Sliding-Mode Control to Compensate PVT Variations in dual core systems

Dynamic voltage and frequency scaling (DVFS) is heavily used for power management in real-time environments. Although the schemes leveraging DVFS provide significant power reduction, adverse effects on chip reliability are possible. Alternate increase and decrease in operating voltage and frequency leads to thermal cycling. Increasing transistor packing density leads to a larger range of possible operating temperatures, exacerbating the thermal cycling problem. Also, the chip reliability quantification process does not include and represent the effects of small scale thermal cycles. A good number of in-field chip failures are attributed to the consequences of these. Thus, it is imperative to include their effects into the processor voltage and frequency selection process. Our work develops an integrated processor thermal and performance management technique centered on novel polynomial time scheduling algorithms that lead to lowering of thermal cycles in soft real time environments. Our technique leverages application awareness and runtime monitoring for improving chip lifetime, while achieving considerable energy savings. We show that a significant reduction in thermal cycles and peaks is possible, leading to longer chip life expectations.

Graphics processor (GPU) architectures have evolved rapidly in recent years with increasing performance demanded by 3D graphics applications such as games. However, challenges exist in integrating complex GPUs into mobile devices because of power and energy constraints, motivating the need for energy efficiency in GPUs. While a significant amount of power optimisation research effort has concentrated on the CPU system, GPU power efficiency is a relatively new and important area because the power consumed by GPUs is similar in magnitude to CPU power. Power and energy efficiency can be introduced into GPUs at many different levels: 1) Hardware component level - queue structures, caches, filter arithmetic units, interconnection networks, processor cores, etc., can be optimised for power. 2) Algorithm level - the deep and complex graphics processing computation pipeline can be modified to be energy aware. Shader programs written by the user can be transformed to be energy aware. 3) System level - co-ordination at the level of task allocation, voltage and frequency scaling, etc., requires knowledge and control of several different GPU system components We outline two strategies for applying energy optimisations at different levels of granularity in a GPU: (1) Texture Filter Memory (TFM) - an energy-efficient addition to the texture memory hierarchy component; and (2) an overall system level Dynamic Voltage and Frequency Scaling (DVFS) based energy reduction strategy based on an accurate tile-level slack prediction. Texture Filter Memory is an augmentation of the standard GPU texture cache hierarchy. Instead of a regular data cache hierarchy, we employ a small first level register based structure that is optimised for the relatively predictable memory access stream in the texture filtering computation. Predictability of the memory access patterns leads us to reduce power by using a simpler register access structure. Power is saved by avoiding the expensive tag lookup and comparisons present in regular caches. Further, the texture filter memory is a very small structure, whose access energy is much smaller than a data cache of similar performance. Dynamic Voltage and Frequency Scaling, an established energy management technique, can be applied in GPUs by first predicting the workload in a given frame, and, where sufficient slack exists, lowering the voltage and frequency levels so as to save energy while still completing the work within the frame rendering deadline. We apply DVFS in a tiled graphics renderer, where the workload prediction and voltage/frequency adjustment is performed at a tile-level of granularity, which creates opportunities for on-the-fly correction of prediction inaccuracies, ensuring high frame rates while still delivering low power. Tile-level energy management schemes are distinctly superior to schemes that work at the granularity of the entire frame in terms of energy saving and quality of the rendering measured in terms of frames rendered per second. The prediction mechanism relies both on the history - workload observed for the tile in recent frames, as well as rank - a quantification of the tile workload based on the frame structure, consisting of geometry, pixel shading, texture, and raster operations workloads.

Dynamic Voltage and Frequency Scaling (DVFS) approach is proposed to control the power consumption in devices of different types like from a small mobile device to a huge server. This paper aims to study the effect of parallel execution of two benchmark applications, one the Stanford Single Source benchmarks (lightweight parallel code) and, Stanford Parallel Applications for Shared Memory (SPLASH-2) programs (heavy real-time data streaming parallel applications that run on multi -core clusters) on DVFS for dark silicon ameliorating. Both these benchmarks executed on a gem5 Full System simulator, booting a linaro based linux kernel. To get a holistic big picture of the power and thermal properties of systems that run on DVFS, in addition to the control feature present in gem 5, a power-estimation framework used for the evaluation of the efficiency of various DVFS policies, the MCPAT and Hotspot is also employed. Based on the execution of Stanford workloads DVFS model is analyzed in terms of memory footprint and on other critical processor performance metrics, like running time per core, bus latency, number of read, writes, access time, cache hit or miss. The gem5 is extended with full DVFS support by the addition of a framework in which easy power-model integration can be done.

