Smokestack Emission Prediction Based on LHS and SVM

Automatic recognition of skin symptom plays an importance role in the skin diagnosis and treatment. Feature selection is to increase the classification performance of skin symptom. In this paper, the effects of feature selection on the classification of 4-class skin symptoms (chloasma, blackhead, freckled and comedone) are analyzed. Support vector machine (SVM) is employed to construct classifier, the parameters setting is very crucial to the learning results and generalization ability of SVM, and many irrelevant and redundant features degrade the performance of classification, furthermore, the choice of SVM parameters is influenced by the feature subset taken into account and vice versa. So a joint optimization method for selecting features and SVM parameters is proposed. Genetic algorithms, which have a lot of improvements about fitness, crossover and mutation in comparison with simple genetic algorithms, is to achieve a balance between the classification accuracy and the size of the feature subsets selected and have a fast convergence rate. Furthermore, ‘one-against-one’ approach is used to solve multi-class classification problems and a comparison of the model performances is made among the results of the joint optimization and the single optimization of features or SVM parameters in the experiments. The simulation result shows that our approach can find subsets of features for 4-class skin symptoms classification with higher average cross validation accuracy and a higher rate of convergence compared with single optimization of features or SVM parameters.

흡수, 분포, 대사, 배설 특성 및 독성을 예측하기 위한 효과적인 툴을 개발하는 것은 신약개발의 초기단계에서 NCE(new chemical entity)에 대한 가장 중요한 업무 중의 하나이다. 최근에 이런 시도중의 하나로서 ADME/T(absorption, distribution, metabolism, excretion, toxicity)관련 성질들의 예측에 support vector machine(SVM)을 이용하고 있다. 그리고 SVM은 ADME/T 성질들을 정확하게 예측하는데 많이 사용 되고 있다. 그러나 SVM 모델링에 두 가지 문제가 있다. 특성 선택(feature selection) 과 매개변수 설정(parameter setting)은 여전히 해결해야 할 과제이다. 이 두 가지 문제들은 SVM 분류의 효율성과 정확도에 결정적인 영향을 끼친다. 특히 특성 선택과 최적화된 SVM 변수의 설정은 서로 영향을 주기 때문에 동시에 다루어져야 한다. 여기서 우리는 genetic algorithm(GA) – 특성 선택에 사용 – 과 grid search(GS) method– 변수최적화에 사용 – 두 가지를 통합하는 효과적인 해결책을 제시하였다. ADME/T관련 성질 중 하나인 심장부정맥을 야기시키는 hERG 이온채널 저해제 분류 모델이 여기서 제안된 GA-GS-SVM을 위해 할당되고 테스트 되었다. 1891개의 화합물을 가지는 트레이닝 셋으로 단일 모델 3개, 앙상블 모델 3개, 총 6개의 모델을 만들었고 175개의 외부 데이터를 테스트 셋으로 사용하여 검증하였다. 데이터의 불균형 문제를 해결하기 위하여 GA-GS-SVM 단일 모델에 의한 예측 정확도와 GA-GS-SVM 앙상블 모델 예측 정확도를 비교하였으며, 앙상블모델을 사용하여 예측의 정확도를 높일 수 있었다. Developing effective tools for predicting absorption, distribution, metabolism, excretion properties and toxicity (ADME/T) of new chemical entities in the early stage of drug design is one of the most important tasks in drug discovery and development today. As one of these attempts, support vector machines (SVM) has recently been exploited for the prediction of ADME/T related properties. However, two problems in SVM modeling, i.e. feature selection and parameters setting, are still far from solved. The two problems have been shown to be crucial to the efficiency and accuracy of SVM classification. In particular, the feature selection and optimal SVM parameters setting influence each other, which indicates that they should be dealt with simultaneously. In this account, we present an integrated practical solution, in which genetic-based algorithm (GA) is used for feature selection and grid search (GS) method for parameters optimization. hERG ion-channel inhibitor classification models of ADME/T related properties has been built for assessing and testing the proposed GA-GS-SVM. We generated 6 different models that are 3 different single models and 3 different ensemble models using training set - 1891 compounds and validated with external test set - 175 compounds. We compared single model with ensemble model to solve data imbalance problems. It was able to improve accuracy of prediction to use ensemble model.

