Simulation of Experimental Data Based Inertial Navigation Systems Errors Estimation Algorithms

Adaptive Kalman filters (AKF) have been widely applied to the inertial navigation system (INS)/global navigation satellite system (GNSS) integrated navigation system. However, the traditional AKF methods suffer from the problems of filtering instability or covariance underestimation, especially when the GNSS measurement disturbances occur. In this paper, an enhanced redundant measurement-based AKF is developed to improve the filtering performance. The scheme is based on the mutual difference sequence derived from the redundant measurement of INS. By using the mutual difference sequence, the measurement noise covariance can be estimated without being affected by the inaccuracy estimates, hence avoiding the risk of filtering divergence. In addition, the kernel density estimation is used to estimate the GNSS measurement noise’s probability density to detect whether the Gaussian properties of the measurement noise are maintained. When the noise statistics are far from Gaussian distribution, the difference sequence will be modeled as an autoregressive process using the Burg’s method. The real variance of the difference sequence can then be updated relying on the autoregressive model in order to avoid the covariance underestimation. A field experiment was carried out to evaluate the performance of the proposed method. The test results demonstrate that the proposed method can effectively mitigate the GNSS measurement disturbances and improve the accuracy of the navigation solution.

Navigation systems for ships mainly include inertial navigation system (INS), “BeiDou” satellite navigation system, Global Positioning System (GPS), and Doppler navigation system and so on. The characteristics of each system are different. In order to improve the accuracy and fault-tolerant ability of naval-ship navigation system, an integrated navigation algorithm based on Measurement-based adaptive Kalman filtering algorithm (MAKF), improved Suge-Husa algorithm and non-reset federated Kalman filter structure is proposed in this paper. The algorithm uses the short-term high precision of the inertial navigation system and the prior velocity information of the ship to adaptively estimate the measurement noise characteristics of the satellite navigation system. When the satellite navigation system is unable to locate, the INS and the log are combined with the help of the prior velocity information. The simulation results show that the algorithm can effectively exploit the characteristics of each navigation system, and can output high-precision navigation results even when the GPS/BeiDou satellite navigation system fails.

Integration of Global Positioning System (GPS) and Inertial Navigation System (INS) are very practical method to get high precision navigation. GPS/INS data Fusion in navigation has been a research topic for decades. Usually the update time of GPS an INS is different. The update time of GPS is 20HZ, and the time of INS is 100HZ or higher. Since GPS and INS are mainly methods in navigation system. Techniques of fusing GPS and INS data are in high demand in navigation industry. Usually the Karman filter is used to fuse the data from GPS and INS. But the Kalman filter is model-dependent and a priori the model parameters need to be known. In this work, a generic and intelligent approach of GPS and INS data fuse using fuzzy interpolation before Kalman algorithm is proposed. First a simplified interpolation model is introduced in a ordinary GPS and INS data fusion. Second a fuzzy rule-based system is established to fuzzy interpolation with objective fuzzy method. Then the parameters of objective fuzzy system are identified, the best n-rule is determinate and the optimal rule base system is found. Finally this approach is applied on an example for a car GPS and INS data fusion, and the results are calculated with computer system to demonstrate the advantages of this approach.

How to achieve continuous, reliable and accurate positioning performance using low-cost sensors is one of the main challenges for aviation navigation system. Global Positioning System (GPS) can provide the primary means of navigation in a number of aviation navigation applications (e.g., manned and unmanned aircraft vehicle, airport ground vehicle). However, GPS signal deteriorations typically occur due to aircraft itself during maneuvering, ionospheric scintillation, Doppler shift, multipath and so on. Thus, there is a need to research GPS augmentation strategies which can be used in the Communication, Navigation, Surveillance/Air Traffic Management. GPS integration with Inertial Navigation system (INS) is one of the key strategies. But once GPS signal outages, the integrated navigation system works in pure INS, and positioning accuracy deteriorates with time. When using low cost GPS/INS integration, a primary problem is the rapid performance deteriorate during GPS outages. To provide continuous, accurate and reliable positioning information in aviation, discrete grey prediction model (DGPM) aided fusion methodology is proposed. The DGPM provides pseudo-GPS position information for INS during GPS outages. The mathematical model of integrated navigation system is established, including INS error equations, Kalman filter and DGPM. The model works in the update mode when there is no GPS failure, whereas it switches to the prediction mode in case of GPS outages. To verify the feasibility and effectiveness of the proposed methodology, real road test is performed. The comparison results show that accuracy of longitude and latitude are improved by more than 80% and 70%, respectively. The DGPM can effectively provide position corrections for standalone INS during GPS outages.

