Survey Article About Image Fuzzy Processing Algorithms

With the increasing need for flexibility and adaptivity in computerized systems, the application of fuzzy expert systems is becoming increasingly commonplace in today's industry. Fuzzy logic expert systems often improve performance by allowing knowledge to generalize without requiring the knowledge engineer to anticipate all possible situations. Thus, for many types of applications, soft such as Fuzzy logic can incur lower overhead in terms of representing and engineering task knowledge. My project investigates the application of fuzzy expert systems to motion tracking. Previous research showed that Fuzzy Logic can be used to track the motion of a brightly colored object against a dark background, with relatively low development and run-time costs. The system I am developing identifies, tracks, and predicts the motion of multiple objects using unique identification patterns against a dark background. My poster will describe the fuzzy inference systems for tracking and motion prediction of such objects. An essential step to obtaining the fuzzy inputs for the motion tracking fuzzy inference system is to use convolution correlation data to obtain the centers of mass of the objects. Image processing information from the region around the center of each object provides good fuzzy inputs for recognizing object patterns and determining orientation. I am investigating two fuzzy inference systems for motion tracking and prediction in order to identify their strengths and weaknesses. In the long run, I hope to exploit the strengths of both by dividing the task between the two approaches. The Adaptive Neuro Fuzzy Inference System (ANFIS) is effective for pattern recognition. Fuzzy Proportional Derivative (FPD) is useful for computing errors and tuning inferences. Cascading the two fuzzy systems allows the system first to acquire generalized patterns and then fine-tune them for error tolerance. To perform this work, I am using the Matlab fuzzy logic toolkit, which is a simple and flexible tool for designing fuzzy inference systems.

Over the past two decades, there has been a rapidly growing interest in approximating a nonlinear system by a Takagi-Sugeno (T-S) fuzzy model (Takagi & Sugeno, 1985). In general, this model is represented by using a set of fuzzy rules to describe a global nonlinear system in terms of a set of local linear models which are smoothly connected by fuzzy membership functions. Based on the T-S fuzzy model, recently, various fuzzy controllers have been developed under the so-called parallel-distributed compensation (PDC) scheme (in which each control rule is distributively designed for the corresponding rule of a T-S fuzzy model) and have been widely and successfully applied in fields ranging from aerospace to process control. The reason is because the fuzzy model-based control method provides a natural, simple and effective design approach to complement other nonlinear control techniques that require special and rather involved knowledge. Below are listed the main features of T-S model-based fuzzy control method: 1. It does not require severe structural assumptions on the plant model. 2. It preserves well-understood linear intuition. 3. It is naturally compatible with decompositions of the overall control problem. The decompositions are typically not hierarchical, and the interactions of sub-problems are captured by physical variables that are typically state variables in a more complete model of the overall system. 4. It enables control systems to respond rapidly to changing operating conditions. For this reason, it is important that the selected physical variables reflect changes in plant dynamics as operating conditions change. In fact, the T-S model-based fuzzy control method (of divide and conquer type) constructs a nonlinear controller, with certain required dynamic properties, by combining, in some sense, the members of appropriate family of linear time-invariant controllers. Here, nonlinear control design task is broken into a number of linear sub-problems, which enable linear design methods to be applied to nonlinear problems. Within the general framework of the T-S fuzzy model-based control method, a flurry of research activities have quickly yielded many important results on the design of fuzzy control systems by means of the following Lyapunov function approaches: 1. Common quadratic Lyapunov function approach (Tanaka & Sugeno, 1992; Tanaka et al, 1996; Wang et al, 1996; Cao & Frank, 2000; Assawinchaichote, 2004).

