Structural Topology Design Optimization Using the Binary Bat Algorithm

Isogeometric analysis (IGA) connects CAE with standard CAD design tools and has been utilized for a decade in structural optimization. FEA has a number of drawbacks, including a lack of linkage between analytic and geometric models, a shortage of continuity between components, and a lack of accuracy for high-order elements. Isogeometric analysis effectively overcomes these obstacles. This paper proposes the isogeometric topological optimization mathematical model depending on the asymmetric constitutive relationship of tension and compression microscopic materials. We provide a new density-based topology optimization formulation in which the design domain is limited to the B-spline space. A rectangular domain with a tensor-product is embedded in a design domain that is arbitrarily shaped. The density field is represented using B-splines. The intrinsic filter provided by the B-spline representation for topology optimization is governed by the degrees of B-spline and the knot spans. This B-spline effectively removes numerical artifacts and controls the minimum feature-length in; when the B-spline basis functions span many analysis elements. Benchmark problems in structural topology optimization are computed through Evolutionary Structural Optimization (ESO) algorithm. Comparisons of the optimal structure topologies using finite element analysis and isogeometric collocation methods are analyzed. The influence of different tension-compression stiffness ratios on the final structure topologies is listed and analyzed. The numerical results show the reliability and performance of the proposed mathematical formulation and asymmetry of natural structure.

With the rapid advancement of computing technology, mathematical modeling and computer simulations have become common and standard methods for design of complex systems. To exercise these models intelligently and eliminate the burden of manual iteration, manipulating inputs and reviewing outputs, optimization strategies are applied in a simulation-based design environment. In reality, the knowledge that engineers have about the design problem is imperfect and incomplete, uncertainty always exists in simulation-based design. The conventional deterministic optimization techniques do not consider the impact of such uncertainties. If the system responses driving the design decisions are very sensitive to these uncertainties, serious problems might confront the designer. Performance of the actual system may differ greatly from expected optimum performance. Again, if the design solution is near one or more constraint boundaries, then even slight uncertainties or changes in the operating environment could produce failed, unsafe designs, and/or result in substantial performance degradation. In recent years, the concept of reliability and robust design has become very popular. Probabilistic design analysis and statistical modeling allow the identification of designs that qualify as not only feasible, but as consistently feasible in the face of uncertainty. Reliability based topology optimization (RBTO) extends the reliability notion to the area of structural topology optimization. Although reliability based design optimization (RBDO) is a well established research area, very few work has been presented in the area of RBTO. In this study, we give an overview of the various works done in the field of RBTO. Ever since Bendsoe and Kikuchi introduced the topology optimization using a homogenization method, many topology optimization methods have been developed for the both linear and nonlinear structures. Traditional topology optimization methods drive the topology of a structure to an optimum design based on the constraint on mass. Kharmanda et al. introduced reliability constraints in deterministic topology optimization problem. They proposed a heuristic strategy that aims to reduce mass while improving the reliability level of the structure without greatly increasing its weight. But the limit state function used by them was not based on failure criteria for the structure. Their formulation considered uncertainty with respect to ∗Design Automation Laboratory †Advisor geometrical dimension and applied load only. Also their reliability analysis seems to be independent of the boundary and loading condition, so their results showed similar values for the uncertain variables for different structures. Tovar et al. have developed the Hybrid Cellular Automaton (HCA) method for structural synthesis of continuum material where the state of each cell is defined by both density and strain energy. In Agarwal, a decoupled RBDO approach is employed such that the topology optimization is separate from the reliability analysis. Patel et al. showed the use of RBTO using the gradient free Hybrid Cellular Automata (HCA) method. Their formulation incorporates uncertainty with respect to material property also. They considered limit state function based on failure modes on the output displacements. This study aims at giving a comparative study on these methods. It points out the advantages and disadvantages of the methods, and their significance in the field of RBTO. As large numbers of design variables are associated with continuum topology optimization problems, RBTO methods are inherently computationally expensive because of additional required system analysis associate with RBDO. Based on the observations, this study presents an efficient method for incorporating reliability analysis in topology optimization.

