Sliding Mode Control with Nonlinear Disturbance Observer based on Genetic Algorithm for Inverted Pendulum with Mismatched Disturbances

An intelligence sliding mode controller for rotary steering drilling stabilized platform based on nonlinear disturbance observer is presented. Nonlinear disturbance observer which can converge exponentially with suitable design parameters is used to obs erve the uncertain disturbance of stabilized platform under work condition. Sliding mode controller is designed to guarantee the robustness of the closed-loop system. The adaptive rate of switching gain is designed and sign function is replaced by bipolar sigmoid function to weaken chattering. Finally, genetic algorithm is applied to search the optimal controller parameters, including switching function coefficient, switching gain adaptive coefficient, sigmoid function coefficient and observer coefficient. Simulation results show that nonlinear disturbance observer can observe the uncertain disturbance effectively, controller output is decreased and stabilized platform can get optimal control performance and robustness.

A model-free fractional-order sliding mode control (MFFOSMC) method based on a non-linear disturbance observer is proposed for the electric drive system in this paper. Firstly, the ultra-local model is established by using the mathematical model of electric drive system under parameter perturbation. Then, aiming at reducing the chattering of the sliding mode controller and improving the transient response, a model-free fractional-order sliding mode controller is designed based on fractional-order theory. Next, considering that the traditional sliding mode control can only suppress matched disturbance and that it is sensitive to mismatched disturbance, a non-linear disturbance observer is used to estimate disturbance, and the estimated variables are used in the design of a sliding mode surface to improve the tracking accuracy of the system. Finally, the experiment is completed on an asynchronous motor drive platform. Compared with the model-free integer-order sliding mode control (MFIOSMC), the results show that the proposed method has good dynamic response and strong robustness. Meanwhile, the proposed method reduces the dependence on mathematical models.

The work presented here is concerned with the robust control problem for the inverted pendulum with mismatched disturbances via a non-linear disturbance observer (NDO)-based sliding mode control (SMC) method. The NDO-based SMC method provides a solution to the main limitation of conventional first-order sliding mode controllers that is the presence of high frequency oscillations in the control input known as chattering while retaining the nominal performance. To show the effectiveness of NDO-based SMC, both the conventional SMC and the integral SMC (I-SMC) methods are employed in the simulation studies for the purpose of comparison studies and results demonstrate the merits of NDO-based SMC.

The depth tracking issue of underactuated autonomous underwater vehicle (AUV) in vertical plane is addressed in this paper. Considering the complicated dynamics and kinematics model for underactuated AUV, a more simplified model is obtained based on assumptions. Then a nonlinear disturbance observer (NDO) is presented to estimate the external disturbance acting on AUV, and an adaptive terminal sliding mode control (ATSMC) based on NDO is applied to enhance the depth tracking performance of underactuated AUV considering both internal and external disturbance. Compared with the traditional sliding mode controller, the static error and chattering problem of the depth tracking process have been clearly improved by adopting NDO-based ATSMC. The stability of control system is proven to be guaranteed according to Lyapunov theory. In the end, simulation results imply that the proposed controller owns strong robustness and satisfied control effectiveness in comparison with the traditional controller.

The angular velocity of the input link of a mechanism fluctuates due to the inertia of links and the external forces, although it is generally assumed constant in design. The control of the crank angular velocity of a four-bar mechanism driven by a DC motor by moving sliding mode control is considered in this study. A time-varying slope is proposed based on the error state. The mathematical model of the motor-mechanism system is derived using Eksergian’s equation of motion. First, the state space equations are solved numerically for constant motor voltage to show the velocity fluctuations of the crank. Then both the conventional sliding mode control method and the proposed moving sliding mode control method are applied to obviate this unwanted velocity fluctuation. The method is verified by numerical simulations as well as experimental studies. The results of both the sliding mode control and the moving sliding mode control methods are compared. It is shown that a moving sliding surface in the sliding mode control increases the robustness of conventional sliding mode control by decreasing the reaching time. Also, the performance of the moving sliding mode control against parametric variations and external disturbances is experimentally investigated by adding a mass and applying an unexpected force on one of the links of the mechanism.