Fuzzy Sets and Fuzzy Logic were introduced by Lotfi Zadeh in 1965 in his seminal paper [71]. During the last decade of the previous century there was an increase of the various applications of fuzzy logic-based systems mainly due to the introduction of fuzzy logic controllers (FLC) by Ebrahim Mamdani in 1975 [54], the introduction of the fuzzily blended linear systems construct called Takagi–Sugeno (TS) fuzzy systems in 1985 [65], and the the oretical proof that FRB systems are universal approxima tors (that is any arbitrary non-linear function in the [0; 1] range can be asymptotically approximated by a FRB system [68]). Historically, the FRB systems where first being designed based entirely or predominantly on human expert knowledge [54,71]. This offers advantages and was a novel technique at that time for incorporating uncertain, subjective information, preferences, experience, intuition, which are difficult or impossible to be described other- wise. However, it poses enormous difficulties for the pro cess of designing and routine use of these systems, especially in real industrial environments and in on-line and real-time modes. TS fuzzy systems made possible the de- velopment of efficient algorithms for their design not only in off-line, but also in on-line mode [14]. This is facili- tated by their dual nature – they combine a fuzzy linguistic premise (antecedent) part with a functional (usually linear) consequent part [65]. With the invention of the concept of EFS [2,5] the problem of the design was completely automated and data-driven. Thismeans, EFS systems self-develop their model, respectively system structure as well as adapt their parameters “from scratch” on the fly using experimental data and efficient recursive learning mechanisms. Human expert knowledge is not compulsory, not limiting, not essential (especially if it is difficult to obtain in real-time). This does not necessarily mean that such knowledge is prohibited or not possible to be used. On the contrary, the concept of EFS makes possible the use of such knowledge in initialization stages, even during the learning process itself, but this is not essential, it is optional. Examples of EFS are intelligent sensors for oil refineries [52,53], autonomous self-localization algorithms used by mobile robots [75,76], smart agents for machine health monitoring and prognosis in the car industry [30], smart systems for automatic classification of images in CD production process [51] etc. This is a new promising area of research and new applications in different branches of industry are emerging. (c) Springer Verlag

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vi

The expansive growth of information on the Internet has led to new developments in computer vision technology and image processing techniques. Since stone inscriptions are subject to erosion and polishing by the external environment for years, it is difficult to extract image and text information. In this study, the fuzzy control theory is combined with edge detection technology for image edge detection. Firstly, a suitable fuzzy rule and affiliation function are set, then a fuzzy control system is used to extract and detect the image edge information, and then a fuzzy logic rule-based edge detection algorithm is proposed to detect the inscription images. To test the performance of the algorithm, the detection effect of the image is first analyzed from a subjective perspective. The experimental results show that the proposed algorithm has better edge detection for both inscription and lena images, with better noise suppression without excessive distortion, and clearer inscription images. The proposed algorithm has the lowest MSE value of 41.26 when the detection object is the lena image b, and the highest PSNR value of 33.84 when the detection object is the lena image a. The proposed algorithm has the lowest MSE value of 41.26 when the detection object is the lena image b, and the highest PSNR value of 41.26 when the detection object is the lena image b. The proposed algorithm has the highest PSNR value of 33.84 when the detection object is the lena image b. In summary, the analysis of both subjective and objective indicators shows that the inscription image processing algorithm used in this paper has better processing effect, and the processed images become clearer with less distortion, which is helpful for both inscription image and text extraction.

Retraction notice

Many bridges in Taiwan have been in use from the period that Taiwan was governed by the Japanese, over 50 years ago, which is the average ultimate usable lifetime of such structures. Three-quarters of the bridges on major highways have been in use for more than 20 years and numerous bridges on country roads have also been in use for more than 20 years. In other words, most of the bridges in Taiwan are aging and may require repair or replacement. Ambient vibration tests are utilized to measure the response of old bridges, which are difficult to equip with accelerometers. The Fourier transform method is traditionally used to gain important information about ambient vibration records. However, the development of information technology over the last 20 years has meant that there are more kinds of signal management technologies, including the wavelet and Hilbert—Huang transform (HHT) methods. In this study we investigate the characteristics of aging bridges by comparison with their structural properties. We analyze their ambient vibration, and discuss the possible influence of the frequency function. Long-term environmental impacts create many structural problems, but with traditional methods examination of bridge health is difficult. Therefore, in our HHT management system, we examine destroyed bridges. The characteristics and behavior of bridges subjected to random loading can be understood by analysis with the random decrement technique and the frequency response function method.