Topology optimization is the procedure of determining the connectivity, shape and location of voids inside a given design domain. This chapter proposes a quantum-inspired evolutionary algorithm (QEA) for structural topology optimization. It reviews the formulation of the continuum structural topology optimization model and the characteristics of quantum computing. The chapter also proposes the detailed implementation of a QEA-based topology optimization. It discusses two issues: the density-based continuum structural topology optimization formulation and the characteristics of quantum computing, which may be conducive to reducing the computational expense of topology optimization. The entire theoretical procedure of quantum-inspired topology optimization, which mainly combines FEM analysis, design sensitivity solution and quantum-inspired search, is accomplished for continuum structures. As the experimental implementation of quantum computation needs initialization, coherent manipulation, control and read of the fragile quantum system, practically building quantum computers has proved extremely difficult.

Genetic algorithms (GAs) have become a popular optimization tool for many areas of research and topology optimization an effective design tool for obtaining efficient and lighter structures. In this paper, a versatile, robust and enhanced GA is proposed for structural topology optimization by using problem-specific knowledge. The original discrete black-and-white (0–1) problem is directly solved by using a bit-array representation method. To address the related pronounced connectivity issue effectively, the four-neighbourhood connectivity is used to suppress the occurrence of checkerboard patterns. A simpler version of the perimeter control approach is developed to obtain a well-posed problem and the total number of hinges of each individual is explicitly penalized to achieve a hinge-free design. To handle the problem of representation degeneracy effectively, a recessive gene technique is applied to viable topologies while unusable topologies are penalized in a hierarchical manner. An efficient FEM-based function evaluation method is developed to reduce the computational cost. A dynamic penalty method is presented for the GA to convert the constrained optimization problem into an unconstrained problem without the possible degeneracy. With all these enhancements and appropriate choice of the GA operators, the present GA can achieve significant improvements in evolving into near-optimum solutions and viable topologies with checkerboard free, mesh independent and hinge-free characteristics. Numerical results show that the present GA can be more efficient and robust than the conventional GAs in solving the structural topology optimization problems of minimum compliance design, minimum weight design and optimal compliant mechanisms design. It is suggested that the present enhanced GA using problem-specific knowledge can be a powerful global search tool for structural topology optimization. Copyright © 2005 John Wiley & Sons, Ltd.

The quality of service (QoS) multicast routing problem is one of the main issues for transmission in communication networks. It is known to be an NP-hard problem, so many heuristic algorithms have been employed to solve the multicast routing problem and find the optimal multicast tree which satisfies the requirements of multiple QoS constraints such as delay, delay jitter, bandwidth and packet loss rate. In this paper, we propose an improved chaotic binary bat algorithm to solve the QoS multicast routing problem. We introduce two modification methods into the binary bat algorithm. First, we use the two most representative chaotic maps, namely the logistic map and the tent map, to determine the parameter [Formula: see text] of the pulse frequency [Formula: see text]. Second, we use a dynamic formulation to update the parameter α of the loudness [Formula: see text]. The aim of these modifications is to enhance the performance and the robustness of the binary bat algorithm and ensure the diversity of the solutions. The simulation results reveal the superiority, effectiveness and efficiency of our proposed algorithms compared with some well-known algorithms such as Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Jumping Particle Swarm Optimization (JPSO), and Binary Bat Algorithm (BBA).

