63%, 39% and 100

Fusion of diverse data sources for flood extent mapping and risk assessment in Sindh: A comparative study of inundation mapping approaches

In the past few decades, the internet has become an inseparable part of human life. It provides ease of access and permeates almost every aspect of human existence. One of the internet platforms that is widely used by people around the world is social media. Apart from being spoiled with the convenience and efficiency offered by social media to support daily life, it has gained popularity among a wide audience. This has positive implications when utilized effectively, but it cannot be denied that there are negative consequences if not utilized properly. One such consequence is the prevalence of cyberbullying activities on social media. Cyberbullying has become a major concern for the public and social media users, prompting researchers to leverage information technology in developing technologies that can identify the elements of cyberbullying, particularly on social media platforms. Sentiment analysis has been employed by researchers to identify the components of cyberbullying in online platforms. Sentiment analysis involves the application of natural language processing techniques and text analysis to identify and extract subjective information from text. This study aims to compare the Naive Bayes algorithm and the Support Vector Machine algorithm, while utilizing feature selection, specifically chi-square, to enhance the accuracy of both algorithms in classifying Instagram comments. The experimental results indicate that the Multinomial Naive Bayes (MNB) algorithm outperforms the Support Vector Machine (SVM) algorithm, achieving an accuracy of 83.85% without feature selection and 90.77% with feature selection. Meanwhile, SVM achieves an accuracy of 82.31% without feature selection and 90% with feature selection. Evaluation through the confusion matrix and classification report reveals that MNB exhibits better precision and recall rates compared to SVM in identifying bullying and non-bullying classes. The use of feature selection enhances the performance of both algorithms in classifying Instagram comments related to cyberbullying.

Portable Document Format (PDF) files as well as files in several other formats such as (.docx, .hwp and .jpg) are often used to conduct cyber attacks. According to VirusTotal, PDF ranks fourth among document files that are frequently used to spread malware in 2020. Malware detection is challenging partly because of its ability to stay hidden and adapt its own code and thus requiring new smarter methods to detect. Therefore, outdated detection and classification methods become less effective. Nowadays, one of such methods that can be used to detect PDF files infected with malware is a machine learning approach. In this research, the Support Vector Machine (SVM) algorithm was used to detect PDF malware because of its ability to process non-linear data, and in some studies, SVM produces the best accuracy. In the process, the file was converted into byte format and then presented in Byte Frequency Distribution (BFD). To reduce the dimensions of the features, the Sequential Forward Selection (SFS) method was used. After the features are selected, the next stage is SVM to train the model. The performance obtained using the proposed method was quite good, as evidenced by the accuracy obtained in this study, which was 99.11% with an F1 score of 99.65%. The contributions of this research are new approaches to detect PDF malware which is using BFD and SVM algorithm, and using SFS to perform feature selection with the purpose of improving model performance. To this end, this proposed system can be an alternative to detect PDF malware.