In present days, real time navigation depends on Kalman filter to fuse data from Global Positioning System (GPS) and Inertial Navigation System (INS). But there exist drawbacks like long design time, requirement of prior knowledge in fusing data from GPS and INS using Kalman Filter. In order to overcome the drawbacks of Kalman filter, GPS and INS integration are done using Artificial Neural Networks (ANN) like FFNNs. But still there exists certain drawbacks like less accuracy in FFNNs for GPS and INS data integration. Therefore, this paper introduces Higher Order Neural Networks (HONNs) approach for INS and GPS data integration to overcome the drawback. A higher order feed forward neural network architecture with optimum number of nodes is used. In the given architectures, the replacement of summation at each node by multiplication results in more powerful mapping, because of its capability of processing higher-order information from training data. Performance comparison of HONNs with FFNNs shows that the proposed architecture provides satisfactory results in terms of error rate and number of epochs. The HONNs like Multiplicative Neural Network (MNN) module and Sigma-Pi-ANN module and Traditional Feed Forward Neural Networks(FFNNs) like Radial Basis Function Neural Network (RBF) module and Back propagation Neural Network (BPN) module are trained to predict the INS position error and provide accurate position of the moving aircrafts. Sigma-Pi ANN is found to be the best in terms of accuracy, number of epochs and execution time among the two HONNs.

An expanded form of the third-order Markov undulation model is developed which includes undulation of the geoid, vertical deflections, gravity anomaly, and the anomalous gravity gradients. First, the complete set of autocorrelation and cross-correlation functions, as specified by the autocorrelation of undulation, is obtained. Then, a time-domain approach is used to synthesize the corresponding linear system driven by white noise that represents the anomalous gravity field behavior along a straight horizontal track. The resulting nine-state Markov model provides a shaping filter for applying covariance analysis and optimal estimation techniques to inertial navigation and gravity gradiometry systems analysis. ONTINUED mechanical refinement has brought inertial navigation technology to the stage where unmodeled variations in the Earth's gravity field have become significant and sometimes dominant error sources.1 At the same time, inertial navigation system analysts have been facing the task of developing error models to evaluate the impact of gravity uncertainties on navigation system performance. Ad- ditionally, the development of gravity gradiometers has made it necessary to model gravity-gradient signals to specify sensor requirements and analyze gradiometer-aided inertial navigation or gradiometry survey performance. To apply the powerful tools of linear system theory and Kalman filtering, it has become common to consider gravity uncertainties random variables, and to model them as Markov processes. Following the first treatment of vertical deflections as a first-order Markov process,2 a succession of higher order Markov models was proposed culminating with the third- order Markov undulation model3'4 which is fully self- consistent; that is, the auto- and cross-correlation functions of undulation, vertical deflections, and gravity anomaly obey and are derived according to the mathematical relationships of physical geodesy. The motivation for using Markov models for gravity un- certainties is that they can be cast in the form of linear dif- ferential equations driven by white noise. This allows use of the model as a shaping filter in covariance analysis of linear dynamic systems, Kalman filters, and optimal smoothing algorithms. The expanded third-order Markov undulation model described in this paper is derived from the original version, but it has three differences. First, it was found that the original model could easily be extended to include all the anomalous gravity gradients by continued differentiation of auto- and cross-correlation functions. Second, the exact cross-correlation function between undulation and gravity anomaly contains modified Bessel functions.4 Modified Bessel functions are solutions to a class of differential equations whose coefficients are functions of the independent variable. To obtain a Markov shaping filter, it is necessary to substitute an approximate function which is the solution to a linear differential equation with constant coefficients. While the chosen exponential form did not approximate the exact Bessel function as well as at first hoped possible, it provides a suitable representation of the un- dulation-gravity anomaly cross-correlation.

