Smart room occupancy detection using neural networks and the puma optimization algorithm

Lithological mapping is a critical aspect of geological mapping that can be useful in studying the mineralization potential of a region and has implications for mineral prospectivity mapping. This is a challenging task if performed manually, particularly in highly remote areas that require a large number of participants and resources. The combination of machine learning (ML) methods and remote sensing data can provide a quick, low-cost, and accurate approach for mapping lithological units. This study used deep learning via convolutional neural networks and conventional ML methods involving support vector machines and multilayer perceptron to map lithological units of a mineral-rich area in the southeast of Iran. Moreover, we used and compared the efficiency of three different types of multispectral remote-sensing data, including Landsat 8 operational land imager (OLI), advanced spaceborne thermal emission and reflection radiometer (ASTER), and Sentinel-2. The results show that CNNs and conventional ML methods effectively use the respective remote-sensing data in generating an accurate lithological map of the study area. However, the combination of CNNs and ASTER data provides the best performance and the highest accuracy and adaptability with field observations and laboratory analysis results so that almost all the test data are predicted correctly. The framework proposed in this study can be helpful for exploration geologists to create accurate lithological maps in other regions by using various remote-sensing data at a low cost.

Learning What Makes Catalysts Good

Purpose:Machine learning (ML) has been increasingly used to quantify chemical exchange saturation transfer (CEST) effect. ML models are typically trained using either measured data or fully simulated data. However, training with measured data often lacks sufficient training data, while training with fully simulated data may introduce bias due to limited simulations pools. This study introduces a new platform that combines simulated and measured components to generate partially synthetic CEST data, and to evaluate its feasibility for training ML models to predict amide proton transfer (APT) effect.Methods:Partially synthetic CEST signals were created using an inverse summation of APT effects from simulations and the other components from measurements. Training data were generated by varying APT simulation parameters and applying scaling factors to adjust the measured components, achieving a balance between simulation flexibility and fidelity. First, tissue-mimicking CEST signals along with ground truth information were created using multiple-pool model simulations to validate this method. Second, an ML model was trained individually on partially synthetic data, in vivo data, and fully simulated data, to predict APT effect in rat brains bearing 9L tumors.Results:Experiments on tissue-mimicking data suggest that the ML method using the partially synthetic data is accurate in predicting APT. In vivo experiments suggest that our method provides more accurate and robust prediction than the training using in vivo data and fully synthetic data.Conclusion:Partially synthetic CEST data can address the challenges in conventional ML methods.

Precise and timely leaf area index (LAI) estimation for winter wheat is crucial for precision agriculture. The emergence of high-resolution unmanned aerial vehicle (UAV) data and machine learning techniques offers a revolutionary approach for fine-scale estimation of wheat LAI at the low cost. While machine learning has proven valuable for LAI estimation, there are still model limitations and variations that impede accurate and efficient LAI inversion. This study explores the potential of classical machine learning models and deep learning model for estimating winter wheat LAI using multispectral images acquired by drones. Initially, the texture features and vegetation indices served as inputs for the partial least squares regression (PLSR) model and random forest (RF) model. Then, the ground-measured LAI data were combined to invert winter wheat LAI. In contrast, this study also employed a convolutional neural network (CNN) model that solely utilizes the cropped original image for LAI estimation. The results show that vegetation indices outperform the texture features in terms of correlation analysis with LAI and estimation accuracy. However, the highest accuracy is achieved by combining both vegetation indices and texture features to invert LAI in both conventional machine learning methods. Among the three models, the CNN approach yielded the highest LAI estimation accuracy (R 2 = 0.83), followed by the RF model (R 2 = 0.82), with the PLSR model exhibited the lowest accuracy (R 2 = 0.78). The spatial distribution and values of the estimated results for the RF and CNN models are similar, whereas the PLSR model differs significantly from the first two models. This study achieves rapid and accurate winter wheat LAI estimation using classical machine learning and deep learning methods. The findings can serve as a reference for real-time wheat growth monitoring and field management practices.

