- Research Article
37
- 10.1016/j.foodcont.2011.07.006
Prediction of TVB-N content in eggs based on electronic nose
- Jul 20, 2011
- Food Control
- Peng Liu + 1 more +1
Prediction of TVB-N content in eggs based on electronic nose
Power coal rate is an important index to evaluate the overall economic performance of coal-fired power plant. It is however difficult to describe and optimize this feature in different operation conditions because of higher dimension, nonlinear and complex system configuration. An optimized support vector regression (SVR) model was built to predict the power coal rate of power unit, in which the prediction performance of SVR model was optimized by introducing genetic algorithm (GA) to optimize the parameters of SVR model. Considering different boundary parameters, load demand and operation conditions, we built the GA-SVR-based power coal rate model of large coal-fired power unit. The main factors contributing to such model such as the sampling scale, attribute number and specific operators in GA were discussed. The results indicate that the modeling performance is significantly improved in accuracy, searching efficiency and model simplicity; in addition, the model can be conveniently generalized for different types of power units.
Prediction of TVB-N content in eggs based on electronic nose
Prediction of TVB-N content in eggs based on electronic nose
The study of norm vacuum for duplex pressure condenser based on support vector regression and genetic algorithm
A method to determine the norm vacuum of duplex pressure condenser based on the support vector regression (SVR) model was proposed, The norm vacuum of condenser is usually obtained from the characteristic curve given by the manufactory. But the method is only fit for the condition that both of the flow of cooling water and exhaust steam of steam turbine are maintained at designed valves. In this paper, the factors which affected the norm vacuum of condenser were analyzed, and then a new method was studied with SVR model's parameters optimized by genetic algorithm (GA). Data from duplex pressure condenser of a 600MW unit were validated by the proposed method. The results show that the SVR model has high prediction accuracy and very strong stability. The studying results fall foundations for diagnosing the faults of low vacuum for condenser.
Read moreCapillary water absorption values estimation of building stones by ensembled and hybrid SVR models
The absorption of capillary water is one of the most crucial factors in the flow of groundwater in rocks (CWA). Although meticulous experimental studies are needed to determine a rock’s CWA, predictive techniques might cut down on the expense and effort. There are various data mining methods for this purpose, but the considered algorithms in this study were not proposed so far for predicting the CWA. Different rock samples were taken for this purpose from various locations, yielding diverse rocks. For the prediction procedures, four support vector regression (SVR) models were created: a traditional SVR, two ensembled models, and a hybrid SVR model using the whale optimization technique (WOA - SVR). Results show that all models have acceptable performance in predicting the CWA with R2 larger than 0.797 and 0.806 for the training and testing data, respectively, representing the acceptable correlation between observed and predicted values. Regarding developed models, the conventional SVR model has the worst performance of all models. All statistical evaluation criteria were improved by assembling models, which present the ability of additive regression and bagging predictions in improving prediction processes. The hybrid WOA - SVR model has the best performance considering all indices. This hybrid model could also gain the lowest values of error indices between all SVR models, which leads to outperforming the WOA - SVR model compared to other methods.
Read moreTwice clustering based hybrid model for short-term passenger flow forecasting
Short-term metro passenger flow prediction plays a great role in traffic planning and management, and it is an important prerequisite for achieving intelligent transportation. So, a novel hybrid Support Vector Regression (SVR) model based on Twice Clustering (TC) is proposed for short-term metro passenger flow prediction. The training sets and test sets are generated by TC with respect to values of passenger flow in different time periods to improve the prediction accuracy. Furthermore, each obtained cluster is decomposed by using the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) algorithm and the Ensemble Empirical Mode Decomposition (EEMD) algorithm, respectively. The volatility of each component obtained after decomposition is further reduced. Then, the SVR model optimized by the Grey Wolf Optimization (GWO) algorithm is used to predict the decomposed components. Moreover, forecast based on one-month data from Xi’an Metro Line 2 Library Station (China). By comparing the prediction results of the TC condition, the Once Clustering (OC) condition and the non-clustering condition, it shows that the TC approach can adequately model the volatility and effectively improve the prediction accuracy. At the same time, experimental results show that the novel hybrid TC–CEEMDAN–GWO–SVR model has superior performance than Genetic Algorithm (GA) optimized SVR (SVR–GA) model and hybrid Back Propagation Neural Network (BPNN) model.