Three dimension finite element model (3D-FEM) of the spherical motor is presented in this paper. By analysis of one pair of stator-rotor poles, nonlinear regression model of one pair of stator-rotor poles based on the support vector machine (SVM) is introduced. Parameters optimization of one pair of stator-rotor poles for the maximal torque is also introduced which is based on chaos and uses the SVM regression model. Simulation results prove that using the SVM nonparametric modeling and parameter optimization based on chaos provide a novel way for finding the optimal structural parameters of the spherical motor.

The Monte Carlo method exhibits generality and insensitivity to the number of stochastic variables, but is expensive for accurate Average Quality Measure (AQI) or Parametric Yield estimation of MOS VLSI circuits. In this contribution a new method of variance reduction technique, viz. the Latin Hypercube Sampling (LHS) method is presented which improves the efficiency of AQI estimation in integrated circuits especially for MOS digital circuits. This method is similar to the Primitive Monte Carlo (PMC) method except in samples generation step where the Latin Hypercube Sampling method is used. This sampling method is very simple and does not involve any further simulations. Moreover, it has a smaller variance with respect to the PMC estimator. Encouraging results have thus far been obtained. A 3-dimensional quadratic function, a high pass filter, and a CMOS delay circuit examples are included to demonstrate the efficiency of this technique.

The changes in China’s stock market are inseparable from the country’s economic development and macroeconomic regulation and control and have far-reaching significance in promoting China’s national economic growth. Compared with the Western developed capital market, China’s current stock market’s main smart investment strategy still has certain defects. Based on the SVM model, this paper establishes a predictive model that combines kernel parameters and parameter optimization to model. The mesh search method, genetic algorithm, and particle swarm optimization algorithm are used to optimize the parameters of the SVM under various kernel functions such as radial basis kernel function. The algorithm and particle swarm optimization algorithm optimize the parameters of the SVM to strengthen the applicability of the model in practice. The empirical results show that under the three-parameter optimization algorithms, the prediction results are higher than the random prediction accuracy, which indicates that it is effective to optimize the model by adjusting the parameters of the SVM. Among them, the SVM using the genetic algorithm parameter optimization under the radial basis kernel function shows the better prediction effect, which is the closest to the real value in the stock market forecast. The particle swarm algorithm supports the vector machine to predict the effect is slightly lower than the grid. Search method. In addition, through comparison experiments, the guess accuracy of BP neural network is worse than that of the support vector machine model before the adjustment. Finally, this paper uses the well-trained model to plan the stock smart investment plan.

Take a typical cross-section of rockfill embankment slope in Yaan-Luku highway as the research object, reliability analysis is studied under the condition of water table of 840.85m, 851.50m, and loading condition of natural state and horizontal seismic acceleration of 0.2g, respectively. Raw data use Kolmogorov-Smirnov test (K-S test) to determine the distribution type of parametric variation. And the parameters were sampling with Latin hypercube sampling (LHS) method and Monte Carlo (MC) method, respectively, to obtain state function and determine safety factors and reliability indexes. A conclusion is drawn that the times of simulation based on LHS method were less than Monte Carlo method. Also the convergence of failure probability is better than the Monte Carlo method. The safety factor is greater than one and the failure probability has reached to 35.45% in condition of earthquake, which indicating that the instability of rockfill embankment slope is still possible.

