- Research Article
- 10.13182/nt80-a32565
Authors
- Dec 01, 1980
- Nuclear Technology
- S.H Fistedis + 20 more +20
Authors
Since it was first used, nuclear energy’s control has been an important issue. With the generation of electricity as a major nuclear energy application, the improvement of nuclear power generation technology has been required by society, including power plant design, construction, and maintenance and radioactive waste disposal. Nuclear facilities must also take into account disaster prevention, as in the case of earthquakes and terrorist attacks, particularly because of the extensive potential and actual range of effects. This has made nuclear energy issues important considerations in JDR editorial meetings. In the July 16, 2007, case of the Niigataken Chuetsu-oki Earthquake, quake ground motion equaled or exceeded that presumed in the design of the Tokyo Electric Power Company’s Kashiwazaki-Kariwa Nuclear Power Station, the world’s largest nuclear power station. Specific safety objectives for nuclear power plants include stopping the nuclear reaction, cooling the nuclear reactor, preventing radioactive material emission, and shielding surroundings from radiation - all of which were almost completely achieved in this case. Many problems were also revealed, however. JDR examined a special issue on Kashiwazaki-Kariwa Nuclear Power Station earthquake resistance at an editorial meeting but determined that such a topic remains premature. In its stead, we have planned a number featuring the structural engineering of nuclear related facilities as a first step in a series of special issues on nuclear energy. The papers for this number were submitted mainly by the presenters of 20th International Conference on Structural Mechanics in Reactor Technology, held in Espoo, Finland, in 2009 with the catch phrase “Challenges Facing Nuclear Renaissance.” We greatly appreciate the many contributions to this issue, and would like to thank the reviewers, without whose cooperation this number could not have been published. Please note that, independent of special numbers such as this one, JDR looks forward to receiving papers on a wide range of fields related to disaster.
Authors
Authors
Effect of specimen geometries on the C∗ versus d a/d t master curve for type 316L stainless steel
This work deals with engineering components made of stainless steels working at high temperature and subjected to creep-fatigue loading history. The defect assessment procedures generally use the crack growth properties curve d a/d t versus C ∗ parameter for estimating the creep-crack growth. The ASTM E 1457-98 [ASTM E 1457-98. Standard test method for measurement of creep crack growth rates in metals, 1998] procedure proposes the rule to establish such a master curve. In particular, it is stipulated that this rule only applies for CT specimens. Previously [Laiarinandrasana L, Kabiri R, Drubay B. In: Gupta A, editor. Proceedings of the 16th international conference on structural mechanics in reactor technology, Washington, USA, 2001], some practical methodology to produce this crack growth curve on CT specimens has been described by introducing the way to determine the upper and lower limits of relevant experimental points and by adopting the ASTM E 1457-98 method to estimate the creep component of the load line displacement rate (d δ/d t behavior). This latter is the interesting part of the total displacement rate recorded during the test. This paper focuses on the application of the procedure proposed in [Laiarinandrasana L, Kabiri R, Drubay B. In: Gupta A, editor. Proceedings of the 16th international conference on structural mechanics in reactor technology, Washington, USA, 2001] on specimen geometries other than CT, such as circumferentially cracked round bar (CCRB) and double edged notched in tension (DENT) specimens. The d a/d t versus C ∗ curves issued from all of these specimens are compared. Discussion about the effect of geometry on these curves is carried out. Additionally, some finite element analyses have been performed in order to simulate the creep crack growth using the node release technique. These simulations allow to verify the validity of the proposed expressions of C ∗ and consequently the master curve of the 316L(N) stainless steel.