Dynamic Voltage and Frequency Scaling (DVFS) is widely used in today's mobile devices. Commonly adopted OS level DVFS policies usually operate with high sampling and adjustment frequency in order to compensate for the lack of information from applications. In this paper, we consider the application of video decoding and propose a method that enables DVFS at a coarse time granularity by taking advantage of application level semantics. Using machine learning, we build a prediction model for the choice of CPU frequency based on the estimated workload and the progress of execution. We show that with our method, the system is able to perform DVFS with a frequency of only around 1 Hz, abiding by the practical constraints imposed by existing operating systems, but still saves an average of 40.1% in energy consumption compared with the execution at nominal speed. Further, we argue that the law of diminishing returns applies if we increase the frequency at which DVFS operates, and thus it may be costly and impractical to perform application level DVFS at a very fine time granularity.

Energy efficiency and energy proportional computing have become major constraints in the design of modern exascale platforms. Dynamic voltage and frequency scaling (DVFS) is one of the most commonly used and effective techniques to dynamically reduce power consumption based on workload characteristics. Many energy-saving strategies, however, employ DVFS without considering its applicability level in a given multicore processor. The present work demonstrates that disregarding the DVFS granularity as a design constraint while developing energy-saving strategies may reduce the efficacy of the strategy for certain application classes. Specifically, DVFS applicability levels (called granularities) are determined here for three different Intel processor microarchitectures. Then, the degradation in energy savings is evaluated if the DVFS granularity is disregarded. Experiments were conducted on the widely used quantum chemistry packages, General Atomic and Molecular Electronic Structure System (GAMESS) and NWChem, and show that, for granularity unaware energy-saving techniques, the overall energy consumption may increase by as much as 19%.

Multi-core processors have become an integral part of mainstream high performance computer systems. In parallel, exponentially increasing power density and packaging costs have necessitated system level thermal management solutions for multi-core systems. Dynamic thermal management (DTM) techniques monitor on-chip temperature continuously and typically employs dynamic voltage and frequency scaling (DVFS) to lower the temperature when it exceeds a pre-defined threshold. State-of-the-art DTM solutions for multi-core systems include distributed DVFS (where each core can scale the voltage/frequency individually) and global DVFS (where all cores scale voltage/frequency simultaneously). Distributed DVFS generally offers higher performance than global DVFS, but it is hard to implement and has major scalability issues.

Dynamic voltage and frequency scaling (DVFS) is a means to adjust the computing capacity and power consumption of computing systems to the application demands. DVFS is generally useful to provide a compromise between computing demands and power consumption, especially in the areas of resource-constrained computing systems. Many modern processors support some form of DVFS. In this article, we focus on the development of an execution framework that provides lightweight DVFS support for reactive stream processing systems (RSPS). RSPs are a common form of embedded control systems, operating in direct response to inputs from their environment. At the execution framework, we focus on support for many-core scheduling for parallel execution of concurrent programs. We provide a DVFS strategy for RSPs that is simple and lightweight, to be used for dynamic adaptation of the power consumption at runtime. The simplicity of the DVFS strategy became possible by the sole focus on the application domain of RSPs. The presented DVFS strategy does not require specific assumptions about the message arrival rate or the underlying scheduling method. While DVFS is a very active field, in contrast to most existing research, our approach works also for platforms like many-core processors, where the power settings typically cannot be controlled individually for each computational unit. We also support dynamic scheduling with variable workload. While many research results are provided with simulators, in our approach, we present a parallel execution framework with experiments conducted on real hardware, using the single-chip cloud computer many-core processor. The results of our experimental evaluation confirm that our simple DVFS strategy provides potential for significant energy saving on RSPs.