Retraction notice

Abstract- This paper introduces a linear structure of wind turbine, operator and the pitch angle controller. Then, a new method of adaptive fuzzy on the variable speed wind turbines was provided and it was compared with PID and Fuzzy Logic Control ler and the simulation results were analyzed. So when the results of each simulation using PID and Fuzzy controllers and adaptive fuzzy PID controllers provided, the observed advantages and disadvantages of the rotor speed and wind turbine power can be introduced. It can be seen that in PID method the high overshoot is discussed as a disadvantage while it is overcome by using fuzzy controller and overshoot will decrease. The time of reaching to a sustained speed increases slightly and in adaptive fuzzy PID controller, the less overshoot has provided a good and effective performance for system response. The use of adaptive fuzzy PID controller causes the system does not have any steady-state error and at all moments of time, the response rate is better than PID and fuzzy controller. The importance of the amount of overshoot and rate fluctuations is that by reducing these parameters in addition to reducing the cost of preventive care, maintenance and depreciation, the fluctuations in electricity generated by induction generator also greatly reduced.

Research on A Fuzzy Adaptive PID Control Method for Four Rotor UAV Control System With the continuous improvement of national living standards, people have higher and higher requirements for the reliability of power supply. The emergence of unmanned aerial vehicle inspection technology provides a new idea to solve the contradiction between the increasing equipment scale and the increasing inspection requirements. However, at present, the stability of the traditional proportion integration differentiation (PID) control system of the four rotor unmanned aerial vehicle (UAV) is not high enough. During the inspection, there are accidents of drones hitting power equipment from time to time. In view of the above problems, this paper studies the fuzzy adaptive PID control method to support the stable flight of four rotor UAV. The principle of fuzzy control is analyzed. The fuzzy control method and PID control method are deeply integrated. A fuzzy adaptive PID control system is designed. The universe and membership function of the relevant control parameters of the system are formulated. The tuning rules of fuzzy adaptive PID control system are formulated. Finally, the improved control system is simulated. The simulation results show that the fuzzy adaptive PID control algorithm can effectively improve the stability, reliability and emergency ability of UAV. This method can effectively improve the adaptability of UAV to perform complex missions in complex environments. The research results have guiding significance for expanding the application field of UAV.

This paper describes a fuzzy control method to control the output voltage of the three-phase Z-source PWM rectifier. A fuzzy control system is a control system based on fuzzy logic, and the fuzzy controller uses a single input fuzzy theory with its fuzzification. Analytical structure of the simplest fuzzy controller is derived through the triangular membership functions with its fuzzification. By setting the membership functions of the fuzzy rules, fuzzy control is achieved. The PI portion of the output DC voltage controller is controlled by fuzzy method. To confirm the validity of the proposed method, the simulation and experiment were performed, The simulation is performed with PSIM and MATLAB/SIMULINK. For the experiment, we used a DSP(TMS320F28335) controller to compute the reference value and generate the PWM pulses. For the transient state performance of the output DC voltage control of Z-source PWM rectifier, the PI controller and fuzzy controller were compared, also the conventional PWM rectifier and Z-source PWM rectifier were compared. From the results, the Z-source rectifier could allow to buck or boost of the output DC voltage. Through the analysis of the transient state, we could observe that the fuzzy controller has better performance than the conventional PI controller.

