- Research Article
3
- 10.1016/0045-7906(91)90037-z
A fast computer architecture for the control of robots
- Jan 01, 1991
- Computers and Electrical Engineering
- A Śmiarowski + 1 more +1
A fast computer architecture for the control of robots
Robotic arms are frequently utilized in contemporary industrial production since they offer great qualities like high precision and low mass. How to minimize robotic arm tremors in order to maximize their control effect has emerged as one of the most critical issues to be resolved with the continued development of industrial intelligence. The study uses a combination of PID control and an artificial fish swarm technique to optimize the parameters and confirm the simulation control effect based on the kinematic analysis of a six-degree-of-freedom (Six-DOF) modular robotic arm. The findings demonstrated that the suggested fusion approach converges to zero in 80 iterations and has a recall of 0.893 and 0.785 at an accuracy of 0.8 and 0.9, respectively. The robotic arm control system’s average control effect is 42.96 %, which is a respectable control performance. In the second and third studies, the fusion approach stabilized actuator end tremor suppression after 0.01 s and 0.0001 s, respectively. It shows that the technique can effectively suppress robotic arm bearing tremor and has high flexibility for robotic arm tremor suppression, which offers trustworthy technological support for improving the motion control system of industrial robots.
Loading PDF
A fast computer architecture for the control of robots
A fast computer architecture for the control of robots
Virtual Reality-Based Control and Simulation of a Real Robotic Arm
Industry 4.0 and digital factories leverage key technologies such as virtual reality (VR) to design, simulate, optimize, and interact with physical production systems remotely or collaboratively. Recent advancements in industrial and aerospace applications demonstrate that the integration of VR with versatile robotic control techniques can unlock new opportunities. VR offers an "extended arm" to physical environments by providing a user-friendly human-machine interface, enhancing sustainability, testability, and more in robotic control systems. This research focuses on a widely used and continuously evolving robotic arm, designed to function in an integrated system operating in both real and virtual environments. A 3-degree-of-freedom (3DOF) robotic arm was initially developed and later upgraded to a 5DOF system. The robotic arm integrated with Virtual Reality (VR) interfaces based on the Robot Operating System (ROS) and Unity3D platforms. In the real-world scenario, inverse kinematics applied for the robot's movement mechanism, while gradient descent algorithms used for the virtual model. Forward kinematics using homogeneous transformation matrices employed to verify the accuracy of the robotic arm's movements. VR headsets and controllers used to manage the virtual robotic arm's control. The goal of this study is to develop integrated systems that enable control of real-world operations via remote observation, addressing challenges like prototyping costs and safety risks. By offering an innovative approach to robotic arm control through VR integration, this work contributes to the advancement of Industry 4.0 technologies. The findings suggest potential applications across various industries, opening up new possibilities for remote operation and training in complex manufacturing environments. DOI: 10.61416/ceai.v28i1.9592
Read moreResearch on Adaptive Control System of Robot Arm with Six Degrees of Freedom
This paper aims to exploit the adaptive control robot arm with six degrees of freedom, an adaptive fuzzy control system was established.a fuzzy controller, the robot arm trajectory planning and the D-H algorithm were studied based on the fuzzy controller.Firstly, fuzzy controller and control rules are designed according to a series of characteristics of fuzzy control method.Then, based on the analysis of robot arm parameters, robot arm trajectory plan by the D-H algorithm.Finally, Hardware and software design and experiment were complete.Experimental results show that the D-H algorithm can be used to establish the model of the robot arm, and the MATLAB can be used to understand the data processing.The stability of adaptive control of robot arm with 6 degrees of freedom is good, the expansibility is strong, easy to control and so on.
Read moreRobotic arm control system based on augmented reality brain-computer interface and computer vision
Brain-computer interface (BCI) has great potential to replace lost upper limb function. Thus, there has been great interest in the development of BCI-controlled robotic arm. However, few studies have attempted to use noninvasive electroencephalography (EEG)-based BCI to achieve high-level control of a robotic arm. In this paper, a high-level control architecture combining augmented reality (AR) BCI and computer vision was designed to control a robotic arm for performing a pick and place task. A steady-state visual evoked potential (SSVEP)-based BCI paradigm was adopted to realize the BCI system. Microsoft's HoloLens was used to build an AR environment and served as the visual stimulator for eliciting SSVEPs. The proposed AR-BCI was used to select the objects that need to be operated by the robotic arm. The computer vision was responsible for providing the location, color and shape information of the objects. According to the outputs of the AR-BCI and computer vision, the robotic arm could autonomously pick the object and place it to specific location. Online results of 11 healthy subjects showed that the average classification accuracy of the proposed system was 91.41%. These results verified the feasibility of combing AR, BCI and computer vision to control a robotic arm, and are expected to provide new ideas for innovative robotic arm control approaches.
