- Supplementary Content
16
- 10.1016/j.matt.2021.05.020
1D topological systems for next-generation electronics
- Aug 01, 2021
- Matter
- Hyeuk Jin Han + 2 more +2
1D topological systems for next-generation electronics
Protected surface states arising from non-trivial bandstructure topology in semimetals can potentially enable advanced device functionalities in compute, memory, interconnect, sensing, and communication. This necessitates a fundamental understanding of surface-state transport in nanoscale topological semimetals. Here, we investigate quantum transport in a prototypical topological semimetal NbAs to evaluate the potential of this class of materials for beyond-Cu interconnects in highly-scaled integrated circuits. Using density functional theory (DFT) coupled with non-equilibrium Green’s function (NEGF) calculations, we show that the resistance-area RA product in NbAs films decreases with decreasing thickness at the nanometer scale, in contrast to a nearly constant RA product in ideal Cu films. This anomalous scaling originates from the disproportionately large number of surface conduction states which dominate the ballistic conductance by up to 70% in NbAs thin films. We also show that this favorable RA scaling persists even in the presence of surface defects, in contrast to RA sharply increasing with reducing thickness for films of conventional metals, such as Cu, in the presence of surface defects. These results underscore the potential of topological semimetals as future back-end-of-line (BEOL) interconnect metals.
Loading PDF
1D topological systems for next-generation electronics
1D topological systems for next-generation electronics
ELECTRONIC STRUCTURES AND TRANSPORT PROPERTIES OF SINGLE CRYSTALLINE GaN NANOTUBES
The electronic structures and transport properties of single crystalline GaN nanotubes with 0.92 nm inner diameter and different wall thicknesses of 0.08 nm, 0.26 nm and 0.54 nm are studied based on the generalized gradient approximation (GGA) of density functional theory (DFT) and the nonequilibrium green's function (NEGF). The research shows that (1) the three single crystalline GaN nanotubes have direct band gaps, decreasing with the increase of wall thickness; (2) the electronic density of state and electronic transmission spectra of two-probe system have their own pulse-type sharp peaks with almost the same location of electron energy; (3) under different bias-voltages, two-probe systems of the single crystalline GaN nanotubes have the I–V properties which reveal that the single-wall GaN nanotube and the single-layer GaN nanotube are semiconducting and the double-layer GaN nanotube appears nearly metallic.
Read moreTopological Lifshitz transitions and Fermi arc manipulation in Weyl semimetal NbAs
Surface Fermi arcs (SFAs), the unique open Fermi-surfaces (FSs) discovered recently in topological Weyl semimetals (TWSs), are unlike closed FSs in conventional materials and can give rise to many exotic phenomena, such as anomalous SFA-mediated quantum oscillations, chiral magnetic effects, three-dimensional quantum Hall effect, non-local voltage generation and anomalous electromagnetic wave transmission. Here, by using in-situ surface decoration, we demonstrate successful manipulation of the shape, size and even the connections of SFAs in a model TWS, NbAs, and observe their evolution that leads to an unusual topological Lifshitz transition not caused by the change of the carrier concentration. The phase transition teleports the SFAs between different parts of the surface Brillouin zone. Despite the dramatic surface evolution, the existence of SFAs is robust and each SFA remains tied to a pair of Weyl points of opposite chirality, as dictated by the bulk topology.
Read moreStudy of metallic materials for solid oxide fuel cell interconnect applications.