During the last 20 years, structural optimization has become one of the most important topics of engineering applications. Design optimization of structure has been an interesting area of research in the field of engineering design for its ability to short the design cycle and to enhance product quality. Significant research activity has occurred in the area of structural optimization in the last decade. Especially for topology optimization of structure, many new theoretical, algorithmic, and computational contributions have resulted by researchers and engineers. Topology optimization is a powerful tool for global and multi-scale design of macrostructures, microstructures, and the cell of prescribed composite materials. The population based evolutionary algorithms have emerged as powerful mechanism for finding optimum solutions of complex optimization problems in engineering during the last two decades. Evolutionary computation is the study of computational systems which use ideas and get inspiration from natural evolution and adaptation [1]. The thinking has wide application in various engineering fields, such as computer science, artificial intelligence, operations research. Genetic algorithm is another kind of bio-inspired optimization method and it is playing an increasingly important role in studies of complex adaptive systems. Its application ranges from adaptive agents in economic theory to the use of machine learning techniques in the design of complex devices and structures, such as aircraft turbines and integrated circuits [2]. Optimization of structures can be classified into three categories: sizing, shaping, and topology optimization. In the topology optimization, it is concerned with the structure members and connectivity between members. In general, it is easily represented by discrete variables rather than by those used for continuous optimization problems. Topology optimization is the most difficult and complex among three categories and it is special useful in developing innovative conceptual designs. Structural optimization, in particular the topology optimization, has been identified as one of the most challenging tasks in structural design. Various techniques and approaches have been established during the last two decades. Topology optimization usually referred to as layout optimization or general shape optimization [3]. It lets engineers get the optimal topology of structure or new configurations during product design phase, as they are implementing the design of the size

This paper will give a short survey about topology optimization of structures. It is particularly focused on topological shape optimization of structures using level-set methods, including the level-set based standard methods and the level-set based alternative methods. The former often directly solve the Hamilton-Jacobi partial differential equation (H-J PDE) to obtain the boundary velocity field using Finite Differential Methods (FDM), and the later commonly employ parametric or equivalent methods to evaluate the velocity field without directly solving the H-J PDE. The unique characteristics of the level-set based topology optimization methods are discussed, and a future perspective and prospects in this research area is also included. A benchmark numerical example is used to showcase the effectiveness of the level-set based methods.

A new fuzzy strategy for size and topology optimization of truss structures

The boom structure is a key component of giant boom cranes, and the stability-ensured topology optimization is critical to its lightweight design. The finite difference method, direct differentiation or adjoint method needs many time-consuming nonlinear analyses for this problem with a large number of design variables and constraints, and the last two methods are difficult to implement in off-the-shelf softwares. To overcome these challenges, this work first defines a global stability index to measure the global stability of the whole structure, and a compression member stability index to identify the buckling of compression members. Numerical and experimental verifications of these two stability indices are conducted by analyzing a simple three-dimensional frame. Next, the anti-buckling mechanism of boom structures is analyzed to develop the precedence order of freezing relative web members. The stability indices and the freezing measure are then utilized as a part of a novel Stability-Ensured Soft Kill Option (SSKO) algorithm, built upon the existing Soft Kill Option (SKO) method. The objective is to minimize the discrepancy between structural volume and predetermined target volume, while the global stability and stress are regarded as constraints. Lastly, the SSKO algorithm with different scenarios is applied to topology optimization problems of four-section frames and a ring crane boom; in both cases the consistent and stable topologies exhibit applicability of the proposed algorithm.

Nowadays, along with network development, due to the threats of unknown sources, information communication is more vulnerable, and thus, more secured information is required. Intrusion Detection System (IDS) is very important for cybersecurity with the presence in particular of various networked computers' foundation. An efficient IDS apply machine learning method as computational technics to increase rates of detection to gain the high accuracy and low false alarms rate within the huge amounts of data. To increase the rate of detection, researcher usually implements the optimizer. Thus, in this research, a comprehensive experimental study is presented based on various binary to optimize the rate of detection and decrease the error. Moreover, Numerous researches have been conducted about intrusion detection systems with the old dataset such as Kddcup'99 dataset, and due to this reason, most of them did not get the potential accuracy to detect intrusion with the current intrusion as the old dataset is not covering the current attacks. Therefore, this research aims to A hybrid Anomaly Classification of IDS with Deep Learning (DL) and Binary Algorithms (BA) as Optimizer with the most updated dataset named "CICIDS2017" which can be used for the intrusion detection evaluation. Moreover, this research conducts the anomaly classification of IDS based on the deep neural network (DNN) as the Deep Learning (DL) platform and Binary Algorithms (BA) in terms of Binary Bat Algorithm (BBA), Binary Genetic Algorithm (BGA), Binary Gravitational Search Algorithm (BGSA) as optimizer to enhance the rates of detection. Some of the results which had been considered and achieved for DNN and the hybrid version (DNN and Binary Algorithms) are in terms of: Accuracy, Recall, Precision, Confusion Matrix, Sensitivity, Specificity, and Cost Error.

