Smart House Planner: An AI-Powered System for Interactive Home Design, 3D Modelling, and Cost Estimation

In these days, 3D models are introduced as new digital contents such as video games and data material for 3D printer. The demand of 3D modeling for ordinary people has been increased. While using existed hand-held 3D modeling system, users have to estimate unmeasured area through a display. Also users have to terminate consequently modeling with watching a process of modeling [Fudono et al. 2005]. In this paper, we propose a novel modeling system which indicates route guidance by means of area limitation of modeling at the beginning. Owing to area limitation of modeling, users can obtain desired 3D model with watching effective route guide for measuring and automatic termination of modeling. Users can obtain desired 3D model easily and quickly

In this paper we present a method for sharing interactive and dynamic 3D models that are collaboration-unaware, i.e., models that have not been designed to be used by multiple users at the same time. This functionality is an essential requirement for the inclusion of arbitrary 3D models, as generated by standard CAD or animation software, into teleconferencing sessions. A key aim of this work is to show that a large part of the required functionality can be developed in a way so that it is reusable for other applications such as shared whiteboards or networked computer games. Our method therefore consists of both an application dependent part that handles the specific tasks required for sharing 3D models, and of a number of generic services such as synchronization, scalable support for latecomers, and the ability to record and replay sessions. The generic services are based on an abstract media model and the RTP/I application level protocol for distributed interactive media. Any other application for a medium that shares this model and that uses RTP/I may reuse these generic services. We have implemented a prototype called TeCo3D demonstrating the feasibility of our approach.

Interactive 3D modeling in VR is both aided by immersive 3D input and hampered by model disjunct, tool-based or selection-action user interfaces. We propose a direct, signifier-based approach to the popular interactive technique of creating 3D models through a sequence of extrusion operations. Motivated by handles and signifiers that communicate the affordances of everyday objects, we define a set of design principles for an immersive, signifier-based modeling interface. We then present an interactive 3D modeling system where all modeling affordances are modelessly reachable and signified on the model itself.

The development of 3D technology allows the digitisation of cultural heritage objects. Despite the fact that 3D scanning technology is not fully developed, it offers great opportunities for recording spatial data. Three-dimensional digital recording can be made for museum exhibits as well as for historic architectural objects. The method used is a non-invasive (non-contact) method, which is a significant advantage when working with historic buildings. The use of 3D scanners makes it possible to reduce the risk of damage to the monument. The application of a safe method of 3D scanning facilitates digital archiving of objects, which gives many possibilities of their use. One of them is digital dissemination of three-dimensional models and even making replicas using 3D printing technology. These types of models make it possible to reach a wide audience. First of all, they provide access to monuments for people with special needs, who currently constitute over a dozen percent of the population. In particular, they are the elderly, sick or people with various types of disabilities, e.g. motionally or visually impaired people. Literature analysis as well as conversations with dysfunctional people show that 3D digitisation of cultural heritage objects is needed and expected. The article presents an example of the use of modern 3D technologies for the dissemination of cultural heritage on the example of objects from the area of the Silk Road. A two-track process of making small museum artefacts available is presented. The first track concerns making objects available in the form of interactive digital 3D models placed on websites. The second one uses real models printed in 3D technology, which can be made available to visually impaired people. The work discusses the course of joint activities to prepare these 3D models and specialised activities that are necessary to make both versions of 3D models for presentation on the web and for kinaesthetic cognition, i.e. by touch. The authors’ actions resulted in the preparation of 3D models of historic vessels from the turn of the 11th/12th centuries from the ancient city of Afrasiyab – a suburb of modern Samarkand in Uzbekistan.