Read moreNuclear Power Plants Safety and Maintenance
With growing concerns about global warming, building more nuclear power plants is becoming one of the inevitable options to provide the world’s electricity. This is mainly because nuclear power is considered as the major source of “carbon-free” energy. Currently, extensive preventive maintenance, inspection, andmonitoring programs are developed to ensure safe and reliable operation of nuclear power plants. These programs involve safety analysis codes, equipment health monitoring, degradation-specific inspections, and plant lifecycle management (PLM). Although extensive effort has been invested to develop such programs, nuclear power plants continue to experience problems and therefore more accurate analysis and related researchwork still receive a great attention. This is mainly because the unresolved safety problems or lack in systems monitoring often causes significant safety-related events at nuclear power plants. Therefore, the demand for applied research work continues to grow in order tomitigate such events, increase the plant capacity factor, and gain public support for nuclear power as an alternative power source. This special issue identifies and analyzes major practical problems in nuclear energy and it contains 7 articles out of 14 articles that were initially received for publication. Even with the limited number of articles presented in this special issue, a wide range of topics are covered to present different experiences from several nuclear power plants and research institutions around the world. These topics are gathered in this issue to present the best engineering analyses, research effort, and practice with as little prejudice as possible. The issue starts by the novel method for optimization of the maintenance activities presented by A. Volkanovski and L. Cizelj in the nuclear power plant in order to improve plant safety. The authors consider different constraints on the optimization of the maintenance activities in the nuclear power plants. Three severe accident sequences of nuclear plants are discussed by G. Shao et al. to show that the natural circulation phenomenon results in heat transfer from the core to the pipes in RCS and consequently may cause the creep rupture of pipes in RCS and delay the severe accident progression. Also, S. Liu et al. were able to show that thermal stress failure caused by alternating operational loads is one of the important damage mechanisms in the nuclear power plants. Furthermore, R. K. Ur et al. discuss the impact of instrumentation and control components on the architecture of reactor protection systems. On the numerical and statistical analysis side, the article of S. U.-D. Khan et al. presents a modification to the neutron kinetics code, which originally works for the cylindrical type fuel elements, to plate type fuel nuclear reactor. Moreover, the study performed by M. El Nakla et al. has stressed the importance of the local scale observation leading to better understanding of the CHF phenomena in large pipe. They were able to predict the occurrence of critical heat flux in horizontal tubes using an extra correction factor to account for flow stratification. Finally, T. H. Woo contributed to this special issue with a paper on the nuclear power plant security. He presented dynamical assessment, which helps operator to find the dangerous situation in the site and avoid possible incidents that could be a catastrophe for theNPPs.We believe that this special issue provides interesting information on the recent progress in nuclear power research.
Read moreFluid-structure interactions in light water reactor systems
Fluid-structure interactions in light water reactor systems
2nd International Conference on Structural mechanics in reactor technology: Berlin, Germany, 10–14 September 1973
2nd International Conference on Structural mechanics in reactor technology: Berlin, Germany, 10–14 September 1973
Call for papers 11th international conference on structural mechanics in reactor technology : 18–23 August, 1991, Keio Plaza Inter-Continental Hotel, Nishi-Shinjuku, Tokyo, Japan
Call for papers 11th international conference on structural mechanics in reactor technology : 18–23 August, 1991, Keio Plaza Inter-Continental Hotel, Nishi-Shinjuku, Tokyo, Japan
Read moreProceedings of the First International Conference on Structural Mechanics in Reactor Technology: Berlin, Germany, 20–24 September 1971
Proceedings of the First International Conference on Structural Mechanics in Reactor Technology: Berlin, Germany, 20–24 September 1971
Read more11th Int. Conf. on Structural Mechanics in Reactor Technology (SMiRT 11)
11th Int. Conf. on Structural Mechanics in Reactor Technology (SMiRT 11)
Call for papers to be presented at the 2 nd international conference on: Structural mechanics in reactor technology : Berlin, Germany · 10–14 September 1973
Call for papers to be presented at the 2 nd international conference on: Structural mechanics in reactor technology : Berlin, Germany · 10–14 September 1973
Read moreNuclear Power: Time To Start Again
One of America’s best kept secrets is the success of its nuclear electric power industry. This paper presents data which support the construction and operating successes enjoyed by energy companies that operate nuclear power plants in the US. The result—the US nuclear industry is alive and well. Perhaps it’s time to start anew the building of nuclear power plants. Let’s take the wraps off the major successes achieved in the nuclear power industry. Over 20% of the electricity generated in the United States comes from nuclear power plants. An adequate, reliable supply of reasonably priced electric energy is not a consequence of an expanding economy and gross national product; it is an absolute necessity before such expansion can occur. It is hard to imagine any aspect of our business or personal lives not, in some way, dependent upon electricity. All over the world (in over 30 countries) nuclear power is a low-cost, secure, safe, dependable, and environmentally friendly form of electric power generation. Nuclear plants in these countries are built in six to eight years using technology developed in the US, with good performance and safety records. This treatise addresses the success experienced by the US nuclear industry over the last 40 years, and makes the case that this reliable, cost-competitive source of electric power can help support the economic engine of the country and help prevent experiences like the recent crises in California and the Northeast. Traditionally, the evaluation of electric power generation facility performance has focused on the ability of plants to produce at design capacity for high percentages of the time. Successful operation of nuclear facilities is determined by examining capacity or load factors. Load factor is the percentage of design generating capacity that a power plant actually produces over the course of a year’s operation. This paper makes the case that these operating performance indicators warrant renewed consideration of the nuclear option. Usage of electricity in the US now approaches total generating capacity. The Nuclear Regulatory Commission has pre-approved construction and operating licenses for several nuclear plant designs. State public service commissions are beginning to understand that dramatic reform is required. The economy is recovering and inflation is minimal. It’s time, once more, to turn to the safe, reliable, environmentally friendly nuclear power alternative.