Metallic interconnect acts as a gas separator and a gas distributor and therefore, it needs to function adequately in two widely different environments. The interconnect material will be exposed to air on one side and natural gas or coal-derived synthesis gas on the other side. The viable material for the interconnect application must be resistant not only to oxidation but also carburization in hydrocarbon containing low-oxygen environments. In addition, the scales that develop on the exposed surfaces must possess adequate electrical conductivity for them to function as current leads over long service life of the fuel cell. This report addresses five topics of interest for the development of metallic interconnects with adequate performance in fuel cells for long service life. The research conducted over the years and the conclusions reached were used to identify additional areas of research on materials for improved performance of components, especially metallic interconnects, in the complex fuel cell environments. This report details research conducted in the following areas: measurement of area specific electrical resistivity, corrosion performance in dual gas environments by experiments using alloy 446, long term corrosion performance of ferritic and austenitic alloys in hydrogen and methane-reformed synthesis fuel-gas environments, approaches to reduce the area resistance of metallic interconnect, and reduction of electrical resistivity of alumina scales on metallic interconnect. Based on the key requirements for metallic interconnects and the data developed on the corrosion behavior of candidate materials in meeting those requirements, several areas are recommended for further research to develop metallic interconnects with acceptable and reliable long-term performance in solid oxide fuel cells.
Read moreTopological semimetal interface resistivity scaling for vertical interconnect applications
In this work, we explore the electron scattering characteristics at interfaces between normal metals and topological semimetals in bulk as well as in thin film structures. We consider Cu/Ta and CoSi/Ta as representative metal/metal and topological semimetal/metal interface structures, respectively. For bulk interface structures, we find that metal/topological semimetal interfaces have roughly 20× higher interfacial resistivity than normal metal/metal interfaces primarily due to the low electronic density of states, the Fermi level in bulk topological semimetals. For thin films, we find that normal metal/metal interfacial resistivity shows a weak dependence on film thickness and is generally close to the corresponding bulk value. Interfaces between surface-conduction dominated topological semimetals, such as CoSi and normal metals in thin films, however, show decreasing interfacial resistivity with decreasing film thickness. This apparent reduction in interface resistivity originates from the surface-dominated transport, where the total transmission across the interface varies little with reduced film thickness, yielding an effective increase in interface conductivity at smaller dimensions. These results suggest that topological semimetals may be attractive candidates for next-generation interconnect materials with critically small dimensions where interfaces with other metals are ubiquitous.
Read moreWork function of van der Waals topological semimetals: Experiment and theory
The work function (WF) of a material governs the back and forth movement of the charge carriers across the hetero-interface of two materials. Therefore, for optimum device performance, precise knowledge of the WF is prerequisite while employing any new material in electronic devices. In this work, using metal oxide semiconductor capacitors, we experimentally determine the WF of layered van der Waals topological semimetals (TSMs) 1T′-MoTe2, 1T-PtSe2, and Td-WTe2 as 4.87, 5.05, and 4.82 eV, respectively. The experimentally obtained results are corroborated with density functional theory calculations. Furthermore, by analyzing the vertical current transport across the metal oxide semiconductor stack using Fowler–Nordheim tunneling formalism, the barrier height between the TSMs and the gate insulator (SiO2) is experimentally calculated. The obtained barrier heights are also following the same trend as that of WF for three TSMs. These TSMs host unique topological nontrivial phases potentially useful for the development of emerging quantum technologies, and therefore, the findings of this study are significant for designing the future quantum devices.
Read moreCommunication: energy-dependent resonance broadening in symmetric and asymmetric molecular junctions from an ab initio non-equilibrium Green's function approach.
The electronic structure of organic-inorganic interfaces often features resonances originating from discrete molecular orbitals coupled to continuum lead states. An example is molecular junction, individual molecules bridging electrodes, where the shape and peak energy of such resonances dictate junction conductance, thermopower, I-V characteristics, and related transport properties. In molecular junctions where off-resonance coherent tunneling dominates transport, resonance peaks in the transmission function are often assumed to be Lorentzian functions with an energy-independent broadening parameter Γ. Here we define a new energy-dependent resonance broadening function, Γ(E), based on diagonalization of non-Hermitian matrices, which can describe resonances of a more complex, non-Lorentzian nature and can be decomposed into components associated with the left and right leads, respectively. We compute this quantity via an ab initio non-equilibrium Green's function (NEGF) approach based on density functional theory (DFT) for both symmetric and asymmetric molecular junctions, and show that our definition of Γ(E), when combined with Breit-Wigner formula, reproduces the transmission calculated from DFT-NEGF. Through a series of examples, we illustrate how this approach can shed new light on experiments and understanding of junction transport properties in terms of molecular orbitals.