Read moreFPGA -based vision recognition and robotic arm motion control system
The present study designs and implements a visual recognition and robotic arm control system based on an FPGA (Field-Programmable Gate Array) platform. The system achieves two core functions by operating on a low-cost, single-chip FPGA with limited hardware resources. First, it captures real-time images using a camera. It performs RGB-to-YCbCr color space conversion, morphological filtering, and image segmentation directly on the FPGA to extract the target objects’ color, shape, and position information in real time. Second, it computes the inverse kinematics of the robotic arm by combining the CORDIC algorithm with lookup tables, enabling accurate calculation of joint angles corresponding to target positions and coordinating multi-degree-of-freedom movements. The system has been successfully deployed and tested on an experimental platform, demonstrating its ability to recognize and manipulate multiple target objects, thereby validating its real-time performance and effectiveness in image processing and motion control. Compared with traditional GPU or CPU+FPGA hybrid platforms, the proposed system offers advantages such as faster response speed, lower hardware cost, higher integration, and reconfigurability, making it a promising solution with strong potential for further research and application.
Read moreCamera Holding Robotic Devices in Urology
Camera Holding Robotic Devices in Urology
Sensorization of Robotic Hand Using Optical Three-Axis Tactile Sensor: Evaluation with Grasping and Twisting Motions
Problem statement: Sensitization of robot hand is still remaining as crucial issue since most of robot hand systems nowadays are only capable to grasp a predefined specific object. It is still difficult for robot hand system to realize human-like tactile sensation. Some common problems in robot hand system are low accuracy sensing device, sensors are not robust enough for long time work and heavy duties, inconsistence tactile sensing detection and difficulties in control of sensing fusion with robot trajectory. These problems are apparently drawback the progress to commercializing robot hands as real consumer products. Approach: This study presented the application of optical three-axis tactile sensor to robot hand to improve sensitization quality in robotic hand system. The proposed tactile sensor system was designed with compliance modules to communicate with robot hand control system. The sensing principle used in this tactile sensor comparatively provides better sensing accuracy to detect contact phenomena from acquisition of three axial directions of forces. Methodology of force and slippage detection in the tactile sensor system was presented. Accordingly, the optimization of robot hand control algorithm to comply with the tactile sensor system was presented and verified in experiment of grasping and twisting. Results: The tactile sensor presented in this study is capable of detecting normal and shear force simultaneously. The proposed methodology was verified in experiment with paper cup and water, in which the result shows the robot control system managed to respond to the proposed object stiffness distinction parameters and effectively respond to sudden change of object weight during grasping. An experiment of grasping and twisting motions was conducted using a bottle cap. In order to perform simultaneous grasping and twisting tasks, optimization of the control algorithm was conducted with additional parameters to satisfy the desired tasks. Conclusion: Experimental result shows that the robot hand managed to perform grasping and twisting of bottle cap smoothly. The overall results revealed good performance of the proposed optical three-axis tactile sensor system and robot hand control algorithm for future application in a real artificial robot hand. In addition, slippage sensation measured in a robot control system could contribute a better maneuvering of the robot arm-finger system.
Read morePrecise control of industrial robot arms considering trajectory allowance under torque and speed constraints
Presents a control algorithm for industrial robot arms. This algorithm is based on off-line trajectory generation with compensation of statics and dynamics. Using the proposed method, the Performer MK-3s industrial robot arm was controlled and improved performance has been realized. The proposed algorithm appears as a feedforward, off-line block in the robot arm control system. Therefore, it could be conveniently incorporated with the industrial robot arms without significant hardware alterations.
Read moreAdaptive asynchronous control system of robotic arm based on augmented reality-assisted brain–computer interface
Objective. Brain-controlled robotic arms have shown broad application prospects with the development of robotics, science and information decoding. However, disadvantages, such as poor flexibility restrict its wide application. Approach. In order to alleviate these drawbacks, this study proposed a robotic arm asynchronous control system based on steady-state visual evoked potential (SSVEP) in an augmented reality (AR) environment. In the AR environment, the participants were able to concurrently see the robot arm and visual stimulation interface through the AR device. Therefore, there was no need to switch attention frequently between the visual stimulation interface and the robotic arm. This study proposed a multi-template algorithm based on canonical correlation analysis and task-related component analysis to identify 12 targets. An optimization strategy based on dynamic window was adopted to adjust the duration of visual stimulation adaptively. Main results. Experimental results of this study found that the high-frequency SSVEP-based brain–computer interface (BCI) realized the switch of the system state, which controlled the robotic arm asynchronously. The average accuracy of the offline experiment was 94.97, whereas the average information translate rate was 67.37 ± 14.27 bits·min−1. The online results from ten healthy subjects showed that the average selection time of a single online command was 2.04 s, which effectively reduced the visual fatigue of the subjects. Each subject could quickly complete the puzzle task. Significance. The experimental results demonstrated the feasibility and potential of this human-computer interaction strategy and provided new ideas for BCI-controlled robots.