This paper provides a literature review, comparative analysis and presents an original research of the use of Artificial Intelligence (AI) and Machine Learning (ML) technologies for cybersecurity with particular attention to intrusion detection. First, the research looks at conventional ML methods to make an analysis on malicious network activity detection on the CICIDS 2017 dataset. On top of the foundations, a network based large language model phi-3-mini is fine-tuned for intrusion detection using structured and network flow data. It takes natural language inputs of network properties, and enables the ability to predict scenario various intrusion or benignity. The combination of structured queries and natural language processing also presents a new mode for interacting with security systems, particularly for expert users. We also review literature on techniques used in AI based threat detection and malware analysis as well as automated incident response. Although the results show the promise of large language models to improve detection performance and accessibility above the baseline of what already exist, the study discusses challenges such as interpretability, resource demands, and robustness against adversarial inputs. In the post-Quantum age, such a model would be much valuable for assisting human operators to reinforce traditional network perimeter defenses and other security systems, that makes the current generation (albeit somewhat minimally) more effective against increasingly sophisticated and dynamic blackhat techniques of various threats.

Researchers have adopted model-centric artificial intelligence (AI) approaches in cheminformatics by using newer, more sophisticated AI methods to take advantage of growing chemical libraries. It has been shown that complex deep learning methods outperform conventional machine learning (ML) methods in QSAR and ligand-based virtual screening– but such approaches generally lack explanability. Hence, instead of developing more sophisticated AI methods (i.e., pursuing a model-centric approach), we wanted to explore the potential of a data-centric AI paradigm for virtual screening. A data-centric AI is an intelligent system that would automatically identify the right type of data to collect, clean and curate for later use by a predictive AI and this is required given the large volumes of chemical data that exist in chemical databases – PubChem alone has over 100 million unique compounds. However, a systematic assessment of the attributes and properties of suitable data is needed. We show here that it is not the result of deficiencies in current AI algorithms but rather, poor understanding and erroneous use of chemical data that ultimately leads to poor predictive performance. Using a new benchmark dataset of BRAF ligands that we developed, we show that our best performing predictive model can achieve an unprecedented accuracy of 99% with a conventional ML algorithm (SVM) using a merged molecular representation (Extended+ ECFP6 fingerprints), far surpassing past performances of virtual screening platforms using sophisticated deep learning methods. Thus, we demonstrate that it is not necessary to resort to the use of sophisticated deep learning algorithms for virtual screening because conventional ML can perform exceptionally well if given the right data and representation. We also show that the common use of decoys for training leads to high false positive rates and its use for testing will result in an over-optimistic estimation of a model’s predictive performance. Another common practice in virtual screening is defining compounds that are above a certain pharmacological threshold as inactives. Here, we show that the use of these so-called inactive compounds lowers a model’s sensitivity/recall. Considering that some target proteins have a limited number of known ligands, we wanted to also observe how the size and composition of the training data impact predictive performance. We found that an imbalance training dataset where inactives outnumber actives led to a decrease in recall but an increase in precision, regardless of the model or molecular representation used; and overall, we observed a decrease in the model’s accuracy. We highlight in this study some of the considerations that one needs to take into account in future development of data-centric AI for CADD.

The advent of the Smart Grid (SG) raises severe cybersecurity risks that can lead to devastating consequences. In this paper, we present a novel anomaly-based Intrusion Detection System (IDS), called ARIES (smArt gRid Intrusion dEtection System), which is capable of protecting efficiently SG communications. ARIES combines three detection layers that are devoted to recognising possible cyberattacks and anomalies against (a) network flows, (b) Modbus/Transmission Control Protocol (TCP) packets and (c) operational data. Each detection layer relies on a Machine Learning (ML) model trained using data originating from a power plant. In particular, the first layer (network flow-based detection) performs a supervised multiclass classification, recognising Denial of Service (DoS), brute force attacks, port scanning attacks and bots. The second layer (packet-based detection) detects possible anomalies related to the Modbus packets, while the third layer (operational data based detection) monitors and identifies anomalies upon operational data (i.e., time series electricity measurements). By emphasising on the third layer, the ARIES Generative Adversarial Network (ARIES GAN) with novel error minimisation functions was developed, considering mainly the reconstruction difference. Moreover, a novel reformed conditional input was suggested, consisting of random noise and the signal features at any given time instance. Based on the evaluation analysis, the proposed GAN network overcomes the efficacy of conventional ML methods in terms of Accuracy and the F1 score.