Many power management strategies have been proposed for enterprise servers based on dynamic voltage and frequency scaling (DVFS), but those solutions cannot further reduce the energy consumption of a server when the server processor is already at the lowest DVFS level and the server utilization is still low (e.g., 5% or lower). To achieve improved energy efficiency, request batching can be conducted to group received requests into batches and put the processor into sleep between the batches. However, it is challenging to perform request batching on a virtualized server because different virtual machines on the same server may have different workload intensities. Hence, putting the shared processor into sleep may severely impact the performance of all the virtual machines. This paper proposes Virtual Batching, a novel request batching solution for virtualized servers with primarily light workloads. Our solution dynamically allocates CPU resources such that all the virtual machines can have approximately the same performance level relative to their allowed peak values. Based on this uniform level, our solution determines the time length for periodically batching incoming requests and putting the processor into sleep. When the workload intensity changes from light to moderate, request batching is automatically switched to DVFS to increase processor frequency for performance guarantees. Empirical results based on a hardware testbed and real trace files show that Virtual Batching can achieve the desired performance with more energy conservation than several well-designed baselines, e.g., 63% more, on average, than a solution based on DVFS only.

Shrinking feature sizes, reduced voltages, and higher transistor count of nano-scale silicon chips challenge designers in terms of performance, power consumption, and reliability. This paper investigates the effect of simultaneous use of dynamic voltage and frequency scaling (DVFS) and body biasing (BB) on power consumption, reliability, and performance. An analytical model of reliability as a function of body bias voltage, supply voltage, and frequency is proposed. We derive a three dimensional optimization problem by exploiting proposed reliability model in conjunction with power consumption and performance model. The resulting problem is solved using widely-used geometric optimization to identify optimal supply voltage and body bias voltage and then is validated using accurate simulation. Afterwards, it is demonstrated how joint energy-performance-reliability space optimization method can be used in an adaptive reliability-aware power management systems. Finally, we show that combined soft error aware BB and DVFS is capable of improving power consumption about 30% in comparison to reliability-aware DVFS only for the same level of reliability and performance constraints.

Nowadays, virtualization is present in almost all computing infrastructures. Thanks to VM migration and server consolidation, virtualization helps reducing power consumption in distributed environments. On another side, Dynamic Voltage and Frequency Scaling (DVFS) allows servers to dynamically modify the processor frequency (according to the CPU load) in order to achieve less energy consumption. We observed that these two techniques have several incompatibilities. For instance, if two virtual machines VM1 and VM2 are running on the same physical host (with their respective allocated credits), VM1 being overloaded and VM2 being underloaded, the host may be globally underloaded leading to a reduction of the processor frequency, which would penalize VM1 even if VM1’s owner booked a given CPU capacity. In this paper, we analyze the compatibility of available VM schedulers with DVFS management in virtualized environments, we identify key issues and finally propose a DVFS aware VM scheduler which addresses these issues. We implemented and evaluated our prototype in the Xen virtualized environment.

In designing information communication devices such as real-time embedded systems, it is quite important to maximize the system performance under some hard energy constraints. As a useful technology to reduce the energy consumption in computer-based systems, the dynamic voltage and frequency scaling (DVFS) is becoming very popular. In this paper, we consider an optimal DVFS allocation problem by maximizing the system reliability subject to the hard real-time and energy constraints. More specifically, we formulate a reliability maximization problem when the task processing is probabilistic and is described by a discrete-time Markov chain. Two approximate formulas are proposed to calculate the system reliability efficiently. We perform the sensitivity analysis of model parameters in numerical examples, and also give a case study to design a Wi-Fi subsystem in terms of the DVFS allocation.

