Spoken Language Identification System Using Convolutional Recurrent Neural Network

In the field of medicine, with the introduction of computer systems that can collect and analyze massive amounts of data, many non-invasive diagnostic methods are being developed for a variety of conditions. In this study, our aim is to develop a non-invasive method of classifying respiratory sounds that are recorded by an electronic stethoscope and the audio recording software that uses various machine learning algorithms.In order to store respiratory sounds on a computer, we developed a cost-effective and easy-to-use electronic stethoscope that can be used with any device. Using this device, we recorded 17,930 lung sounds from 1630 subjects.We employed two types of machine learning algorithms; mel frequency cepstral coefficient (MFCC) features in a support vector machine (SVM) and spectrogram images in the convolutional neural network (CNN). Since using MFCC features with a SVM algorithm is a generally accepted classification method for audio, we utilized its results to benchmark the CNN algorithm. We prepared four data sets for each CNN and SVM algorithm to classify respiratory audio: (1) healthy versus pathological classification; (2) rale, rhonchus, and normal sound classification; (3) singular respiratory sound type classification; and (4) audio type classification with all sound types. Accuracy results of the experiments were; (1) CNN 86%, SVM 86%, (2) CNN 76%, SVM 75%, (3) CNN 80%, SVM 80%, and (4) CNN 62%, SVM 62%, respectively.As a result, we found out that spectrogram image classification with CNN algorithm works as well as the SVM algorithm, and given the large amount of data, CNN and SVM machine learning algorithms can accurately classify and pre-diagnose respiratory audio.

In this paper, alternative direction finding methods have been proposed using deep learning techniques. Firstly, Regeression and Classification models have created by using Convolutional Neural Networks (CNNs). In the second Convolutional Neural Networks and Recurrent Neural Networks (RNNs) have been utilized in the proposed methods. Despite having vast amount of direction finding studies, utilization of neural networks is scarce in literature and past works mostly only includes usage of CNNs. In this study, direction finding is performed by learning signals reaching multiple antenna arrays by networks. Created neural networks have been fed with different data formats and their performances against noisy and no-noise data have been shown. In addition, comparative analysis of the developed models were made in the similar Signal-to-Noise Ratio (SNR) range with the subspace based MUSIC algorithm, which is frequently used in direction finding.

The study presents the results of the development and testing of deep learning neural network architectures, which demonstrate high accuracy rates in classifying neurophysiological data, in particular hemodynamic brain activation patterns obtained by functional near-infrared spectroscopy, during solving mathematical problems on spatial-numerical associations. The analyzed signal represents a multidimensional time series of oxyhemoglobin and deoxyhemoglobin dynamics. Taking the specificity of the fNIRS signal into account, a comparative analysis of 2 types of neural network architectures was carried out: (1) architectures based on recurrent neural networks: recurrent neural network with long short-term memory, recurrent neural network with long short-term memory with fully connected layers, bidirectional recurrent neural network with long short-term memory, convolutional recurrent neural network with long short-term memory; (2) architectures based on convolutional neural networks with 1D convolutions: convolutional neural network, fully convolutional neural network, residual neural network. Trained long short-term memory recurrent neural network architectures showed worse results in accuracy in comparison with 1D convolutional neural network architectures. Residual neural network (model_Resnet) demonstrated the highest accuracy rates in three experimental conditions more than 88% in detecting age-related differences in brain activation during spatial-numerical association tasks considering the individual characteristics of the respondents’ signal.

The presented paper proposes a new speech command recognition model for novel engineering applications with limited resources. We built the proposed model with the help of a Convolutional Recurrent Neural Network (CRNN). The use of CRNN instead of Convolutional Neural Network (CNN) helps us to reduce the model parameters and memory requirement as per resource constraints. Furthermore, we insert transmute and curtailment layer between the layers of CRNN. By doing this we further reduce model parameters and float number of operations to half of the CRNN requirement. The proposed model is tested on Google’s speech command dataset. The obtained result shows that the proposed CRNN model requires 1/3 parameters as compared to the CNN model. The number of parameters of the CRNN model is further reduced by 45% and the float numbers of operations between 2% to 12 % in different recognition tasks. The recognition accuracy of the proposed model is 96% on Google’s speech command dataset, and on laboratory recording, its recognition accuracy is 89%.