Read moreNuclear nostalgia – Unveiling the sociotechnical imaginary of new nuclear power in Sweden
Recently, interest in nuclear power has surged. Several countries are either planning for or have already begun constructing new nuclear power plants. The European Union now includes nuclear in its green taxonomy (EU 2022/1214). Coupled with recent technical development, most notably 4th generation- and Small Modular Reactor technology, there are even talks of a renaissance of nuclear power.In Sweden, this phenomenon has manifested in plans to again build nuclear power plants. The government has launched a new nuclear program (Busch et al, 2023), laws are being changed (Andersson, 2023) and investigations are ongoing to facilitate the financing of new power plants (Dillén, 2024).In the past, Sweden was at the forefront of civil nuclear technology by building twelve reactors between 1971 and 1985 (IAEA, 2021). Thereafter followed, however, a period of decommissioning where six reactors were phased out (ibid, 2021). With recent plans to build new nuclear plants, Sweden has once again changed paths.According to theoretical insights of sociotechnical imaginaries (STI) this development can be understood as informed by visions of how nuclear power will aid in achieving a beneficial future (Jasanoff & Kim, 2015; 2009). Within this field of research, several papers have studied different nations’ constructions of (un)desirable futures of nuclear power (e.g., Felt, 2015; Jasanoff & Kim, 2009). Hence, an approach informed by STIs is adopted to study the Swedish turn towards building new nuclear power.Interestingly, many of the arguments for new nuclear power in Sweden evoke its history. Sweden is described as a pioneer in nuclear energy with extensive experience and a high level of skills in science and engineering. This act of evoking the past to describe the future highlights the complex temporalities involved in the establishment of STIs. Past experiences are recalled in the present and used to inform how the future is envisioned (c.f. nuclear memory, Keating & Storm, 2023), hence, creating an intrinsic entanglement of temporalities partly studied (e.g., Samimian-Darash et al, 2024), but more research into this entanglement is needed.Furthermore, as suggested by Hughes (2024), previous studies have not considered enough the extent to which emotions and affect aid in the forming of STIs. Due to the discursive nature of STIs they tend to be studied through policy documents, thus missing the embodied feelings involved in their enactment (ibid, 2024). Therefore, this study mainly relies on interviews with prominent individuals and experts in nuclear power (N=39), in addition to the analysis of newspapers and other written documentation.The result highlights how the evocation of nostalgia is central to the Swedish turn towards new nuclear power. Hence, also showing how the formulation of the STI is equally concerned with envisioning the past as with envisioning the future. The paper contributes to the general research on STIs, especially ongoing discussions on its intertwined temporalities and affective and emotional dimensions, as well as providing empirical insights on new nuclear power in Sweden.
Read moreDOE-NE Light Water Reactor Sustainability Program and EPRI Long-Term Operations Program. Joint Research and Development Plan
Nuclear power has contributed almost 20% of the total amount of electricity generated in the United States over the past two decades. High capacity factors and low operating costs make nuclear power plants (NPPs) some of the most economical power generators available. Further, nuclear power remains the single largest contributor (nearly 70%) of non-greenhouse gas-emitting electric power generation in the United States. Even when major refurbishments are performed to extend operating life, these plants continue to represent cost-effective, low-carbon assets to the nation’s electrical generation capability. By the end of 2014, about one-third of the existing domestic fleet will have passed their 40th anniversary of power operations, and about one-half of the fleet will reach the same 40-year mark within this decade. Recognizing the challenges associated with pursuing extended service life of commercial nuclear power plants, the U.S. Department of Energy’s (DOE) Office of Nuclear Energy (NE) and the Electric Power Research Institute (EPRI) have established separate but complementary research and development programs (DOE-NE’s Light Water Reactor Sustainability [LWRS] Program and EPRI’s Long-Term Operations [LTO] Program) to address these challenges. To ensure that a proper linkage is maintained between the programs, DOE-NE and EPRI executed a memorandum of understanding in late 2010 to “establish guiding principles under which research activities (between LWRS and LTO) could be coordinated to the benefit of both parties.” This document represents the third annual revision to the initial version (March 2011) of the plan as called for in the memorandum of understanding.
