Structural Assessment and Damage Identification Algorithms Using Binary Data

This study proposes a novel strategy for damage identification in aircraft structures. The strategy was evaluated based on the simulation of the binary data generated from self-powered wireless sensors employing a pulse switching architecture. The energy-aware pulse switching communication protocol uses single pulses instead of multi-bit packets for information delivery resulting in discrete binary data. A system employing this energy-efficient technology requires dealing with time-delayed binary data due to the management of power budgets for sensing and communication. This paper presents an intelligent machine-learning framework based on combination of the low-rank matrix decomposition and pattern recognition (PR) methods. Further, data fusion is employed as part of the machine-learning framework to take into account the effect of data time delay on its interpretation. Simulated time-delayed binary data from self-powered sensors was used to determine damage indicator variables. Performance and accuracy of the damage detection strategy was examined and tested for the case of an aircraft horizontal stabilizer. Damage states were simulated on a finite element model by reducing stiffness in a region of the stabilizer's skin. The proposed strategy shows satisfactory performance to identify the presence and location of the damage, even with noisy and incomplete data. It is concluded that PR is a promising machine-learning algorithm for damage detection for time-delayed binary data from novel self-powered wireless sensors.

Recent advances in energy harvesting technologies have led to the development of self-powered monitoring techniques that are energy-efficient. This study presents an intelligent damage identification strategy for plate-like structures based on the data provided by a network of self-powered sensors that communicate through a pulse switching protocol, which has been demonstrated as an effective means for minimizing communication energy demands. The energy-aware pulse switching communication architecture uses single pulses instead of multi-bit packets for information delivery, resulting in discrete binary data. A system employing such an energy-efficient technology requires dealing with power budgets for sensing and communication of binary data, which leads to time delay constraints. In this paper, a novel machine learning framework incorporating low-rank matrix decomposition, pattern recognition, and a statistical approach is proposed to overcome challenges inherent in algorithm design for damage identification using time-delayed binary data. Performance and effectiveness of the proposed energy-aware damage identification strategy was examined for the case of a dynamically loaded plate. Damage states were simulated on a finite element model by reducing stiffness in a region of the plate. Results show that the presence and location of the damage can be effectively identified even with noisy features and missing data. The performance and applicability of the proposed localized damage detection strategy for plate-like structures using discrete time-delayed binary data from a novel wireless sensor network is thus demonstrated.

Structural damage identification based on metaheuristic algorithms is an important part of structural health monitoring with great potential. However, the metaheuristic intelligent algorithms probably have flaws of slow convergence speed and low calculation accuracy, which need to be improved to address engineering optimization problems. In this paper, the black widow optimization (BWO) algorithm is used for structural damage identification. In addition, a multistrategy fusion–improved BWO (IBWO) algorithm is proposed by introducing the tent chaotic mapping, the golden sine equation, the gazelle wandering equation, and the boundary treatments. First, in the population initialization stage, tent chaotic mapping is introduced to improve the quality of the initial solution. Second, the golden sine strategy is used to acquire the optimal solution quickly in local search. Then, the motion equation of the gazelle algorithm is employed to enhance the global search ability and avoid the algorithm falling into the local optimal solution. Finally, the boundary processing strategy is presented to reduce the calculation of solutions and improve the optimization efficiency. A novel damage identification objective function is redefined by combining the modal assurance criterion and the modal flexibility. Then, a two‐story rigid frame structure is utilized for numerical simulations. Moreover, experimental studies with a simply supported beam were carried out to verify the performance of the proposed damage identification method. Simulation results and experimental studies demonstrate that, even with the interference of strong noise, the IBWO algorithm has a higher accuracy and efficiency in damage identification compared to the BWO algorithm.

Purpose Aiming at the problems of high cost, high risk and traffic impact of in situ load testing of Bridges after fire, this paper proposes a fire bridge structural damage identification method based on a fire dynamics simulator (FDS)-Kriging model modification and a unit modal strain energy damage index, so as to effectively assess the damage of bridge structures after fire. Determine whether it can continue to be used and whether it affects driving safety. Design/methodology/approach Propose a fire bridge structural damage identification method to establish the FDS-Kriging model correction. Findings The finite element model of the fire bridge modified using FDS-Kriging approach can reflect the actual situation of the bridge structure more accurately, and the damage location and degree identified by the modal strain energy method are consistent with the actual bridge. Therefore, the effectiveness of the proposed method has been verified, and a new strategy for fire bridge damage identification has been provided. Research demonstrates that the finite element model of the fire-damaged bridge, modified using the FDS-Kriging method, can more accurately reflect the actual structural state. Moreover, the damage location and severity identified via the modal strain energy method align well with the actual bridge conditions. Thus, the effectiveness and engineering applicability of the proposed method are validated, offering a comprehensive new strategy and technical support for the integrated performance evaluation, damage identification and reliability analysis of fire-damaged bridges. Originality/value By determining the finite element correction interval and combining it with the Kriging model, the method realizes the fine correction of the finite element model of the fire bridge. Structural damage identification is carried out by using the unit modal strain energy damage index. This verifies the effectiveness and engineering applicability of the proposed method, which offers a novel approach and technical support for the comprehensive performance evaluation, damage identification and reliability analysis of fire-damaged bridges.