Incremental dynamic analysis (IDA) has been extended by introducing a set of structural models in addition to the set of ground motion records which is employed in IDA analysis in order to capture record‐to‐record variability. The set of structural models reflects epistemic (modeling) uncertainties, and is determined by utilizing the latin hypercube sampling (LHS) method. The effects of both aleatory and epistemic uncertainty on seismic response parameters are therefore considered in extended IDA analysis. The proposed method has been applied to an example of the four‐storey‐reinforced concrete frame, for which pseudo‐dynamic tests were performed at the ELSA Laboratory, Ispra. The influence of epistemic uncertainty on the seismic response parameters is presented in terms of summarized IDA curves and dispersion measures. The results of extended IDA analysis are compared with the results of IDA analysis, and the sensitivity of the seismic response parameters to the input random variable using the LHS method is discussed. It is shown that epistemic uncertainty does not have significant influence on the seismic response parameters in the range far from collapse, but could have a significant influence on collapse capacity. Copyright © 2008 John Wiley & Sons, Ltd.

Land use/cover (LU/LC) classification provides proxies of the natural and social processes related to urban development, providing stakeholders with crucial information. Remotely sensed images combined with supervised classification are common to define land use, but high-performance classifiers remain difficult to achieve, due to the presence of model hyperparameters. Conventional approaches rely on manual adjustment, which is time consuming and often unsatisfying. Therefore, the goal of this study has been to optimize the parameters of the support vector machine (SVM) algorithm for the generation of land use/cover maps from Sentinel-2 satellite imagery in selected humid and arid (three study sites each) climatic regions of Iran. For supervised SVM classification, we optimized two important parameters (gamma in kernel function and penalty parameter) of the LU/LC classification. Using the radial basis function (RBF) of the SVM classification method, we examined seven values for both parameters ranging from 0.001 to 1000. For both climate types, the penalty parameters (PP) showed a direct relationship with overall accuracy (OA). Statistical results confirmed that in humid study regions, LU/LC maps produced with a penalty parameter >100 were more accurate. However, for regions with arid climates, LU/LC maps with a penalty parameter >0.1 were more accurate. Mapping accuracy for both climate types was sensitive to the penalty parameter. In contrast, variations of the gamma values in the kernel function had no effect on the accuracy of the LU/LC maps in either of the climate zones. These new findings on SVM image classification are directly applicable to LU/LC for planning and environmental and natural resource management.

This paper proposes a hybrid Electroencephalogram (EEG) classification approach based on grey wolf optimizer (GWO) enhanced support vector machines (SVMs) called GWO-SVM approach for automatic seizure detection. In order to decompose EEG into five sub-band components, the discrete wavelet transform (DWT) was utilized to extracted features set. Then, this features are used to train the SVM with radial basis function (RBF) kernel function. Further, GWO was used for selecting the significant feature subset and the optimal parameters of SVM in order to obtain a successful EEG classification. The experimental results proved that the proposed GWO-SVM approach, able to detect epileptic and could thus further enhance the diagnosis of epilepsy with accuracy 100%. Furthermore, the proposed approach has been compared with genetic algorithm (GA) with support vector machines (GA-SVMs) and SVM using RBF kernel function. The computational results reveal that GWO-SVM approach achieved better classification accuracy outperforms both GA-SVM and typical SVMs.

Based on Latin Hypercube Sampling method, the crossover operation in GA is redesigned; combined with immune mechanism, chromosome concentration is defined and clonal selection strategy is designed, thus an Immune Genetic Algorithm is given based on Latin Hypercube Sampling for solving the Maximum Clique Problem in this paper. The examples shows the new algorithm in solution quality, convergence speed, and other indicators is better than the classical genetic algorithm and good point set genetic algorithm. On the other hand, the new algorithm is not inferior to such classical algorithms as dynamic local search, and it got better solutions to some examples.KeywordsMaximum Clique Problem(MCP)Genetic Algorithm (GA)Latin Hypercube Sampling(LHS)Artificial Immune Systems(AIS)Immune Genetic Algorithm based on Latin Hypercube Sampling(LIGA)