Read moreReal-Time BCI-Controlled Humanoid Robotic Arm Using SSVEP and SVM Classification with Augmented Reality in ROS
This research aims to develop a new method of real-time robotic arm control system using brain computer interface with Steady State Visual Evoked Potential (SSVEP) paradigm. The process of reading brain signals visually involves displayed flashing stimulus animation with certain frequencies in a modified Augmented Reality goggle. The procedure operates to trigger optical brain signals in the Occipital section with signal quality enhancement and new displayed SSVEP protocol in AR Head-Mounted Display (AR HMD. This study uses light Support Vector Machine (SVM) as the SSVEP-BCI signals classifier of four SSVEP Stimulus. The online demonstration results were capable of real-time control of the robotic arm in a ROS environment by achieving four distinct movements with a classification accuracy of 87%.
Read moreControl of a 9-DoF Wheelchair-mounted robotic arm system using a P300 Brain Computer Interface: Initial experiments
A wheelchair-mounted robotic arm (WMRA) system was designed and built to meet the needs of mobilityimpaired persons with limitations of upper extremities, and to exceed the capabilities of current devices of this type. The control of this 9-degree-of-freedom system expands upon conventional control methods and combines the 7-DoF robotic arm control with the 2-degree-of-freedom power wheelchair control. The 3- degrees of redundancy are optimized to effectively perform activities of daily living and overcome singularities, joint limits and some workspace limitations. The control system is designed for teleoperated or autonomous coordinated Cartesian control, which offers expandability for future research. A P300 Brain Computer Interface (BCI), the BCI2000, was implemented to control the WMRA system. The control is done by recording and analysing the brain activity through an electrode cap while providing visual stimulation to the user via a visual matrix. The visual matrix contains a symbolic or an alphabetic array corresponding to the motion of the WMRA. By recognizing online and in real-time, which element in the matrix elicited a P300, the BCI system can identify which element the user chose to communicate. The chosen element is then communicated to the controller of the WMRA system. The speed and accuracy of the BCI system was tested. This paper gives details of the WMRA's integration with the BCI2000 and documents the experimental results of the BCI and the WMRA in simulation.
Read moreIntuitive Control of a Robotic Arm via Inertial Sensors and EMG for Assistive Applications
We present an intuitive, real-time control system for a 6-axis robotic arm, designed to support assistive applications in biomedical contexts. Using four MARG-based inertial sensors placed on the arm and hand, human motion is captured and mapped to robot kinematics via quaternion-based sensor fusion and a two-step calibration process. The resulting end-effector pose is scaled to match the robot’s workspace, while EMG signals enable control of a robotic gripper through thumb-index gripping gestures. The system enables direct, gesture-based control without extensive training, making it accessible for users with limited mobility but preserved upper limb function. Evaluation results confirm stable, low-latency operation during pick-and-place tasks, with users intuitively compensating for minor sensor inaccuracies through visual feedback. This approach demonstrates strong potential for assistive robotics in home or care environments, particularly where conventional control methods are unsuitable.
Read moreMonocular vision-based visual control for SCARA-type robotic arms: a depth mapping approach
<p>The accelerated growth of an increasingly automated industry requires the use of autonomous robotic systems. However, the use of these systems commonly requires an enormous amount of sensors. In this paper we evaluate the performance of a new system for visual control of a selective compliance assembly robot arm (SCARA) robotic arm using a monocular depth map that only requires one monocular camera. This system aims to be an efficient alternative to reduce the number of sensors in the robotic arm area while maintaining the effectiveness of traditional vision algorithms that use stereoscopic architectures of cameras. For this purpose, this system is compared with representative state-of the-art vision algorithms focused on the control of robotic arms. The results are statistically analyzed, indicating that the algorithm proposed in this research has competitive performance compared to state-of-the-art robotic arm visual control algorithms only using a single monocular camera.</p>
Read moreArticulated Robot Arm for Garbage Disposal in Hospital Environment
The use of robotic arms is crucial in the medical industry, particularly in hospital settings. It can be used for a wide range of things, including as an aide in the operating room or for the removal of medical waste, among many other things. In this work, the robotic arm is designed to segregate medical waste as hazardous or non-hazardous. A dataset with five classes was created because there was no readily available data set for medical waste. The primary challenge in doing so is to programme the robotic arm’s movements and train the image dataset to classify objects as hazardous or non-hazardous. The 3D-printed robotic arm model has 6-Degree of Freedom(DOF) and is coupled with MG996R and SG90 servo motors. The robotic arm that is attached to an Arduino uno board is operated by the Blynk IoT platform. It uses YOLO V5 (You Only Look Once) algorithm to detect objects, and it favours intersection over union (IOU). To demonstrate, static robotic arm model was placed near the pile of medical waste to identify the waste and segregate it accordingly.
Read more2P2-G06 マルチエージェントシステム構築用ツールキットを用いた分散制御手法シミュレータの開発(進化・学習とロボティクス)
This study deals with development of simulator for the distributed robot control system. In the distributed robot control system, active parts of a robot arm such as motors and links are modeled as software components which make performance according to states of other components based on exchanging messages. This paper reports the development of the simulator for evaluating the distributed robot control system and estimating possibilities for actual robot arm control system, and case studies of redundant robot arm applications.
Read more