In this article, a novel hybrid binary bat algorithm named HBBA is proposed for global optimization problems. First, to avoid simultaneous updating of bat velocity's dimensional components, i.e., elements of velocity vector, a random black hole model is modified to adapt to binary algorithm for updating in unknown spaces for each dimensional component individually. Through this way, the search ability of bats around the current group best is increased greatly. Second, a time-varying v-shaped transfer function, rather than a time-invariant one as in closely related works, is proposed to map velocity in continuous search space to a binary one. This accelerates the speed to switch individuals' positions, i.e., solutions in binary space. Third, a chaotic map is utilized to replace monotonous parameters in original binary bat algorithm, which is beneficial for avoiding premature convergence. Simulation results demonstrate the effectiveness of the proposed algorithm by three types of benchmark functions and unit commitment problem.

In this research, a reliability based topology optimization (RBTO) for structural design methodology using the Hybrid Cellular Automata (HCA) method is proposed. More speciflcally, a decoupled reliability based design optimization (RBDO) approach is utilized, so that the topology optimization is separate from the reliability analysis. In this paper, a maximum allowable displacement failure mode is considered. In this methodology, starting from a continuum design space of uniform material distribution and initial uncertain variable values, a deterministic topology optimization is followed by a reliability assessment of the resulting structure to determine the most probable point of failure (MPP) for the current structure. The MPP is determined with respect to the maximum allowable de∞ection of the structure when loaded. This is generally a computationally expensive process using traditional techniques due to the large number of design variables associated with topology optimization problem. However, combining the e‐cient methods of the non-gradient HCA algorithm with the decoupled approach for RBDO aims to reduce this burden. The topology optimization was without constraint in previous applications of the HCA method. To accommodate RTBO, a mechanism for a global constraint for maximum allowable displacement is developed. This paper details the methodology for the six-sigma design of structures using topology optimization.

According to the requirements of the aerospace industry for high strength, high stiffness, and lightweight structural parts, topology optimization has been proved to be an effective product design method. As one of the most conceptual and prospective structural optimization design methods, topology optimization intends to seek the optimal layout of materials in an allowed design region under a given load and boundary conditions. Thus, the object of study in the article is the method of topological optimization of aircraft structures. The goal of this article is to analyze the existing approaches, algorithms, as well as application of the method of topological optimization in the aerospace field in applied problems. The tasks are to describe the existing various approaches methods, features, and research directions of topological optimization as well as to study the possibility of application in the manufacturing process of composite structures. The following results were obtained. The optimization methods are briefly explained and compared, and the advantages and limitations of each approach are discussed. The various ways of simultaneous optimization of fiber orientation and structural topology were described and analyzed. The features of different methods of continuous fiber orientation optimization method were reviewed. The discrete fiber orientation optimization methods were represented. The possibility of multi-scale concurrent topological optimization was described. The combination of topology optimization and additive manufacturing was considered. Finally, the topology optimization of FRC structures which have been resolved in literature are reviewed and the potential research fields requiring more investigation are pointed out. Conclusions. In the article, a comprehensive review of the topology optimization design of FRC structures was presented. The promising way is to combine topology optimization with additive manufacturing techniques. However, these proposed methods may not suitable for other more complex problems, such as bucking stability and natural frequency. Hence, the topology optimization design of complex FRC components under complicated conditions is the main challenge in the future. This can be a new trend in the topology design of FRC structures.