Considerable attention has recently been focused on classification and regression-based convolutional neural network (CNN) and long short-term memory (LSTM) due to their excellent performance in capturing complex spatial and temporal information characteristics for structural damage identification. However, few studies have considered structural damage identification as a classification and regression problem. In addition, bridges in practical engineering are vulnerable to various environmental and vehicle loading conditions. Hence, this study proposed a new two-stage CNN–LSTM configuration for bridge damage identification using vibration data considering the influence of temperatures. First, a classification-based CNN–LSTM is designed to perform multiclass damage detection tasks, and then a regression-based CNN–LSTM is developed for damage localization and severity prediction tasks. The performance of the proposed damage identification method was evaluated through a simulation dataset of a concrete highway bridge model and a field experiment dataset of Z24-bridge (Switzerland). In addition, a set of statistical evaluation metrics such as sparse categorical cross-entropy loss, accuracy, confusion matrix, mean squared loss, mean absolute error, mean absolute percentage error, and coefficient of determination were used to compare the damage identification performance of the proposed CNN–LSTM configuration with a regular CNN model and conventional machine learning (ML) algorithms. Prediction results indicate that the proposed CNN–LSTM model outperforms the regular CNN model and conventional ML algorithms for bridge damage identification.

This paper proposes a novel method for structural damage identification that integrates the power spectral density (PSD) of structural acceleration responses with densely connected convolutional networks (DenseNet). The method transforms the training object of the DenseNet into a numerical matrix (PSD matrix) for structural damage identification. Leveraging transfer learning, the DenseNet models are initially trained on simulated data and further fine‐tuned using experimental data to enhance robustness and generalization. Results demonstrate that frequency‐domain signals processed by PSD significantly enhance model performance, achieving lower mean squared error (MSE), higher Pearson’s correlation coefficient ( R value), and reduced mean absolute error (MAE) compared to time‐domain signals. The effectiveness of this method was verified on a six‐story frame structure. This study underscores the efficacy of transfer learning in bridging the gap between simulated and real‐world data, thereby facilitating effective structural health monitoring and damage identification.

As sensor monitoring technology continues to evolve, structural online monitoring and health management have found numerous applications across various fields. However, challenges remain concerning the real-time diagnosis of structural damage and the accuracy of dynamic reliability predictions. In this paper, a structural online damage identification and dynamic reliability prediction method based on Unscented Kalman Filter (UKF) is presented. Specifically, in the Wiener degradation process with random effects on structural performance, the structural damage identification is initially realized using UKF. Following that, the EM algorithm is employed for estimating the performance model parameters. Eventually, dynamic reliability prediction is realized based on conditional probability. The simulation results indicate that the method effectively estimates the damage state during the structure’s use while providing accurate, real-time, and dynamic reliability predictions for the system.

Structural damage identification using strain mode differences by the iFEM based on the convolutional neural network (CNN)

Wireless Smart Sensor Networks (WSSN) facilitates a new paradigm to structural health monitoring (SHM) for civil infrastructure. Conventionally, SHM systems employing wired sensors and central data acquisition have been used to characterize the state of a structure; however, wide-spread implementation has been limited due to difficulties in cabling, high equipment cost, and long setup time. WSSNs offer a unique opportunity to overcome such difficulties. Recent advances in sensor technology have realized low-cost, smart sensors with on-board computation and wireless communication capabilities, making deployment of a dense array of sensors on large civil structures both feasible and economical. Wireless smart sensors have shown their tremendous potential for SHM in recent full-scale bridge monitoring examples. However, structural damage identification in WSSNs, a primary objective of SHM, has yet to reach its full potential. This paper presents an implementation of the stochastic dynamic damage locating vector (SDDLV) method on the Imote2 sensor platform and experimental validation in a laboratory environment. The WSSN application is developed based on the Illinois SHM Project (ISHMP) Services Toolsuite (http://shm.cs.uiuc.edu), combining decentralized data aggregation, system identification, receptance-based damage detection, and global damage assessment. The laboratory experiment uses a three-dimensional truss structure with a network of Imote2 sensors for decentralized damage identification. Future efforts to deploy a long-term structural health monitoring system for a fullscale steel truss bridge are also described.

