Sub-hectare resolution forest biomass mapping from Copernicus DEM with low-dimensional models

The Global Digital Elevation Model produced from stereo images of Advanced Spaceborne Thermal Emission and Reflection Radiometer data (ASTER GDEM) covers land surfaces between latitudes of 83°N and 83°S. The Phased Array type L-band Synthetic Aperture Radar (PALSAR) onboard Advanced Land Observing Satellite (ALOS) collected many SAR images since it was launched on 24 January 2006. The combination of ALOS/PALSAR interferometric data and ASTER GDEM should provide the penetration depth of SAR data assuming ASTER GDEM was the elevation of vegetation canopy top. It would be correlated with forest biomass because penetration depth could be affected by forest density and forest canopy height. Their combination held great promises for the forest biomass mapping over large area. The feasibility of forest biomass mapping through the data synthesis of ALOS/PALSAR InSAR data and ASTER GDEM was investigated in this study. A procedure for the extraction of penetration depth was firstly proposed. Then three models were built for biomass estimation: (I) model only using backscattering coefficients of ALOS/PALSAR data; (II) model only using penetration depth; (III) model using both of them. The biomass estimated from Lidar data was taken as reference data to evaluate the three different models. The results showed that the combination of backscattering coefficients and penetration depth gave the best accuracy. The forest disturbance has to be considered in forest biomass estimation because of the long time span of ASTER data for generating ASTER GDEM. The spatial homogeneity could be used to improve estimation accuracy.

Surplus forest biomass – The cost of utilisation through optimised logistics and fuel upgrading in northern Sweden

A combined Position-Reflectometry Galileo receiver on board a low cost unmanned aerial platform (UAV) was developed in the framework of the Combined Positioning-Reflectometry Galileo Code Receiver for Forest Management project (COREGAL) with the main aims of evaluating the accurate positioning in areas where no GNSS ground infrastructures are available and of investigating the forest biomass mapping. In this context, the Soil and Vegetation Reflection Simulator (SAVERS) was employed to simulate GNSS-R data in order to analyze the GNSS-R sensitivity to biomass, to create a Look Up Table (LUT) of GNSS-R reflectivity and to carry out a biomass retrieval test. SAVERS simulated the mean power of the reflected GNSS-R signals by applying the integral bistatic equation taking into account the scattering contributions from soil and vegetation. It was shown that the GNSS-R sensitivity to forest biomass can be enhanced by filtering out the incoherent component of the signal, i.e. by using a long coherent integration time. A LUT was created by running SAVERS for a realistic range of the input parameters. Moreover, a GNSS-R synthetic dataset was generated for the case of a cork oak open forest in Portugal and a retrieval test was carried out. A neural network with two hidden layers was trained on the LUT and the forest biomass was estimated from the synthetic data. The biomass mean retrieval error was approximately 10 t/ha.

Forests are one of the key elements in ecological transition policies in Europe. Sustainable forest management is needed in order to optimise wood harvesting, while preserving carbon storage, biodiversity and other ecological functions. Forest managers and public bodies need improved and cost-effective forest monitoring tools. Research studies have been carried out to assess the use of optical and radar images for producing forest height or biomass maps. The main limitations are the quantity, quality and representativeness of the reference data for model training. The Global Ecosystem Dynamics Investigation (GEDI) mission (full waveform LiDAR on board the International Space Station) has provided an unprecedented number of forest canopy height samples from 2019. These samples could be used to improve reference datasets. This paper aims to present and validate a method for estimating forest dominant height from open access optical and radar satellite images (Sentinel-1, Sentinel-2 and ALOS-2 PALSAR-2), and then to assess the use of GEDI samples to replace field height measurements in model calibration. Our approach combines satellite image features and dominant height measurements, or GEDI metrics, in a Support Vector Machine regression algorithm, with a feature selection process. The method is tested on mixed uneven-aged broadleaved and coniferous forests in France. Using dominant height measurements for model training, the cross-validation shows 7.3 to 11.6% relative Root Mean Square Error (RMSE) depending on the forest class. When using GEDI height metrics instead of field measurements for model training, errors increase to 12.8–16.7% relative RMSE. This level of error remains satisfactory; the use of GEDI could allow the production of dominant height maps on large areas with better sample representativeness. Future work will focus on confirming these results on new study sites, improving the filtering and processing of GEDI data, and producing height maps at regional or national scale. The resulting maps will help forest managers and public bodies to optimise forest resource inventories, as well as allow scientists to integrate these cartographic data into climate models.