In this study, the integrated navigation system, consisting of radio and inertial navigation system (INS) altimeters, is presented. INS and the radio altimeter have different benefits and drawbacks. The integration is achieved by using an indirect Kalman filter. Hereby, the error models of the navigators are used by the Kalman filter to estimate vertical channel parameters of the navigation system. In the open loop system, INS is the main source of information, and radio altimeter provides discrete aiding data to support the estimations. At the next step of the study, in case of abrupt faults, the performance of the integrated system is examined. The optimal Kalman filter reacts with abnormal estimates to this situation as expected. To recover such a possible malfunctioning, the robust Kalman filter algorithm is suggested.

This paper describes the theoretical and practical stages through development to testing of an integrated navigation system, specifically composed of an Inertial Navigation System (INS), and Global Positioning System (GPS). Among various INS/GPS integration strategies, our aim is to construct a mathematical model of INS and GPS systems. A Kalman filter is designed and implemented depending upon these models. Besides these, the performance of the developed system is evaluated with real data recorded by the sensors. A comparison with a reference system and also with a loosely coupled system is done to show the Superiority of the tightly coupled structure. The strap down inertial navigation system (SINS) uses (ENU) frame and the integrated system uses position and velocity as measurements. The system model of the integrated system for Kalman filtering are derived and modeled as 27-states. These states estimation system showed clearly the application of fundamental modeling and filtering techniques. The simulation is built on the integrated system INS/GPS/GNSS and the trajectory generator data for flight simulation to be used as a base line algorithm contributing for design, analysis and develop a guidance and control strategy which compensates for the effects of the uncertainties accompanying the navigation systems produced by INS alignment.

With the development of the intelligent vehicle navigation systems and vehicle networking systems, vehicle positioning and state estimation become very important. This paper investigates the integration of Global Positioning System (GPS), Inertial Navigation System (INS) and Dead Reckoning based on Anti-lock Braking System (ABSDR) positioning based on Kalman filter, and aims at achieving full-time vehicle positioning. In this paper, we use Kalman Filter to estimate INS positioning error based on GPS or ABSDR solution, take the INS solution compensated with estimated error as system output. This paper introduces INS positioning algorithm, dead reckoning method based on the ABS wheel speed and Kalman filtering method. After that, simulation analysis and experimental verification of the positioning algorithm are carried out. The results show that the system output high-precision high-frequency positioning information when GPS is available, and when GPS is unavailable, INS positioning errors can be compensated well with ABSDR introduced, achieving the full-time positioning of the vehicle.

Attitude estimation is essential for inertial navigation system. When the external acceleration is significant, great errors are introduced into measurements, which is one of the main sources of performance loss in inertial navigation system. This paper addresses two problems: one is the error calibration of inertial sensors, the other is attitude estimation during large external acceleration occurs. A maximum likelihood estimation algorithm is introduced for sensors calibration and a quaternion-based adaptive kalman filter is designed for compensating external acceleration from the residual. The adaptive algorithm is to improve the performance of classical kalman filter in various dynamic conditions. Simulation results suggest that the proposed algorithm can estimate the attitude of projectile accurately under accelerative environment, with superior performance over the classical quaternion-based kalman filter.

The needle puncture technology is one of the simplest minimally invasive medical procedures. Due to the asymmetry of the needle tip, the lateral force exerted by the tissue causes the tip to deflect and reaches the target position. It is important to maintain the needle tip in a desired plane in 2D control. In the process of puncture, the position is measured and the posture of the needle tip needs to be estimated in real time. Three estimation algorithms for estimating the states of the needle tip are employed in this paper. The first algorithm is adaptive Kalman filter (AKF), which is applied to the statistical properties of the noise is not completely known. The second is unscented Kalman filter (UKF). The last one is the combination of AKF and UKF, called adaptive unscented Kalman filter (AUKF) which combines the advantages of both. It should be noted that AKF is based on the feedback linearization model, but UKF and AUKF are directly based on the nonlinear model. On the base of analysis of three estimation algorithms, we study the control method. In this work, we estimate the states via the three methods and analyze the results. The simulation results of the estimation algorithms and the control method illustrate the differences between the three algorithms.

For autonomous vehicles, navigation systems must be accurate enough to provide lane-level localization. Highaccuracy sensors are available but not cost-effective for production use. Although prone to significant error in poor circumstances, even low-cost GPS systems are able to correct Inertial Navigation Systems (INS) to limit the effects of dead reckoning error over short periods between sufficiently accurate GPS updates. Kalman filters (KF) are a standard approach for GPS/INS integration, but require careful tuning in order to achieve quality results. This creates a motivation for a KF which is able to adapt to different sensors and circumstances on its own. Typically for adaptive filters, either the process (Q) or measurement (R) noise covariance matrix is adapted, and the other is fixed to values estimated a priori. We show that by adapting Q based on the state-correction sequence and R based on GPS receiver-reported standard deviation, our filter reduces GPS root-mean-squared error by 23% in comparison to raw GPS, with 15% from only adapting R.