Read moreThe Nuclear Energy Debate and the Importance of Radioactive Waste Management
The preparation of this special issue dedicated to the topic of radioactive waste management coincides with some notable milestones. The year 2004 marks the 50th anniversary of the world’s first nuclear power plant in the town of Obnisk, near Moscow, which initiated the use of nuclear energy for civilian applications by providing power to residences and businesses. This year also marks the 25th anniversary of the Three Mile Island accident, which occurred at a nuclear power plant near Harrisburg, Pennsylvania, and effectively halted any new nuclear power plant considerations in the United States. A clean and sustainable energy source is nearly universally accepted as a necessity for our future, and the issues of radioactive waste management and permanent disposal solutions are inextricably linked to the exploration of nuclear power as a viable energy option. The actual and perceived risks associated with nuclear energy as well as radioactive waste—its generation, transportation, and disposal—pervade every aspect of the nuclear debate. Nearly all debate participants can concur with the commonly referenced mission of radioactive waste management programs: protection of the environment and human health and safety. However, structuring such programs and successfully executing them is a complex and lengthy process generally spanning several decades. For example, in the U.S., achieving operational status for the Waste Isolation Pilot Plant (WIPP), a deep geologic repository for the permanent disposal of transuranic wastes, involved more than four decades from concept to completion. The regulations governing the permanent disposal of radioactive waste at WIPP require demonstration of safe repository performance for a period of 10,000 years. A defining characteristic of the complexity associated with radioactive waste management programs is the wide spectrum of participants involved, each with strongly anchored and unique perspectives. Technical debate and discussion alone cannot resolve the divergent viewpoints and convictions of the various stakeholders, which may be grounded in technical, social, political, economic, or cultural backgrounds and interests. As an example, with respect to the disposition of radioactive waste, scientific and technical communities generally agree that radioactive waste can be disposed of by deep burial in suitable geologic formations that safely isolate the waste for time-frames of tens of thousands of years. An obvious challenge to scientists and engineers is defining the logic by which long-term predictions of geologic and weather conditions, groundwater behavior, and human activity covering these time-frames can be made and evaluated for repository performance. The inherent uncertainty associated with such predictive science complicates the public acceptance of
Read moreThe Green House Gas Abatement Study for Indonesia
The energy demand in Indonesia is projected to increase in the future. Based on the tentative results of the comprehensive assessment of different energy source for electricity, the demand will grow and reach the figure of about 8,200 Peta Joules in the year 2025. With regards to the energy supply in connection with climate change resulting from increasing Greenhouse Gases (GHG) in the atmosphere, and in line with the national energy policy which stresses on diversification, conservation, energy price and environmental awareness in energy supply development. The main objective of this study is to analyse GHG abatement by introduction various clean energy options such as renewable and nuclear energy in the Indonesian energy system by using IAEA Tool and to calculate the cost of GHG emission avoided. For the purpose of the case study, two cases were developed with some aggregations and assumptions for simplification. The first case Baseline case, which represents the current energy network (doing nothing case) and the second case defined GHG mitigation in the electric sector by replacing fossil power plants (600 MWe + 400 MWe) with various clean energy options GHG abatement technology (1000 MWe Nuclear PP). The result of the study shown that the total of CH4 reduction until the end of study period of about 1180.8 tons and 271.6 million tons for C02. The average reduction of the greenhouse gas are 4.4% per year for CH4 and 7.3% per year for C02, starting from introduction of nuclear power plant in year 2012. It is believed that, the economic competitiveness of nuclear power could significantly increase if GHG mitigation program were taken into account in the national energy planning. GHG abatement technology choice has to be made on the basis of economic aspects and its efficiency, so that the type of technology that is chosen is the most optimum as viewed from all aspects of the economy and the environment. Applying fuel diversification in the electric generation mix, nuclear and renewable energy, energy conservation as well as the demand side management can be carry out by mitigation of CH4 and C02 in the energy sector.
Read moreExploring Domestic Reasons for Cooperation on the Hinkley Point C Nuclear Power Project
As a result of the Chernobyl nuclear power plant accident in 1986, the British public generally has a negative attitude towards nuclear power, coupled with the lobbying of Greenpeace and other organizations opposed to nuclear energy. Since the completion of the Sizewell B nuclear power plant in 1995, the UK has not built a single new nuclear power plant and has been lagging behind in nuclear energy construction. With climate change and security of supply issues coming to the fore, it was not until the 2006 Energy White Paper that the government put nuclear energy back on the agenda. It took another decades of planning, review and approval before the UK finally signed an agreement with Electricité de France for the construction of the Hinkley Point C nuclear power station in 2016. The UK has not built a new nuclear power project for more than 20 years, and this paper analyzes the attitudinal preferences of different actors within the UK behind the cooperation on the Hinkley Point C nuclear power project, based on an understanding of the context and current situation of the UK in terms of climate change and security of energy supply.
Read more