Northern forests are an important carbon sink, but our understanding of the driving factors is limited due to discrepancies between dynamic global vegetation models (DGVMs) and atmospheric inversions. We show that DGVMs simulate a 50% lower sink (1.1 ± 0.5 PgC yr−1 over 2001–2021) across North America, Europe, Russia, and China compared to atmospheric inversions (2.2 ± 0.6 PgC yr−1). We explain why DGVMs underestimate the carbon sink by considering how they represent disturbance processes, specifically the overestimation of fire emissions, and the lack of robust forest demography resulting in lower forest regrowth rates than observed. We reconcile net sink estimates by using alternative disturbance-related fluxes. We estimate carbon uptake through forest regrowth by combining satellite-derived forest age and biomass maps. We calculate a regrowth flux of 1.1 ± 0.1 PgC yr−1, and combine this with satellite-derived estimates of fire emissions (0.4 ± 0.1 PgC yr−1), land-use change emissions from bookkeeping models (0.9 ± 0.2 PgC yr−1), and the DGVM-estimated sink from CO2 fertilisation, nitrogen deposition, and climate change (2.2 ± 0.9 PgC yr−1). The resulting ‘bottom-up’ net flux of 2.1 ± 0.9 PgC yr−1 agrees with atmospheric inversions. The reconciliation holds at regional scales, increasing confidence in our results.

Medium spatial resolution biomass is a crucial link from the plot to regional and global scales. Although remote-sensing data-based methods have become a primary approach in estimating forest above ground biomass (AGB), many difficulties remain in data resources and prediction approaches. Each kind of sensor type and prediction method has its own merits and limitations. To select the proper estimation algorithm and remote-sensing data source, several forest AGB models were developed using different remote-sensing data sources (Geoscience Laser Altimeter System (GLAS) data and Thematic Mapper (TM) data) and 108 field measurements. Three modeling methods (stepwise regression (SR), support vector regression (SVR) and random forest (RF)) were used to estimate forest AGB over the Daxing’anling Mountains in northeastern China. The results of models using different datasets and three approaches were compared. The random forest AGB model using Landsat5/TM as input data was shown the acceptable modeling accuracy (R2 = 0.95 RMSE = 17.73 Mg/ha) and it was also shown to estimate AGB reliably by cross validation (R2 = 0.71 RMSE = 39.60 Mg/ha). The results also indicated that adding GLAS data significantly improved AGB predictions for the SVR and SR AGB models. In the case of the RF AGB models, including GLAS data no longer led to significant improvement. Finally, a forest biomass map with spatial resolution of 30 m over the Daxing'anling Mountains was generated using the obtained optimal model.

AIRSAR data gathered in winter, spring, and summer over the Bonanza Creek Experimental Forest, near Fairbanks, Alaska are compared to estimates of whole-tree aboveground dry biomass from 21 forest stands and 2 clear-cuts. Using empirical relationships, biomass values are predicted from the radar at various frequencies and polarizations and compared to actual biomass values. Predicted biomass levels are most accurate at P-band. At that frequency, the radar discriminates 7 biomass levels, up to the maximum observable biomass level for these forests, with 18% error. Within these 7 biomass levels data dispersion is large because of significant inner-stand spatial variations in biomass, interactions of the radar signals with a spatially varying three-dimensional structure of the canopy, as well as uncertainties associated with the estimation of stand biomass from empirical equations. Multiple incidence angle data also reveal that the incidence angle /spl theta//sub i/ of the radar illumination affects the retrieval of biomass from the radar data even at HV-polarization when /spl theta//sub i/>50/spl deg/ or /spl theta//sub i/ >

An approach to estimating forest biomass while quantifying estimate uncertainty and correcting bias in machine learning maps

Use of local and global maps of forest canopy height and aboveground biomass to enhance local estimates of biomass in miombo woodlands in Tanzania

Accurate estimates of biomass in urban forests can help improve strategies for enhancing ecosystem services. Landscape heterogeneity, such as land-cover types and their spatial arrangements, greatly affects biomass growth, and it complicates the estimation of biomass. Application of LiDAR data is a typical approach for mapping forest biomass and carbon stocks across heterogeneous landscapes. However, little is known about how urban land uses and pattern impact biomass and estimates derived from LiDAR analysis. In this study, we examined the relationship between LiDAR-derived biomass and dominant land-cover types using field-measured estimates of aboveground forest biomass in an urbanized region of North Carolina, USA. Three objectives drove this research: 1) we examined the local effects of dominant land cover types on urban forest biomass; 2) we identified the spatial scale at which dominant land cover influences biomass estimates; 3) we investigated whether the fine-scale, spatial heterogeneity of the urban landscape contributed to forest biomass. We used multiple linear regression to relate field-measured biomass to LiDAR metrics and land cover densities derived from Landsat and LiDAR data. The biomass model developed from variables derived from LiDAR first returns produced biomass estimates similar to using all LiDAR returns. Although three land-cover types (impervious surface, managed clearings, and farmland) exhibited a negative relationship with biomass, only impervious surface was statistically significant. The biomass model that used impervious surface densities between 100 m and 175 m radial buffers produced the highest adjusted R2 with lower RMSE values. Our study suggests that impervious surface impacted forest biomass estimates considerably in urbanizing landscapes with the greatest effect between 100 and 175 m from a forest stand. Managed clearing and farmland types negatively impacted biomass estimation albeit not as strongly as impervious surface. Overall, we found that accounting for impervious surface density and its proximity to forest in biomass models may improve urban forest biomass estimates.