Insects are the most diverse group of living organisms on Earth, but their small size and structural complexity make species identification a challenging task, especially for those with less experience in entomology. Accurate identification is essential for pest management decisions in agriculture. Traditional 2D resources, such as field guides and taxonomic keys, may exhibit limitations when depicting complex insect structures, as exemplified by the intricate morphology of insect mouthparts. This study explores the use of 3D models to enhance the learning experience in insect identification and morphology education. We developed an online course that incorporated interactive digital 3D models alongside instructional videos and assessments. Participants (N = 102), primarily undergraduate students in natural sciences, completed pre- and posttests to assess knowledge gains. Additionally, they completed a survey designed to evaluate learning satisfaction, self-efficacy, limitations of the learning tools, and to collect open-ended written feedback. A paired samples t-test revealed a significant increase in posttest scores compared to pretest scores (t = −17.71, P < 0.001). Most participants rated learning satisfaction and self-efficacy above 9 on a 0 to 10-point Likert scale survey. Participants highlighted the effectiveness of 3D models in species differentiation and morphological understanding. Feedback suggested potential improvements, including expanded insect coverage and interactive comparison tools. This study demonstrates that 3D models can significantly enhance insect morphology education, providing an engaging and effective learning tool for students and pest management professionals.

Utilizing the Fourth Dimension for Patient Education in Cardiovascular Surgery

Due to the complexity of Service-Oriented Architecture (SOA), cost and effort estimation for SOA-based software development is more difficult than that for traditional software development. Unfortunately, there is a lack of published work about cost and effort estimation for SOA-based software. Existing cost estimation approaches are inadequate to address the complex service-oriented systems. This paper proposes a novel framework based on Divide-and-Conquer (D&C) for cost estimation for building SOA-based software. By dealing with separately development parts, the D&C framework can help organizations simplify and regulate SOA implementation cost estimation. Furthermore, both cost estimation modeling and software sizing work can be satisfied respectively by switching the corresponding metrics within this framework. Given the requirement of developing these metrics, this framework also defines the future research in four different directions according to the separate cost estimation sub-problems.

The present study formulated a three-dimensional (3D) vehicle-pavement coupled model to simulate the pavement dynamic loads induced by the vehicle-pavement interaction where both the vehicle vibration and pavement deformation were considered. Based on this model, the effects of road surface conditions, vehicle parameters, and driving speed on pavement dynamic loads were analyzed. The impact factor, dynamic load coefficient, and frequency distribution of pavement loads were mainly concerned in this study. The simulated results indicated that under rough road conditions the dynamic loads of vehicles are significantly higher than the static loads. The developed methodology can be used to further study the vehicle-induced pavement response, and the loading information will be useful in analyzing vehicle-induced pavement damage.

Antimicrobial peptides (AMPs) have been recognized for their ability to target processes important for biofilm formation. Given the vast array of AMPs, identifying potential candidates remains a significant challenge, and prompts the need for preliminary in silico investigations prior to extensive in vitro and in vivo studies. We have developed Biofilm-AMP (B-AMP), a curated 3D structural and functional repository of AMPs relevant to biofilm studies. In its current version, B-AMP contains predicted 3D structural models of 5544 AMPs (from the DRAMP database) developed using a suite of molecular modeling tools. The repository supports a user-friendly search, using source, name, DRAMP ID, and PepID (unique to B-AMP). Further, AMPs are annotated to existing biofilm literature, consisting of a vast library of over 10,000 articles, enhancing the functional capabilities of B-AMP. To provide an example of the usability of B-AMP, we use the sortase C biofilm target of the emerging pathogen Corynebacterium striatum as a case study. For this, 100 structural AMP models from B-AMP were subject to in silico protein-peptide molecular docking against the catalytic site residues of the C. striatum sortase C protein. Based on docking scores and interacting residues, we suggest a preference scale using which candidate AMPs could be taken up for further in silico, in vitro and in vivo testing. The 3D protein-peptide interaction models and preference scale are available in B-AMP. B-AMP is a comprehensive structural and functional repository of AMPs, and will serve as a starting point for future studies exploring AMPs for biofilm studies. B-AMP is freely available to the community at https://b-amp.karishmakaushiklab.com and will be regularly updated with AMP structures, interaction models with potential biofilm targets, and annotations to biofilm literature.