The direct yaw-moment control system can significantly enhance vehicle stability in critical situations. In this paper, the direct yaw-moment control strategies are proposed for in-wheel electric vehicles by using sliding mode (SM) and nonlinear disturbance observer (NDOB) techniques. The ideal sideslip angle at the center of gravity and the yaw rate are first calculated based on a linear two degree of freedom vehicle model. Then, the actual sideslip angle is identified and estimated by constructing a state observer. On this basis, a traditional discontinuous SM direct yaw-moment controller is designed to guarantee that the sideslip angle and the yaw rate will approach the ideal ones as closely as possible. To tackle the chattering problem existing in the traditional SM controller, a second-order sliding mode (SOSM) controller is further designed by taking the derivative of the controller as the new control, which implies that the actual control can be an integration of the SOSM controller. Finally, to avoid the large gains in the derived controllers, by combining the NDOB with the derived controllers, the composite control schemes are also proposed. In comparison with the discontinuous first-order SM controller, the proposed SOSM controller is shown to be more effective.

This paper proposes an online gain tuning algorithm for a robust sliding mode speed controller of surface-mounted permanent magnet synchronous motor (SPMSM) drives. The proposed controller is constructed by a fuzzy neural network control (FNNC) term and a sliding mode control (SMC) term. Based on a fuzzy neural network, the first term is designed to approximate the nonlinear factors while the second term is used to stabilize the system dynamics by employing an online tuning rule. Therefore, unlike conventional speed controllers, the proposed control scheme does not require any knowledge of the system parameters. As a result, it is very robust to system parameter variations. The stability evaluation of the proposed control system is fully described based on the Lyapunov theory and related lemmas. For comparison purposes, a conventional sliding mode control (SMC) scheme is also tested under the same conditions as the proposed control method. It can be seen from the experimental results that the proposed SMC scheme exhibits better control performance (i.e., faster and more robust dynamic behavior, and a smaller steady-state error) than the conventional SMC method.

Based on a nonlinear disturbance observer, a backstepping sliding mode robust control is proposed for a wire-driven parallel robot (WDPR) system used in the wind tunnel test to dominate the motion of the end effector. The control method combines both the merits of backstepping control and sliding mode robust control. The WDPR is subject to different types of disturbances, and these disturbances will affect the motion precision of the end effector. To overcome these problems, a nonlinear disturbance observer (NDO) is designed to reject such disturbances. In this study, the design method of the nonlinear disturbance observer does not require the reliable dynamic model of the WDPR. Moreover, the design method can be used not only in the WDPR but also in other parallel robots. Then, a backstepping design method is adopted and a sliding mode term is introduced to construct a desired controller, and the disturbances are compensated in the controller to reduce the switching gain and guarantee the robustness. For the sake of verifying the stabilization of the closed-loop system, the Lyapunov function is constructed to analyze the stabilization of the system. Finally, the feasibility and validity of the proposed control scheme are proved through both simulation and experimental results.

PurposeThe purpose of this paper is to achieve high-precision sliding mode control without chattering; the control parameters are easy to adjust, and the entire controller is easy to use in engineering practice.Design/methodology/approachUsing double sliding mode surfaces, the gain of the control signal can be adjusted adaptively according to the error signal. A kind of sliding mode controller without chattering is designed and applied to the control of ultrasonic motors.FindingsThe results show that for a position signal with a tracking amplitude of 35 mm, the traditional sliding mode control method has a maximum tracking error of 0.3326 mm under the premise of small chattering; the boundary layer sliding mode control method has a maximum tracking error of 0.3927 mm without chattering, and the maximum tracking error of continuous switching adaptive sliding mode control is 0.1589 mm, and there is no chattering. Under the same control parameters, after adding a load of 0.5 kg, the maximum tracking errors of the traditional sliding mode control method, the boundary layer sliding mode control method and the continuous switching adaptive sliding mode control are 0.4292 mm, 0.5111 mm and 0.1848 mm, respectively.Originality/valueThe proposed method not only switches continuously, but also the amplitude of the switching signal is adaptive, while maintaining the robustness of the conventional sliding mode control method, which has strong engineering application value.