Recent advancements in digital technologies have profoundly transformed healthcare delivery, sports analytics, and physical activity surveillance. The accelerated proliferation of wearable sensing devices and Internet of Things (IoT) infrastructures has facilitated unprecedented large-scale acquisition of multimodal physiological and kinematic data. However, accurate recognition of complex human activities remains a formidable challenge, primarily due to inadequate modeling of the spatiotemporal dependencies inherent in wearable-sensor signals. To address these fundamental limitations, this paper proposed a novel IoT-oriented activity recognition framework predicated on a Convolutional Recurrent Neural Network (CRNN) architecture, engineered to simultaneously model the spatial and temporal characteristics of multimodal wearable-sensor data streams. The proposed framework synergistically integrates Convolutional Neural Networks (CNNs) for hierarchical spatial feature extraction with Recurrent Neural Networks (RNNs) for temporal sequence modeling, thereby enabling more discriminative and robust activity classification. The methodological pipeline comprises several sequential stages: First, multidimensional wearable-sensor datasets are employed, encompassing physiological and inertial measurements including heart rate variability, triaxial accelerometer readings, gyroscopic angular velocity, magnetometer orientation data, and cutaneous temperature signals acquired from multiple anatomical locations. Second, raw sensor signals undergo preprocessing and temporal segmentation procedures to enhance data quality and optimize temporal representation. Third, spatiotemporal feature representations are learned autonomously within the hierarchical CRNN architecture. Finally, the proposed model is systematically evaluated through a comparative analysis with five representative baseline methods, encompassing both conventional machine learning algorithms and contemporary deep learning approaches. Experimental results demonstrate that the proposed CRNN framework achieves superior performance, achieving 98.2% classification accuracy, 97.2% sensitivity, 99.2% specificity, 97.4% recall, and 97.6% precision on the evaluated wearable-sensor datasets. Compared with existing methodologies, the proposed model consistently achieves higher recognition accuracy and greater generalization robustness, underscoring its efficacy for wearable-sensor-based activity recognition and its considerable potential for broader deployment in IoT-enabled monitoring paradigms and adaptable solutions in educational settings.

This paper proposes a novel deep learning architecture involving combinations of Convolutional Neural Networks (CNN) layers and Recurrent neural networks (RNN) layers that can be used to perform segmentation and classification of 5 cardiac rhythms based on ECG recordings. The algorithm is developed in a sequence to sequence setting where the input is a sequence of five second ECG signal sliding windows and the output is a sequence of cardiac rhythm labels. The novel architecture processes as input both the spectrograms of the ECG signal as well as the heartbeats' signal waveform. Additionally, we are able to train the model in the presence of label noise. The model's performance and generalizability is verified on an external database different from the one we used to train. Experimental result shows this approach can achieve an average F1 scores of 0.89 (averaged across 5 classes). The proposed model also achieves comparable classification performance to existing state-of-the-art approach with considerably less number of training parameters.

This work investigates the significance of the voiced and unvoiced region for detecting common cold from the speech signal. In literature, the entire speech signal is processed to detect the common cold and other diseases. This study uses a short-time energy-based approach to segment the voiced and unvoiced region of the speech signal. Then, frame-wise mel frequency cepstral coefficients (MFCC) features are extracted from the voiced and unvoiced segments of each speech utterance, and statistics (mean, variance, skewness, and kurtosis) are calculated to get the feature vector for each speech utterance. The support vector machine (SVM) is utilized to analyze the performance of features extracted from the voiced and unvoiced region. Result shows that the feature extracted from voiced segments, unvoiced segments, and complete active speech (CAS) gives almost similar results using the MFCC features and SVM classifier. Therefore, rather than processing the CAS, we can process the unvoiced speech segments, which have fewer frames compared to CAS and voiced regions of speech. The processing of solely unvoiced segments can reduce the time and computation complexity of a speech signal-based common cold detection system.

The Mel-Frequency Cepstral Coefficients (MFCC) feature can be cast-off in speaker recognition. The process of feature extraction of the speech signal using Mel-Frequency Cepstral Coefficients (MFCC) feature vectors will generate an acoustic speech signal. Locality Sensitive Hashing (LSH) is frequently used as a classifier for Big Data related problems. In this research, we proposed a new model based on MFCC and LSH to integrate into speaker recognition model. The main returns of our newly proposed model are to get robustness, effective and accurate results in comparison with MFCC+GMM, LPCC+GMM and MFCC+PNN models. This model also contributes to the literature of Big Data. In this model, first, we extract the MFCC features from the wave file then we applied LSH classifier on extracted feature to transform into hash-table. Finally, the hash-tables of train and test wave files are compared and obtained 92.66% speaker recognition accuracy. We compared the accuracy ratio of proposed model with other traditional models namely MFCC+GMM, MFCC+PNN, and LPCC+GMM. Experimental results show that proposed model is more accurate and robust than traditional models and good for speaker recognition.

Sound-event recognition often utilizes time-frequency analysis to produce an image-like spectrogram that provides a rich visual representation of original signal in time and frequency. Convolutional Neural Networks (CNN) with the ability of learning discriminative spectrogram patterns are suitable for sound-event recognition. However, there is relatively little effort that CNN makes full use of the important temporal information. In this paper, we propose MCRNN, a Convolutional Recurrent Neural Networks (CRNN) architecture for sound-event recognition, the letter “M” in the name “MCRNN” of our model denotes the multi-sized convolution filters. Richer features are extracted by using several different convolution filter sizes at the last convolution layer. In addition, cochleagram images are used as the input layer of the network, instead of the traditional spectrogram image of a sound signal. Experiments on the RWCP dataset shows that the recognition rate of the proposed method achieved 98.4% in clean conditions, and it robustly outperforms the existing methods, the recognition rate increased by 0.9%, 1.9% and 10.3% in 20 dB, 10 dB and 0 dB signal-to-noise ratios (SNR), respectively.

