Support vector machine regression model of CBM content and application

Modeling the behavior of groundwater levels is necessary to implement sustainable groundwater resource management. Groundwater is a non-linear and complex system, which can be modeled by data-driven models. This study evaluates the performances of data-driven models, support vector machine regression (SVR) and artificial neural network (ANN), for forecasting groundwater levels of confined and unconfined systems at 1-, 2-, and 3-month ahead. This is the first time that confined and unconfined aquifers have been compared using data-driven models. In addition, to identify the optimal input combination, a hybrid gamma test (GT) and genetic algorithm (GA) was used. The coefficient of correlation (R), Mean Absolute Error (MAE), root mean squared error (RMSE), Nash–Sutcliffe efficiency (NSE), and developed discrepancy ratio (DDR) were applied to evaluate the SVR and ANN models. Results showed that the SVR and ANN models were more accurate for the unconfined system than the confined system for forecasts up to 3-month ahead. In both hydrogeological systems for 1-month ahead, the models performed better than for 2- and 3-month ahead forecasts, and the accuracy of the models decreased as the months ahead increased. The SVR model performed better than the ANN model for 1-, 2-, and 3-month ahead groundwater-level forecasting. The SVR model could be successfully used in predicting monthly groundwater in confined and unconfined systems.

Application of robust principal component analysis–multivariate adaptive regression splines for the determination of °API gravity in crude oil samples using ATR-FTIR spectroscopy

Gas–solid fluidized beds are complex particle systems, and the electrostatic behavior of particles in fluidized beds is even more complex, which is influenced by numerous factors such as particle properties and operating conditions. Current studies focus on the effect of a certain factor on particle charging without a global picture. Furthermore, there is no mathematical model that can describe the interaction of multiple factors on particle charging because it is difficult to build a model for such a complex system. Therefore, a new approach is needed. In this study, a model capable of accurately predicting the surface charge density of particles in monodispersed gas–solid fluidized beds within a certain range was developed based on the literature and experimental data through several machine learning methods including kernel ridge regression (KRR), support vector machine regression (SVR), and multilayer perceptron (MLP). SVR and MLP models gave the best results with R2 equal to 0.980 and 0.979, respectively. However, the sensitivity analysis showed that the MLP model was more reliable than the SVR model. In conclusion, the feasibility of using machine learning to analyze the charging behavior of particles in fluidized beds is demonstrated, and the proposed MLP model can serve as an accurate correlative tool for fast and effective estimation of particle surface charge density in gas–solid fluidized beds.

Driving Decision-making Mechanism (DDM) is identified as the key technology to ensure the driving safety of autonomous vehicle, which is mainly influenced by vehicle states and road conditions. However, previous studies have seldom considered road conditions and their coupled effects on driving decisions. Therefore, road conditions are introduced into DDM in this paper, and are based on a Support Vector Machine Regression (SVR) model, which is optimized by a weighted hybrid kernel function and a Particle Swarm Optimization (PSO) algorithm, this study designs a DDM for autonomous vehicle. Then, the SVR model with RBF (Radial Basis Function) kernel function and BP (Back Propagation) neural network model are tested to validate the accuracy of the optimized SVR model. The results show that the optimized SVR model has the best performance than other two models. Finally, the effects of road conditions on driving decisions are analyzed quantitatively by comparing the reasoning results of DDM with different reference index combinations, and by the sensitivity analysis of DDM with added road conditions. The results demonstrate the significant improvement in the performance of DDM with added road conditions. It also shows that road conditions have the greatest influence on driving decisions at low traffic density, among those, the most influential is road visibility, then followed by adhesion coefficient, road curvature and road slope, while at high traffic density, they have almost no influence on driving decisions.

Empirical approach for strength prediction of geopolymer stabilized clayey soil using support vector machines

Support vector machine regression (SVR) technique was used for predicting the uniaxial compressive strength of FRP confined concrete. Two different SVR models, viz. SVR model for carbon fiber reinforced polymer confined concrete and SVR model for glass fiber reinforced polymer confined concrete, were developed. The prediction efficacy of developed SVR models was compared with that of ANN and existing empirical FRP strength prediction models. Furthermore, for assessing variable contributions in strength prediction process, a sensitivity analysis is also presented. The study showed that SVR could be a powerful alternative physical tool for strength prediction of FRP confined concrete.

Development of a screening method for adulteration detection in coconut milk via mid-infrared spectroscopy: A study of linear and nonlinear regression method

The South Yanchuan block is the deepest developed high-rank coalbed methane (CBM) field in China, the geological conditions in this block are complex and the main controlling factors of CBM content are various. Thus, a decision-making model of the potential of deep high-rank coalbed methane resource based on geographical information system (GIS) and weighted linear combination (WLC) is established, the influence of geological conditions on CBM content is analyzed, the favorable areas of CBM potential are divided. Results show that the buried depth, coal rank and hydrodynamic condition in the coal seam are dominant factors that control the gas content on a block scale, while the gas content has a weak correlation with maceral composition, coal thickness and the effective thickness of the overlying strata. The study area is divided into five units according to the natural breaks method, i.e., the extramely favourable area, the favourable area, the relatively favourable area, the normally favourable area and the unfavourable area, which account for 14.23%, 22.23%, 24.77%, 25.08% and 13.70% in area, respectively. The extramely favourable area is located in the northwestern of the South Yanchuan block, which is considered to be the key exploration and development area. The study will deepen the understanding of the control of CBM potential in south Yanchuan Block, and is of practical significance for CBM recovery in this area.