NoC (Network-on-Chip) in recent times has been broadly used in majority of present multi-core (MC) processing environment (i.e., processor) (especially in cloud computing servers). Then, SoCs (System-on-Chips), as a scalable and flexible strategy to the widespread integration of higher number of element in the chips. Nonetheless, a main issue is reliable processing, performance efficiency and energy efficacy perquisite of BigData processing framework. This work assume self-aware MC architectures that autonomously adjust or optimize their performance to accommodate users quality of service (QoS) performance requirement, job execution performance, energy efficiency, and resource accessibility. Numerous researchers are concerned about the lack of energy conservation in cloud computing environment and hence numerous power efficient technologies are introduced by different researchers to protect environment by enormous amount of power dissipation and enhance the performance of the environment. However, these power efficient technologies requires enormous amount of interaction cost between inter-processors. Moreover, these technologies provides insufficient results and energy consumption of cloud computing devices cannot be reduced largely due to enormous amount of memory utilization, routing etc. For overcoming research challenges, this work present a novel performance and energy balanced scheduling (PEBS) approach in cloud environment based on Dynamic voltage and Frequency Scaling (DVFS) technique is proposed. Experiment outcome shows PEBS_DVFS model attains good trade-off between system performance and energy consumption in multicore cloud computing (CC) architectures when compared with existing model.

Dynamic Voltage and Frequency Scaling (DVFS) is one of the most commonly used power reduction techniques in high-performance processors. DVFS varies the frequency and voltage of a microprocessor in real-time according to processing needs. Although there are different versions of DVFS, at its core DVFS adapts power consumption and performance to the current workload of the CPU. Specifically, existing DVFS techniques in high-performance processors select an operating point (CPU frequency and voltage) based on the utilization of the processor. This approach integrates OS-level control, but such control is pessimistic. Existing DVFS techniques are pessimistic about the user. Indeed, they ignore the user, assuming that CPU utilization or the OS events prompting it are sufficient proxies. A high CPU utilization simply leads to a high frequency and high voltage, regardless of the user’s satisfaction or expectation of performance. Existing DVFS techniques are pessimistic about the CPU. They assume worst-case manufacturing process variation and operating temperature by basing their policies on loose worstcase bounds given by the processor manufacturer. A voltage level for a given frequency is set such that even the worst shipped processor of a given generation will be stable at the highest specified temperature. In response to these observations, we have developed, implemented, and evaluated the following two new power management techniques that can be readily employed independently or together. We elaborate on these techniques in detail elsewhere [4].

Dynamic Voltage and Frequency Scaling (DVFS) is an essential part of controlling the power consumption of any computer system, ranging from mobile phones to servers. DVFS efficiency relies on hardware-software co-optimization, thus using existing hardware cannot reveal the full optimization potential beyond the current implementation's characteristics. To explore the vast design space for DVFS efficiency, that straddles software and hardware, a simulation infrastructure must provide features that are not readily available today, for example: software controllable clock and voltage domains, support for the OS and the frequency scaling module of it, and an online power estimation methodology. As the main contribution, this work enables DVFS studies in a full-system simulator. We extend the gem5 simulator to support full-system DVFS modeling. By doing so, we enable energy-efficiency experiments to be performed in gem5 and we showcase such studies. Finally, we show that both existing and novel frequency governors for Linux and Android can be effortlessly integrated in the framework, and we evaluate the efficiency of different DVFS schemes.

For energy efficient scheduling of task graphs on multiprocessors, dynamic voltage and frequency scaling (DVFS) and duplication are two widely used techniques. DVFS is generally used to utilize the execution slack by lowering the voltage and frequency of a task to decrease the dynamic energy consumption. Whereas duplication decreases the schedule length and communication energy consumption by replicating certain dependent tasks to avoid communication delays. However, while making decisions on DVFS and duplication for a task, the static energy consumption is mostly overlooked. With chip technologies reducing to a few nano meters, static energy consumption due to leakage current has become important. This article proposes a novel polynomial time heuristic that uses both DVFS and duplication to optimize static energy consumption along with dynamic and communication energy when scheduling task graphs on heterogeneous multiprocessors. The proposed list scheduling algorithm also balances schedule length with energy consumption using proposed normalized difference parameters while making scheduling decisions for a particular task. The results demonstrate the ability of the proposed algorithm to decrease the overall energy consumption with an improved or comparable schedule length as compared with other algorithms in various scenarios.