A method has been developed to map forest biomass with Landsat TM and ETM imagery coupled with forest inventory data. The method involves applying an unsupervised classification to a Landsat TM/ETM scene. The unsupervised clusters are labelled according to cover types and forest structure (crown closure and height) using random samples extracted from Inventory datasets as training pixels. Biomass values are assigned to the clusters according to the dominant forest type and structure contained within the clusters. The method was tested on five pilot regions throughout Canada with an objective of evaluating its application in several ecological regions with different species composition and stand structure. This paper concerns (1) the implementation of this method and (2) the comparison of those results between regions. The overall results for classifying forest cover types range from 50 to 60% for the five regions. Correlations between remotely sensed and inventory biomass estimates are variable for different species and pilot regions. However, results show that the method provides a complement to existing inventory-based methods for mapping biomass in managed areas and may constitute an alternative approach for northern areas with weak forest inventory databases.

Accurate mapping of aboveground biomass in tropical peatland forests remains challenging due to the complexity of vegetation structure, hydrological regimes, and data heterogeneity across sensors. This review synthesizes multi‑sensor remote sensing and machine‑learning approaches for aboveground biomass estimation in Vietnam’s Melaleuca wetlands, aiming to establish a standardized framework of terminology, metrics, and environmental covariates for future research and applications. By harmonizing key indicators such as canopy height, texture, soil-hydro-geomorphological variables, and validation metrics (R², RMSE), the framework enhances reproducibility, comparability, and data integration across scales. The study further consolidates a practical roadmap encompassing data acquisition, feature engineering, modeling, and validation stages - culminating in uncertainty‑aware biomass mapping that bridges research and operational implementation. Beyond synthesizing existing studies, this work provides actionable guidance for open‑access workflows and policy‑oriented applications in carbon accounting and wetland restoration. The proposed standardized approach thus supports both scientific and managerial communities in advancing sustainable management of Vietnam’s Melaleuca peat ecosystems and will help standardize future aboveground biomass mapping across Southeast Asian wetlands.

Biomass estimation from simulated GEDI, ICESat-2 and NISAR across environmental gradients in Sonoma County, California

Accurate mapping of above-ground biomass (AGB) is essential for carbon stock quantification and climate change impact assessment, particularly in mountainous areas. This study applies a random forest (RF) regression model to predict the spatial distribution of AGB in Usho (site A) and Utror (site B) forests located in the northern mountainous region of Pakistan. The predicted maps elucidate AGB variations across these sites, with non-forest areas excluded based on an normalized difference vegetation index (NDVI) threshold value of <0.4. Three different combinations of input datasets were used to predict the biomass, including spectral bands (SBs) only, vegetation indexes (VIs) only, and a combination of both spectral bands and vegetation indexes (SBVIs). Utilizing SBs, the biomass ranged between 150 and 286 mg/ha in site A and 99 and 376 mg/ha in site B. Meanwhile, using VIs indicated a biomass range of 163 Mg/ha–337 Mg/ha and 131–392 Mg/ha for sites A and B, respectively. The combination of spectral bands and vegetation indexes yielded AGB values of 145–290 Mg/ha in site A and 116–389 Mg/ha in site B. The northern and western regions of site A, characterized by higher altitudes and lower forest density, notably showed lower biomass values than other regions. Conversely, similar regions in site B, situated at lower latitudes, demonstrated different biomass ranges. The RF model exhibited robust accuracy, with R2 values of 0.74 and 0.83 for spectral bands and vegetation indexes, respectively. However, with a combination of both, an R2 of 0.79 was achieved. Furthermore, altitudinal gradients significantly influence the biomass distribution across both sites, with specific elevation ranges yielding optimal results. The AGB variation along the slope further corroborated these findings. In both sites, the western aspects showed the highest biomass across all combinations of input datasets. The variable importance analysis highlighted that ARVI8a, NDI45, Band12, Band11, TSAVI8, and ARVI8a are significant predictors in sites A and B. This comprehensive analysis enhances our understanding of AGB distribution in the mountainous forests of Pakistan, offering valuable insights for forest management and ecological studies.

Predicting and mapping mangrove biomass from canopy grain analysis using Fourier-based textural ordination of IKONOS images