Read moreResistance of Ag-silicene-Ag junctions: A combined nonequilibrium Green's function and Boltzmann transport study
For several years the electronic structure properties of the two-dimensional system silicene have been studied extensively. Electron transport across metal-silicene junctions, however, remains relatively unexplored. To address this issue, we developed and implemented a theoretical framework that utilizes the tight-binding Fisher-Lee relation to span nonequilibrium Green's function (NEGF) techniques, the scattering method, and semiclassical Boltzmann transport theory. Within this hybrid quantum-classical, two-scale framework, we calculated transmission and reflection coefficients of monolayer and bilayer Ag-silicene-Ag junctions using the NEGF method in conjunction with density functional theory; derived and calculated the group velocities; and computed resistance using the semiclassical Boltzmann equation. We found that resistances of these junctions are $\ensuremath{\sim}0.08\phantom{\rule{0.28em}{0ex}}\mathrm{f}\ensuremath{\Omega}\phantom{\rule{0.16em}{0ex}}{\mathrm{m}}^{2}$ for monolayer silicene junctions and $\ensuremath{\sim}0.3\phantom{\rule{0.28em}{0ex}}\mathrm{f}\ensuremath{\Omega}\phantom{\rule{0.16em}{0ex}}{\mathrm{m}}^{2}$ for bilayer ones; factors of $\ensuremath{\sim}$8 and $\ensuremath{\sim}$2, respectively, smaller than Sharvin resistances estimated via the Landauer formalism.
Read moreNonequilibrium Green's functions and atom-surface dynamics: Simple views from a simple model system
We employ Non-equilibrium Green's functions (NEGF) to describe the real-time dynamics of an adsorbate-surface model system exposed to ultrafast laser pulses. For a finite number of electronic orbitals, the system is solved exactly and within different levels of approximation. Specifically i) the full exact quantum mechanical solution for electron and nuclear degrees of freedom is used to benchmark ii) the Ehrenfest approximation (EA) for the nuclei, with the electron dynamics still treated exactly. Then, using the EA, electronic correlations are treated with NEGF within iii) 2nd Born and with iv) a recently introduced hybrid scheme, which mixes 2nd Born self-energies with non-perturbative, local exchange- correlation potentials of Density Functional Theory (DFT). Finally, the effect of a semi-infinite substrate is considered: we observe that a macroscopic number of de-excitation channels can hinder desorption. While very preliminary in character and based on a simple and rather specific model system, our results clearly illustrate the large potential of NEGF to investigate atomic desorption, and more generally, the non equilibrium dynamics of material surfaces subject to ultrafast laser fields.
Read morePerformance analysis of 2 dimensional AIN nMOS transistor with NEGF simulations
Recent focus of the VLSI industry has been on performance enhancement of semiconductors by introducing alternate channel materials. In this work, we have studied electronic properties of 2 dimensional hexagonal shaped aluminum nitride (2D h-AIN) as a channel material in n-MOS transistor. With Density Functional Theory (DFT), we have calculated 2D h-AIN to understand it's electronic properties and carried out non-equilibrium Green's function (NEGF) simulations to study device performance. Our studies reveal good MOS device properties in terms of drain current (86.45 (μA/μm), transconductance (296 (iS/jim) and ON/OFF ratio (1.57 × 104), which enhances the scope of further research on 2D h-AIN FET.