BackgroundSurgical site infection (SSI) is one of the most common types of health care–associated infections. It increases mortality, prolongs hospital length of stay, and raises health care costs. Many institutions developed risk assessment models for SSI to help surgeons preoperatively identify high-risk patients and guide clinical intervention. However, most of these models had low accuracies.ObjectiveWe aimed to provide a solution in the form of an Artificial intelligence–based Multimodal Risk Assessment Model for Surgical site infection (AMRAMS) for inpatients undergoing operations, using routinely collected clinical data. We internally and externally validated the discriminations of the models, which combined various machine learning and natural language processing techniques, and compared them with the National Nosocomial Infections Surveillance (NNIS) risk index.MethodsWe retrieved inpatient records between January 1, 2014, and June 30, 2019, from the electronic medical record (EMR) system of Rui Jin Hospital, Luwan Branch, Shanghai, China. We used data from before July 1, 2018, as the development set for internal validation and the remaining data as the test set for external validation. We included patient demographics, preoperative lab results, and free-text preoperative notes as our features. We used word-embedding techniques to encode text information, and we trained the LASSO (least absolute shrinkage and selection operator) model, random forest model, gradient boosting decision tree (GBDT) model, convolutional neural network (CNN) model, and self-attention network model using the combined data. Surgeons manually scored the NNIS risk index values.ResultsFor internal bootstrapping validation, CNN yielded the highest mean area under the receiver operating characteristic curve (AUROC) of 0.889 (95% CI 0.886-0.892), and the paired-sample t test revealed statistically significant advantages as compared with other models (P<.001). The self-attention network yielded the second-highest mean AUROC of 0.882 (95% CI 0.878-0.886), but the AUROC was only numerically higher than the AUROC of the third-best model, GBDT with text embeddings (mean AUROC 0.881, 95% CI 0.878-0.884, P=.47). The AUROCs of LASSO, random forest, and GBDT models using text embeddings were statistically higher than the AUROCs of models not using text embeddings (P<.001). For external validation, the self-attention network yielded the highest AUROC of 0.879. CNN was the second-best model (AUROC 0.878), and GBDT with text embeddings was the third-best model (AUROC 0.872). The NNIS risk index scored by surgeons had an AUROC of 0.651.ConclusionsOur AMRAMS based on EMR data and deep learning methods—CNN and self-attention network—had significant advantages in terms of accuracy compared with other conventional machine learning methods and the NNIS risk index. Moreover, the semantic embeddings of preoperative notes improved the model performance further. Our models could replace the NNIS risk index to provide personalized guidance for the preoperative intervention of SSIs. Through this case, we offered an easy-to-implement solution for building multimodal RAMs for other similar scenarios.

Frailty is a geriatric syndrome that may result in poor health outcomes such as hospitalization, disability, psychological distress, and reduced life satisfaction, and it is also associated with higher healthcare costs. The aim of this study is to classify frailty in elders at an early stage (pre-frail) to lower the risk of frailty and, hence, improve the quality of life. The other two classes in the classification task are frail and robust (non-frail). To achieve this, a dataset based on gait was utilized, which was recorded by an Inertial Measurement Unit (IMU) sensor, including gyroscope and accelerometer data. In this study, two approaches were assessed: the first used advanced Deep Learning (DL) algorithms to analyze raw IMU signals, and the second used conventional Machine Learning (ML) methods with hand-crafted features. The DL model, i.e., InceptionTime, beat the other algorithms in the DL approach with a remarkable test accuracy of 98%. On the ML side, Random Forest reported the most successful ML method, which achieved a test accuracy of 63.3%. For a careful assessment of the models, other evaluation metrics like Precision, Recall, and F1-score were also evaluated. The evaluation of both approaches produces research benefits for the classification of frailty in older people and allows for the investigation of new areas, promoting deeper comprehension and well-informed decision-making, particularly in healthcare systems.