Antimicrobial peptides (AMPs) have been recognized for their ability to target processes important for biofilm formation. Given the vast array of AMPs, identifying potential candidates remains a significant challenge, and prompts the need for preliminary in silico investigations prior to extensive in vitro and in vivo studies. We have developed Biofilm-AMP (B-AMP), a curated 3D structural and functional repository of AMPs relevant to biofilm studies. In its current version, B-AMP contains predicted 3D structural models of 5544 AMPs (from the DRAMP database) developed using a suite of molecular modeling tools. The repository supports a user-friendly search, using source, name, DRAMP ID, and PepID (unique to B-AMP). Further, AMPs are annotated to existing biofilm literature, consisting of a vast library of over 10,000 articles, enhancing the functional capabilities of B-AMP. To provide an example of the usability of B-AMP, we use the sortase C biofilm target of the emerging pathogen Corynebacterium striatum as a case study. For this, 100 structural AMP models from B-AMP were subject to in silico protein-peptide molecular docking against the catalytic site residues of the C. striatum sortase C protein. Based on docking scores and interacting residues, we suggest a preference scale using which candidate AMPs could be taken up for further in silico, in vitro and in vivo testing. The 3D protein-peptide interaction models and preference scale are available in B-AMP. B-AMP is a comprehensive structural and functional repository of AMPs, and will serve as a starting point for future studies exploring AMPs for biofilm studies. B-AMP is freely available to the community at https://b-amp.karishmakaushiklab.com and will be regularly updated with AMP structures, interaction models with potential biofilm targets, and annotations to biofilm literature.

IntroductionModern patient portals are powerful tools that foster communication between providers and patients. While increasing patient access to their medical records, these portals often only provide written radiology reports and...

We consider the coupling between three-dimensional (3D) and one-dimensional (1D) fluid-structure interaction (FSI) models describing blood flow inside compliant vessels. The 1D model is a hyperbolic system of partial differential equations. The 3D model consists of the Navier-Stokes equations for incompressible Newtonian fluids coupled with a model for the vessel wall dynamics. A non standard formulation for the Navier-Stokes equations is adopted to have suitable boundary conditions for the coupling of the models. With this we derive an energy estimate for the fully 3D-1D FSI coupling. We consider several possible models for the mechanics of the vessel wall in the 3D problem and show how the 3D-1D coupling depends on them. Several comparative numerical tests illustrating the coupling are presented.

This chapter presents a method for archiving and searching three-dimensional Native American ceramic vessels using geometric modeling techniques. Archaeological vessels are scanned and defined as a set of 3D triangulated meshes composed of points, edges and triangles. Our work includes modeling the data with parametric surfaces, extracting features to raise the level of abstraction of data, and organizing vessel data based on XML schema. A visual query interface on the web was developed that permits users to sketch or select sample vessel shapes to augment text and metric search criteria to retrieve original and modeled data, and interactive 2D and 3D models.

Conventional interactive 3D tree modeling systems are generally based on 2D input devices, and it's not convenient to generate desired 3D tree shape from 2D inputs due to the complexity of 3D tree structures. In this paper, we present a system for modeling trees interactively using a 3D gesture-based VR platform. The system contains a head-mounted display (HMD) and a 6-DOF motion controller for interaction. We propose an improved procedural modeling method to generate trees faster for VR platform. Using the 6-DOF motion controller, users can manipulate tree structures by a set of 3D interactive operations, including geometric editing using 3D gestures, sketching, brushing and silhouette-guided growth. Our interactions are more flexible and convenient than using traditional 2D input devices, e.g., we allow the user to simultaneously rotate and translate parts of a tree using a 3D gesture.

Starting from the stationary quantum Hamiltonian and using the theory of resolvence the authors rigorously define and analytically derive the stationary intrinsic ATI spectrum of an exactly solvable 3D model of laser-atom interaction. The result permits them to determine the phenomena of switching, suppression and disappearance of the ATI peaks as a function of the field intensity. The dependence of the ATI spectrum on the field modified ionisation gap and the broadening of the initial bound state are investigated. The modification of these spectra due to ponderomotive acceleration is also shown. The results are discussed with graphical illustrations and their implications for ATI in general are pointed out.