This study aimed to compare stepwise multiple linear regression (SMLR), partial least squares regression (PLSR) and support vector machine regression (SVMR) for estimating soil total nitrogen (TN) contents with laboratory visible/near-infrared reflectance (Vis/NIR) of selected coarse and heterogeneous soils. Moreover, the effects of the first (1st) vs. second (2nd) derivative of spectral reflectance and the importance wavelengths were explored. The TN contents and the Vis/NIR were measured in the laboratory. Several methods were employed for Vis/NIR data pre-processing. The SMLR, PLSR and SVMR models were calibrated and validated using independent datasets. Results showed that the SVMR and the PLSR models had similar performances, and better performances than the SMLR. The spectral bands near 1450, 1850, 2250, 2330 and 2430 nm in the PLSR model were important wavelengths. In addition, the 1st derivative was more appropriate than the 2nd derivative for spectral data pre-processing. PLSR was the most suitable method for estimating TN contents in this study. SVMR may be a promising technique, and its potential needs to be further explored. Moreover, the future studies using outdoor and airborne/satellite hyperspectral data for estimating TN content are necessary for testing the findings.

In order to predict gas content of coal seam accurately in binchang mining, we use core data to build the BP neural network. We select the important controlling factors which impacted gas content of coal seam, coal bed thickness, ash and max vitrinite reflectance as the basic features of the BP neural network model, and establish the BP neural network prediction model between coal bed methane content and the main controlling factors. The testing results show that the BP neural network model could truly reflect the non-linear relationship between the gas content and the controlling factors, and obtain minimal error between the predicted results and the measured ones. This method provides the probability for using geological, logging and seismic information to predict gas content of coal seam.

Choosing appropriate multivariate calibration and preprocessing transformation techniques is important in the determination of soil organic carbon (SOC) content based on visible and near-infrared (Vis–NIR) spectroscopy. The performance levels of partial least-squares regression (PLSR), support vector machine regression (SVMR), and wavelet neural network (WNN) calibration methods coupled with different preprocessing approaches were compared using three kinds of criteria, including the coefficient of determination (R2), root mean square error (RMSE), and residual prediction deviation (RPD). A total of 328 soil samples collected from the south bank of Hangzhou Bay were used as the dataset for the calibration–validation procedure and SOC content inversion. The effects of spectra preprocessing transformation methods were evaluated for raw spectra, Savitzky–Golay smoothing with the first derivatives of reflectance (FDR) and Savitzky–Golay smoothing with logarithm of reciprocal of the reflectance (log R−1). The results indicate that the SVMR is superior to the PLSR, and WNN models for SOC content prediction. The combination of the SVMR model with FDR provided the best prediction results for the SOC content, with R2p = 0.92, RPDP = 2.82, RMSEP = 0.36%, and a kappa correlation coefficient of interpolation as high as 0.97. The FDR of Vis–NIR spectroscopy combined with the SVMR model is recommended over the PLSR and WNN modeling techniques for the high-accuracy determination of the SOC content.

Towards an effective cross-task mental workload recognition model using electroencephalography based on feature selection and support vector machine regression

The monitoring and replacement of lubricating oil has an important impact on mechanical equipment. In this study, based on the infrared spectroscopy monitoring method, an acid value index prediction model is established. The support vector machine regression method is used to quantitatively analyze the acid number of the oil sample, which verifies the stability and predictive ability of the quantitative prediction model, and we provide a theoretical basis and practical examples for the online monitoring of oil indicators. In addition, a support vector machine regression model is established by observing the changing law of the spectral absorption peak and selecting the dominant wavelength, and it is compared against the prediction algorithm of the long- and short-term memory network. By comparing the deviation relationship between the predicted value and the real chemical value, the feasibility of the infrared spectroscopy prediction model is verified. The experimental results show that the correlation coefficient between the predicted value of the model and the actual measured value reaches 0.98. This proves that the prediction effect of the prediction model based on the infrared spectrum data and the support vector machine regression method is better than that of the long- and short-term memory network trend prediction model, and the predicted results are reliable.

This paper integrated superiority from time series model and least square support vector machine regression model with data aggregation for traffic speed short term forecasting. Based on the results of traffic data variations analysis, the practicability that speed data can be aggregated to several periods was confirmed, and aggregated model can be developed to forecast the speed with auto regression (AR) model and support vector machine regression (SVR). Then the speed data in case study were integrated to 4 periods at the location of Remote Traffic Microwave Sensors (RTMS) 2047 on 2nd Ring Road Expressway in Beijing. Arguments with coefficients from AR models then act as the independent variables of LSSVR in aggregated model. Short term traffic speed was predicted by aggregated model, and the results indicated that taking advantages of time periods variation rule inside the aggregated model would help save the model running time cost under the premise of accuracy with better prediction ability than LSSVR in certain conditions.

The development of compounds that selectively modulate thyroid hormone action by serving as subtype-selective ligands of the thyroid hormone receptors (TRs) would be useful for clinical therapy. In the present work, quantitative structure-activity relationship (QSAR) models by adopting molecular descriptors to predict the TR binding activity were established based on a data set of TR ligands. The linear (multiple linear regression (MLR) and partial least squares regression (PLSR)) and nonlinear (support vector machine regression (SVR)) methods were employed to investigate the relationship between structural properties and binding activities. The proposed PLSR model was slightly superior to the MLR model and SVR model, as indicated by the reasonable statistical properties (TRβ: Rtr2 = 0.9594, Qte2 = 0.8091. TRα: Rtr2 = 0.9705, Qte2 = 0.8057). Additionally, molecular docking simulations were also performed to study the probable binding modes of the ligands and the TR subtype selectivity. The results indicate that substituents located in region A, region B, and region C and the orientation of these groups might result in the subtype selectivity based on the hydrogen bonding and electrostatic interactions. The derived QSAR models together with the molecular docking results have good potential in facilitating the discovery of novel TR ligands with improved activity and subtype selectivity.