Structure damage identification in dams using sparse polynomial chaos expansion combined with hybrid K-means clustering optimizer and genetic algorithm

Vibration-based damage identification and structural health monitoring have been developed in recent years. However, it is still a challenge to effectively extract the information of structural damage from a large amount of monitoring data and to realize the rapid detecting damages and assessing structural conditions of bridge structures under seismic excitation. To address this problem, transmissibility function (TF) is used in this paper, and based on the seismic monitoring data of bridge structures, an intelligent algorithm integrating transmissibility function and support vector machine (SVM) is developed for multi-level/scale structural damage identification under seismic excitation. Firstly, the TF is calculated with the measured structural vibration responses. Then, the indicator takes the sum of transmissibility along the specific frequency range is used as input for SVM. Finally, the classification algorithm of support vector machine is employed to structural damage alarming under earthquake. The proposed method could eliminate the influence of external excitations because transmissibility function only depends on the measured seismic responses of structures and the information of external excitations is not required. Further, the proposed method is sensitive to the structural damage. To illustrate the performances and feasibility of the proposed algorithm, the damage identification of numerical simulation under seismic excitation is studied.

In recent years, data mining technology has been employed to solve various Structural Health Monitoring (SHM) problems as a comprehensive strategy because of its computational capability. Optimization is one the most important functions in Data mining. In an engineering optimization problem, it is not easy to find an exact solution. In this regard, evolutionary techniques have been applied as a part of procedure of achieving the exact solution. Therefore, various metaheuristic algorithms have been developed to solve a variety of engineering optimization problems in SHM. This study presents the most applicable as well as effective evolutionary techniques used in structural damage identification. To this end, a brief overview of metaheuristic techniques is discussed in this paper. Then the most applicable optimization-based algorithms in structural damage identification are presented, i.e. Particle Swarm Optimization (PSO), Genetic Algorithm (GA), Imperialist Competitive Algorithm (ICA) and Ant Colony Optimization (ACO). Some related examples are also detailed in order to indicate the efficiency of these algorithms.

Experimental study on structural damage identification of multi-sensor separated channel network

In this paper, based on the study of the Two-Dimensional Principal Component Analysis (2DPCA), Two-Dimensional Principal Component Analysis (2DPCA) and fuzzy set theory, we propose a integrated face recognition algorithm based on wavelet subspace. This method can make good use of the advantages of each single method, and also can make up for the defect of each other. The comparison of the results of the different methods identification effect on the ORL、YALE and FERET face database show, the integrated method proposed in this paper improves the recognition rate, and it also reduces the training and classification time as well. Key word: face recognition; Two-Dimensional Principal Component Analysis (2DPCA); Two-Dimensional Linear Discriminant Analysis (2DLDA); fuzzy set theory; feature extraction be divided into several categories:the method based on geometric features、the method based on model、the method based on the statistical、the method based on neural network method and the method of combining multiple classifiers, this paper mainly focuses on the method based on statistics. The method based on statistical faced the image as random vector, thus using some statistical methods to analyze the face model, the most representative methods include the eigenface method based on principal component analysis which proposed by Turk M (2)

Composite structures are generally more susceptible to impact damage than non-composite structures, and early identification of damage is the primary goal of structural health monitoring (SHM). If such damage remains undetected or reaches a critical size, it can lead to sudden collapse and catastrophic failure. Modern SHM methods aim to preserve the integrity of composite structures through continuous inspection, monitoring, and damage assessment, including detection, localization, quantification, classification, and prognosis. These methods use sensor-based technologies to assess vibration, extension, and acoustic and thermal emission. This paper provides a review of various computational methods including physics-based methods (signal processing techniques, modal analysis, and finite element model updating) and optimization methods (inverse problems, particle swarm optimization, topology optimization, genetic algorithms, time series analysis, and hybrid techniques), alongside machine learning methodologies employing neural networks as well as deep learning for damage identification in composite structures. These computational and learning-based techniques are widely applied in the development of algorithms, optimization strategies, and hybrid frameworks for SHM. The review further summarizes the applications, advantages, and limitations of each method according to structure type and damage characteristics. The key emphasis of this review is on integrating computational approaches, as well as machine learning, to enhance the efficiency of damage identification. The conclusion is drawn based on an overview of the literature, focusing on the contributions of different computational methods and machine learning for damage identification in composites.