Read moreStudy on transport properties of silicene monolayer under external field using NEGF method
We investigate the current-voltage (I-V) characteristics of a pristine monolayer silicene using non-equilibrium Green function (NEGF) method combining with density functional theory (DFT). This method succeeded in showing the relationship of I and V on silicene corresponding to the electronic characteristics such as density of states. The external field perpendicular to the silicene monolayer affects in increasing of the current. Under 0.2 eV external field, the current reaches the maximum peak at Vb = 0.3 eV with the increase is about 60% from what it is in zero external field.
Read moreQUDEN: A Matlab Package for First‐Principles Quantum‐Transport Engineering of 2D Material‐Based Nanodevices
ABSTRACTThe simulation of nanotransistors and the inclusion of all relevant physics is a challenging task, especially when working with one‐dimensional (1D) nanomaterials in which quantum confinement strongly influences the material properties and device performance. Several groups have already developed state‐of‐the‐art quantum transport simulators based on the first principles non‐equilibrium Green's function (NEGF) formalism, and a few have been commercialized. However, these tools are computationally demanding as they require solving the NEGF and the 3D Poisson equation. Here we present an open‐source quantum‐transport solver for the first principles device engineering for nanoelectronics (QUDEN) implemented in Matlab. QUDEN uses NEGF and the ballistic top‐of‐the‐barrier model to simulate ultrascaled field‐effect transistors (FETs) with channels made of nanoribbons of 2D materials, while the device Hamiltonian is obtained using first principles density functional theory (DFT) in combination with maximally localized Wannier functions (MLWFs). This approach preserves the accuracy of the full NEGF‐3D Poisson simulation in the on‐state while using a simplified self‐consistent electrostatics that leads to a much lower computational burden. Taking monolayer germanium‐selenide (GeSe) nanoribbons as an example, we show that QUDEN can be used for fast screening and accurate evaluation of numerous 2D/1D materials for future FETs.
Read moreRelation between nonequilibrium Green’s function and Lippmann-Schwinger formalism in the first-principles quantum transport theory
In first-principles theory of nonequilibrium quantum transport, there are two main formalisms\char22{}the nonequilibrium Green's function (NEGF) and the Lippmann-Schwinger (LS) equation, which have been applied to a wide range of device physics problems when coupled with electronic structure methods such as the density-functional theory. In this work, we derive a relationship that formally connects the two formalisms at nonequilibrium. The relation is between the nonequilibrium scattering wave function and NEGF and it cannot be derived directly from the LS equation itself. We also found that the relation is practically useful by giving rise to a significant speed up in numerical computation of transmission coefficients for multiprobe systems.
Read moreMechanical and Optical Properties of Topological Semimetal Compound YPtBi
We have reported the mechanical properties of topological semimetals half-Heusler compound YPtBi with LDA and GGA approximation which is implemented in density functional theory. We have calculated elastic parameters which ensure good machinability, covalent bonding, brittleness, low value of Kleinman parameter and high Vickers hardness. Our results reveal the hardness or large resistance of these topological semimetals. Moreover, Born mechanical stability conditions are well fulfilled by the topological semimetal YPtBi. Present study reveals that the low value of bulk modulus and shear modulus wheras high value of Youngs modulus of this topological semimetals which deforms easily with applied external force. We have also calculated optical properties of topological semi-metal YPtBi with both LDA and GGA. Optical properties are calculated in terms of dielectric function and we have calculated dielectric constant, optical reflectivity, absorption co-efficient, optical conductivity, refractive index and electron energy loss in the energy range 0 – 14 eV. We have found higher dielectric constants with GGA in comparison to LDA that imply YPtBi is excellent materials in solar cell applications. Also, YPtBi possess high refractive index in the visible range and it is optically isotropic.
Read moreNano-atomic scale hydrophobic/philic confinement of peptides on mineral surfaces by cross-correlated SPM and quantum mechanical DFT analysis.