This thesis aims at understanding and improving topology optimization techniques focusing on density-based level-set methods and geometrical nonlinearities. Central in this work are the numerical modeling of the mechanical response of a design and the consistency of the optimization process itself. Concerning the first topic, we investigate different means to improve the robustness of density-based numerical models including geometrical nonlinearities. The conventional approach (scaling the local material properties) can result in convergence problems due to excessive deformation in low-stiffness finite elements. To avoid excessive deformation, we combine the element connectivity parameterization method (adapting the connectivity between finite elements) with level-set-based topology optimization. Furthermore, we achieve greater robustness of analysis method using a second and improved approach called element deformation scaling. This approach eliminates the need for solving internal equilibrium equations (needed for the element connectivity parameterization method) via an explicit relation between the local internal and global external displacement field. The second focus of this thesis is on the optimization process of level-set-based topology optimization, and in particular its numerical consistency. We observe that signed-distance reinitialization of the level-set function affects the shape of a design in the optimization process. To minimize this effect, we propose a discrete level-set method that is based on an approximate Heaviside function and focusing on the implementation. Furthermore, we also propose a level-set-based topology optimization method using an exact Heaviside function and mathematical programming that effectively eliminates the need for reinitialization. We demonstrate that our density-based level-set method is closely related to conventional density-based topology optimization methods, while offering the advantage of more control over the geometrical complexity. On the other hand, we confirm that the dependence of the final result on the initial design which remains one of the big challenges for level-set-based topology optimization. The potential of the proposed level-set method is shown by applying it on problems with stress constraints and geometrical nonlinearities and performing manufacturing tolerant topology optimization. Finally, this thesis offers a review of level-set methods for structural topology optimization to identify and discuss the different approaches that are available in literature. We can distinguish between level-set methods by examination of their design parameterization, sensitivities, update procedures and regularization techniques. A level-set-based design parameterization offers the advantage of a crisp distinction between subdomains. For this reason, X-FEM approaches and conforming discretizations are an interesting option to retain the crisp nature of the level-set-based description of the design. Many level-set methods are combined with density-based numerical models and are, therefore, closely related to conventional density-based topology optimization methods. In particular, recently proposed projection methods have much in common with a level-set-based design description. The results of level-set-based TO methods often rely heavily on regularization techniques that introduce inconsistencies in the optimization process. Numerical consistency does not necessarily lead to the best search direction, but is essential to find a Karush-Kuhn-Tucker point of the discretized optimization problem.

This article proposes an efficient parameterized level set method (PLSM) for structural topology optimization design with minimum compliance as the objective function and volume fraction as the constraint condition. In the stage of establishing the optimization model, the level set function (LSF) is interpolated using compactly-supported radial basis functions (CS-RBFs) to transform the Hamilton-Jacobi partial differential equation (PDE) into ordinary differential equations (ODEs), thereby making the evolution of the LSF more convenient and efficient, and ensuring the smoothness of the optimization result boundary. The method of moving asymptotes (MMA) is used for solving the established optimization model, and meanwhile the shape sensitivity constraint factor is added to improve computational efficiency. During the evolution of the LSF, an approximate re-initialization scheme is employed to prevent the gradient of the LSF boundary from being too large or too small, thereby improving the numerical stability and the convergence speed of structural topology optimization process. Furthermore, the proposed method is also extensible and applicable to topology optimization of multi-material structures. The feasibility and effectiveness of this method have been verified through several typical numerical examples involving topology optimization of single-material structures and multi-material structures within the framework of minimum compliance design. HIGHLIGHTS An efficient parameterized level set method using the approximate re-initialization scheme is proposed for structural topology optimization. The approximate re-initialization scheme is employed when solving the parameterized level set function via the MMA algorithm. This scheme can prevents the gradient of the level set function boundary from being too large or too small, making the level set function update more stable and accelerating the convergence speed of structural topology optimization. The effectiveness and feasibility of the proposed method are demonstrated through examples of single-material and multi-material structural topology optimization.