Read moreSupport vector regression with genetic algorithms in forecasting tourism demand
Support vector regression with genetic algorithms in forecasting tourism demand
An Application Of Hybrid Firefly And Pso With Support Vector Regression For Modeling A Clarifier Process In Sugar Industry
In this paper, Support Vector Regression (SVR) with the Particle Swarm Optimization algorithm (PSO) and SVR with Firefly algorithm (FFA) is used to model the clarifier process of sugar industry. Generally, SVR model is involved in mapping the nonlinear structure for nonlinear regression. Hybrid structure of SVR with PSO-FFA is involved in the modeling of nonlinear process. The proposed method is has improved its efficient characteristics in the process of maintaining the neutralized value of pH. The performances of proposed methods are compared and the result were obtained which shows the effectiveness of the proposed hybrid algorithm. The results proves to be effective for using in the real-time complex industrial problems.
Read moreA stacking ensemble model for predicting soil organic carbon content based on visible and near-infrared spectroscopy
A stacking ensemble model for predicting soil organic carbon content based on visible and near-infrared spectroscopy
Nonlinear QSAR models with high-dimensional descriptor selection and SVR improve toxicity prediction and evaluation of phenols on Photobacterium phosphoreum
Nonlinear QSAR models with high-dimensional descriptor selection and SVR improve toxicity prediction and evaluation of phenols on Photobacterium phosphoreum
Read moreRepresentation of Vapor-Liquid Equilibria Properties for Binary Mixtures Containing R1234ze(E) using Machine Learning Models
It is necessary to develop general and efficient models for the representation of vapor-liquid equilibria (VLE) for the binary mixtures containing R1234ze(E) which will be new alternatives to conventional refrigerants. This work investigates the applicability of four machine learning models, including K-nearest neighbor (KNN), support vector regression (SVR), random forests (RF), and multi-layer perceptron (MLP), in representing VLE for 10 binary mixtures. The accuracy, stability, computational complexity and extrapolation ability of these machine learning models are analyzed and compared with two thermodynamic models including Soave–Redlich–Kwong (SRK) and Peng–Robinson (PR). The results show the KNN, RF and MLP models are not suitable to accurately represent the experimental pressure and vapor-phase mole fraction. The SVR model is the most accurate machine learning model in representing the experimental pressure with a mean absolute relative error of 0.71%, basically as accurate as the PR and SVR models. Meanwhile, the SVR model describes the experimental vapor-phase mole fraction more accurately with a mean absolute error of 0.0049 compared to the PR and SVR models. In addition, the SVR model has a low running-time cost and a certain extent of extrapolation ability.
Read morePrediction of maximum pitting corrosion depth in oil and gas pipelines
Prediction of maximum pitting corrosion depth in oil and gas pipelines
Predicting Blast-Induced Ground Vibration in Open-Pit Mines Using Vibration Sensors and Support Vector Regression-Based Optimization Algorithms
In this study, vibration sensors were used to measure blast-induced ground vibration (PPV). Different evolutionary algorithms were assessed for predicting PPV, including the particle swarm optimization (PSO) algorithm, genetic algorithm (GA), imperialist competitive algorithm (ICA), and artificial bee colony (ABC). These evolutionary algorithms were used to optimize the support vector regression (SVR) model. They were abbreviated as the PSO-SVR, GA-SVR, ICA-SVR, and ABC-SVR models. For each evolutionary algorithm, three forms of kernel function, linear (L), radial basis function (RBF), and polynomial (P), were investigated and developed. In total, 12 new hybrid models were developed for predicting PPV in this study, named ABC-SVR-P, ABC-SVR-L, ABC-SVR-RBF, PSO-SVR-P, PSO-SVR-L, PSO-SVR-RBF, ICA-SVR-P, ICA-SVR-L, ICA-SVR-RBF, GA-SVR-P, GA-SVR-L and GA-SVR-RBF. There were 125 blasting results gathered and analyzed at a limestone quarry in Vietnam. Statistical criteria like R2, RMSE, and MAE were used to compare and evaluate the developed models. Ranking and color intensity methods were also applied to enable a more complete evaluation. The results revealed that GA was the most dominant evolutionary algorithm for the current problem when combined with the SVR model. The RBF was confirmed as the best kernel function for the GA-SVR model. The GA-SVR-RBF model was proposed as the best technique for PPV estimation.