로봇들의 협동 작업을 위해서는 다양한 환경에서 다른 로봇들을 인식하고 추적하는 기술이 요구된다. 본 논문에서는 코드북 모델과 스테레오 영상 처리를 이용하여 이동 로봇을 인식하고, 퍼지 제어기를 사용해 추적하는 이동 로봇 추적 제어 시스템을 제안한다. 먼저 코드북 모델을 사용하여 영상의 전경과 배경을 분리하였다. 분리된 전경에서 색상정보를 기반으로 관심영역을 구해내고, 스테레오 영상처리를 통해 얻은 깊이 영상을 기반으로 이동 로봇까지의 실제 거리를 추정한다. 각 거리에 따라 열림 및 닫힘 연산을 적용하고, 모듈형 로봇의 크기에 맞춰 라벨링을 통해 효과적으로 이동 로봇을 인식한다. 추출된 이동 로봇의 움직임에 따른 효과적인 추적을 위하여 스테레오 영상 처리를 통해 얻은 거리 정보와 로봇의 이동 정보를 이용해 퍼지 제어기를 설계하여 이동 로봇 추적 시스템을 제안하였다. 제안한 퍼지 추적 제어 시스템의 성능은 실제 이동 로봇의 추적 실험을 통하여 검증하였다. Tracking and recognition of robots are required for the cooperation task of robots in various environments. In the paper, a tracking control system of moving robot using stereo image processing, code-book model and fuzzy controller is proposed. First, foreground and background images are separated by using code-book model method. A candidate region is selected based on the color information in the separated foreground image and real distance of the robot is estimated from matching process of depth image that is acquired through stereo image processing. The open and close processing of image are applied and labeling according to the size of mobile robot is used to recognize the moving robot effectively. A fuzzy tracking controller using distance information and mobile information by stereo image processing is designed for effective tracking according to the movement velocity of the target robot. The proposed fuzzy tracking control method is verified through tracking experiments of mobile robots with stereo camera.

This paper proposes the design of fuzzy logic controllers to revolve a wheeled mobile robot (WMR) through digital images, and the design of WMR anti-collision system. After the image processing, the authors utilize the center of object image to design the fuzzy logic controllers that incorporate expert knowledge in terms of 9 linguistic rules to drive the WMR to revolve. By the way, the WMR can execute auto moving and anti-collision via infrared sensors. The program codes of fuzzy logic controllers are implemented on a PC which could send all the motion commands to the WMR by wireless communication.

Research on adaptive deformable mirror technology for voice coil actuators is an important trend in the development of large ground-based telescopes. A voice coil adaptive deformable mirror contains a large number of actuators, and there are problems with structural coupling and large temperature increases in their internal coils. Additionally, parameters of the traditional proportional integral derivative control cannot be adjusted in real-time to adapt to system changes. These problems can be addressed by introducing fuzzy control methods. A table lookup method is adopted to replace real-time calculations of the regular fuzzy controller during the control process, and a prototype platform has been established to verify the effectiveness and robustness of this process. Experimental tests compare the control performance of traditional and fuzzy proportional integral derivative controllers, showing that, in system step response tests, the fuzzy control system reduces rise time by 20.25%, decreases overshoot by 78.24%, and shortens settling time by 67.59%. In disturbance rejection experiments, fuzzy control achieves a 46.09% reduction in the maximum deviation, indicating stronger robustness. The fuzzy proportional integral derivative controller, based on table lookup, outperforms the standard controller significantly, showing excellent potential for enhancing the dynamic performance and disturbance rejection capability of the voice coil motor actuator system.

Based on parameter self-tuning fuzzy PID controller, a fuzzy inference method is utilized to realize automatic regulating PID parameter, and the application of the controller in a system is studied with MATLAB in this paper. The combination of PID controller system and fuzzy controller system combines the convenience of PID control together with the flexibility of fuzzy control, and takes advantage of the traditional control, which has a great practical significance. The results of simulation show that fuzzy PID parameter self-tuning controller has a better control effect than the traditional one, and can improve the static and dynamic properties of the system well. DOI: http://dx.doi.org/10.11591/telkomnika.v14i2.7674