With the rapid development of computer technology and communication technology, pedestrian navigation system(PNS) began to enter the real practical stage. PNS is a method of track reckoning based on strapdown inertial navigation system. However, inertial navigation system is prone to error accumulation with time, resulting in low positioning accuracy and practicability. Low cost inertial measurement unit(IMU) device has low accuracy, and the inertial navigation system has accumulated error, and the system is easy to diverge. Apart from those above, civil GPS accuracy is not stable, and poor GPS signal in a multipath environment may lead to errors, and GPS signals can not be used indoors. It is necessary to design a kind of navigation method to adapt low cost IMU. In this paper, it is presented that a foot inertial navigation system which is based on low cost MEMS inertial sensors is presented. According to the characteristics of pedestrian zero-velocity during walking steady state, an inertial navigation method based on Zero Velocity Update (ZUPT) is adopted. This paper uses air pressure, GPS to assist ZUPT method to correcting navigation parameters through Kalman filter. Based on the implementation scheme of pedestrian navigation system proposed in this paper, the steady state of walking were experimentally verified through the actual test data. The experimental results show that the proposed method can provide efficient, reliable and continuous position and navigation services.

The object of research is the onboard subsystems of Unmanned Aerial Vehicles (UAVs). The research is aimed at analyzing UAVs, specifically the integration and enhancement of satellite-based positioning systems, including Global Navigation Satellite Systems (GNSS) and Inertial Navigation Systems (INS). The problem concerns traditional satellite-based positioning services, especially those relying solely on medium earth orbit (MEO) satellites, which are insufficient for specific requirements. The study aims to address the limitations of these systems on onboard subsystems of UAVs, especially in challenging environments laden with jammers and interference, and to provide a more accurate, robust, and continuous positioning solution. The research proposes a «multilayer system of systems» approach that integrates signals from various sources, including low Earth orbit (LEO) satellites, ground-based positioning, navigation, and timing (PNT) systems, and user-centric sensors. The combined approach, termed LeGNSS/INS, leverages the strengths of each component, providing redundancy and enhanced accuracy. The system's performance was evaluated using pseudo-real output data, demonstrating its ability to generate quasi-real dynamic trajectories for UAV flight. The error analysis showed that the proposed method consistently outperforms traditional GNSS systems, especially in challenging environments. The enhanced performance of the LeGNSS/INS system can be attributed to integrating multiple satellite systems with INS and applying optimal filtering techniques. The research also employed mathematical modeling to represent the dependencies and interactions when combining data from different sources, such as GPS, LEO, and INS. The Kalman filter is a mechanism to fuse data from multiple sources optimally. The insights from this study apply to various sectors, including aviation, maritime navigation, autonomous drones, and defense. The enhanced positioning accuracy can significantly improve safety, navigation precision, and operational efficiency. However, the study assumes idealized conditions for satellite signal reception, which might not always be accurate in real-world scenarios. Challenges, such as the martial law conditions in Ukraine affecting data collection and potential satellite signal restrictions, were also highlighted. Further research can delve into the impact of more complex environmental factors and the integration of additional satellite systems or sensors to enhance accuracy further.

In the last decade, the demand for accurate land-vehicle navigation (LVN) in several applications has grown rapidly. In this context, the idea of integrating multisensor navigation systems was implemented. For LVN, the most efficient multisensor configuration is the system integrating an inertial navigation system (INS) and a global positioning system (GPS), where the GPS is used for providing position and velocity and the INS for providing orientation. The optimal estimation of the system errors is performed through a Kalman filter (KF). Unfortunately, a major problem occurs in all INS/GPS LVN applications that is caused by the frequent GPS signal blockages. In these cases, navigation is provided by the INS until satellite signals are reacquired. During such periods, navigation errors increase rapidly with time due to the time-dependent INS error behavior. For accurate positioning in these cases, some approaches, known as bridging algorithms, should be used to estimate improved navigation information. In...