Read moreMachine Learning Models for Energy Prediction in a Low Carbon Building
Globally, buildings are responsible for an estimated 40% of energy consumption and 33% of CO2 emissions. In a bid to reduce CO2 emissions and hence, global warming, it has become necessary to ensure the energy efficient construction and operation of buildings. Understanding how a building utilises energy is a critical step to increase its efficiency. In this study, we leverage on an open-source data obtained from UCI data repository. Exploratory data analysis and feature engineering were used to eliminate non-contributing features while identifying key attributes of the data for model training. Linear Regression (LR) and Support Vector Regression (SVR) were employed as the machine learning techniques for the study. The models were trained using a repeated cross-validation technique. The models’ performance was evaluated on an independent data set segregated for testing. The LR model was trained with nine out of thirty-three features, while the Support Vector Regression (SVR) model used twenty-eight features for its training. The SVR model had a higher variance (0.48), accuracy (92.41%), and lower Mean Absolute Percentage Error (MAPE) of 7.59% compared to the LR model's variance of 0.26, accuracy of 91.87%, and MAPE of 8.13%. The SVR model was more accurate in predicting energy consumption, as it showed better accuracy on the test set with lower MAPE and higher R-squared value. Both models outperformed a relatively complex and computationally expensive model in a previous study. It also identified areas with high energy consumption which could be used to inform the building's energy management strategy.
Read moreMonthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform
Monthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform
Read moreProposing a hybrid metaheuristic optimization algorithm and machine learning model for energy use forecast in non-residential buildings
The building sector is the largest energy consumer accounting for 40% of global energy usage. An energy forecast model supports decision-makers to manage electric utility management. Identifying optimal values of hyperparameters of prediction models is challenging. Therefore, this study develops a novel time-series Wolf-Inspired Optimized Support Vector Regression (WIO-SVR) model to predict 48-step-ahead energy consumption in buildings. The proposed model integrates the support vector regression (SVR) and the grey wolf optimizer (GWO) in which the SVR model serves as a prediction engine while the GWO is used to optimize the hyperparameters of the SVR model. The 30-min energy data from various buildings in Vietnam were adopted to validate model performance. Buildings include one commercial building, one hospital building, three authority buildings, three university buildings, and four office buildings. The dataset is divided into the learning data and the test data. The performance of the WIO-SVR was superior to baseline models including the SVR, random forests (RF), M5P, and decision tree learner (REPTree). The WIO-SVR model obtained the highest value of correlation coefficient (R) with 0.90. The average root-mean-square error (RMSE) of the WIO-SVR was 2.02 kWh which was more accurate than those of the SVR model with 10.95 kWh, the RF model with 16.27 kWh, the M5P model with 17.73 kWh, and the REPTree model with 26.44 kWh. The proposed model improved 442.0–1207.9% of the predictive accuracy in RMSE. The reliable WIO-SVR model provides building managers with useful references in efficient energy management.
Read moreHigh Resolution Models of Transcription Factor-DNA Affinities Improve In Vitro and In Vivo Binding Predictions
Accurately modeling the DNA sequence preferences of transcription factors (TFs), and using these models to predict in vivo genomic binding sites for TFs, are key pieces in deciphering the regulatory code. These efforts have been frustrated by the limited availability and accuracy of TF binding site motifs, usually represented as position-specific scoring matrices (PSSMs), which may match large numbers of sites and produce an unreliable list of target genes. Recently, protein binding microarray (PBM) experiments have emerged as a new source of high resolution data on in vitro TF binding specificities. PBM data has been analyzed either by estimating PSSMs or via rank statistics on probe intensities, so that individual sequence patterns are assigned enrichment scores (E-scores). This representation is informative but unwieldy because every TF is assigned a list of thousands of scored sequence patterns. Meanwhile, high-resolution in vivo TF occupancy data from ChIP-seq experiments is also increasingly available. We have developed a flexible discriminative framework for learning TF binding preferences from high resolution in vitro and in vivo data. We first trained support vector regression (SVR) models on PBM data to learn the mapping from probe sequences to binding intensities. We used a novel -mer based string kernel called the di-mismatch kernel to represent probe sequence similarities. The SVR models are more compact than E-scores, more expressive than PSSMs, and can be readily used to scan genomics regions to predict in vivo occupancy. Using a large data set of yeast and mouse TFs, we found that our SVR models can better predict probe intensity than the E-score method or PBM-derived PSSMs. Moreover, by using SVRs to score yeast, mouse, and human genomic regions, we were better able to predict genomic occupancy as measured by ChIP-chip and ChIP-seq experiments. Finally, we found that by training kernel-based models directly on ChIP-seq data, we greatly improved in vivo occupancy prediction, and by comparing a TF's in vitro and in vivo models, we could identify cofactors and disambiguate direct and indirect binding.
Read more