Significance of analytic phase of speech signals in speaker verification

Objective. Event-related potential (ERP) sensitivity to faces is predominantly characterized by an N170 peak that has greater amplitude and shorter latency when elicited by human faces than images of other objects. We aimed to develop a computational model of visual ERP generation to study this phenomenon which consisted of a three-dimensional convolutional neural network (CNN) connected to a recurrent neural network (RNN). Approach. The CNN provided image representation learning, complimenting sequence learning of the RNN for modeling visually-evoked potentials. We used open-access data from ERP Compendium of Open Resources and Experiments (40 subjects) to develop the model, generated synthetic images for simulating experiments with a generative adversarial network, then collected additional data (16 subjects) to validate predictions of these simulations. For modeling, visual stimuli presented during ERP experiments were represented as sequences of images (time x pixels). These were provided as inputs to the model. By filtering and pooling over spatial dimensions, the CNN transformed these inputs into sequences of vectors that were passed to the RNN. The ERP waveforms evoked by visual stimuli were provided to the RNN as labels for supervised learning. The whole model was trained end-to-end using data from the open-access dataset to reproduce ERP waveforms evoked by visual events. Main results. Cross-validation model outputs strongly correlated with open-access (r = 0.98) and validation study data (r = 0.78). Open-access and validation study data correlated similarly (r = 0.81). Some aspects of model behavior were consistent with neural recordings while others were not, suggesting promising albeit limited capacity for modeling the neurophysiology of face-sensitive ERP generation. Significance. The approach developed in this work is potentially of significant value for visual neuroscience research, where it may be adapted for multiple contexts to study computational relationships between visual stimuli and evoked neural activity.

The detection of emotions from speech is the aim of this paper. Speech consists of anger, joy and fear have very high and wide range in pitch, whereas Speech consists of sad and tired emotion have very low pitch. Speech Emotion detection technology can recognize human emotions to help machines better for understanding intentions of a user to improve the human-computer interaction. Classification model named Convolutional Neural Network (CNN) based on mainly Mel Frequency Cepstral Coefficient (MFCC) feature to detect emotion have been presented here. Different approaches have been discussed and compared to find best CNN model using different combinations of parameters. The models have been trained to distinguish eight different emotions such as calm, neutral, angry, sad, happy, disgust, fear, surprise. The proposed work shows that CNN 3 Layer model with RMSprop optimizer when trained with 80 Epochs works best among other CNN models for the RAVDESS dataset.

A hybrid model based on neural networks for biomedical relation extraction

In existing convolutional neural networks (CNNs), both convolution and pooling are locally performed for image regions separately, no contextual dependencies between different image regions have been taken into consideration. Such dependencies represent useful spatial structure information in images. Whereas recurrent neural networks (RNNs) are designed for learning contextual dependencies among sequential data by using the recurrent (feedback) connections. In this work, we propose the convolutional recurrent neural network (C-RNN), which learns the spatial dependencies between image regions to enhance the discriminative power of image representation. The C-RNN is trained in an end-to-end manner from raw pixel images. CNN layers are firstly processed to generate middle level features. RNN layer is then learned to encode spatial dependencies. The C-RNN can learn better image representation, especially for images with obvious spatial contextual dependencies. Our method achieves competitive performance on ILSVRC 2012, SUN 397, and MIT indoor.

The unmanned aerial vehicle (UAV) industry is developing rapidly, and the application of UAVs is becoming increasingly widespread. Due to the lowering of the threshold for using UAVs, the random flight of UAVs poses safety hazards. In response to the safety risks associated with the unauthorized operation of UAVs, research on anti-UAV technology has become imperative. This study proposes an improved sound feature extraction method that utilizes the frequency distribution features of UAV sounds. By analyzing the spectrogram of UAV sounds, it was found that the classic Mel Frequency Cepstral Coefficients (MFCC) feature extraction method does not match the frequency bands of UAV sounds. Based on the MFCC feature extraction algorithm framework, an improved frequency band feature extraction method was proposed. This method replaces the Mel filter in the classic algorithm with a piecewise linear function with the frequency band weight as the slope, which can effectively suppress the influence of low- and high-frequency noise and fully focus on the different frequency band feature data of UAV sounds. In this study, the actual flight sounds of UAVs were collected, and the sound feature matrix of UAVs was extracted using the frequency band feature extraction method. The sound features were classified and recognized using a Convolutional Neural Network (CNN). The experimental results show that the frequency band feature extraction method has a better recognition effect compared to the classic MFCC feature extraction method.