This article seeks to achieve high tracking performance of the hybrid automobile electro-coating conveying mechanism with disturbances and uncertainties. An integral sliding mode control scheme is first presented to eliminate the reaching phase in sliding mode control. Then, an adaptive integral sliding mode controller is designed without knowing the disturbance information. Finally, a composite strategy, referred to as nonlinear disturbance observer (NDO)-based adaptive integral sliding model control, is put forward to further reduce the switching gain. By compensating the lumped disturbances via a NDO, the switching gain is only required to be higher than upper bound of the disturbance estimation error which is much smaller than actual disturbance. The results of both numerical simulations and experiments show that the proposed approach has good control performance especially in reducing the switching gain and alleviating the chattering problem.

This paper presents a novel adaptive sliding mode control based on nonlinear sliding surface with disturbance observer (ANSMC-DOB) for precision trajectory tracking control of a surface mount technology (SMT) assembly machine. A two-degree-of-freedom model with time-varying parameter uncertainties and disturbances is built to describe the first axial mode of the pick-place actuation axis of the machine. According to the principle of variable damping ratio coefficient which makes the system have a nonovershoot transient response and a short settling time in the second-order system, the nonlinear sliding surface is designed for the sliding mode control (SMC). Since the upper bound value of the disturbances is unknown, the adaptive gain estimation is applied to replace the switching gain in the SMC. In order to settle the problem of SMC unrobust to the mismatched parameter uncertainties and disturbances, the nonlinear disturbance observer is introduced to estimate the mismatched disturbances and form the novel controller of ANSMC-DOB. The stability of sliding surfaces and control laws are verified by the Lyapunov functions. The simulation research and comparative experiments are conducted to verify the improvement of positioning accuracy and robustness by the proposed ANSMC-DOB in the SMT assembly machine.

Improved sliding-mode control for a class of disturbed systems based on a disturbance observer

This article presents an original motion control strategy for robot manipulators based on the coupling of the inverse dynamics method with the so-called second-order sliding mode control approach. Using this method, in principle, all the coupling non-linearities in the dynamical model of the manipulator are compensated, transforming the multi-input non-linear system into a linear and decoupled one. Actually, since the inverse dynamics relies on an identified model, some residual uncertain terms remain and perturb the linear and decoupled system. This motivates the use of a robust control design approach to complete the control scheme. In this article the sliding mode control methodology is adopted. Sliding mode control has many appreciable features, such as design simplicity and robustness versus a wide class of uncertainties and disturbances. Yet conventional sliding mode control seems inappropriate to be applied in robotics since it can generate the so-called chattering effect, which can be destructive for the controlled robot. In this article, this problem is suitably circumvented by designing a second-order sliding mode controller capable of generating a continuous control law making the proposed sliding mode controller actually applicable to industrial robots. To build the inverse dynamics part of the proposed controller, a suitable dynamical model of the system has been formulated, and its parameters have been accurately identified relying on a practical MIMO identification procedure recently devised. The proposed inverse dynamics-based second-order sliding mode controller has been experimentally tested on a COMAU SMART3-S2 industrial manipulator, demonstrating the tracking properties and the good performances of the controlled system.

A sliding mode control algorithm based on nonlinear disturbance observer (NDO) is proposed for integrated guidance and control (IGC) system in this paper. Firstly, the IGC model is established as a linear system with mismatched uncertainties. Secondly, a NDO with finite time convergence is used to estimate the disturbances and their derivatives. Thirdly, an integral sliding mode surface is designed to obtain the rudder deflection command directly instead of the back-stepping control (BC) algorithm used in conventional IGC system, which achieves the real sense of IGC, and the stability of the system is proved strictly by Lyapunov stability theory. Finally, the superiority of the IGC method based on NDO is verified by simulation.

This article is motivated by the control issues of the translational oscillator with rotational actuator system in the existence of uncertain disturbances. A nonlinear disturbance observer and a global sliding mode control method are proposed for the disturbance estimation and stabilization of the translational oscillator with rotational actuator system. Compared with the existing control methods, uncertain disturbances are estimated by the proposed nonlinear disturbance observer. In addition, the sliding mode control method is continuous and global robustness with respect to disturbances. Specifically, to facilitate the controller design, the dynamics of the translational oscillator with rotational actuator system are rearranged as the cascade form first. Then, a virtual signal is constructed and corresponding error dynamics are derived. Subsequently, a nonlinear disturbance observer and a continuous global sliding mode control method are proposed for the disturbance rejection and stabilization of the translational oscillator with rotational actuator system. Finally, simulation results are provided to verify the effectiveness and robustness of the proposed controller.