This paper reports experimental results of speech emotion recognition by conventional machine learning methods and deep learning techniques. We use a selection of mel frequency cepstral coefficients (MFCCs) as features for the conventional machine learning classifiers. The convolutional neural network uses as features the mel spectrograms treated as images. We test both approaches over a state of the art free database that provides samples of 8 emotions recorded by 24 professional actors. We report and comment the accuracy achieved by each classifier in cross validation experiments. Results of our proposal are competitive with recent studies.

Unfolding Explainable AI for Brain Tumor Segmentation

Predicting how people choose their travel modes accurately is important in the transportation field. Machine learning (ML) and neural networks (NNs) have gradually become popular in recent years. However, which is better is seldom discussed in previous studies. Therefore, we collect several real-world travel datasets from different countries, and pick five typical ML models, six classic NN models, and ten new NN models for comparison. Some methods for improvement are also considered, including SMOTE, Near-Miss, and using focal loss. The results show that, when looking at the F1-score, the NN models do not perform as well as ML models. While the performances of different classic NN models are similar, making the neural network more complex does not improve the prediction results. Some new NN models can reach the level of ML models on small datasets, but they still perform poorly on large datasets. Due to such a result, we further discuss two important topics: why NN models are not as good as compared to the ones in some other fields, and why this phenomenon is not revealed in many previous papers. In summary, we think this study gives a good reference for future research on predicting travel modes and choosing the right models.

Machine learning for the intelligent analysis of 3D printing conditions using environmental sensor data to support quality assurance

The dengue virus is the most dangerous one that mosquitoes may spread to people. Despite attempts by the government, dengue outbreaks are becoming increasingly common in Bangladesh. Interventions in public health rely heavily on KAP (knowledge, attitude, and practice) studies. The primary goal of this research is to forecast the occurrence of dengue disease in the city of Dhaka using methods from machine learning and time series analysis and then to compare the models in order to find the one with the lowest MAPE. From January 2016 through July 2021, monthly data were retrieved for this study from WHO and the Directorate General of Health and Services (DGHS). According to the findings of this research, neural networks outperform time series analysis when it comes to making predictions. The best‐fitted neural network (NN) model was found in model 04 with 05 hidden layers which produced the minimum error model with the value of error 0.003032557, and the values of RMSE and MAPE are 7.588889e − 06 and 1.15273, respectively, for the prediction of the dengue fever in Dhaka city. In contrast, the original dengue data in the time series analysis is not stationary. Take the difference and run the unit root test by the augmented Dickey–Fuller (ADF) test to make it stationary. The dengue data series is stationary at the first‐order difference, as evidenced by the ACF and PACF, which show no noticeable spike in the first‐order difference. The ARIMA (6, 1, 1) model with the lowest AIC = −251.8, RMSE = 0.0310797, and MAPE = 15.2892 is the best choice model for predicting the dengue death rate. Therefore, from these two models, the NN model gives better prediction performance with the lowest value of MAPE. So, the neural network gives better prediction performance than time series analysis. The NN model forecasted 12‐month death rates of dengue fever that suggest the death rate in dengue fever falling month by month. This study is more innovative than any other research because this research approach is different from any other research approach. The model selection criteria are based on the most effective performance metrics MAPE, indicating the lowest error and better prediction performance. Therefore, from this research, the author suggests machine learning gives better prediction performance than time series analysis for any other prediction performance.

Novel occupancy detection method based on convolutional neural network model using PIR sensor and smart meter data