- Research Article
- 10.2464/jilm.54.361
くさび形工具によるアルミニウム円板の切断加エシミュレーション
- Jan 01, 2004
- Journal of Japan Institute of Light Metals
- Nobuo Hatanaka + 4 more +4
Cutting of the circular aluminum sheets (1100P-H14, 1100P-O) by indentation of wedge shape punches was investigated as a process to achieve burr-free-cutting. Numerical simulations of the cutting process were conducted using a rigid plastic finite element code developed by the authors. The Jeong expression is used as a fracture criterion and was linked with the simulation. Metal flow and mean normal stress distributions at the deformation region of the sheet were calculated. The effects of nose angle and radius of the wedge shape punch on the cut edge profile are discussed based on the calculated results. To confirm the results of the finite element simulations, cutting experiments were also carried out. Cutting force with punch penetration depth was measured. And the shape of the cut edge was observed using an optical microscope. These experimental results can be explained well by the simulation results. From simulational and experimental results, it was clarified that the cutting process of the circular aluminum sheets of the burr-free was possible with wedge shape punch.
Read more