The fundamental knowledge of the interaction between biomolecules and mineral surfaces is of utmost importance to drive new technological advancements, particularly for condensation, aggregation, catalysis and exchange of biomolecules. The mineral surface can be used in several fields and applications, for instance in biotechnology, environmental science and remediation, soil science, agro-food and related technology. This kind of knowledge may also provide several suggestions and have implications also for the prebiotic chemistry field, namely the study of the abiotic physicochemical steps that could have led to the 'creation' of the first known living organism. Nowadays, this kind of information at the micro and nanometric scale can be explored with several experimental and theoretical techniques and, among them, atomic force microscopy (AFM)-related methods and density functional theory (DFT) are particularly suited to investigate adsorption processes at single molecule level. In the present work, the specific interaction at the atomic scale between a small peptide (di-glycine) and the (001) surface of clinochlore, a mineral presenting alternately stacked talc-like layers (hydrophilic) and brucite-like sheets (hydrophobic), was characterized by means of a cross-correlated approach combining AFM and DFT simulations. The experiments evidenced the preferential adsorption of di-glycine onto the hydrophobic brucite-like sheet of the mineral, with the observed molecules organized as dot-like (single-molecules), agglomerates, filament-like and network structures by the surface, whereas only very few peptides were imaged onto the hydrophilic talc-like layer. From the theoretical analysis, the most stable conformation of the di-glycine peptide adsorbed on the mineral surface was calculated, and the binding energy analysis of the specific interaction of the molecule, depending on the local chemistry of the substrate, provided fundamental information to interpret end explain the experimental evidence. LAY DESCRIPTION: The present work aims at extending the knowledge of the biomolecules/minerals interaction world. The fundamental knowledge of the interaction between biomolecules and mineral surfaces is of utmost importance to drive the development of new technological advancements, particularly for condensation, aggregation, catalysis and exchange of biomolecules. The mineral surface can be used as substrate in several fields and applications, for instance in biotechnology, environmental science and remediation, soil science, agro-food and related technology. This kind of research may also provide several suggestions and have implications also for the prebiotic chemistry field, namely the study of the abiotic physicochemical steps that could have led to the "creation" of the first known living organism. Nowadays, this kind of research at the micro and nanometric scale can be performed with several experimental techniques and, among them, scanning probe microscopy-related methods are particularly suited to investigate surface adsorption processes at single molecule level. In the present work, the focus is on the specific interaction at the atomic scale between a small peptide (di-glycine) and the surface of clinochlore (a diffuse clay mineral). Clinochlore is a mineral belonging to the phyllosilicate, formed by alternately stacked hydrophilic talc-like layers [chemical formula Mg3 Si4 O10 (OH)2 ] and hydrophobic brucite-like sheets [magnesium hydroxide, Mg(OH)2 ]. Since these two kind of layered structures are held together by weak (van der Waals) forces, the mineral can be easily cleaved along the [001] crystallographic direction (the stacking direction) and the resulting (001) clinochlore surface may presents at the nanoscale some remainders of one layer (brucite-like or talc-like) on the other. This means that this mineral exposes to the environment two different type of surfaces, one hydrophilic and one hydrophobic, which can selectively interact with (adsorb) different type of molecules at the nanoscale. Clinochlore is also one of the 420 mineral species that were likely present on Earth at the time of life's origins, thus it could have played a fundamental role in prebiotic chemistry. In this study, the interaction between di-glycine and clinochlore was characterized by means of both atomic force microscopy (AFM) at the nanometric scale and density functional theory (DFT) simulations, correlating the results of the two methods (cross-correlation approach). The experiments evidenced the preferential adsorption of di-glycine onto the hydrophobic brucite-like sheet of the mineral, with the observed molecules organized as dot-like (single-molecules) structures, agglomerates, filaments and networks by the surface, whereas only very few peptides were imaged onto the hydrophilic talc-like layer. From the theoretical analysis, the most stable conformation of the di-glycine adsorbed on the mineral surface was calculated, and the binding energy analysis of the specific interaction of the molecule, depending on the local chemistry of the substrate, provided fundamental information to interpret end explain the experimental evidence.
Read more