Abstract. The Support Vector Machine (SVM) is a theoretically superior machine learning methodology with great results in classification of remotely sensed datasets. Determination of optimal parameters applied in SVM is still vague to some scientists. In this research, it is suggested to use the Taguchi method to optimize these parameters. The objective of this study was to detect tree crowns on very high resolution (VHR) aerial imagery in Zagros woodlands by SVM optimized by Taguchi method. A 30 ha plot of Persian oak (Quercus persica) coppice trees was selected in Zagros woodlands, Iran. The VHR aerial imagery of the plot with 0.06 m spatial resolution was obtained from National Geographic Organization (NGO), Iran, to extract the crowns of Persian oak trees in this study. The SVM parameters were optimized by Taguchi method and thereafter, the imagery was classified by the SVM with optimal parameters. The results showed that the Taguchi method is a very useful approach to optimize the combination of parameters of SVM. It was also concluded that the SVM method could detect the tree crowns with a KHAT coefficient of 0.961 which showed a great agreement with the observed samples and overall accuracy of 97.7% that showed the accuracy of the final map. Finally, the authors suggest applying this method to optimize the parameters of classification techniques like SVM.

Support Vector Machine (SVM) is an effective method for reservoir layer classification. However, its classification performance is influenced by many factors. In this paper, we study how the main factors affect classification accuracy of SVM on oil data. We collect two well-logging dataset, use k-Cross Validation and Grid Search to find the optimal SVM parameters, and compare the classification performance of different kernel function. The experiment results show that the type of kernel function affects classification rate most and Polynomial performs best.

On Latin Hypercube sampling for efficient uncertainty estimation of satellite rainfall observations in flood prediction

Support vector machines are powerful and often used technique of supervised learning applied to classification. Quality of the constructed classifier can be improved by appropriate selection of the learning parameters. These parameters are often tuned using grid search with relatively large step. This optimization process can be done computationally more efficiently and more precisely using stochastic search metaheuristics. In this paper we propose adjusted bat algorithm for support vector machines parameter optimization and show that compared to the grid search it leads to a better classifier. We tested our approach on standard set of benchmark data sets from UCI machine learning repository. Additionally, proposed algorithm was compared to other approaches from the literature where our algorithm obtained more accurate classifiers, with larger percent of correct classifications, especially in the more realistic cases where separate test sets were used instead of cross validation only.

Improving forecasts, particularly the accuracy, efficiency, and precision of time-series forecasts, is becoming critical for authorities to predict, monitor, and prevent the spread of the Coronavirus disease. However, the results obtained from the predictive models are imprecise and inefficient because the dataset contains linear and non-linear patterns, respectively. Linear models such as autoregressive integrated moving average cannot be used effectively to predict complex time series, so nonlinear approaches are better suited for such a purpose. Therefore, to achieve a more accurate and efficient predictive value of COVID-19 that is closer to the true value of COVID-19, a hybrid approach was implemented. Therefore, the objectives of this study are twofold. The first objective is to propose intelligence-based prediction methods to achieve better prediction results called autoregressive integrated moving average-least-squares support vector machine. The second objective is to investigate the performance of these proposed models by comparing them with the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine. Our investigation is based on three COVID-19 real datasets, i.e., daily new cases data, daily new death cases data, and daily new recovered cases data. Then, statistical measures such as mean square error, root mean square error, mean absolute error, and mean absolute percentage error were performed to verify that the proposed models are better than the autoregressive integrated moving average, support vector machine model, least-squares support vector machine, and autoregressive integrated moving average-support vector machine. Empirical results using three recent datasets of known the Coronavirus Disease-19 cases in Malaysia show that the proposed model generates the smallest mean square error, root mean square error, mean absolute error, and mean absolute percentage error values for training and testing datasets compared to the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine models. This means that the predicted value of the proposed model is closer to the true value. These results demonstrate that the proposed model can generate estimates more accurately and efficiently. Compared to the autoregressive integrated moving average, support vector machine, least-squares support vector machine, and autoregressive integrated moving average-support vector machine models, our proposed models perform much better in terms of percent error reduction for both training and testing all datasets. Therefore, the proposed model is possibly the most efficient and effective way to improve prediction for future pandemic performance with a higher level of accuracy and efficiency.